HEY MSI. READ THIS (regarding ICH5R and compatibility with WD Raptors)

The following issue has not been resolved. Seems like several people have given up and are just using the onboard Promise controller.
Thread on issues regarding WD Raptors configured in RAID via ICH5R
Does it not suprise you that nobody is using Raptors on the ICH5R?? hmmm?? (Maybe because they can't.)
I have requested RMA service with Western Digital to try different hard drives. Now I am on my 2nd RMA. If it does not work (even with both drives using the B5P bridgechip) then IT IS CLEAR THAT YOUR MOTHERBOARD WAS MANUFACTURED WITH A DEFECT. And thus people using this board who want to use RAID with 2 Raptor drives on the ICH5R should be entitled to a replacement board or even their money back. I AM NOT JOKING. I think it's something quite serious because the need and demand from users are being neglected and it seems as though MSI won't bother trying to resolve this issue and hopes to silence this issue by ignoring it.
Mods... please do not delete or lock this thread. And people who are still in the same boat as I am and are just about to give up or have done so already... please let your voices be heard here!
When I get my 2nd replacement Raptor (hopefully it's a B5P) I will do further testing and let everyone know if it solves the issue.

Interestingly, I bought my raptors before I came across this thread, and found that I had problem of having my raptors being detected by the ICH5R. At that time, I also have a HighPoint 1520 Raid PCI card on my mobo.
Guess what, after I removed the HighPoint 1520 Raid PCI card, I am able to have my raptors plug to the ICH5R connectors and being detected. I'm running it at Raid 0 now, as my boot drive.
The two raptors' DCM is HBCAJAB, not sure if this information is useful. Both drives were made in Malaysia.
The thread I am referring to https://forum-en.msi.com/addreply.php?threadid=43273&sid=.

Similar Messages

I have just reinstalled Adobe Acrobat X1 and I can't save any PDF's that are emailed to me. I just get "This document could not be saves. There is a problem reading this document (21)" and then when I click OK i get "insufficient data for image" Help!

I have just reinstalled Adobe Acrobat X1 and I can't save any PDF's that are emailed to me. I just get "This document could not be saves. There is a problem reading this document (21)" and then when I click OK i get "insufficient data for image" Help!

More information about this issue can be found here:
https://forums.adobe.com/thread/1672655
A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
Then download each of the individual updates and run them sequentially.
I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
Adobe Reader 11.0 - Multilingual (MUI) installer    AdbeRdr11000_mui_Std
Adobe Reader 11.0.01 update - Multilingual (MUI) installer    AdbeRdrUpd11001_MUI.msp
Adobe Reader 11.0.02 update - All languages    AdbeRdrSecUpd11002.msp
Adobe Reader 11.0.03 update - Multilingual (MUI) installer    AdbeRdrUpd11003_MUI.msp
Adobe Reader 11.0.04 update - Multilingual (MUI) installer    AdbeRdrUpd11004_MUI.msp
Adobe Reader 11.0.05 security update - All languages    AdbeRdrSecUpd11005.msp
Adobe Reader 11.0.06 update - Multilingual (MUI) installer    AdbeRdrUpd11006_MUI.msp
Adobe Reader 11.0.07 update - Multilingual (MUI) installer    AdbeRdrUpd11007_MUI.msp
Adobe Reader 11.0.08 security update - All languages    AdbeRdrSecUpd11008.msp

Can anyone read this Console log and tell me what is "librariand" ?

I've been having "librariand" showing up every 2-3 minutes in my log. can anyone read this Console log and tell me what is "librariand" and what's the problem behind this ?
11-08-14 9:53:37.009 AM librariand: new client - cancelling idle timeout
11-08-14 9:53:37.010 AM librariand: no ubiquity account configured, not creating collection
11-08-14 9:53:37.010 AM librariand: error in handle_client_request: LibrarianErrorDomain/10/Unable to configure the collection.
11-08-14 9:53:37.010 AM librariand: client connection is invalid: Connection invalid
11-08-14 9:53:37.010 AM librariand: no clients - starting idle timer
11-08-14 9:53:37.011 AM librariand: new client - cancelling idle timeout
11-08-14 9:53:37.011 AM librariand: no ubiquity account configured, not creating collection
11-08-14 9:53:37.012 AM librariand: error in handle_client_request: LibrarianErrorDomain/10/Unable to configure the collection.
11-08-14 9:53:37.012 AM librariand: client connection is invalid: Connection invalid
11-08-14 9:53:37.012 AM librariand: no clients - starting idle timer
11-08-14 9:53:37.013 AM librariand: new client - cancelling idle timeout
11-08-14 9:53:37.014 AM librariand: no ubiquity account configured, not creating collection
11-08-14 9:53:37.014 AM librariand: error in handle_client_request: LibrarianErrorDomain/10/Unable to configure the collection.
11-08-14 9:53:37.015 AM librariand: client connection is invalid: Connection invalid
11-08-14 9:53:37.015 AM librariand: no clients - starting idle timer
11-08-14 9:53:37.015 AM librariand: new client - cancelling idle timeout
11-08-14 9:53:37.015 AM librariand: no ubiquity account configured, not creating collection
11-08-14 9:53:37.016 AM librariand: error in handle_client_request: LibrarianErrorDomain/10/Unable to configure the collection.
11-08-14 9:53:37.016 AM librariand: client connection is invalid: Connection invalid
11-08-14 9:53:37.016 AM librariand: no clients - starting idle timer
11-08-14 9:53:37.017 AM librariand: new client - cancelling idle timeout
11-08-14 9:53:37.017 AM librariand: no ubiquity account configured, not creating collection
11-08-14 9:53:37.017 AM librariand: error in handle_client_request: LibrarianErrorDomain/10/Unable to configure the collection.
11-08-14 9:53:37.018 AM librariand: client connection is invalid: Connection invalid
11-08-14 9:53:37.019 AM librariand: no clients - starting idle timer
11-08-14 9:56:39.802 AM librariand: new client - cancelling idle timeout
11-08-14 9:56:39.803 AM librariand: no ubiquity account configured, not creating collection
11-08-14 9:56:39.803 AM librariand: error in handle_client_request: LibrarianErrorDomain/10/Unable to configure the collection.
11-08-14 9:56:39.804 AM librariand: client connection is invalid: Connection invalid
11-08-14 9:56:39.804 AM librariand: no clients - starting idle timer
11-08-14 9:57:11.575 AM librariand: new client - cancelling idle timeout
11-08-14 9:57:11.576 AM librariand: no ubiquity account configured, not creating collection
11-08-14 9:57:11.576 AM librariand: error in handle_client_request: LibrarianErrorDomain/10/Unable to configure the collection.
11-08-14 9:57:11.577 AM librariand: no ubiquity account configured, not creating collection
11-08-14 9:57:11.577 AM librariand: error in handle_client_request: LibrarianErrorDomain/10/Unable to configure the collection.
11-08-14 9:57:11.577 AM librariand: client connection is invalid: Connection invalid
11-08-14 9:57:11.577 AM librariand: no clients - starting idle timer

I completely uninstalled the following:
Removed Evernote.app
Removed User/Library/Preferences/com.evernote.Evernote.plis
Removed User/Library/Applications Support/Evernote
and still get to see these logs when restart:
11-08-14 7:57:03.263 PM librariand: new client - cancelling idle timeout
11-08-14 7:57:03.263 PM librariand: no ubiquity account configured, not creating collection
11-08-14 7:57:03.263 PM librariand: error in handle_client_request: LibrarianErrorDomain/10/Unable to configure the collection.
11-08-14 7:57:03.264 PM helpd: unable to get sandbox extensions: The operation couldn’t be completed. (LibrarianErrorDomain error 10 - Unable to configure the collection.)
11-08-14 7:57:03.265 PM librariand: no ubiquity account configured, not creating collection
11-08-14 7:57:03.265 PM librariand: error in handle_client_request: LibrarianErrorDomain/10/Unable to configure the collection.
11-08-14 7:57:03.265 PM librariand: client connection is invalid: Connection invalid
11-08-14 7:57:03.265 PM librariand: no clients - starting idle timer
11-08-14 7:57:13.753 PM librariand: new client - cancelling idle timeout
11-08-14 7:57:13.767 PM librariand: no ubiquity account configured, not creating collection
11-08-14 7:57:13.767 PM librariand: error in handle_client_request: LibrarianErrorDomain/10/Unable to configure the collection.
any other solution ?

Problems with Apple Preview filled forms and compatibility with Windows?

Anyone else having problems with Apple Preview filled out forms and compatibility with Microsoft Windows after Lion?
I've had it happen recently with two different people, where the data I had entered on a fillable PDF form could not be seen by Microsoft Windows, but I saw my data just fine.
I don't know what version of Adobe Acrobat they were running.
Thanks,
kt

You will get that first message when the document has been changed in a way that invalidates the internal digital signature that's applied when a document is Reader-enabled. Certain changes are allowed (e.g., filling fields, commenting, signing) and will not invalidate the signature, but others are not. The exact cause of the change is often hard to track down, but it can be due to font problems, some type of file corruption, or something that Acrobat/Reader attempts to correct when the file is opened/saved. You will also get the message if the users system time is not correct and is currently set to some time before the document was Reader-enabled. It seems best to use the most recent version of Acrobat to enabled the documents and recent versions of Reader to work with them.
It problem is probably not related to the user using anything in the Sign pane.

Appleworks docs and compatibility with iWorks application?

Appleworks docs and compatibility with iWorks application? Does it exists? I do not have iWorks and will soon be upgrading my op sys to 10.4 (it really is in the mail) I currentl have 10.2.8
I use AppleWorks a great deal. Does iWorks replace it? or enhance it?
Will AppleWorks be upgraded or is 6.2.9 the last iteration?

Welcome to Apple Discussions SYGWS
iWork (no "s") is not an application, but the name given to the package of two applications, Keynote & Pages.
Keynote is a presentation application that can open AppleWorks 6 presentation files & PowerPoint files. I haven't use Keynote other than to view a few presentation. You probably can find a lot of information by searching the Keynote forum.
Pages is the word processing/page layout application in iWork. Pages is able to open AppleWorks 6 word processing document as well as Word, text & RTF documents. It is not able to open any other AppleWorks documents or older Word documents (I'm not sure how far back it goes). Pages 1 (iWork '05) will not display floating spreadsheet frames in AppleWorks 6 word processing documents, Pages 2 can. Pages 2 has limited spreadsheet functions available in tables (as does Keynote 3, both in iWork '06). Pages can export as PDF, Word, plain text, RTF & HTML (HTML export is disappointing to say the least). It cannot export as AppleWorks (any version).
No one here knows for sure if AppleWorks will ever get another update & those that do have signed non-disclosure agreements, but it is extremely unlikely. In the iWork ’05 press release iWork is said to be "building the successor to AppleWorks."
Many users here, like me, use Pages for what it does so well & AppleWorks for what it does that iWork doesn't (at least not yet) - databases, spreadsheets & drawing.

Read this: cocoon , ejb and jboss

hi all ,
read this , working on cocoon .
Integrating cocoon with jBoss
Download cocoon-war-2.1.7.war and then we have to
deploy that to the jboss server , to deploy that , we
started jboss server in standard mode and then copied
the cocoon war file to
/usr/local/jboss-4.0.0/server/standard/deploy/ folder
and in the server console we got the message saying
that the perticular war file is being deployed .Then
run the cocoon home page using
http://localhost:8080/cocoon-war-2.1.7/ .
Deploying ejb in cocoon
To deployment ejb in cocoon you should have an ejb
container , so we have to integrate ejb with any
application server , here we are using jBoss server.
Here i'm using a js (java script ) file to invoke an
ejb client , i'm using the command
var query = new Packages.hibernate.logging.Query();
where hibernate.logging is the package and Query is
the bean's client , and Packages is the inbuilt
keyword for accessing packages. Then from the client
you can call the bean class as we normally calling the
bean. If you are using data base in the bean you have
to configure the cocoon.xconf file as
<datasources>
<jdbc logger="core.datasources.personnel"
name="personnel">
<pool-controller max="10" min="5"/>
<dburl>jdbc:hsqldb:hsql://localhost:9002</dburl>
<user>sa</user>
<password/>
</jdbc>
<jdbc name ="hibernatedbds">
<pool-controller min = "5" max = "10" />
<dburl>jdbc:postgresql://192.168.0.129:5432/hibernatedb</dburl>
<user>xxxxx</user>
<password/>
</jdbc>
and in the bean calss we can access the database as
public String xxxxxxx(String user, String
password,Session session) throws RemoteException
     try
     if(session == null)
          System.out.println("Session is null");
     Transaction tx = session.beginTransaction();
     org.hibernate.Query q = session.createQuery("from
hibernate.logging.User as user where user.users =
:users and      user.password = :passwords");
     q.setString("users",user);
     q.setString("passwords",password);
     List list = q.list();
     tx.commit();
     if(list.isEmpty())
          return "false";
     catch(Exception e)
          e.printStackTrace();
          System.out.println("Called EJB");
          return "true";
and in the client program we'll give
String value = remote.Validate(user,password,session);
to access the remote method
when the program is ready and compiled create the jar
file and then deploy it to the deploy folder of jboss
and a copy od the same jar file to the
cocoon/WEB-INF/lib/. Then you can run the program .
regards
Peeths

And ? What happens next?
Gosh! That suspense is killing me...

Is there any way to go back to a previous version? this one is not compatable with hardly any of the plugins i had/need.

i need this plug in in order to use features offered by dish network. everytime I go to the site it tells me i need a plug in in order to watch tv/movies online. it goes through the download process and then at the end tells me it couldn't download the plug in because it's not compatible with firefox 5.o. Why when you change something is it so dramatic that simple plug ins can't transfer with it? This version is not compatible with quite a few plug ins i had. if I can't find a way around this i'll have to look for a different browser which is disappointing because I really like firefox and don't like IE which leaves me with Chrome I guess.

First, you could try getting an updated Slingbox plugin from Slingbox: [http://support.slingbox.com/get/KB-5000309.html Sling Media Support - Firefox crashes after upgrading to version 5]. Does that work with Dish?
If that doesn't work, here's the process to roll back to 3.6:
First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, download and save Firefox 3.6 to your desktop for future installation. http://www.mozilla.com/firefox/all-older
Close Firefox 5.
You could install Firefox 3.6 over it (many have reported success) or you could uninstall Firefox first. If you uninstall, do not remove your personal data and settings, just the program.
Unless you have installed an incompatible add-on, Firefox 3.6 should pick up where you left off. If there are serious issues, please post back with details.
Note: I haven't actually tried this myself!

Read this for CD/DVD Drive with burning, missing drives, not seeing discs

Seeing lots of the same posts with the same solutions being applied (mostly upper/lower control filters/MS Fixit)... so I thought I'd put this up for everyone.
*Update* If this helps, please click the kudos to the right as I'm trying to gauge how effective this is. If you have the time to help the community, please reply stating what did or did not work.
There are some helpful HP support articles that you may want to try before posting:
If your drive cannot burn discs... or you can burn CDs but not DVDs (or vise/versa)... read this...
Drive Cannot Write to Writable Discs (Windows 7)
Drive Cannot Write to Writable Discs (Windows Vista)
Drive Cannot Write to Writable Discs (Windows 98, ME, XP)
Summary:
1) Try different discs! Cheap discs can be hit or miss. Find a disc brand and type that works best.
2) Try burning at a slower speed (not the best option, but can often get the job done if the laser is fading).
3) Remove drive from Device Manager and remove upper/lower filters (see below).
4) Use MS System Restore to go back to a time when it was working.
5) Use PC-Doctor/HP Hardware Diagnostic software to check for a bad drive.
6) If the drive is not bad - save your files and use HP Recovery to put the system back to the beginning.
If your drive cannot read discs; CDs or DVDs or both...
Drive Cannot Read Discs in Windows 7
Drive Cannot Read Discs in Windows Vista
Drive Cannot Read Discs in Windows 98, ME, and XP
Summary:
{restart the PC at least once to see if the drive shows up on boot}
1) See if the drive is listed in Device Manager (look for problems if it is).
2) Check autoplay (skip if you don't use).
3) Make sure a bad disc isn't knocking out the drive (an operating system mounts discs as drives and things can get screwed up).
4) Try reading the disc from a command prompt environment (outside of Windows).
5) Reinstall drive from Device Manager (if drive is listed). {I'd replace this with bigger process of remove upper/lower filters (see below)}.
6) Use MS System Restore to go back to a time when it was working.
7) Use PC-Doctor/HP Hardware Diagnostic software to check for a bad drive.
CD/DVD drive is missing (not in Windows Explorer or My Computer or in burning software)...
CD/DVD Drive is not Detected (Windows 7)
CD/DVD Drive is not Detected (Windows Vista)
CD or DVD Drive is not Detected (Windows 98, ME, or XP)
Summary:
1) See if the drive is listed in Device Manager (troubleshoot based on what you see).
2) Reset Power: Unplug power cord, press Power button for 10 seconds.
3) Check power and data cables attached to the drive and look in the BIOS for the drive name.
4) Remove upper/lower filters (see below).
5) Reinstall burning software
6) Get and CD/DVD drive firmware updates if available (to prevent missing drives in the future (I assume)).
7) Use MS System Restore to go back to a time when it was working.
Stuck Drawer...
Opening a Stuck CD or DVD Drive Tray
Summary:
1) Press eject button on case, on drive, button on keyboard (if exists).
2) Right-click drive icon in Windows and select Eject.
3) Turn off PC and inert a straightened paper clip into the manual release hole on the drive.
4) Check the power cord on the back of the drive.
MS FIXit, Resetting Upper and lower Filters (XP, Vista and 7)
First... try to use the MS Fixit (for Vista) if you are on the computer having the problem)...
Microsoft Fix it Solution
Otherwise, here are the manual steps (overview):
1) Uninstall the CD/DVD drive in Device Manager and DO NOT RESTART the computer.
2) Uninstall your CD burning software (make sure you have the installation disc or you can resinstall from Start, Programs, PC Help and Tools, Recovery Manager (or Driver/Application Recovery). If you don't have the installation discs, skip this step - it might still work).
3) Open the registry editor (Start -> Run -> enter Regedit) ... might want to make a backup of the registry at this point.
4) Open the following keys:
+ HKEY_LOCAL_MACHINE
+ SYSTEM
+ CurrentControlSet (or the current control set with lowest number if that is all that is listed)
+ Control
+ Class
5) Select 4D36E965-E325-11CE-BFC1-08002BE10318. It has to be this exact key - make sure you can see the last numbers!!!
6) Delete the UpperFilter and or the LowerFilters value in the right window if either exists.
7) RESTART the computer - this step is important. Wait for Windows to find and install the CD/DVD drive you removed earlier.
8) Reinstall your burning software and restart the computer again.
Message Edited by GarenT on 10-07-2009 06:32 PM
Message Edited by RasterBlaster on 11-30-2009 03:51 PM
... an HP employee expressing his own opinion.
Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

That's why you want to make a backup of the registry. If you didn't make a backup, use MS system restore to go back. The only values you should remove are UpperFilter or LowerFilter - one or both may be in there and can be removed. If neither value exists, then that is probably why you can't burn and Windows is not recognizing your drive as a writable drive.
... an HP employee expressing his own opinion.
Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

MSI GX660R with intel motherboard and compatibility with Samsung 840 EVO SSD

Hi
Im am new to this forum, so I apologize in advance if this post is in the wrong section.
I am considering to replace the hard drive in my MSI GX660R with a Samsung 840 EVO 250 gb ssd, since it has the best benchmark ratings and are very afordable. My laptop has an Intel motherboard with an i7 core processor.
My question in relation to the upgrade is, whether the laptop is compatible with that excact ssd. I plan to run it in AHCI mode, since I have bad expirience with loss of data under RAID. If i chose to run the extra HDD as a secondary drive, it will therefore still be under AHCI.
Can anyone refer me to some sort of compatibility list, or tell me if the above mentioned drive is compatible? I havent been able to find out myself, and MSI is farily difficult to get in contact with.
Any help is appreciated.

Yes, your early 2013 Retina model uses 6.0 Gbps SATA but it's not a standard mSATA connection. You could upgrade using Transcend's JetFlash -> http://www.transcend-info.com/apple/jetdrive/ - to space up to 960GB, however.
Clinton
MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

Droid X2 Owners with Freezes/lockups READ THIS!! and VZ/MOTO employees!!!

I am COMPLETLEY convienced the Freeze/lockup has something to do with the SD card or SD card slot. i retored my phone to 100% stock yesterday, NO bloatware removed etc...ran so nice all day, this morning i decided to put the SD card that came with it back in the phone, formatted it, and BOOM within 15 min, SCreen lock up
MOTO and VZ, you need to look into this. i think that is the issue on the freezes. im going to maybe call and see if i can get a replacement....
**also has happend with a seperate 32 Gig SD card*** SD card slots bad???

Interesting.....if you are running GB, then that's probably your problem. I have had an original DX since Nov 2010 and up until August when they released GB, I had absolutely no problems with the phone. Once GB got installed to the DX, the SD card started having serious issues. The card the phone came with just up and completely corrupted right after GB got installed on the phone, and then the replacement card that I was forced to go buy (VZW refused to replace it but that's an entirely different story) has had problems 3 seperate times since I installed it into the phone since the end of August....seems like every 3-4 weeks the SD card suddenly has file system errors and I cannot read anything on it (computer won't even recognize it), so I end up losing pictures, ringtones and other things to the point that I have regularly back everything up to my computer just to make sure I can keep these pictures and ringtones. They're not all that important pictures, but still....if I was able to go 9 months on Froyo with NO problems with the SD card (or phone for that matter), then how come 2 months since VZW pushed the GB update to the phones are there regular occurences......something is fishy in Denmark with all these sudden problems
I would hope that VZW and Moto would realize the problems increased ten-fold since GB was pushed and actively attempt to fix them once and for all, but I truly believe they view it as the phone being EOL (no NEW phones are sold anymore) that the issues are no longer of a big concern to them. Seems like the only answer is that as we are able to do so, just upgrade to a different phone. I know for a fact that I will NEVER get another Motorola phone.....the DX is a great phone, but Moto, and to an extent VZW, have truly caused the phone to go down the proverbial toilet, which is a shame

Read this : ejb , cocoon and jboss

Integrating cocoon with jBoss
Download cocoon-war-2.1.7.war and then we have to deploy that to the jboss server , to deploy that , we started jboss server in standard mode and then copied the cocoon war file to /usr/local/jboss-4.0.0/server/standard/deploy/ folder and in the server console we got the message saying that the perticular war file is being deployed .Then run the cocoon home page using http://localhost:8080/cocoon-war-2.1.7/ .
Deploying ejb in cocoon
To deployment ejb in cocoon you should have an ejb container , so we have to integrate ejb with any application server , here we are using jBoss server. Here i'm using a js (java script ) file to invoke an ejb client , i'm using the command
var query = new Packages.hibernate.logging.Query();
where hibernate.logging is the package and Query is the bean's client , and Packages is the inbuilt keyword for accessing packages. Then from the client you can call the bean class as we normally calling the bean. If you are using data base in the bean you have to configure the cocoon.xconf file as
<datasources>
<jdbc logger="core.datasources.personnel" name="personnel">
<pool-controller max="10" min="5"/>
<dburl>jdbc:hsqldb:hsql://localhost:9002</dburl>
<user>sa</user>
<password/>
</jdbc>
<jdbc name ="hibernatedbds">
<pool-controller min = "5" max = "10" />
<dburl>jdbc:postgresql://192.168.0.129:5432/hibernatedb</dburl>
<user>xxxxx</user>
<password/>
</jdbc>
and in the bean calss we can access the database as
public String xxxxxxx(String user, String password,Session session) throws RemoteException
     try
     if(session == null)
          System.out.println("Session is null");
     Transaction tx = session.beginTransaction();
     org.hibernate.Query q = session.createQuery("from      hibernate.logging.User as user where user.users = :users and      user.password = :passwords");
     q.setString("users",user);
     q.setString("passwords",password);
     List list = q.list();
     tx.commit();
     if(list.isEmpty())
          return "false";
     catch(Exception e)
          e.printStackTrace();
          System.out.println("Called EJB");
          return "true";
and in the client program we'll give
String value = remote.Validate(user,password,session);
to access the remote method
when the program is ready and compiled create the jar file and then deploy it to the deploy folder of jboss and a copy od the same jar file to the cocoon/WEB-INF/lib/. Then you can run the program .

And ? What happens next?
Gosh! That suspense is killing me...

Kernal Panic Could you guys read this error messages and explain to me pls?

Interval Since Last Panic Report: -15 sec
Panics Since Last Report: 1
Anonymous UUID: C9D85673-BDE7-4851-9C75-89207D85BCF5
Sun Oct 24 20:39:29 2010
panic(cpu 2 caller 0x2a7c84): Double fault at 0x00257604, thread:0xdff7b7c, trapno:0x8, err:0x0,registers:
CR0: 0x80010033, CR2: 0x5c7d7f88, CR3: 0x00100000, CR4: 0x00000660
EAX: 0x71465000, EBX: 0x0000000e, ECX: 0x02f52ebc, EDX: 0x00000000
ESP: 0x5c7d7f90, EBP: 0x5c7d80c8, ESI: 0x00000001, EDI: 0x5c7d81c0
EFL: 0x00010206, EIP: 0x00257604
Backtrace (CPU 2), Frame : Return Address (4 potential args on stack)
0x55095fb8 : 0x21b455 (0x5cf328 0x55095fec 0x2238b1 0x0)
0x55096008 : 0x2a7c84 (0x591330 0x59142b 0x257604 0xdff7b7c)
0x550960f8 : 0x29f8f2 (0x0 0xd089e04d 0x2b74c809 0xe8c1c889)
0x5c7d80c8 : 0x2a880f (0x2f52ebc 0x71465000 0x0 0x1)
0x5c7d81a8 : 0x29e9a8 (0x5c7d81c0 0x0 0x5c7d8b38 0x121b864)
0x5c7d81b8 : 0x121b864 (0xe 0x9b30048 0x5c7d0010 0x4f0010)
0x5c7d8b38 : 0x11fa14c (0x462be000 0xec26700 0x0 0x0)
0x5c7d8b78 : 0x11fa4b8 (0x462be000 0xec26700 0x46 0x226d39)
0x5c7d8bb8 : 0x156c6df (0x462be000 0x91c1980 0x4 0x0)
0x5c7d8be8 : 0x4fbdbe (0x91c1980 0x0 0x1 0xf129600)
0x5c7d8c08 : 0x4fbdd9 (0x91c1980 0x0 0x5c7d8c38 0x52acb5)
0x5c7d8c28 : 0x156ca48 (0x91c1980 0xb0 0x1 0x5502d000)
0x5c7d8c58 : 0x121092d (0x91c1980 0xec26900 0xb0 0xec73f00)
0x5c7d8c98 : 0x11fb663 (0x462be000 0xeb35900 0x69732072 0x223d657a)
0x5c7d8cd8 : 0x11fb9e0 (0x462be000 0x0 0x2f3c3e2f 0x74636964)
0x5c7d8d38 : 0x11fbe44 (0x462be000 0x0 0x0 0x0)
0x5c7d8d78 : 0x11fa0ec (0x462be000 0x0 0x0 0x0)
0x5c7d8db8 : 0x11fa4b8 (0x462be000 0xeb35a00 0x3c3e2f22 0x3e79656b)
0x5c7d8df8 : 0x156c6df (0x462be000 0xf11ac40 0x4 0x0)
0x5c7d8e28 : 0x4fbdbe (0xf11ac40 0x0 0x1 0xf120600)
0x5c7d8e48 : 0x4fbdd9 (0xf11ac40 0x0 0x65746e69 0x3e726567)
0x5c7d8e68 : 0x156ca48 (0xf11ac40 0x52444920 0x223d4645 0x22373535)
0x5c7d8e98 : 0x121092d (0xf11ac40 0x66666666 0x63666666 0x36343830)
0x5c7d8ed8 : 0x11fb663 (0x462be000 0xec6f000 0x693c3e79 0x6765746e)
0x5c7d8f18 : 0x11fb9e0 (0x462be000 0x0 0x692f3c31 0x6765746e)
0x5c7d8f78 : 0x11fbe44 (0x462be000 0x0 0x0 0x0)
0x5c7d8fb8 : 0x11fa0ec (0x462be000 0x0 0x0 0x0)
0x5c7d8ff8 : 0x11fa4b8 (0x462be000 0xebdc700 0x52444920 0x223d4645)
0x5c7d9038 : 0x156c6df (0x462be000 0xf12b740 0x4 0x0)
0x5c7d9068 : 0x4fbdbe (0xf12b740 0x0 0x1 0xee2c200)
0x5c7d9088 : 0x4fbdd9 (0xf12b740 0x0 0x79656b3c 0x2f3c373e)
0x5c7d90a8 : 0x156ca48 (0xf12b740 0x303e2234 0x37303478 0x35353535)
Backtrace continues...
Kernel Extensions in backtrace (with dependencies):
com.apple.iokit.IOSurface(74.0)@0x1568000->0x1572fff
com.apple.driver.AppleIntelHDGraphics(6.1.8)@0x11f8000->0x12a4fff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x926000
dependency: com.apple.iokit.IONDRVSupport(2.1)@0x959000
dependency: com.apple.iokit.IOGraphicsFamily(2.1)@0x937000
BSD process name corresponding to current thread: WebKitPluginHost
Mac OS version:
10F569
Kernel version:
Darwin Kernel Version 10.4.0: Fri Apr 23 18:28:53 PDT 2010; root:xnu-1504.7.4~1/RELEASE_I386
System model name: MacBookPro6,1 (Mac-F22589C8)
System uptime in nanoseconds: 5913215493818
unloaded kexts:
com.apple.driver.AppleFileSystemDriver 2.0 (addr 0xffd000, size 0x12288) - last unloaded 91404022801
loaded kexts:
com.apple.driver.AppleHWSensor 1.9.3d0 - last loaded 25880438044
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AGPM 100.12.12
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AppleHDA 1.8.7f1
com.apple.driver.AppleMikeyDriver 1.8.7f1
com.apple.driver.AudioAUUC 1.4
com.apple.driver.AppleUpstreamUserClient 3.3.2
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.kext.AppleSMCLMU 1.5.0d3
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.driver.AudioIPCDriver 1.1.2
com.apple.driver.ACPISMCPlatformPlugin 4.1.2b1
com.apple.driver.AppleLPC 1.4.12
com.apple.GeForce 6.1.8
com.apple.driver.AppleGraphicsControl 2.8.63
com.apple.driver.AppleIntelHDGraphics 6.1.8
com.apple.driver.AppleIntelHDGraphicsFB 6.1.8
com.apple.driver.AppleUSBTCButtons 1.8.1b1
com.apple.driver.AppleUSBTCKeyboard 1.8.1b1
com.apple.driver.AppleIRController 303.8
com.apple.iokit.SCSITaskUserClient 2.6.5
com.apple.iokit.IOAHCIBlockStorage 1.6.2
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleUSBHub 4.0.0
com.apple.driver.AppleFWOHCI 4.7.1
com.apple.iokit.AppleBCM5701Ethernet 2.3.8b2
com.apple.driver.AirPortBrcm43224 425.16.2
com.apple.driver.AppleAHCIPort 2.1.2
com.apple.driver.AppleEFINVRAM 1.3.0
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleUSBEHCI 4.0.2
com.apple.driver.AppleUSBUHCI 4.0.2
com.apple.driver.AppleACPIButtons 1.3.2
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSMBIOS 1.6
com.apple.driver.AppleACPIEC 1.3.2
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 105.10.0
com.apple.security.sandbox 0
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 105.10.0
com.apple.driver.DspFuncLib 1.8.7f1
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.driver.AppleSMBusController 1.0.8d0
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IOSurface 74.0
com.apple.iokit.IOBluetoothSerialManager 2.3.7f1
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.driver.AppleHDAController 1.8.7f1
com.apple.iokit.IOHDAFamily 1.8.7f1
com.apple.iokit.IOAudioFamily 1.7.6fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleSMC 3.0.1d2
com.apple.driver.IOPlatformPluginFamily 4.1.2b1
com.apple.driver.AppleSMBusPCI 1.0.8d0
com.apple.nvidia.nv50hal 6.1.8
com.apple.NVDAResman 6.1.8
com.apple.iokit.IONDRVSupport 2.1
com.apple.iokit.IOGraphicsFamily 2.1
com.apple.driver.BroadcomUSBBluetoothHCIController 2.3.7f1
com.apple.driver.AppleUSBBluetoothHCIController 2.3.7f1
com.apple.iokit.IOBluetoothFamily 2.3.7f1
com.apple.driver.AppleUSBMultitouch 205.32
com.apple.iokit.IOUSBHIDDriver 4.0.2
com.apple.driver.AppleUSBMergeNub 4.0.0
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.5
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.4
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.5
com.apple.iokit.IOUSBUserClient 4.0.0
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IO80211Family 311.1
com.apple.iokit.IONetworkingFamily 1.9
com.apple.iokit.IOAHCIFamily 2.0.4
com.apple.iokit.IOUSBFamily 4.0.2
com.apple.driver.AppleEFIRuntime 1.3.0
com.apple.iokit.IOHIDFamily 1.6.5
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 283
com.apple.iokit.IOStorageFamily 1.6.1
com.apple.driver.AppleACPIPlatform 1.3.2
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacBookPro6,1, BootROM MBP61.0057.B0A, 2 processors, Intel Core i7, 2.66 GHz, 4 GB, SMC 1.57f17
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.16.1)
Bluetooth: Version 2.3.7f1, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: TOSHIBA MK5055GSXF, 465.76 GB
Serial ATA Device: HL-DT-ST DVDRW GS23N
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0xfd110000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0237, 0xfa120000
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0xfa113000
I sent my macbook to the apple store because of the Kernal panic and got it back yesterday
and today I had kernal panic TWICE again.
Please, I would like to know what is wrong with my macbook
Could you guys tell me what is wrong?
Thanks

JihyunYun93 wrote:
Interval Since Last Panic Report: -15 sec
Panics Since Last Report: 1
... Could you guys tell me what is wrong?
I am no expert, but I did not see anything that I recognize as "the problem." In cases like this, diagnosing kernel panics is a step-by-step process. Start by disconnecting all peripherals and restart the Mac to see if the problem goes away. If the problem remains, continue with the next suggestion and repeat until you find the problem. Then you will know what to fix.
Start here for help resolving your kernel panic: http://www.thexlab.com/faqs/kernelpanics.html
Another KP help site: http://www.index-site.com/kernelpanic.html
Apple's 10.6 help article: http://docs.info.apple.com/article.html?path=Mac/10.6/en/8965.html
Apple's KP knowledge base article: http://support.apple.com/kb/HT1392
In-depth KP info: http://developer.apple.com/mac/library/technotes/tn2002/tn2063.html
Message was edited by: EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.4); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.4)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod touch 4.1

Can someone read this crash log and tell me whats wrong please

Anonymous UUID:       7F4336E4-C6DA-0238-7240-8EEE20983BFD
Thu Aug 7 16:08:47 2014
panic(cpu 1 caller 0xffffff80082dc24e): Kernel trap at 0xffffff7f8a16f9f1, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffef811ed3bf00, CR3: 0x000000000af8f000, CR4: 0x0000000000000660
RAX: 0xffffff801a37e000, RBX: 0x0000000000000000, RCX: 0xffffff801a37e000, RDX: 0xfffffffffffffffe
RSP: 0xffffff811ed3be80, RBP: 0xffffef811ed3bf30, RSI: 0x000000000001e558, RDI: 0x0000000000000000
R8: 0x00000000e0000000, R9: 0x0000000000000005, R10: 0x0000000000000920, R11: 0xffffffffffffffff
R12: 0x0000098becc6e2c0, R13: 0xffffff8103ea5148, R14: 0x0000000000000000, R15: 0x000000000001e558
RFL: 0x0000000000010097, RIP: 0xffffff7f8a16f9f1, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffef811ed3bf00, Error code: 0x0000000000000000, Fault CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff811ed3bb10 : 0xffffff8008222f79
0xffffff811ed3bb90 : 0xffffff80082dc24e
0xffffff811ed3bd60 : 0xffffff80082f3746
0xffffff811ed3bd80 : 0xffffff7f8a16f9f1
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xffffef811ed3bf30
      Kernel Extensions in backtrace:
         com.apple.driver.AppleIntelCPUPowerManagement(217.92.1)[CF28958D-CA8A-3A79-911C -78217F5DDAF2]@0xffffff7f8a16d000->0xffffff7f8a197fff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13E28
Kernel version:
Darwin Kernel Version 13.3.0: Tue Jun 3 21:27:35 PDT 2014; root:xnu-2422.110.17~1/RELEASE_X86_64
Kernel UUID: BBFADD17-672B-35A2-9B7F-E4B12213E4B8
Kernel slide:     0x0000000008000000
Kernel text base: 0xffffff8008200000
System model name: MacBook5,1 (Mac-F42D89C8)
System uptime in nanoseconds: 10496577769475
last loaded kext at 10313995154133: com.apple.driver.AppleIntelMCEReporter 104 (addr 0xffffff7f8a5ad000, size 49152)
last unloaded kext at 10380528075061: com.apple.driver.AppleIntelMCEReporter 104 (addr 0xffffff7f8a5ad000, size 32768)
loaded kexts:
com.apple.filesystems.smbfs 2.0.2
com.apple.driver.AudioAUUC 1.60
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleBluetoothMultitouch 80.14
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.iokit.IOBluetoothSerialManager 4.2.6f1
com.apple.driver.AGPM 100.14.28
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 2.6.3f4
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.GeForceTesla 8.2.4
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.6f1
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleMikeyDriver 2.6.3f4
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleBacklight 170.3.5
com.apple.driver.AppleMCCSControl 1.2.5
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.6
com.apple.driver.XsanFilter 4
Model: MacBook5,1, BootROM MB51.007D.B03, 2 processors, Intel Core 2 Duo, 2.4 GHz, 8 GB, SMC 1.32f8
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x01BA, 0x202020202020202020202020202020202020
Memory Module: BANK 0/DIMM1, 4 GB, DDR3, 1333 MHz, 0x01BA, 0x202020202020202020202020202020202020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.6f1 14216, 3 services, 23 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: TOSHIBA MK2553GSX, 250.06 GB
Serial ATA Device: HL-DT-ST DVDRW GS21N
USB Device: Built-in iSight
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
USB Device: IR Receiver
Thunderbolt Bus:

You, or someone, has installed the incorrect spec ram. Your MacBook 5,1 requires
RAM Type:
PC3-8500 DDR3
Min. RAM Speed:
1066 MHz
You should replace it with the correct ram. I'd recommend ram from either OWC http://eshop.macsales.com or Crucial http://www.crucial.com

Can someone please read this crash log and tell me what to do?

Anonymous UUID:       7F4336E4-C6DA-0238-7240-8EEE20983BFD
Thu Aug 7 16:08:47 2014
panic(cpu 1 caller 0xffffff80082dc24e): Kernel trap at 0xffffff7f8a16f9f1, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffef811ed3bf00, CR3: 0x000000000af8f000, CR4: 0x0000000000000660
RAX: 0xffffff801a37e000, RBX: 0x0000000000000000, RCX: 0xffffff801a37e000, RDX: 0xfffffffffffffffe
RSP: 0xffffff811ed3be80, RBP: 0xffffef811ed3bf30, RSI: 0x000000000001e558, RDI: 0x0000000000000000
R8: 0x00000000e0000000, R9: 0x0000000000000005, R10: 0x0000000000000920, R11: 0xffffffffffffffff
R12: 0x0000098becc6e2c0, R13: 0xffffff8103ea5148, R14: 0x0000000000000000, R15: 0x000000000001e558
RFL: 0x0000000000010097, RIP: 0xffffff7f8a16f9f1, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffef811ed3bf00, Error code: 0x0000000000000000, Fault CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff811ed3bb10 : 0xffffff8008222f79
0xffffff811ed3bb90 : 0xffffff80082dc24e
0xffffff811ed3bd60 : 0xffffff80082f3746
0xffffff811ed3bd80 : 0xffffff7f8a16f9f1
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xffffef811ed3bf30
      Kernel Extensions in backtrace:
         com.apple.driver.AppleIntelCPUPowerManagement(217.92.1)[CF28958D-CA8A-3A79-911C -78217F5DDAF2]@0xffffff7f8a16d000->0xffffff7f8a197fff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13E28
Kernel version:
Darwin Kernel Version 13.3.0: Tue Jun 3 21:27:35 PDT 2014; root:xnu-2422.110.17~1/RELEASE_X86_64
Kernel UUID: BBFADD17-672B-35A2-9B7F-E4B12213E4B8
Kernel slide:     0x0000000008000000
Kernel text base: 0xffffff8008200000
System model name: MacBook5,1 (Mac-F42D89C8)
System uptime in nanoseconds: 10496577769475
last loaded kext at 10313995154133: com.apple.driver.AppleIntelMCEReporter 104 (addr 0xffffff7f8a5ad000, size 49152)
last unloaded kext at 10380528075061: com.apple.driver.AppleIntelMCEReporter 104 (addr 0xffffff7f8a5ad000, size 32768)
loaded kexts:
com.apple.filesystems.smbfs 2.0.2
com.apple.driver.AudioAUUC 1.60
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleBluetoothMultitouch 80.14
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.iokit.IOBluetoothSerialManager 4.2.6f1
com.apple.driver.AGPM 100.14.28
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 2.6.3f4
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.GeForceTesla 8.2.4
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.6f1
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleMikeyDriver 2.6.3f4
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleBacklight 170.3.5
com.apple.driver.AppleMCCSControl 1.2.5
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.6
com.apple.driver.XsanFilter 4
Model: MacBook5,1, BootROM MB51.007D.B03, 2 processors, Intel Core 2 Duo, 2.4 GHz, 8 GB, SMC 1.32f8
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x01BA, 0x202020202020202020202020202020202020
Memory Module: BANK 0/DIMM1, 4 GB, DDR3, 1333 MHz, 0x01BA, 0x202020202020202020202020202020202020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.6f1 14216, 3 services, 23 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: TOSHIBA MK2553GSX, 250.06 GB
Serial ATA Device: HL-DT-ST DVDRW GS21N
USB Device: Built-in iSight
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
USB Device: IR Receiver
Thunderbolt Bus:

You, or someone, has installed the incorrect spec ram. Your MacBook 5,1 requires
RAM Type:
PC3-8500 DDR3
Min. RAM Speed:
1066 MHz
You should replace it with the correct ram. I'd recommend ram from either OWC http://eshop.macsales.com or Crucial http://www.crucial.com

MSI afterburner causing driver crashing and artifacting with no overclock.

I almost RMA'd my 2 980's due to the artifacting and driver crashing I was getting. then I remembered that I had just installed MSI afterburner ONLY for the fan profile.
I uninstalled MSI afterburner and the problems went away.
Specs: win 8.1 x 64
2x 980's in sli.
Asus maximums VII hero
i7 4770k.
8 gb ddr3 2133 ram.
This happened on my brothers system as well, i7 2600k
win 8.1 x 64
It might just be a win 8.1 or 8.1 x 64 compatibility issue?
Idk, what I do know is I won't be using this product for a while, if at all anymore..

Hi
I suggest you open a thread here:
http://forums.guru3d.com/forumdisplay.php?f=55
As Guru3D dedicated one spot for Afterburner bugs/issues and that;s where it's best to ask if you have issues with MSI AB.

HEY MSI. READ THIS (regarding ICH5R and compatibility with WD Raptors)

Similar Messages

Maybe you are looking for