Hey, my sound suddenly stopped working! Please help me :)

Hey guys, suddendly my sound stopped working this morning why is that? I really need to fix this soon, so if you have any ideas it would really be usefull. Thanks

Don't restore just yet - your music might still be there. There are several threads addressing this in the iTunes board under Discussions. I'll look around and see if I can find something for you on how to access your ipos as a hard drive - which will allow you to see if the songs are there. IF THEY ARE you can do the following:
http://discussions.apple.com/thread.jspa?threadID=658258&tstart=0
Back in a bit if I can find the thread explaining the above-mentioned process (unless someone else beats me to it).

Similar Messages

  • Internet sharing suddenly stopped working - please help!

    I have been sharing my internet for weeks from my computer but this morning it suddenly stopped working. I've tried changing the password, changing the channel number, and changing the Network name to a simple one, but it is all not working Apparently the authentication server is not responding? How can I fix that?

    I'm having the same problem. I had internet sharing set up on my iMac from Ethernet via AirPort, and received quite well on my MacBook and iPod Touch, and then one day, it just stopped working. I'm assuming that some update or other caused this problem, but I have no idea which (I mostly use the internet on my desktop machine, so it may have been several days before I noticed the problem). I've tried with-and-without a password, and also tried sharing from my MacBook to the iMac and iPod Touch, and I can't get any bandwidth (I can connect to the 802.11 network that I create, but I can't get any internet through it).

  • WRT150N router has suddenly stopped working - please help :)

    I really don' know much about how routers work, so I am hoping you all can help me.  I have a home PC and an HP notebook.  We have a cable modem and a linksys wrt150N wireless router in order to use the laptop around the house.  It was working fine up until 2 days ago, when it suddenly just stopped working.  Nothing has changed.  I've tried unplugging, rebooting, resetting the little button on the back of the router.  I've tried clearing and refreshing the IP address.  The wireless and the security lights aren't lit up anymore.  I have tried to repair but I get the errors can't acquire a network address, and can't renew the IP address.  I've tried reinstalling the cd that came with the router.  I get router not found.  Please make sure the router is properly connected.  I don't know what to do anymore.  I can't get to the router set up because I can't use the internet without bypassing the router and connecting directly from modem to computer.  Is there any way I can fix this or is this router toast?  We've only had it for 2 years.  I am running XP on the PC, and Vista on the laptop.
    If anyone has any idea what is wrong, please please let me know.  I have school work to do on the laptop and really need my wireless connection back.
    Thanks so much.

    If you are unable to configure your router using the setup disk, then you can configure all the settings on your router manually.
    Click here to configure your router for cable isp.

  • Brand new ipod touch suddenly stopped working. please help!

    I was messing around on my brand new ipod touch and it suddenly crashed. it flashed a static-y black and now the screen is bluish white and won't change. I tried holding both the home button and the black button on top of the ipod and neither helped. I even connected it back to my mac book but nothing happened. please help! i've only had it for two days!

    That sounds like a mechanical problem.  You might want to insert and remove the headphone plug several times and see if it fixed the issue.  If it does not, call Apple.  800-275-2273 in the U.S.A. and I think Canada.

  • My WRT54G suddenly stopped working please help.

    Hi, i recently configured the security of the router, and then when i pressed the auto connect on the router it can no longer send a wireless signal... i tried to press the RESET button on the back, it should return it to the factory setting right? but when i connected it it wont give me good ip addresses it says limited or no connectivity, even if i manual set the ip. then try to access the home page it would not work.
    i have some ideas how to fix this but i dont know if it is possible or not. :
    1.) reset the router from a computer without accessing the page.
    2.) go to a service center (if there is an available in the philippines...)
    3.) overriding the firmware without accessing the page
    please help, or else i would need to spend another 40-50$ for a new router T_T
    i also tried to download the easylink firmware, or the easlink connect
    but i get a 550 error when accessing the page, the online chat is no help either, they say i am on first queue but no one is answering :/
    ver: WRT54G ver7
    Message Edited by Shinigami_V on 04-23-2009 07:19 PM

    Hard reset your router for a minute...
    Press and hold the reset button for 1 minute...Release the reset button...Unplug the power cable from your router, wait for 1 minute and re-connect the power cable...Also make sure that your computer is set to obtain IP automatically, disable any firewalls, security softwares on the computer before trying to access the setup page...Now check if you can access your router set-up...
    Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1...
    If you get the above mentioned ip address and gateway then you should be able to re-configure your router...If you get an IP Address of 169.254, then reset the router again...If still you don't get the above mentione ip address and gateway then  you should give a static ip address on the computer...
    Click on the Start button >>> Settings >>> Control Panel >>>Network Connections- Right click on the icon for Local area connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the following IP address'- Provide IP Address - 192.168.1.5, Subnet Mask - 255.255.255.0, Default Gateway - 192.168.1.1...Click on Ok button to Save and Click on "Close" on main Properties window...Now try to ping the Default Gateway, type ping 192.168.1.1 and press enter, see if you get 4 replies...If it does not then try to diable and security softwares/firewalls on your computer and try to ping it again, you should get 4 replies...
    If you get the set-up page then you can configure your router...
    If your Internet Service Providor is Cable follow this link
    If your Internet Service Providor is DSL follow this link

  • Ipod apps suddenly stop working, please help very fustrating!

    I got a new Ipod Touch and sometimes the apps I've downloaded work fine but then some of the apps, after I tap on them, will load for a few seconds and show the splash screen but then will stop working and I'll end up back on the home page, and I have to re-install them from the app store so they will work again, Why does this happen? thx!
    (Ipod 2g) (latest firmware)

    There is a thread I think similar to this
    http://discussions.apple.com/thread.jspa?threadID=1735940&tstart=30
    I had something similar happen. I ended up deleting the app and then downloading them from my computer. I have also heard that if you restart your ipod before running the app for the first time that may work. Apple though is aware of the issue.

  • My sound suddenly stopped working, how do i fix this?

    my sound suddenly stopped working after i unplugged my headphones, how do i fix this?

    Common problem.
    Check the headphone port - if you can see a red light, the port is still live, cutting off the internal speakers.
    The cause is a little leaf switch that is pushed over by the jack when you insert it. Sometimes these stick.
    Try inserting and removing a jack a few (dozen) times.
    If that doesn't free it you may attempt to tease it with a slim non-conducting tool (like a toothpick). Ensure the Mac is not only shut down, but unplugged if you try this.
    And be careful; the leaf is fragile and it's an expensive bit to get to and replace, in fact on some models it's directly on the logic board.

  • Sound suddenly stopped working.

    Hi, my sound on my HP ENVY 15 Notebook PC just suddenly stopped working the other day. Everything says that it is functioning, and my drivers are up to date, but I cannot seem to get the sound to work out of my speakers or out of headphones. 
    Product Number: A9P60UA#ABA
    Running Windows 7 Home Premium 64-bit
    If you could help, that would be wonderful! Thanks!

    Hi,
    Try the following.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp56501-57000/sp56900.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete,download and reinstall the Chipset driver on the link below.
    Chipset Driver - Windows 7.
    When this has completed, shut down the notebook, unplug the AC Adapter and then hold down the Power and Beats buttons for 10 seconds.  When done, reconnect the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Let Windows fully load - it will automatically load an audio driver, but just let this complete.  Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Sound suddenly stops working (Youtube)

    Hi!
    Since I installed a Flash Player update 1-2 months ago, the sound in almost half of the videos I watch on Youtube suddenly stops working (usually only in videos that are longer than 10 minutes). First there's a short crackling sound (not all the time, though) and then the sound simply stops, even though the video is still playing. Reloading the page or jumping ahead a few minutes, then going back to the original spot usually only fixes it for less than 5 minutes and if I do that 2 or 3 times, the sound won't even be there for more than a few seconds. Restarting Firefox doesn't help, either. If I want to try again with the same video a few days later, the problem occurs again.
    I'm using headphones (Sennheiser HD 201) that are plugged into speakers (Logitech X-140) but I'm 100% sure that those aren't the culprits since I can listen to mp3s, watch videos (avi, mp4, doesn't matter) or play games just fine and the problem has never ever occured while doing that. So it definately has something to do with the update 1-2 months ago and the latest update (maybe a week ago) didn't fix it. I also already saw a few comments on videos I'm experiencing the problem with about the sound suddenly stopping.
    OS: Windows 7 (64 bit)
    Browser: Firefox (36.0.4) - also tried loading the video in IE11 but all the buttons (quaility settings,...) were missing, so I closed it again.
    Flash Player: 17.0.0.134
    Any idea how I can fix the problem and if there's already a fix in the works?

    Most of the videos on YouTube these days are HTML5.  If you right-click on the problem video, are you getting About Flash Player, or About HTML5?
    If it *is* Flash, do you have the same problem if you disable Hardware Acceleration?  See the section on it in the troubleshooting guide below:
    Video playback issues

  • New mail sound suddenly stopped working

    I assigned a 'new mail sound' (wav file) and for no apparent reason suddenly stopped working. Anyone else experienced this ?

    This sometimes happens to me too, as well as my alerts with iChat. I have to restart the computer and that fixes it for me. Hope that is the case with you as well.
    Christine

  • Sounds suddenly stop working

    Certain sounds on my iPhone (text alerts, text sent sound, etc) will suddenly stop working.  I will get notification of an incoming text with a sound all day long and then out of the blue there will be no sound to accompany the alerts anymore.  When I send a text, I always hear a sound when it sends the text...but just like the alerts, the sound for that will suddenly quit too.
    Yes, I've checked the loud/silent switch.  I've checked the volume.  The only thing that seems to fix this issue is powering off and back on.
    I don't use headphones (I've seen this can sometimes cause the silent mode to get stuck) so that isn't the problem.  I thought maybe it had something to do with the bluetooth connection in my car but the sound will quit sometimes when the bluetooth is off and I'm nowhere near my car.
    I had this issue with my iPhone 4s and just put up with it until I got the new iPhone 6, figuring I wouldn't have the issue anymore with a new phone.  My iPhone 6 is still doing this so I'm guessing there is some crazy, hidden setting somewhere I'm not aware of, or there is something wonky in the iOS.
    This is incredibly frustrating as I have not known about an urgent message because the phone didn't make any alert sound to let me know I received a message.

    Was wondering if you had found a solution for this?  I went to the Genius Bar 3 seperate times to get this exact issue resolved.  First they reset my phone as a new phone, then they replaced my speaker, and finally they replaced my phone.  Still, with a brand new phone, it is happening.  I have iphones for a long time and do not believe I am doing anything differently.  Have you found something that worked for you?  Thanks!

  • Adobe Photoshop CS5 extended. The liquify filter has suddenly stopped working. Help!

    My liquify filter has suddenly stopped working. Any ideas?

    When I open liquify, it opens as usual and I can adjust the size of the image, choose the tool and attempt to edit the image , but it does not respond.  Nothing happens.

  • Java in suddenly stopped working. Help?

    Java in suddenly stopped working. Get "inactive plugin". Things were fine yesterday. Checked Java preference and everthing looks fine. Running os 10.6.8. Does anyone have a fix?

    The recently released Java 7 Update 11 has been blocked by Apple through its XProtect anti-malware feature in OS X.
    Oracle issued the latest update to Java earlier this month to fix a serious zero-day security flaw. The threat was so serious that the U.S. Department of Homeland Security had recommended that all Java 7 users disable or uninstall the software until a patch was issued.
    Apple took action on its own and quietly disabled the plugin through its OS X anti-malware system. And as noted by MacGeneration on Thursday, Apple has again updated its OS X XProtect list, this time to block Java 7 Update 11.
    Because Oracle has yet to issue a newer version of Java that addresses any outstanding issues, Mac users are prevented from running Java on their system.
    Over the last few years, Apple has moved to gradually remove Java from OS X. The Mac maker dropped the Java runtime from the default installation for OS X 10.7 Lion when the operating system update launched in 2010. Java vulnerabilities have been a common exploit used by malicious hackers looking to exploit the OS X platform.
    Most notably, the "Flashback" trojan that spread last year was said to have infected as many as 600,000 Macs worldwide at its peak. Apple addressed the issue by releasing a removal tool specifically tailored for the malware, and also disabled the Java runtime in its Safari web browser starting with version 5.1.7.
    Javascript should not be disabled (it has nothing to do with Java).

  • My iPhone sound suddenly stopped working.

    I have had my iPhone 4s for over a year with no problems other than the occasional slow down, etc. Just last night, the sound on my phone randomly stopped working. It will work for a few seconds then stop, and just keep doing it. Its my ringtone, text tone, keypad tone, music, and video apps. I've tried turning the phone on and off with no luck. I just want to know why my phone has suddenly started doing this when it was just working fine and how to fix it. Please help?

    None of these methods worked, so I just took a very thin paintbrush and dampened it using a Clorox wipe. Then, I just wiggled it around in the charging port. The sound worked for like 3 seconds then it stopped again. So I continued to clean it and it worked! After I listened to my music for about 30 minutes until it stopped again. I just blew hard into the port and it started working again. I think the problem was that the phone thought it was docked into speakers because it was so dirty. I think I'm going to get an Otterbox so this doesn't happen again. I hope I helped.

  • My Refine Edge in Photoshop CS6 has STOPPED WORKING, please help!

    Photoshop CS6
    Windows 8.1
    I have been using refine edge with no problem for months.
    everything worked great!
    I was able to extract out hair and edges very, very, very well...
    but about 2 weeks ago...something changed... the refine edge brush no longer works.
    When I click on Refine Edge... instead of a brush icon, I get the CIRCLE with a SLASH and my system keeps dinging because the tool is just not available.
    I deleted my preferences...but it is still a problem
    NOW... when I adjust the sliders, i don't see a preview of the adjustments...
    Please help!!!!

    no difference.
    i have tried to check and uncheck everything...
    if i adjust the sliders, i get NO Preview... but when i click OK, the resulting photo has been completely ruined by the tool...
    I tried deleting preferences...no change
    the weird thing is that this problem was very sudden.  Just a few weeks ago, I was using refine edge with NO PROBLEM. it is my GO TO tool for extracting people out of pictures...
    but then one day, it just stopped working...
    Do i need to reinstall CS6???

Maybe you are looking for