Hey - NM network reports again in my Inbox

After several months of outage suddenly out of the blue I received two NM network reports both for "Sunday, June 28th". I am used to the fact that day of the week and day of the month does not match, also the report was empty because the PC was not turned on on Sunday, but this might indicate that NM network reports are back.
Any similar experiences from other forum members?

After few days of empty reports (in spite of the fact that PC was turned on and used) last two reports are normal again. All network activity and applications used are presented as they should be.
Nice Cisco, try to keep it that way .
So currently for me there exists just one minor problem related to the NM - day of the month and day of the week in the report do not match e.g. today Sunday, July 4th, I received report for Friday, July 3rd.

Similar Messages

Summary Network Report Generation Error

I am running SBS 2011 and have recently stopped getting the Network Summary Reports. When I go into the log I see the following error:
2014-05-12T03:15:00.245868 : ***************** Starting GenerateMonitoringReport task... *****************
2014-05-12T03:15:00.246868 : Generating Summary Network Report...
System.NullReferenceException: Object reference not set to an instance of an object.
   at Microsoft.WindowsServerSolutions.SystemHealth.Monitoring.FirewallInformation.GetFirewallStatusFromMonitoringStore(String computerName)
   at Microsoft.WindowsServerSolutions.SystemHealth.Monitoring.ReportGenerator.GenerateSecuritySectionSecurityCenterPart(ReportSection section)
   at Microsoft.WindowsServerSolutions.SystemHealth.Monitoring.ReportGenerator.GenerateSecuritySection()
   at Microsoft.WindowsServerSolutions.SystemHealth.Monitoring.ReportGenerator.GenerateReport(ReportConfiguration config)
   at Microsoft.WindowsServerSolutions.SystemHealth.Monitoring.GenerateReportTask.Run()
   at Microsoft.WindowsServerSolutions.SystemHealth.Monitoring.SBSTask.StartTheTaskStub()
This error happens every time the report is generated. Any help resolving this would be much appreciated.

Hi Rory Christian,
Would you please let me confirm whether it’s SBS 2011 Essentials or SBS 2011 Standard?
If it’s SBS 2011 Essentials, and you have installed Update Rollup 2. Please use following Hotfix and check
if help you to solve this issue.
You receive the warning "Computer Monitoring Error"
in Windows Small Business Server 2011 Essentials after you install Update Rollup 2
If this issue still persists or it’s SBS 2011 Standard, please run
SBS BPA and fix all that it can find. Then monitor the result. Meanwhile, please open Event Viewer and check if you can find more clues.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

BEx web report selection screen entries retain when closing and opening the report again

Hello all,
please help me in the below query.
Till last month the entries we made in BEx web report selection screen are retained in the selection screen even when we close the web report and open it again from portal without logging off. But recently this functionality is missing and the entries in selection screen are not remembered when we close and open the same report again. It is a good feature for the users. Have you come across this issue?

No...I think i can reframe the question very clearly......For ex: we are opening a Bex Web report...so initally we would be prompted by the variable selection screen...in which we have to give the entries(Values) for those variables like Cal month, Sales org, Company code, etc.....Later on the report will get open based on the values we have given......
Now if we close the particular report without logging off then if i try to open the same report that selected values are missing.....earlier it used to remember the values we have given until we log off....But now that functionality is missing....It was very useful feature.....Can you please tel me what can be done to resolve this??
I hope the explanation would be clear now.

Network Report Changed

Hi All,
Cisco changed the way that Network Reports are done. No longer is the actual report Emailed. No Longer can you checked previous Email Reports. You can only check the current information.
If you like Network Magic and are unhappy about the current Network Reports, you need to speak up and call Customer Service and / or post your feelings here. Or you can just accept the changes.
I have no children, and really don't need Network Reports. But if you have children and want to check older Reports, you need to speak out and not remain silent.
thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

A few thoughts :
- I like the format of the new reports, but I don't need an email every day with the link when I could (theoretically) get to it via the NM Tasks section. Currently this functionality seems to be broken and should be modified to provide the same link as the new emails.
- The benefit of the (previous) daily email report for me was to have an overview of the links followed, allowing a final check for potential malware via the combination GMail/Finjan.
My ideal would therefore be a combination of old and new, and the chance to set the email report frequency to something other than daily (weekly would be optimum for me).
Perhaps we can collate the user requirements via this thread?
Simon T.

SBS2011 Network Reports failing to email

Hello all,
I have a number of SBS2011 machines that are failing to send the daily network reports.
I’ve done some troubleshooting already and cannot resolve it, thus this post.
Neither the scheduled report nor the “generate and e-mail report” method work.
When I try the “generate and e-mail”option, I get the error “An error has occurred while sending this report. As a result, some of the recipients will not receive this report in e-mail”
The following error is also logged in the file C:\Program Files\Windows Small Business Server\Logs\MonitoringServiceLogs\DataServiceComponents.log
[16568] 141022.113000.4756: Messaging: MessagingTaskException: The operation couldn't be performed because object 'NT AUTHORITY\SYSTEM' couldn't be found on SBS.DOMAIN.local'. - Error# (80006)
I’ve read various other posts in this forum and only one post was close but it wasn’t resolved despite someone marking it as resolved after suggesting to run SBS BPA. BPA has been run on this server incidentally and it’s clean. I’ve also followed
the instructions to manually repair the reporting services from the Microsoft blog. Re-created ok but still no joy.
The error message from the DataServiceComponents.log suggests it’s a permissions issue but I don’t know how to resolve it.
I read that the SBSMonAcct account must be enabled for these reports to work yet one of the servers that we maintain that IS sending these reports via email to external addresses has this account disabled (yet the email still comes from
[email protected]). So I am thinking that this account is irrelevant? It was disabled by default on our internal SBS and I tried enabling it but still no joy.
Anyone got any suggestions? Much appreciated.

Hi, apologies for the late reply, I've finally got time to follow this up.
I've unmarked Susan's reply as answer until I have actually fixed it. The linked info seems relevant but isn't hitting it on the head.
Reports cannot be generated manually, they fail whether manual or scheduled. The receive connectors appear fine and are configured correctly. The "Default SERVERNAME"
receive connector is still there and is untouched since the initial fresh install of this server. I verified the config is as per;
and
I will try the fix my network wizard out of hours on our own server and update this post later.

There was an error connecting to the network, try again!

I bought a new Computer (Mac Mini) with Snow Leopard installed; On joining the network(WEP128Bit) airport extremebasestation and airportexpress with WDS-mode) suddenly the basestation didnt offer WEP 128bit any more. I cant remember precisely but i think ist got something to do with the firmwareupdate of the AEBS or that i gave up WDS and changed to „extend a wireles network“ , well it only offered „WEP transitory“ which did not work properly for some reason;
So i changed to WPA/WPA2 option and extending my network with the airport express.
This worked fine; two computers with leopard, the new one with Snow leopard and a windows Laptop as well as two Mobilephones could easily join the network.
BUT: My old Imac G4 with Tiger (10.4.11) could not join so easy.. (I changed the settings to WPA of course) The symptom was that on the right upper corner of the screen a message appeared saying: „there was an error connecting to the network, try again!“ and when i hit the „try again“ button up to 20 times then sometimes it suddenly succeeded to join.
I was just about to look after the wirelesscard but tried before one thing: I changed my network channel on the AEBS from „automatic“ to Channel 11.
From this time on i worked like a charm. I dont know why only the Imac G4 needed channel 11, but this solved my problem.
Message was edited by: Alfi
Message was edited by: Alfi
Message was edited by: Alfi
Message was edited by: Alfi
Message was edited by: Alfi
Message was edited by: Alfi

Here is the list of DHCP Clients:
http://home.earthlink.net/~jeffny0...ExtClients.jpg
(MAC addresses scambled for security)
I am not sure what 192.168.1.193 is ??? The 16 port Asante switch??
Anyone know if there is a way to (easily) add "Client ID" names in XP? I went though my Macs and added names to help ID them in the router, but can't see where to add names in XP?
IP Address: 64.110.135.46
Subnet Mask: 255.255.255.128
Router Address: 65.110.135.1
(posting that does not compromise my security??)
I think I need to figure out how to get the HP 4050 to renew its IP address? Then the router should assign an address to it.....I would like it to use the same address it has now so I don't have to recofigure addresses on the computers to print to it......hummm
DHCP Begining Address: 191.168.1.2
DHCP Ending Address: 191.168.1.200
DHCP Lease: 4 (hours)
COUPLE HOURS LATER......
Just tried turning off the HP 4050 and unplugging it from the wall. Then plugging it (power) back in and turning it on, trying to get it to renew its IP address with the AirPort Extreme router.....nothing. Still does not show up in my list of DHCP Clients.
Tried Restarting the router.....now I see no clients at all in my list of DHCP Client list..... grrrrrr
Can anyone tell me why AirPort Extreme is not seeing the HP 4050 as a DHCP client?
Jeff-

Report server running in integrated mode , but cannot deploy reports again and again prompts for login

Report server running in integrated mode , but cannot deploy reports again and again prompts for login
Nur Mondal

Hello,
How are you deploying the reports? Via Visual Studio, Report builder or manually uploading RDL files?
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

TS4026 Sometimes after I have deleted received messages from my iPad they are resend so they appear again in my inbox. Can this be prevented?

Sometimes after I have deleted received messages from my iPad they are resend so they appear again in my inbox. Can this be prevented?

Downloading (using iOS or computer) past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not all media formats are available in all countries (see: iTunes in the Cloud and iTunes Match Availability by Country - http://support.apple.com/kb/HT5085); apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Downloading previously purchased movies and TV shows requires iTunes 10.6 or later. Discontinued items not available. For items not included in the iCloud list (e.g., ringtones, audiobooks), or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid. Apple notes it is your responsibility to back up your purchases.
Select the iTunes Store on the left side of iTunes.
Click on Purchased on the right side under Quick Links.
You can re-download your available previous purchases.
Reading the limitations mentioned in the first paragraph I would never trust Apple to permanently keep a copy of your purchases. Once you get them on your iPad immediately download them to your computer and then also to your backup drive.

Viewing Network reports

Hi, I purchased the Cisco wireless rounter earlier this year and love it.
I signed up for the network reports with Network Magic but when I click on the email it asks me to download Flashplayer 10.
When I agree it appears to download but I can't find it on my machine and of course can't read the report.
Some software trial ended several weeks ago. Can I get the reports without purchasing it?
I use compuserve and Windows XP Home Ed SP 3.
Can you help me please?

sec wrote:
Hi, I purchased the Cisco wireless rounter earlier this year and love it.
I signed up for the network reports with Network Magic but when I click on the email it asks me to download Flashplayer 10.
When I agree it appears to download but I can't find it on my machine and of course can't read the report.
Some software trial ended several weeks ago. Can I get the reports without purchasing it?
I use compuserve and Windows XP Home Ed SP 3.
Can you help me please?
Hi sec,
Computer Reports is only available for Paid Users of Network Magic Pro 5.5.
The Flash Player 10 or Abobe Flash Player is automatically installed, once downloaded.
http://www.purenetworks.com/product/pro.php
Click on Product Comparison.
thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

I bought new Iphone 5 and trying to activate it. It says itunes cannot connect to network try again?

This new iphone 5. i try activating it on wifi through phone it says i need sim card. and using itunes it says error cannot connect to itunes network try again. This is gsm unlock phone !

Did the receipt say unlocked? Apple sells iPhones without a contract but
still tied to a wireless carrier, and iPhones that are not tied to a wireless
carrier. Both are are the same price. Price paid is not a guarantee of an
unlocked iPhone.
What does it say when you look at Settings=>General=About=>Carrier?

Wireless network report says that the wireless radio is not fuctioning

I have a C309a HP printer. When I updated my laptop from Vista to windows 7 and try to connect to the wireless printer, it will not connect wirelessly. When I print the Wireless network Test Report the report says that the Wireless radio in the printer is not functioning. Do I need to buy another printer???? I have gone into the wireless radio selection and made sure that it is set to on.

Hello Jawhited,
It might be possible that the printer is not able to initialize the printers wifi adapter. There are a few steps that I would try before looking for a other printer. One of them is contacting your local HP support. Often with a reset, they might be able to to re-initialize the printer in a attempt that it would re-enable the printers wifi card.
What could also help, is making sure that Bluetooth is disabled, or first disabling every communication option and then re-enable the wifi radio only. Though as I said before, make sure to contact you local support for any further options they might have.
Kind regards,
van Baardewijk

Schedule webi report to destination to Inbox AND send email notification

I'm writing a new process that will schedule a webi report. The output of the report needs to be delivered to multiple user's BO Inboxes AND an email notification (without the report attached) needs to be sent telling them that they have a new report to view in their Inbox. Trying to mimic how this is done via CMC Schedule - Notification and Destination tabs.
I can get it to deliver the report to the Inbox and I can get it to send an email seperately, but the problem I'm running into is that I can't get it to do both in the same process. Here is the code snippet that I've written. Any assistance would be appreciated.
// Retrieve the managed plugin
IInfoObjects managedInfoObjects = infoStore.query("Select SI_DEST_SCHEDULEOPTIONS, SI_PROGID From CI_SYSTEMOBJECTS Where SI_NAME = 'CrystalEnterprise.Managed'");
IInfoObject infoObject = (IInfoObject)managedInfoObjects.get(0);
IDestinationPlugin destinationPlugin = (IDestinationPlugin)infoObject;
IManaged managed = (IManaged)destinationPlugin;
// Set the destination to inbox
IManagedOptions managedOptions = (IManagedOptions)managed.getScheduleOptions();
managedOptions.setDestinationOption(IManagedOptions.CeDestinationOption.ceInbox);
managedOptions.setSendOption(IManagedOptions.CeManagedSendOption.ceCopy);
managedOptions.setIncludeInstance(true);
managedOptions.getDestinations().add(new Integer(ditUserID1));
managedOptions.getDestinations().add(new Integer(ditUserID2));
managedOptions.getDestinations().add(new Integer(ditUserID3));
scheduleInfo.getDestination().setFromPlugin(managed);
// Retrieve the smtp plugin. to send email notification
IInfoObjects smtpInfoObjects = infoStore.query("Select SI_DEST_SCHEDULEOPTIONS, SI_PROGID From CI_SYSTEMOBJECTS Where SI_PARENTID = 29 AND SI_NAME = 'CrystalEnterprise.Smtp'");
IInfoObject smtpInfoObject = (IInfoObject)smtpInfoObjects.get(0);
IDestinationPlugin smtpDestinationPlugin = (IDestinationPlugin)smtpInfoObject;
// Set to email notification on success
ISMTP smtp = (ISMTP)smtpDestinationPlugin;
ISMTPOptions smtpOptions = (ISMTPOptions)smtp.getScheduleOptions();
smtpOptions.setServerName("mailhost.XXXXX.net");
smtpOptions.setPort(25);
smtpOptions.setDomainName("XXXXX.com");
smtpOptions.setSenderAddress("XXXXX.com");
smtpOptions.setSubject("Indicative Data Update Reports");
smtpOptions.getToAddresses().add("XXXXX.com");
smtpOptions.setMessage("Test Message");
smtpOptions.setSMTPAuthenticationType(CeSMTPAuthentication.NONE);
scheduleInfo.getNotifications().getDestinationsOnFailure().add("New");
scheduleInfo.getDestination().setFromPlugin(smtp);
Edited by: Shannon Maret on Apr 21, 2009 7:02 PM

One thing to keep in mind is that "scheduling to SMTP" is different from "scheduling with email notification", and it looks like you're conflating the two. The ISchedulingInfo.getDestinations() is the access point for scheduling to SMTP and ISchedulingINfo.getNotifications() is the access point for scheduling with Notification.
> scheduleInfo.getNotifications().getDestinationsOnFailure().add("New");
You'd add the SI_PROGID of the SMTP Destination here, and work with the returned IDestination to set the destination parameters.
Sincerely,
Ted Ueda

Sharing network problem - again

Hi, i hoped to avoid posting this problem, but i just can't get internet sharing working!
My setup is this: I have a PC connected directly to a adsl-modem via a netcard, and via a second netcard (and a crossed cable) i have a second PC connected to the first, both are running Archlinux, the first is up to date, but the second is 0.6 (since i can't update...).
The 2 PC's have no problems communicating, ping and ssh is working perfectly both ways.
To share the connection, i have this in the rc.conf:
The one connected to the modem:
lo="lo 127.0.0.1"
eth0="dhcp"
eth1="eth1 192.168.1.1 netmask 255.255.255.0 broadcast 192.168.1.255"
INTERFACES="lo eth0 eth1"
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# (prefix a route in ROUTES with a ! to disable it)
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
The one needing the connection:
lo="lo 127.0.0.1"
eth0="eth0 192.168.1.2 netmask 255.255.255.0 broadcast 192.168.1.255"
#eth0="dhcp"
INTERFACES=(lo eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# (prefix a route in ROUTES with a ! to disable it)
gateway="default gw 192.168.1.1"
ROUTES=(gateway)
And i have this "firewall" installed on the one connected to the internet:
#!/bin/sh
# rc.firewall-2.4
FWVER=0.75
# Initial SIMPLE IP Masquerade test for 2.4.x kernels
# using IPTABLES.
# Once IP Masquerading has been tested, with this simple
# ruleset, it is highly recommended to use a stronger
# IPTABLES ruleset either given later in this HOWTO or
# from another reputable resource.
# Log:
# 0.75 - Added more kernel modules to the comments section
# 0.74 - the ruleset now uses modprobe vs. insmod
# 0.73 - REJECT is not a legal policy yet; back to DROP
# 0.72 - Changed the default block behavior to REJECT not DROP
# 0.71 - Added clarification that PPPoE users need to use
# "ppp0" instead of "eth0" for their external interface
# 0.70 - Added commented option for IRC nat module
# - Added additional use of environment variables
# - Added additional formatting
# 0.63 - Added support for the IRC IPTABLES module
# 0.62 - Fixed a typo on the MASQ enable line that used eth0
# instead of $EXTIF
# 0.61 - Changed the firewall to use variables for the internal
# and external interfaces.
# 0.60 - 0.50 had a mistake where the ruleset had a rule to DROP
# all forwarded packets but it didn't have a rule to ACCEPT
# any packets to be forwarded either
# - Load the ip_nat_ftp and ip_conntrack_ftp modules by default
# 0.50 - Initial draft
echo -e "nnLoading simple rc.firewall version $FWVER..n"
# The location of the iptables and kernel module programs
# If your Linux distribution came with a copy of iptables,
# most likely all the programs will be located in /sbin. If
# you manually compiled iptables, the default location will
# be in /usr/local/sbin
# ** Please use the "whereis iptables" command to figure out
# ** where your copy is and change the path below to reflect
# ** your setup
#IPTABLES=/sbin/iptables
IPTABLES=/usr/sbin/iptables
DEPMOD=/sbin/depmod
MODPROBE=/sbin/modprobe
#Setting the EXTERNAL and INTERNAL interfaces for the network
# Each IP Masquerade network needs to have at least one
# external and one internal network. The external network
# is where the natting will occur and the internal network
# should preferably be addressed with a RFC1918 private address
# scheme.
# For this example, "eth0" is external and "eth1" is internal"
# NOTE: If this doesnt EXACTLY fit your configuration, you must
# change the EXTIF or INTIF variables above. For example:
# If you are a PPPoE or analog modem user:
# EXTIF="ppp0"
EXTIF="eth0"
INTIF="eth1"
echo " External Interface: $EXTIF"
echo " Internal Interface: $INTIF"
#======================================================================
#== No editing beyond this line is required for initial MASQ testing ==
echo -en " loading modules: "
# Need to verify that all modules have all required dependencies
echo " - Verifying that all kernel modules are ok"
$DEPMOD -a
# With the new IPTABLES code, the core MASQ functionality is now either
# modular or compiled into the kernel. This HOWTO shows ALL IPTABLES
# options as MODULES. If your kernel is compiled correctly, there is
# NO need to load the kernel modules manually.
# NOTE: The following items are listed ONLY for informational reasons.
# There is no reason to manual load these modules unless your
# kernel is either mis-configured or you intentionally disabled
# the kernel module autoloader.
# Upon the commands of starting up IP Masq on the server, the
# following kernel modules will be automatically loaded:
# NOTE: Only load the IP MASQ modules you need. All current IP MASQ
# modules are shown below but are commented out from loading.
# ===============================================================
echo "----------------------------------------------------------------------"
#Load the main body of the IPTABLES module - "iptable"
# - Loaded automatically when the "iptables" command is invoked
# - Loaded manually to clean up kernel auto-loading timing issues
echo -en "ip_tables, "
$MODPROBE ip_tables
#Load the IPTABLES filtering module - "iptable_filter"
# - Loaded automatically when filter policies are activated
#Load the stateful connection tracking framework - "ip_conntrack"
# The conntrack module in itself does nothing without other specific
# conntrack modules being loaded afterwards such as the "ip_conntrack_ftp"
# module
# - This module is loaded automatically when MASQ functionality is
# enabled
# - Loaded manually to clean up kernel auto-loading timing issues
echo -en "ip_conntrack, "
$MODPROBE ip_conntrack
#Load the FTP tracking mechanism for full FTP tracking
# Enabled by default -- insert a "#" on the next line to deactivate
echo -en "ip_conntrack_ftp, "
$MODPROBE ip_conntrack_ftp
#Load the IRC tracking mechanism for full IRC tracking
# Enabled by default -- insert a "#" on the next line to deactivate
echo -en "ip_conntrack_irc, "
$MODPROBE ip_conntrack_irc
#Load the general IPTABLES NAT code - "iptable_nat"
# - Loaded automatically when MASQ functionality is turned on
# - Loaded manually to clean up kernel auto-loading timing issues
echo -en "iptable_nat, "
$MODPROBE iptable_nat
#Loads the FTP NAT functionality into the core IPTABLES code
# Required to support non-PASV FTP.
# Enabled by default -- insert a "#" on the next line to deactivate
echo -en "ip_nat_ftp, "
$MODPROBE ip_nat_ftp
#Loads the IRC NAT functionality into the core IPTABLES code
# Required to support NAT of IRC DCC requests
# Disabled by default -- remove the "#" on the next line to activate
#echo -e "ip_nat_irc"
#$MODPROBE ip_nat_irc
echo "----------------------------------------------------------------------"
# Just to be complete, here is a partial list of some of the other
# IPTABLES kernel modules and their function. Please note that most
# of these modules (the ipt ones) are automatically loaded by the
# master kernel module for proper operation and don't need to be
# manually loaded.
# ip_nat_snmp_basic - this module allows for proper NATing of some
# SNMP traffic
# iptable_mangle - this target allows for packets to be
# manipulated for things like the TCPMSS
# option, etc.
# ipt_mark - this target marks a given packet for future action.
# This automatically loads the ipt_MARK module
# ipt_tcpmss - this target allows to manipulate the TCP MSS
# option for braindead remote firewalls.
# This automatically loads the ipt_TCPMSS module
# ipt_limit - this target allows for packets to be limited to
# to many hits per sec/min/hr
# ipt_multiport - this match allows for targets within a range
# of port numbers vs. listing each port individually
# ipt_state - this match allows to catch packets with various
# IP and TCP flags set/unset
# ipt_unclean - this match allows to catch packets that have invalid
# IP/TCP flags set
# iptable_filter - this module allows for packets to be DROPped,
# REJECTed, or LOGged. This module automatically
# loads the following modules:
# ipt_LOG - this target allows for packets to be
# logged
# ipt_REJECT - this target DROPs the packet and returns
# a configurable ICMP packet back to the
# sender.
echo -e " Done loading modules.n"
#CRITICAL: Enable IP forwarding since it is disabled by default since
# Redhat Users: you may try changing the options in
# /etc/sysconfig/network from:
# FORWARD_IPV4=false
# to
# FORWARD_IPV4=true
echo " Enabling forwarding.."
echo "1" > /proc/sys/net/ipv4/ip_forward
# Dynamic IP users:
# If you get your IP address dynamically from SLIP, PPP, or DHCP,
# enable this following option. This enables dynamic-address hacking
# which makes the life with Diald and similar programs much easier.
echo " Enabling DynamicAddr.."
echo "1" > /proc/sys/net/ipv4/ip_dynaddr
# Enable simple IP forwarding and Masquerading
# NOTE: In IPTABLES speak, IP Masquerading is a form of SourceNAT or SNAT.
# NOTE #2: The following is an example for an internal LAN address in the
# 192.168.0.x network with a 255.255.255.0 or a "24" bit subnet mask
# connecting to the Internet on external interface "eth0". This
# example will MASQ internal traffic out to the Internet but not
# allow non-initiated traffic into your internal network.
# ** Please change the above network numbers, subnet mask, and your
# *** Internet connection interface name to match your setup
#Clearing any previous configuration
# Unless specified, the defaults for INPUT and OUTPUT is ACCEPT
# The default for FORWARD is DROP (REJECT is not a valid policy)
echo " Clearing any existing rules and setting default policy.."
$IPTABLES -P INPUT ACCEPT
$IPTABLES -F INPUT
$IPTABLES -P OUTPUT ACCEPT
$IPTABLES -F OUTPUT
$IPTABLES -P FORWARD DROP
$IPTABLES -F FORWARD
$IPTABLES -t nat -F
echo " FWD: Allow all connections OUT and only existing and related ones IN"
$IPTABLES -A FORWARD -i $EXTIF -o $INTIF -m state --state ESTABLISHED,RELATED -j ACCEPT
$IPTABLES -A FORWARD -i $INTIF -o $EXTIF -j ACCEPT
$IPTABLES -A FORWARD -j LOG
echo " Enabling SNAT (MASQUERADE) functionality on $EXTIF"
$IPTABLES -t nat -A POSTROUTING -o $EXTIF -j MASQUERADE
echo -e "nrc.firewall-2.4 v$FWVER done.n"
And to start it:
#!/bin/sh
# chkconfig: 2345 11 89
# description: Loads the rc.firewall-2.4 ruleset.
# processname: firewall-2.4
# pidfile: /var/run/firewall.pid
# config: /etc/rc.d/rc.firewall-2.4
# probe: true
# v05/24/03
# Part of the copyrighted and trademarked TrinityOS document.
# http://www.ecst.csuchico.edu/~dranch
# Written and Maintained by David A. Ranch
# [email protected]
# Updates
# 05/24/03 - removed a old networking up check that had some
# improper SGML ampersand conversions.
# Source function library.
. /etc/rc.d/functions
# Check that networking is up.
[ "XXXX${NETWORKING}" = "XXXXno" ] && exit 0
[ -x /sbin/ifconfig ] || exit 0
# The location of various iptables and other shell programs
# If your Linux distribution came with a copy of iptables, most
# likely it is located in /sbin. If you manually compiled
# iptables, the default location is in /usr/local/sbin
# ** Please use the "whereis iptables" command to figure out
# ** where your copy is and change the path below to reflect
# ** your setup
IPTABLES=/usr/sbin/iptables
# See how we were called.
case "$1" in
start)
/etc/rc.firewall-2.4
stop)
echo -e "nFlushing firewall and setting default policies to DROPn"
$IPTABLES -P INPUT DROP
$IPTABLES -F INPUT
$IPTABLES -P OUTPUT DROP
$IPTABLES -F OUTPUT
$IPTABLES -P FORWARD DROP
$IPTABLES -F FORWARD
$IPTABLES -F -t nat
# Delete all User-specified chains
$IPTABLES -X
# Reset all IPTABLES counters
$IPTABLES -Z
restart)
$0 stop
$0 start
status)
$IPTABLES -L
mlist)
cat /proc/net/ip_conntrack
echo "Usage: firewall-2.4 {start|stop|status|mlist}"
exit 1
esac
exit 0
But it just won't work! If you can spot any problems please let me know!
UPDATE:
Just talked to my ISP, and they tell me that my IP-adress is locked to one PC. Could this be the problem? or does the forwarding handles this as well?

Hey tgc, thank you for posting your problem so generously explained!
I had no idea of how to do it, and I only had to change a small obvious typo to make it work. At least I suppose the typo is the reason for your sharing not to work....
Lets see...did you change the
eth0="eth0 192.168.1.2 netmask 255.255.255.0 broadcast 192.168.0.255"
to
eth0="eth0 192.168.1.2 netmask 255.255.255.0 broadcast 192.168.1.255"
just now? I'm sure I had to change that, but I have a strange memory
So, the way the configuraton looks now, works perfectly for sharing my isdn connection with my laptop over wlan.
Desktop: isdn, eth0 -> wireless router / hub
Laptop: wlan0
So, what I'm saying anyway, is that your configuration works for me Thanks!

Standard Network Report

Hello,
Is there any report available, where the std Network is the input and output should be the operative WBS elemnets .i,e a standard network is used in some 100 projects,if I the std network as input the report should display all WBS elements in which this std network is used.
Thanks and Regards
Sharad.

Hi,
Create a small Query linking AFKO, AUFK tables....
Hope this helps.
Regards, Murugesh

Normal Report output to SAP Inbox

Hi Gurus,
I have written a normal report,which gives some output when I execute it.
Now my job is to run this report program in background for every month end.
I know how to schedule this job.
But how to get/store the output of that report in SAP INBOX.
Plz guide me.
Thanks,
Dheeru.

Dear,
Maintain Sap Id in spool list receipts while creating job to trigger mail to SAP Inbox.
Regards,
Piyush

Hey - NM network reports again in my Inbox

Similar Messages

Maybe you are looking for