Hey Sparc Gurus -- Help! (Java is slow on my Workstation)
I recently purchased a second hand Ultra 30 for doing Java development. The machine is seeemingly in good condition but runs very slow. My understanding was that the 296MHz Sparc II processor would be magnitudes faster than the P3-700 in my Thinkpad...was I wrong to think this?
Anyway, when doing GUI development with Forte, I'm finding the speed to be much slower on my Sparc workstation than it is on my Thinkpad. Both have 256MB RAM.
My question is, does the default install of Solaris 8 require tuning to get the Workstation to perform better? If so, how is it done? A friend told me the OS may be limiting utilization of the processor by any one process to 50%, does this sound reasonable?
I've loaded JDK1.4 and patched the system according to Hoyle. The 64bit JVM has been installed.
As an aside, the bar graph at the bottom of the CDE looks like it's pegging even when I do simple operations. The bottom half is blue and the top half red. What does this mean? Is the processor being 100% utiliized or only 50% utilized?
Your help is appreciated!
A Sparc II at 296MHz is actually going to be quite a bit slower than a PIII at 700MHz. Not sure where you got the reverse impression. Consider these spec.org benchmark results:
Dell Precision 420 @733MHz -> http://www.spec.org/osg/jvm98/results/res2000q2/jvm98-20000502-03335.g.html
Sun Ultra 60 @ 296MHz -> http://www.spec.org/osg/cpu95/results/res98q1/cpu95-980127-02362.html
Memory may be an issue- 256MB isn't all that generous for Forte plus Solaris. You might take a peek at paging rates and such as well as GC rates within Forte.
Some of the problem may be with the performance of Swing on Solaris 8 and your graphics subsystem. You might try to find tips for optimizing that.
Similar Messages
-
Hey my iphone 5 is very slow when i download apps can any wan help me pleas ??
hey my iphone 5 is very slow when i download apps can any wan help me pleas my iphone 4 is much much better then the new iphone 5
I'm facing the same problem on my iPhone 5 , shame on you apple .
-
Hey guys, i am trying to slow down the velocity on a tittle in order people can read it properly. Any suggestions?
speed = distance x time
so, to slow down speed, your clip/title has to be 'longer'. -
I am learning Java. I heard many people saying that Java is slow compared to other languages C,C++. What does that really mean?
Java is run on top of what they call a Java Virtual Machine (JVM). When you compile your code, javac produces a class file which contains a byte-code that can be interpreted and run by JVM later on (using java command). So, your java program run on (controlled by) another progam (JVM), unlike C/C++ excutables, which are run on the hardware. This scenario ensures compatibility with any platform you run your Java code on.
Basically it's like this :
| Java Classes |
|
| | |
| JVM for Win | | JVM for UNIX | | JVM for MacOS |
| | |
| Hardware |
But, no matter what your friends say, Java is a pefrectly suitable for almost any program that you'd write :)) -
hey i need help with my ipod, i try to download facebook app and it wouldn't let me because it say ios 4.1 require and i dont have ios how do i get it ? please i need help ASAP
What generation of iPod touch do you have? If you don't know, see:
http://support.apple.com/kb/HT1353
If you have an first-generation iPod touch, it can only go to iOS 3.1.3 and hence will not run the Facebook app. If you have a second-generation iPod touch, see:
http://support.apple.com/kb/HT4623
Regards. -
Hey guys need help regarding iTunes U. My school is moving for iOS and Mac in the classroom and I have been appointed Junior Administrator for the schools technical department and integrating these devices into the classroom.
I have an appointment with a director on Tuesday. I want to demo iTunes U. Problem is I have never used it before and have no idea how to set it up and even if I should sign up.
Please help any ideas regarding iTunes U and how I should direct the meeting tomorrow.
Please please post here.
Thanks
TiaanGreetings fcit@!A,
After reviewing your post, it sounds like you are not able to select none as your payment type. I would recommend that you read this article, it may be able to help the issue.
Why can’t I select None when I edit my Apple ID payment information? - Apple Support
Thanks for using Apple Support Communities.
Take care,
Mario -
hey please please help me my serial no - DN******TWF.my iphone got water damaged but apple says this serial no has replaced but i had never replaced i lost my thousands.please tell me what to do.my iphone 5 is in dead conditions.how can i get my refund? means how to get replacement or other chances to get my ruppe refund?for god say please help my please...!!
<Personal Information Edited by Host>Sorry, it appears you were scammed. The phone you have was replaced, either under warranty, or as an out of warranty replacement, & should have been returned to Apple. Unfortunately, some unscrupulous retailers will fix these phones, & then re-sell them. Your only option is to go back to whoever you purchased the phone from & confront them
-
hey i need help my iphone 5 all of a sudden has like an all white border around it and sometimes it has a blank screen what seems to be the problem?
Try turning off the following:
Settings>Mail, Contacts, Calendars>Push>OFF
Settings>Notifications>Mail>Gmail>Notification Center>OFF
Settings>Mail, Contacts, Calendars>Fetch New Data>Off -
Need help with a slow mid-2009 MBP
Hello - I have read various threads on the subject of slow running MBP's and have attached Etrecheck results. I am running Yosemite and have the latest updates (as of today at least!). I don't seem to have any of the problem software that others have suggested removing - but am sure there is something I am probably missing. My MBP is going slower and slower by the day - especially if I want to use Lightroom, then it comes to a screeching halt. I do seem to be able to use Safari and Word at the same time, but they tend to get pretty slow after a time as well. Any and all recommendations greatly appreciated! Please note though, that I do not have the ability to upgrade to SSD at the moment, but maybe can manage new and increased RAM (I think my only options are to get 2 4x4's or a single 8?) if thats the only option. Cheers!
EtreCheck version: 2.0.11 (98)
Report generated November 14, 2014 at 10:34:45 PM CST
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2009) (Verified)
MacBook Pro - model: MacBookPro5,5
1 2.53 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400M - VRAM: 256 MB
DELL U2412M 1920 x 1200
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 0:11:2
Disk Information: ℹ️
Hitachi HTS545032B9SA02 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (125.63 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GS23N
USB Information: ℹ️
Apple Inc. Built-in iSight
Western Digital My Passport 0748 1 TB
S.M.A.R.T. Status: Verified
disk1s1 (disk1s1) <not mounted> : 32 KB
disk1s2 (disk1s2) <not mounted> : 29 KB
disk1s3 (disk1s3) <not mounted> : 29 KB
disk1s4 (disk1s4) <not mounted> : 29 KB
disk1s5 (disk1s5) <not mounted> : 29 KB
disk1s6 (disk1s6) <not mounted> : 262 KB
disk1s7 (disk1s7) <not mounted> : 262 KB
disk1s8 (disk1s8) <not mounted> : 262 KB
My Passport for Mac (disk1s10) /Volumes/My Passport for Mac : 1.00 TB (112.39 GB free)
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[running] com.adobe.AdobeCreativeCloud.plist Support
[not loaded] com.cooliris.SetLaunchArch.plist Support
[loaded] com.google.keystone.agent.plist Support
[running] jp.co.canon.CUPSCMFP.BG.plist Support
[running] jp.co.canon.CUPSFAX.BG.plist Support
[running] jp.co.canon.ScanGearMF.appl.Canon-MF-Scan-Agent.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[running] com.hitachigst.backup.agent.plist Support
[running] com.microsoft.LaunchAgent.SyncServicesAgent.plist Support
User Login Items: ℹ️
Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
Dropbox Application (/Applications/Dropbox.app)
AdobeResourceSynchronizer UNKNOWNHidden (missing value)
Microsoft Database Daemon Application (/Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app)
HP Communications Application (/Library/Printers/hp/HP Communications.app)
Director Docker Application (/Applications/Hewlett-Packard/HP Photo and Imaging Software/HP Photo and Imaging Director/Director Docker.app)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
Google Earth Web Plug-in: Version: 7.1 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.4.0.11 Support
CoolirisWebKitPlugin: Version: (null) Support
OfficeLiveBrowserPlugin: Version: 12.3.3 Support
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
QuickTime Plugin: Version: 7.7.3
GarminGpsControl: Version: 4.1.0.0 Release - SDK 10.7 Support
CANONiMAGEGATEWAYDL: Version: 3.0.0.2 Support
SharePointBrowserPlugin: Version: 14.4.3 - SDK 10.6 Support
Safari Extensions: ℹ️
ClickToPlugin
3rd Party Preference Panes: ℹ️
Flash Player Support
Flip4Mac WMV Support
MacFUSE Support
NTFS-3G Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Destinations:
My Passport for Mac [Local]
Total size: 1.00 TB
Total number of backups: 72
Oldest backup: 2014-01-13 20:17:32 +0000
Last backup: 2014-11-15 03:43:37 +0000
Size of backup disk: Excellent
Backup size 1.00 TB > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
7% WindowServer
3% mds
0% AppleSpell
0% fontd
0% mds_stores
Top Processes by Memory: ℹ️
168 MB Safari
116 MB mds_stores
112 MB ocspd
99 MB com.apple.IconServicesAgent
86 MB Creative Cloud
Virtual Memory Information: ℹ️
1.36 GB Free RAM
1.60 GB Active RAM
531 MB Inactive RAM
534 MB Wired RAM
505 MB Page-ins
0 B Page-outsFirst, get rid of "Memory Clean," which is at best useless. That alone might solve your problem. If not, see below.
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.FolderActions.folders com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper ' ' 879294308 461455494 3627668074 1083382502 1274181950 1855907737 1848501757 464843899 3694147963 1417519526 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 3301885676 891055588 998894468 695903914 1443423563 4136085286 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|Roame|SMC:|suhel| VALI|ver-r|xpma' -o -o -k Sender fseventsd -k Message Req SL -o -k Sender Req launchd -k Message Req de: " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Java Applet - slow response over WAN and fast on LAN
Hi All,
Using Tomcat we have a Java applet that runs very slow over the Internet but just the opposite on the LAN (fast). On our website we have a link that we click which initializes the application. it is very slow but if the same link is clicked on the LAN it is very fast in responding. We have a 10MB internet connection and even when testing with very little traffic after peak business hours we have same results.When closing the browser and reopening it is much faster the second time. This tells me it is being Cached. If I go to a system that has never accessed the applet we are very slow again. We are hosting this application for a 3rd party so we did not write the code. This company is finger pointing at Router and I am finger pointing at Java application itself maybe not being optimal.
I am attaching "debug" info from Java Console. Can anyone identify any issues from this debug output or familiarity with this type issue. Your insight is greatly appreciated.
Java Plug-in 1.5.0_01
Using JRE version 1.5.0_01 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\Administrator
network: Loading user-defined proxy configuration ...
network: Done.
network: Loading proxy configuration from Netscape Navigator ...
network: Reading user preference file from C:\DOCUMENTS AND SETTINGS\ADMINISTRATOR\APPLICATION DATA\Mozilla\Profiles\default\4i0ghip7.slt\prefs.js
network: Done.
network: Loading browser proxy configuration ...
network: Done.
network: Proxy Configuration: Browser Proxy Configuration
basic: Cache is enabled
basic: Location: C:\Documents and Settings\Administrator\Application Data\Sun\Java\Deployment\cache\javapi\v1.0
basic: Maximum size: unlimited
basic: Compression level: 0
basic: Registered modality listener
basic: Referencing classloader: sun.plugin.ClassLoaderInfo@b1b4c3, refcount=1
network: Connecting http://www.mgaucb.com/gottlieb/images/codonix.png with proxy=DIRECT
basic: Loading applet ...
basic: Initializing applet ...
basic: Starting applet ...
Internal Version: 3.0.35 Build id: TB-200402041305-35
Mar 7, 2009 1:12:03 AM com.codonix.trackerboard.gui.TrackerBoardApplet start(null:-1)
INFO: Internal Version: 3.0.35 Build id: TB-200402041305-35
Codebase: http://www.mgaucb.com/gottlieb/
Mar 7, 2009 1:12:03 AM com.codonix.trackerboard.gui.TrackerBoardApplet start(null:-1)
INFO: Codebase: http://www.mgaucb.com/gottlieb/
Documentbase: http://www.mgaucb.com/gottlieb/TBUC.html
Mar 7, 2009 1:12:03 AM com.codonix.trackerboard.gui.TrackerBoardApplet start(null:-1)
INFO: Documentbase: http://www.mgaucb.com/gottlieb/TBUC.html
WebAppPath: /gottlieb
Mar 7, 2009 1:12:03 AM com.codonix.trackerboard.gui.TrackerBoardApplet start(null:-1)
INFO: WebAppPath: /gottlieb
basic: Modality pushed
basic: Modality popped
network: Connecting socket://www.mgaucb.com:80 with proxy=DIRECT
Initial Trackerboard/Table: TBUrgentCare/null
Mar 7, 2009 1:12:35 AM com.codonix.trackerboard.gui.TrackerBoardApplet doLogin(null:-1)
INFO: Initial Trackerboard/Table: TBUrgentCare/null
SiteID: CodoniX
Mar 7, 2009 1:12:35 AM com.codonix.trackerboard.gui.TrackerBoardApplet doLogin(null:-1)
INFO: SiteID: CodoniX
liveconnect: the url of the applet is http://www.mgaucb.com and the permission is = false
liveconnect: JavaScript: calling Java system code
liveconnect: JavaScript: default security policy = http://www.mgaucb.com
liveconnect: JavaScript: calling Java system code
liveconnect: JavaScript: default security policy = http://www.mgaucb.com
Starting UI Generator....
liveconnect: JavaScript: calling Java system code
liveconnect: JavaScript: default security policy = http://www.mgaucb.com
Warning: No permission to control logging.
Mar 7, 2009 1:12:58 AM com.codonix.uigenerator.StartApplet init(null:-1)
WARNING: No permission to control logging.
Warning: No permission to control logging.
Mar 7, 2009 1:12:58 AM com.codonix.uigenerator.StartApplet init(null:-1)
WARNING: No permission to control logging.
liveconnect: JavaScript: calling Java system code
liveconnect: JavaScript: default security policy = http://www.mgaucb.com
liveconnect: JavaScript: calling Java system code
liveconnect: JavaScript: default security policy = http://www.mgaucb.com
liveconnect: JavaScript: calling Java system code
network: Connecting socket://www.mgaucb.com:80 with proxy=DIRECTHi Geoff,
Thanks for posting here.
Have you checked your internet edge router ? and make sure there is no any speed limitation set on it , like QOS.
You may also try the methods below:
1. Disable RSS, Chimney, AutoTuning on 2008R2
How to know if TCP offload is working
http://blogs.technet.com/b/brad_rutkowski/archive/2007/08/10/how-to-know-if-tcp-offload-is-working.aspx
2. Install Hotfix 982860
A computer that is running Windows 7 or Windows Server 2008 R2 takes four minutes to open a Microsoft Office 2003 document from a network share
http://support.microsoft.com/kb/982860
Thanks.
Tiger Li
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
hey i am running the following code
if(o==b2)
fbalance.setVisible(true);
fwelcome.setVisible(false);
if(o==b8)
String stracc=tacc.getText();
String strid=tid.getText();
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection con=DriverManager.getConnection("jdbc:odbc:data","sa","ferrari123");
PreparedStatement s=con.prepareStatement("select balance from acc_table where acc_no=? and id=?");
s.setString(1,stracc);
s.setString(2,strid);
ResultSet rs=s.executeQuery();
while(rs.next())
tbal.setText(rs.getString("Balance"));
and the following exception occurs, although all the credentials mentioned in the above code are correct with respect to my database file
*java.sql.SQLException: [Microsoft][ODBC SQL Server Driver][SQL Server]Invalid object name 'acc_table'.*+
{font:#mce_temp_font#}so somebody please...help me out with this....!!!!!{font}
Edited by: 12tvt38520141 on Feb 23, 2010 4:40 PM12tvt38520141 wrote:
yes there are many default datbases(adventure n adnevture DW)....but i've made a new database in which my table 'acc_table' is present....although few days back there was no such exception....but after my new OS installation....it's givin such exceptions...:(So you messed up the install. Or messed up the code. Or both.
Figure out which and fix it. -
Is Java application slow down computer??
Hi all,
I was a newbie in java programming. I wanna make application with java, but some of my friend told me that java application can make u're system run slow cause u have to import all the classes that u need for u're application.
I wanna ask is java programming is slow down system when I compile and run the application that made u're application that I've made respond slowly?? How to avoid this??
Thanks for u're help.
My regrardsHi all,
I was a newbie in java programming. I wanna make
application with java, but some of my friend told me
that java application can make u're system run slow
cause u have to import all the classes that u need
for u're application.
I wanna ask is java programming is slow down system
when I compile and run the application that made u're
application that I've made respond slowly?? How to
avoid this??when you do something on your computer resources will be used. if you don't want to use computer resources turn the computer off.
if you don't want to program in java dont, noone is forcing you. when java runs it will load up a vm and a library for it. that's the way it is. it may take a little longer then the equiv native app, but that's because the native app's vm and so on is ALREADY loaded (it's the OS).
in summary: deal with it. it's not that bad. there are some very good examples of java desktop apps that work well; azereus being one, i'm sure there are others. -
Im a Uni student&need help:JAVA Final Year Project: Undo Manager Problem
Hey all,
Im writing a Final Year Project and have minimal experience writing in JAVA.
It is an information visualisation assignment which involves reproducing code/text in a reduced format. Sort of to do with Line oriented statistics.
http://www.cc.gatech.edu/aristotle/Tools/tarantula/continuous.gif
This image will give you an idea of what im talking about.
Anyway, i need to know if its possible to get information about individual undos/edits from an undomanager.
Basically i need to be able to say, for example,
there are 12 undos
undo 12 occurs at line X
undo 11 occurs at line Y
etc etc
I need to be able to get this information without actually invoking the Undo last edit call.
Im bringing the Java undomanager tutorial home but from what ive read it seems like impossible?
Any and all help appreciated.
Regards,
PWhen I was at uni I had to implement that for the text area of an IDE. All I did was rip off the code from the Notepad.java that comes with the SDK.
-
Need Major Help Running Really Slow!!!
Hey guys, I am not new to macs at all, I have had this computer since the macbooks first came out. Ok, so recently its been running so slow, I have done everything, running maitence scripts and a bunch of matinece programs and the such. I have also cleared out stuff that I don't use and its still slow, it allso tends to feeze up on me every now and then! Need help!
TIA!This is what I have done in a similar situation. Back up your system and reinstall your OS. Then add your stuff back in and see how it runs. Just wondering how much RAM you are running?
-
Help, Java newbie a little over my head with LDAP
I'm actually a network admin but I've been dabling in Java for a little while now.
I am trying to write an app that will allow me to insert and remove attributes to entries in Active Directory.
I have found some sample code which I have altered to make a "proof of concept" before I start on the actuall app I want.
The problem I am having is writing into the AD. I can query entries with no error but when I try a modification I get an "DSA is unwilling to perform" LDAPException. I am pretty sure it's not a permissions issue but from reading stuff on here I am begnining to think that it may have something to do with SSL connections. There is commented out code below where I experimented with this but I was unable to connect the the AD when this was in. "unable to connect to the directory server error".
If anyone can offer me any advice I would be most grateful.
package LDAPTest;
import netscape.ldap.*;
import java.util.*;
import com.novell.service.ndssdk.jndi.ldap.ssl.*;
// Simple program to experiment with searching LDAP
public class FilterSearch
public static void main(String[] args)
if(args.length != 6)
System.out.println("Usage: java FilterSearch " +
"<host> <port> "+
"<authdn> <password> "+
"<basedn> <filter> ");
System.exit(1);
String host = args[0];
int port = Integer.parseInt(args[1]);
String authid = args[2];
String authpw = args[3];
String base = args[4];
String filter = args[5];
String[] ATTRS = {"memberOf"};
int status = -1;
//SSL experiment that would not connect to the AD server.
//LDAPConnection ld = new LDAPConnection(new LDAPSSLSocketFactory("com.novell.service.ndssdk.jndi.ldap.ssl.LdapSecureSocketFactory"));
LDAPConnection ld = new LDAPConnection();
System.out.println("done connection");
try
//Connect to server and authenticate
ld.connect(host, port,authid,authpw);
System.out.println("Search filter = " +filter);
LDAPSearchResults res = ld.search(base, ld.SCOPE_SUB, filter, null, false);
//Loop on results until complete
while(res.hasMoreElements())
try
//Next Directory entry
LDAPEntry entry = res.next();
prettyPrint(entry, ATTRS, ld);
status=0;
catch(LDAPReferralException e)
System.out.println(e);
continue;
catch(LDAPException e)
System.out.println(e.toString() );
continue;
LDAPAttribute atrib = new LDAPAttribute("memberOf", "CN=Tight VNC,OU=Staging Transmitter Channels,DC=marimba,DC=local");
LDAPModification mod = new LDAPModification(LDAPModification.ADD, atrib);
System.out.println(ld.isAuthenticated());
try{
// This is the code the throws the Exception DSA is unwilling to perform.
ld.modify("CN=smstest0005,CN=MarimbaComputers,CN=Computers,DC=marimba,DC=local", mod);}
catch(LDAPException e){
System.out.println(e);}
catch(LDAPException e)
System.out.println(e.toString() );
//Done, so disconnect
if((ld!=null) && (ld.isConnected()))
try
ld.disconnect();
catch(LDAPException e)
System.out.println(e.toString());
System.exit(status);
public static void prettyPrint(LDAPEntry entry, String[] attrs, LDAPConnection ld)
System.out.println("DN: " + entry.getDN());
//Use array to pick attributes. We could have
//enumerated them all user LDAPEntry.getAttributes
//but this gives us control of the display order
for(int i = 0; i < attrs.length; i++)
LDAPAttribute attr = entry.getAttribute( attrs);
if (attr == null )
System.out.println(attrs[i] + " not present");
continue;
Enumeration enumVals = attr.getStringValues();
//Enumerate on values for this attribute
boolean hasVals = false;
while ((enumVals!=null) && enumVals.hasMoreElements())
String val = (String)enumVals.nextElement();
System.out.println(attrs[i] + ": " + val);
hasVals=true;
if(!hasVals)
System.out.println(attrs[i] + " has no values");
System.out.println("----------------------");OK, I have learned a little about JNDI today and have attempted to implement this using JNDI instead.
I am now getting the OperationNotSupportedException when attempting to add an attribute to an item in Active Directory.
here's the code, can anybody who has managed to add data into AD help with this?
cheers.
package JNDI;
import javax.naming.*;
import javax.naming.directory.*;
import java.util.*;
class Getattr
public static void main(String[] args)
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY,"com.sun.jndi.ldap.LdapCtxFactory");
env.put(Context.PROVIDER_URL, "ldap://hostname:389/");
env.put(Context.SECURITY_PRINCIPAL, args[0]);
env.put(Context.SECURITY_CREDENTIALS, args[1]);
try {
// Create the initial directory context
DirContext ctx = new InitialDirContext(env);
// Ask for all attributes of the object
Attributes attrs = ctx.getAttributes("CN=smstest0005,CN=MarimbaComputers,CN=Computers,DC=marimba,DC=local");
for (NamingEnumeration ae = attrs.getAll(); ae.hasMore();)
Attribute attr = (Attribute)ae.next();
System.out.println("attribute: " + attr.getID());
/* Print each value */
for (NamingEnumeration e = attr.getAll(); e.hasMore();System.out.println("value: " + e.next()));
// Specify the changes to make
ModificationItem mod[] = new ModificationItem[1];
mod[0] = new ModificationItem(DirContext.ADD_ATTRIBUTE,
new BasicAttribute("memberOf", "CN=Tight VNC,OU=Staging Transmitter Channels,DC=marimba,DC=local"));
ctx.modifyAttributes("CN=smstest0005,CN=MarimbaComputers,CN=Computers,DC=marimba,DC=local", mod);
// Find the surname attribute ("memberOf") and print it
//System.out.println("memberOf: " + attrs.get("memberOf").get());
} catch (NamingException e) {
System.err.println("Problem getting attribute:" + e);
Maybe you are looking for
-
Hi, I've gotten everything working in our cluster except this. We have some JSP's that retrieve resources via a URL that points back to the cluster. i.e. the JSP retrieves an xml template from the server and then populat
-
my company have two internet connection ; 1 is dsl connection , firefox working fine on it ; 2 is my company's own cisco 2911 cisco router with internet connection , firefox wont loading pages except just the homepage of google.com and that's it , an
-
Okay I'm tearing my hair out here! I'm working on a Web design for a class. I'm trying to make a fixed header that is centered on the screen. The block containing the header is 950 pixels wide and should auto-center. Here's a link: http://pjutter.c
-
How to know when a diectory I am trying to copy files to is full?
My Java application archives alot of files......eventually the archive drive will sometimes get full. To deal with this problem, we have a few other drives that the archive can "spill over" into when a drive becomes full. How in Java can I detect whe
-
Cant install Archlinux with 2k12-R2 image
Hi, I have a gpt hard disk with efi boot, so I need to boot from this image, the issue is that it displays a menu, with the options, I select Archlinux, the first one, and it starts to load files and stuff, then it shut down my monitor, It looks like