HF-300 & answer/end-call key

Argh! I can't get the answer/end call key to answer or end my calls on my HF-300. I'm using a 3110 classic which is listed as a compatible phone on the front of the box.
I have tried it out with a 6300 also and I have the same problem (6300 is ALSO listed on the front of the box).
The only one I can get to work is my N95. I presure that symbian has something to do with it?
I have read that older batches of the HF-300 have had problems maintaining calls for longer than 5 minutes but no one has listed my problem.
I cannot find any specific information that states that the 3110 classic is NOT fully compatible with the functions of the HF-300.
Oh and I have already tried 4 different HF-300's to see if the first one had a fault.

I think you've pointed out the issue, the 3110 and 6300 use the S40 interface, whereas the N95 (and my 6110 Navigator) use the S60 3rd Edition interface, both of which have no problems with the HF-300. You might try and download any updates, if available, to sort out your problem.

Similar Messages

Bad finish on the keys: escape and end call 9860

Bad finish on the keys: escape and end call. Apparently the physical keys are made by different suppliers, just bought a 9860 and these keys are being disarmed, they apperar to have a sticker

Bad finish on the keys: escape and end call. Apparently the physical keys are made by different suppliers, just bought a 9860 and these keys are being disarmed, they apperar to have a sticker

Need to change call answering and making key in G900 without touchscreen

Need to change call answering and making key in G900 without touchscreen

Unfortunately this is not possible. There's no settings to change regarding this in the phone. If you would like to answer a incoming call on a hardware key you will have to use a hands free (and press the answer key on the hands free).
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

End call Answer in verizon

My friends and I are iphone 4S users throgh Verizon. None of us is able to get "End Call + Answer" (AT&T users are getting this with Red background as 3rd and last option) button when we receive another call while talking on one call. We are just getting "End Call" (in red background). First 2 options in the scenario of getting another call are same on AT&T and Verizon users' iphones.
As effect of lack of this option, we cannot end our current call and accept another. We have to take second and keep swiping between two calls, if we do not want to redial. Also, we cannot end either of call, it has to be end of both calls!!
When I went with this issue at several Verizon service centers, they were surprised with the problem, but had no other answer other than to contact apple.

Here are a couple of articles from the apple support website that might help out.
http://support.apple.com/kb/HT1737
http://support.apple.com/kb/HT1414?viewlocale=en_US

What happened to the end call and answer button

When you are on a call and someone else calls in, there used to be an option for end call adn answer. Now there is ignore, hold call and answer, end, send message and some other option, but no "end call and answer". Any help??

This seems to be GSM (AT&T) vs CDMA (Verizon) issue, not an Apple h/w or iOS issue.
Here is a link that sheds some light on it: https://discussions.apple.com/thread/2753071?start=0&tstart=0
Another link with some tips: http://forums.macrumors.com/showthread.php?t=1317331
I used to be w/ AT&T, and recently switched to Verizon for LTE+iP5, and lack of this option (end call and answer) drives me nuts. But, one learns to live with it, until someone at Verizon decided to do something about it.
Message was edited by: moemann

Iphone screen is black when I remove the phone from my ear; can't end call

This is annoying! It doesn't happen all the time -- only some of the time but at least two times a day. The phone works but it just doesn't show the "end call" option -- or anything for that matter. I can turn it off when I have my headset on but if I don't have the headset on, I have to press the lock key on the top of the phone to get it to do anything. Then it locks, and then when I touch the on button at the bottom of the phone, it shows the display again. Anyone have any ideas or should I take it in?

Hey jps42247,
Do you have a protective case on the iPhone? If its covering the Proximity sensor on the iPhone, the iPhone could think the phone is still being held up to your head. In that case the iPhone screen would remain locked so the call could not be ended accidentally.
If you don't have a case on the iPhone, try resetting or restoring the iPhone.
http://docs.info.apple.com/article.html?artnum=305743
http://docs.info.apple.com/article.html?artnum=305744
Jason

UCCE Router Call Key Reset Post Private Link Failure

Hi Guys
As above. My customer has UCCE v7.5.8 together with CVP 7.0 designed with a pair of Proggers geographically split with a 2x10Mb LES between the 2 sites supporting both the visible and private traffic (One LES for each).
The LES supporting the Private traffic 'blipped' but recovered within 10 mins. Now each day @ midnight Router Call Key starts at 201, however,whilst looking into a reporting issue I noticed that Router Call Key, seems to have reset to 201, but prepended with digits 34768, making a Router Call Key of 34768201. This appears to coincide with the time of the Private link recovery. Has anyone seen this before? I'm guessing this denotes a state-transfer/Db re-sync has taken place, or am I barking up the wrong tree?
Cheers
Freddie

Thanks Lasse,
When running that tool, all the links are showing zero utilization - not sure if the tool is able to show any more detailed information?
I should state that this Lync implementation is not live, there no Lync clients out on the corporate network, and I'm not expecting any traffic on the WAN site links at this point.
It just seems to be an issue when accessing as a remote user. At this point I think it must be because I have misconfigured CAC. And because it is happening for a conference and not peer to peer for the remote user, then it is probably the relationship
between the front end server pool and Edge server / remote user.
I have a local / central site defined in CAC with no bandwidth policy applied. Initially the subnets assigned to this central site were just the LAN subnets for the central site that I knew would have Lync clients running on them. Then as part
of troubleshooting decided to add the Edge Internal IP, and then Edge external IPs as subnets associated with this central site. Still getting the same problem though.
Its around about times like now where I wonder if it is something simple like a service needing restarting so I'll double check things like this. If you have any other ideas it would be greatly appreciated - a bit stuck.
Regards,
James

Cannot End Call on Q10 after upgrading to OS 10.2

I cannot End Call (mostly Outgoing) after upgrading to OS 10.2. The receivers phone keeps ringing even after i try to disconnect the call. The "END CALL" option is grayed out and the red led on the top left keeps blinking. This happens very frequently (mostly Outgoing calls). Any thoughts or solutions Thx

marootz wrote:
I cannot End Call (mostly Outgoing) after upgrading to OS 10.2. The receivers phone keeps ringing even after i try to disconnect the call. The "END CALL" option is grayed out and the red led on the top left keeps blinking. This happens very frequently (mostly Outgoing calls). Any thoughts or solutions Thx
From the main screen, swipe down from the top black bezel to Settings > About... what is the OS Version listed there?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Is there a way to answer Voip calls such as Bria while the phone is in locked mode?

We are using Voip Apps such as Bria and Avaya OneX portal with Voip client enabled for SIP extensions back to Avaya IP Office, the issue is that Apple will not allow the answer splash screen to pop up while the phone is in locked mode..
On a smartphone you can lock the screen (for security reasons) and to unlock you need to enter a pin or password to get access to the phone. On a native cellular call the ability to answer the call is provided on the lock screen so that the user does NOT have to unlock the phone to answer the call. What this customer/partner is complaining about is with our VoIP portion of the application when an incoming call comes in and your phone is locked you cannot answer the call until you unlock the phone.    The issue is that Apple does NOT let application developers bypass the phones locked screen. Call it security or whatever you want this is something that don’t make available. Like I mentioned other VoIP applications like Counterpath suffer from the same Operating System limitation.
So a couple things:
1.       This is not a Bug it’s an operating system limitation.
2.       If this is that key for a user the only options are to turn off the lock screen or switch to Android (which does allow this).
Totally agree with the customers complaint there just isn’t much we can do. We can try to complain to Apple again however that is not going to yield anything.
Is there any way to get around this?
Thanks,
Kelvin

I'm going to give up on Apple if they don't change this soon. It worked before, answered like a regular phone call (slide to answer). But since IOS7 i really dont like my Iphone anymore. Looking around for alternatives.

Upgrade to IOS 6.1 - all incoming calls come in as a call waiting call when there is no other call going on, and it won't let me actually answer the call.

I upgraded my AT&T iPhone 4 from IOS 6.0.1 to IOS 6.1 on Monday evening. It completed successfully overnight and everything looked good on Tuesday morning until I received my first call. When the phone rang, the screen showed the typical 'call waiting' screen, asking me if I wanted to 'End Call and Answer', 'Ignore Call', or 'Hold Call and Answer'. Using any of the selections still does not allow the call to be answered. It takes a hard reboot to clear the call.
If I make an outgoing call, the phone hangs on the 'End Call' portion. It shows the button being pressed and that it is ending the call, but it doesn't ever end. It also takes a hard reboot to clear the call.
So, I have tried hard reboots of the phone, without any success. Last night, I tried to reset the phone to factory settings and restored my phone content from iTunes. Unfortunately, I still was having the issue. I have also tried restoring the Network Settings, and that did not work as well.
Has anyone seen any similar behavior and have any advice?
Thanks

A brief and probably non-helpful answer: I know of no way to eliminate your large amount of duplicates other than by repetitive, tedious manual effort.
*There has got to be a simpler way.*
I hope you're right, but I don't think there is a simpler way.
BACKUP: It also appears that the only way I can back up the catalog is to shut down LR. Really?!
Yes, really

Feature request: Ability to set the Home button to answer incoming calls

Rather than have to manipulate the slider to answer a call, it would be easier (and safer in many cases) to be able to click the Home button to answer a call. That could be implemented as an option on Settings/General/Home. Has this been requested?

it is hard for us to know, since we are end users just like you. We do not work for Apple, and Apple does not monitor these threads to answer individuals.
You may provide feedback to Apple for any enhancements you would like to see implemented at http://www.apple.com/feedback/iphone.html

When in phone mode black screen and no option to "end call" power dwn req

ok so heres my problem after i updated to 4.0.2 now when i use the "phone" to make recieve call screen goes blank and i loose the option to "end call" then to get outta call i have to press power button and home button to reset i hav already went to itunes and rebooted my phone hoping that would fix it but nope its still jacked up anyone can help?? any ideas

in phone mode, I face the same problem. I call and then I have to enter a series of numbers to make an international call, but the screen goes blank completely
This is little bit weird. I am using iphone 3gs; works with other functions, but for the phone. The phone becomes completely useless after I make any call.
Good that it is still in the 30 day trial period; plan to return it.

IPhone not hanging up on "End Call"

This occurs frequently, about 1 out of every 5 calls I make. When I hit the red "End Call," at the conclusion of a conversation, my phone hangs with it reading, "call ending..." It does not ever read the normal "call ended" and will stay that way until the screen dims. I then have to reboot the iPhone and everything works normally on the iPhone until it happens again within a few phone calls.
I am running 1.1.1 (3A109a) and have done nothing peculiar to the iphone. (No 3rd-party apps or jailbreak.)
Just wondering if anyone else is experiencing this…thanks.
Message was edited by: JKosh

First thing that you should do is update to 1.1.2. Apple fixed many bugs like that in that patch. Normally its something to do with the call line itself, like if you're phoning a Verizon person or a T-moble machine.
Do you end the call or does the other person end the call? Try having the other person end the call and see what happens. Also, ask who their provider is and if that doesn't help call AT&T and see what they say.

Iphone 5 doesn't end call and Siri problems. Need help.

I can barely open my screen before it closes and when I hit end call--it doesn't. The screen kicks off and goes black--anyone else experiencing this?
Plus, Siri is acting up and doesn't get the question and the screen goes blank quickly.
I was switched out for a new phone after all the other issues relating to lack of signal and battery drainage. So, I now have a new phone with a complete new install and now this. I have rebooted to the apple screen--nothing seems to be working to solve this.

First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
If that doesn't help make an appointment at an App,e Store to have your iPhone looked at by a service technician.

Ios5.0.1, can't receive calls, can't end call, can't take video!!!!!

After installed ios5.0.1, can't receive calls, can't end call, can't take video!! The screen become frozen! Any help please? Thx!

How about going to a corporate store and see if they will let you put your SIM card in a display model. Your number will transfer over with the SIM card. Then if you call your number from your wife's phone or one of store landline phones and the call goes through, you have ruled out the SIM card being the problem.
You don't have the phone number set to automatically forward to the voicemail, do you?

HF-300 & answer/end-call key

Similar Messages

Maybe you are looking for