HFM application not visible from work-space
Hello,
We have a requirement where Essbase 11.1.1.3 is being installed on a separate machine but it will use our existing Shared service.
We managed to install and configure Essbase successfully but while logging into the EAS console we got error saying that incorrect password, the issue seemed to be of Shared service.
Then we restarted all the services including Shared service, there after we are not able to see HFM application on workspace.
One thing that we noted is that the guy who installed and configured Essbase selected "Perform 1st-time configuration of Shared Services database " even though we want to use existing Shared service schema.
So do you think that selecting "Perform 1st-time configuration of Shared Services database" option might have caused HFM application not to be visible in the workspace.
And if your answer is YES then apart from restoring SS schema from backup, is there any other way of fixing this ?
Regards,
Rajnish Singh
In workspace, you can re-register the application with shared services.
Go to administer -> Classic application administration, consolidation administration, register application.
Nick
Similar Messages
-
Web Analysis reports charts are not visible in work space
Hi All,
I have created couple of reports in web analysis 11.1.1.3 with charts embeeded in that reports and when i open the same report in the workspace iam not able to see the chart.
If any one have faced this issue give me an idea .
Following are the logs
<event logger="com.hyperion.analyzer.utils.chart.a" timestamp="1257795266678" level="ERROR" thread="TP-Processor3" sequence_no="13">
<time>09 Nov 2009 12:34:26,678</time>
<context originator_type="WebAnalysis"/>
<message><![CDATA[
No X11 DISPLAY variable was set, but this program performed an operation which requires it.]]></message>
</event>
<event logger="com.hyperion.analyzer.utils.chart.a" timestamp="1257795329303" level="ERROR" thread="TP-Processor3" sequence_no="14">
<time>09 Nov 2009 12:35:29,303</time>
<context originator_type="WebAnalysis"/>
<message><![CDATA[
No X11 DISPLAY variable was set, but this program performed an operation which requires it.]]></message>
</event>
<event logger="com.hyperion.analyzer.utils.chart.a" timestamp="1257795332502" level="ERROR" thread="TP-Processor3" sequence_no="15">
<time>09 Nov 2009 12:35:32,502</time>
<context originator_type="WebAnalysis"/>
<message><![CDATA[
No X11 DISPLAY variable was set, but this program performed an operation which requires it.]]></message>
</event>
<event logger="com.hyperion.analyzer.utils.chart.a" timestamp="1257795337055" level="ERROR" thread="TP-Processor3" sequence_no="16">
<time>09 Nov 2009 12:35:37,055</time>
<context originator_type="WebAnalysis"/>
<message><![CDATA[
No X11 DISPLAY variable was set, but this program performed an operation which requires it.]]></message>
</event>
Thanks,
RamI using local deployment. I deploy my application directly from NWDS to a Mobile Client running also locally in my machine. Maybe I'm wrong, but I think that Mobile Client look for resources in NWDS workspace.
This is the dpi file located in the Mobile Client inbox folder when I perform the deployment.
<?xml version="1.0" encoding="UTF-8"?>
<deployment>
<device>
<repository>
<mcd name="IrviaDemoApp" namespace="" version="1">
<action type="install"/>
<location type="local">
<source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\MOBILE-INF\MCD.xml" property="mcd" type="file"/>
<component name="hpcds.es~irvia_demo_app">
<applications>
<application deploy="true" name="IrviaDemoApp"/>
</applications>
<source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\bin" property="bin" type="dir"/>
<source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\gen_wdp" property="gen_wdp" type="dir"/>
<source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\src\mimes" property="mimes" type="dir"/>
<source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\gen_wdp\application-j2ee-engine.xml" property="j2ee_xml" type="file"/>
</component>
</location>
</mcd>
</repository>
</device>
</deployment>
There is a <source> entry for the mimes directory, where "Component images" are located.
PD: Sorry about my poor english. I hope you to understand me. -
Not getting planning Applications when Log on Work space
Hi Dear Experts,
when log on Workspace to access Planning:
its show showing
Navigate ->Administration->User management
instead if Select Navigate > Applications > Planning
and iam not getting planning Applications when Log on Work space
I have Just Installed Essbase and Planning into my machine .. and i have opened work space area and
and i tried to create first application by using the following URL
http://localhost:8300/HyperionPlanning/AppWizard.jsp
iam getting not able create first application..
can you please guide me how can i work with planing applications..
thanks in advance
KishoreHi Kishore.
From config utility, did you create an instance before trying to access.
I mean "product instance registration" and "data source configuration"
You can find it in the installation doc
Sandeep Reddy Enti
HCC
http://analytiks.blogspot.com -
Actual and Forecast not visible from Planning App -- VERY CRITICAL ISSUE ,
this is a very critical issue.. need immediate help..
my customer cannot see the Actual and Forecast not visible from Planning App. please help me with the same. tell me the possible solns as i cudnt have a web confrerence with the custmer till now.
thanks/John ,
they are seeing the application in planning. they created a scenario dimension containing , budget, actual and forecast.. but in the planing application they can only see budget. the rest 2 are not visible.
thanks.. -
HT204266 my you tube application not visible
you tube application not visible in my device
What version of the software do you have? iOS 5? iOS 6?
Check by opening Settings app. The navigate to General > About. It will tell you the software verison.
In iOS 5, restrictions could cause YouTube from not appearing any where in the home screen.
See: iOS: Understanding Restrictions
In iOS 6, it's normal because YouTube is no longer part of iOS. You'll need to go to the App Store and download it.
See: YouTube for iOS -
Mail send from iPhone not visible from Macbook
Any mail I sent from my iPhone (latest OS) is not visible from my Macbook Pro (latest OS) in the sent box.
I need this to be fixed. How? I have read through the forums and there seems to be no fix to this. And yes, I have everything configured properly (ie. to keep sent messages on server, etc).
Any help to fix this would be appreciated as I need to access all my emails for work from my computer.Please ignore the above . I have discovered what I did wrong - but don't know how to delete the question!
Sorry -
TS1702 my you tube application not visible
you tube application not visible in my device
If you can't find it on any of your homescreens or app folders, and you can't find it via the spotlight search screen (swipe your first home screen to the right), then is it hidden by Settings > General > Restrictions > YouTube being set 'off' ?
If not then have you tried a reset to see if you can find it after the iPhone has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot. -
Hi Gurus,
Recently upgraded HFM system in distributed environment from version 11.1.2.1 to 11.1.2.2 on MS Win 2008 R2 platform and Oracle 11g database. There are two servers as follows:
Machine 1: Foundation
Reporting
Workspace
HFM Web
Machine 2: Foundation common components
HFM
FDM
Applied maintenance release, configured existing databases for individual components and deployed to application server on existing domain (on Machine 1 WebLogic) which went fine. Lastly configured web server on Foundation (Machine 1 - Oracle HTTP). Then executed the HFM schema upgrade utility.
Workspace & shared services are working fine, HFM apps are appearing in shared services, hfm text appears using hfm url, services are running fine. Issue is that HFM applications do not show up on workspace.
Oracle support suggested applying adf patches, HFM 303 & 305 patches, but the problem remains even after applying all the suggested patches. Is this a bug in 11.1.2.2? Please help.
Thanks,
HamminderHi Hamm,
The fact that you are saying that "hfm text appears using hfm url" can mean that you have not configured the workspace web server after you configured the HFM. Have you done that?
As another test, have you tried toy connect to HFM via smartview to an existing app?
Regards,
Thanos -
Profile description is not visible from Application which the LDT file has.
Experts,
I am running into strange issue.
Dev created a LDT file for a profile and requested to upload it through a one-off patch.
The profile got updated into the DB for all the 3 languages - US, KO and AR.
However the description is not visible for US when tried to verify from the Forms.
Further analysis gave a tip that the description is NULL only for US and exists for other 2 Langs (KO and AR).
SQL> select PROFILE_OPTION_NAME, DESCRIPTION, LANGUAGE, LAST_UPDATE_DATE, LAST_UPDATED_BY, CREATED_BY, CREATION_DATE
2 from fnd_profile_options_tl where
3 profile_option_name='INL_ITEM_CATEGORY_SET';
PROFILE_OPTION_NAME DESCRIPTION LA LAST_UPDAT LAST_UPDATED_BY CREATED_BY CREATION_D
INL_ITEM_CATEGORY_SET {Category Set to determine the items that will be AR 09-NOV-12 122 122 11-JUL-11
LCM trackedسÙÙ
اÙ
٠سÙÙ
اÙ
٠سÙÙ
اÙ
٠سÙ}
INL_ITEM_CATEGORY_SET {Category Set to determine the items that will be KO 09-NOV-12 122 122 11-JUL-11
LCM trackedâ
¦'+++ '+++ '+++ '+++ '+++ '+++ '+++ '++
+Ã
INL_ITEM_CATEGORY_SET US 12-MAR-12 *2330* 122 11-JUL-11
SQL>
Also identified the Last Updated By is from FND User - "PROCESS_OPS"
SQL> select USER_ID, USER_NAME from fnd_user where USER_ID in (122, 2330);
USER_ID USER_NAME
122 ORACLE12.2.0
2330 PROCESS_OPS
SQL>
What could be the reason behind this change?
Why the profile description only for US Lang is not getting updated whereas for other languages it got updated by FND User - "ORACLE12.2.0"?
It clearly shows on 09-Nov-12 there were some changes happened and that to by User_ID 122 which updated for KO and AR.
For some reason the same was not applied for US Lang.HI Hussein,
I am waiting for your update only.
We have requested Dev to chek the same got to know that,Yes, when tried with CUSTOM_MODE=FORCE, it is working fine.
But they are insisting on how the other Langs got updated and why it would not update for US alone.
Just check the Profile from FND_PROFILE_OPTIONS about the profile details and found below.
SQL> select APPLICATION_ID, PROFILE_OPTION_ID, LAST_UPDATE_DATE, LAST_UPDATED_BY, CREATION_DATE, CREATED_BY
2 from fnd_profile_options where PROFILE_OPTION_NAME='INL_ITEM_CATEGORY_SET';
APPLICATION_ID PROFILE_OPTION_ID LAST_UPDATE_DATE LAST_UPDATED_BY
CREATION_DATE CREATED_BY
9004 1011555 12-MAR-12 2330
11-JUL-11 122
SQL>
For some reason the TL got lastupdate_date and 09-NOV-12 and the same is not reflecting in FND_PROFILE_OPTIONS.
Please advise. -
NIDaq Windows application not visible in new project
Hi Everyone,
I am trying to build a VB.NET WPF application using Measurement Studio 2013 for Visual Studio 2012.
I followed the walktrough Creating a measurement studio NIDAQmx application, but I get stuck at the point of creating the project as Visual studio does not offer me the possibility to create an NIDaq Windows application.
I have DAQmx9.8 installed for LabVIEW, I downloaded NI device Drivers 2014 feb, but still the same.
When I installed Measurement Studio, it could not find the Device Drivers, and even after downloading them and trying to install them afterwards trought the installer of measurement studio, it cannot find them.
Daqmx support for .NET 4.5 seems to be installed too, although it is not visible in the list of installed softare.
Thanks for your help,
Best Regards,
Attachments:
WPF_Daqmx.PNG 51 KB
installedSoftware.PNG 21 KBHi Matt,
Thanks for your answer, I did a custom install and I installed .NET framework support 4 & 4.5, but I did not install Microsoft Visual Basic 6.0 support, is this mandatory?
Although it is working now on some of my configurations at least.
I have 3 machines on which I have made the attempt, with the following configurations:
A: x86 desktop:
-Windows 7
-LabVIEW installed, NI-Device drivers Feb 2014 and NI-DAQmx 9.8.0 (previously installed, for labview)
-Visual Studio 2010, 2012, 2013
-Measurement Studio 2013 for Visual Studio 2010, 2012
=> NI DAQ project and NI DAQ assistant available in both visual studio 2010 & 2012
B: x86 desktop:
-Windows 7
-NI-Device drivers Feb 2014
-Visual Studio 2010
-Measurement Studio 2013 for Visual Studio 2010
=> NI DAQ project and NI DAQ assistant available in visual studio 2010
C: x64 laptop:
-Windows 7
-LabVIEW installed and NI-DAQmx 9.8.0 ( NI Devices Drivers feb 2014, but Ni-Daqmx 9.8.0 was installed before as I am usually working with labview)
-Visual Studio 2010, 2012, 2013
-Measurement Studio 2013 for Visual Studio 2010, 2012
=> NI DAQ project and NI DAQ assistant available only within visual studio 2010 not 2012....
I would like the laptop to work under 2012 too, as it is the machine I use most of the time.
Does the order of installation impact on visual studio integration?
Should I reinstall everything on the laptop from the begining? In which order?
It seems that NI-DAQmx 9.8.0 even with .NET support 4&4.5 is not enough, and it is mandatory to install NI Device Drivers Feb 2014, Is that correct? If yes, why?
Now the most important for me is the ability to check if the signal outputs are generated correctly on the simulated device, thus being able to see traces with NI IO trace, and none of these configurations, using both NI DAQ example or a project generated with the daq assistant, shows anything in NI IO trace.
I have posted related threads on ni.forums.
http://forums.ni.com/t5/Measurement-Studio-for-NET/Web-publishing-daq-application/m-p/2830642
http://forums.ni.com/t5/Measurement-Studio-for-NET/WriteDigitalChannel-example-nothing-in-NI-IO-trac...
Thanks for your help,
Best Regards, -
Webdynpro application not functioning from Apache Reverse Proxy
Hi Experts,
We are currently working on custom webdynpro application, which needs to be exposed to Internet. We are using Apache HTTP Server as a reverse proxy.
We canable to access URL, but no images are getting displayed and also the application not functioning when we click any button/links.
Below is the HTTPD file configuration.
ProxyPass /esampleApp http://hostname:port/webdynpro/dispatcher/local/esampUI/ESamplingApp
ProxyPassReverse /esampleApp http://hostname:port/webdynpro/dispatcher/local/esampUI/ESamplingApp
When we look into image URL, which is being called from Apache, we found out "webdynpro" is missing in the URL.
Actual URL in Portal Server: (working)
http://portalhostname:port/webdynpro/resources/local/esampUI/Components/esampling.ui.ESamplingComp/logo.gif
Apache URL:
http://Apachehostname:port/resources/local/esampUI/Components/esampling.ui.ESamplingComp/logo.gif
Please suggest.
Thanks
AravindWe also had the same issue, but the problem was that instead of http https was getting called.
This has to do with 2 settings:
1. Check the reverse proxy re-write URL's again. Note that there will be 2-3 entries one for webdynpro as well.
2. Open your system definintion in system admin-sys configuration adn check the WAS settings. this should point to the FQDN of the proxy server and not to the R3 server.
ankur -
Applications not visible in finder
I loaded Mountian Lion on to my Macbook Pro and now my applications subfolder is not visible in Finder? I can't seem to find it anywhere? Any ideas where it went to?
Thanks!Your Applications folder should be in Macintosh HD/Applications.
Not sure what you mean by a sub-folder?
Can you launch your apps from the Dock? -
Error "Application not found" from SICF while trying to test WD service
Hi All,
I am getting an error as "Application not found" when i am trying to test my web dynpro component service from SICF.
This service is active as well.
But when i copied the same URL and pasted it in browser then my web dynpro component opened.
And i am able to open my web dynpro compoent from SE80 also.
Regards,
AmarHi All,
Is is related to browser, because i am using IE8.
But the only doubt i have is when i am pasting the URL in IE8 then it is loading the WD page.
Regards,
Amar -
Application not visible in PDA after server deployment
Hi All,
I developed an Mi 7.1 application.Deployed all the sdas in the Mi server using sdoe_upload_archive.I created a device.Assigned all the mobile components to the device .I synchronized the device and it is successful.
I can see the service and mobile ui component in the mobileapps folder of the device.
But I am not able to see the application in the application launcher of the PDA.
Any clues in resolving this?
Thanks and regards,
Rajesh.AHi Rajesh,
The application link may not be visible for the below given reason. Check whether it solves your issue :
Reason 1. If the role SAP_DOE_ALL_APP_VISIBLE is missing for the user on the DOE system, then the application link is not visible on the home page.
Solution 1. Add the role via agents in the NWM portal.You should also perform a delta download for the following data objects in the SAP BASIS 7.10 software component version (SWCV):
1. USERDETAILS
2. USER_AUTHORIZATION
Reason 2. The application link is not visible because of the user authorization issue. Check whether the SAP BASIS 7.10 software component version is assigned to the device or not.
If the SAP BASIS 7.10 software component version is not assigned to the device, then follow either of the steps specified below (2a or 2b):
Solution 2a. Disable the authorization check on the mobile client
(For PDAs)
This can be done by creating a configuration.properties file in the \MI\Settings\ folder with the entry com.sap.tc.mobile.cfs.deploy.check_authorizations=false. Stop and start the client. The file is consumed, the authorization check is disabled, and then the application is visible in the application launcher.
Solution 2b. Assign the authorization-related SWCV to the device (in the NWM portal)
In the NWM portal, go to the DMSWCV tab in Device Management. Manually assign the SWCV containing the authorization data objects (SAP BASIS 7.10). Trigger an extract. Synchronize the device. The authorization objects are now available on the device. The application appears in the application launcher.
Reason 3. If the installed client version and the NWMCLIENT.SCA version uploaded in the DOE are different, even then the application link is not visible on the home page.
Solution 3. Upload the NWMCLIENT.SCA (same version of the client) to the DOE using transaction SDOE_UPLOAD_ARCHIVE.
Regards,
Suma -
Application not visible in 9.3.1
hi All,
I have successfully created a database(ms-sql) and configured it.on top of it i have created an application successfully.but when i try to login that app thru planning web or workspace its not visible there.can anyone tell me what is the cause for this.
thanks in advanceIf you are going direct to planning and not seeing the app in the dropdown then it may be down to having created multiple instances in the config utility, if that is the case you will need to associate the datasource with the active instance - http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_hp_admin/ch02s10s04.html
Cheers
John
http://john-goodwin.blogspot.com/
Maybe you are looking for
-
Conflict between socket and RMI
Hi I wrote a program in client-server using socket and it was fine. I also wrote a client-server program using RMI. Fine as well. But after I connected the client-server using socket (open socket, send-receive messages, close socket), then use RMI. I
-
Single Quote Escaping in ColdFusion 8
Recently we've begun migrating some sites to ColdFusion 8 from earlier versions of ColdFusion. We've found the following quirk when inserting data into an SQL database. <cfset value = "Two single quotes '' and one single quote ' in the same line does
-
When I save a file in PhotoShop or other Adobe products the time of the file is not in sync with my computer clock - it is 7 hours early. How do I reset the clock in Adobe? All other programs i.e.Word etc. are the correct time. Thanks
-
Get image error importing to Adobe edge
I get "Error loading image" when importing .png or .jpg into Adobe edge
-
Is this a bug? Invisible file on timeline?
I have a file laid out on the timeline and another file next to it. However, the first file cuts to this other file then cuts back to itself with nothing above or below it on the timeline. It's like there's a file that is invisible and can't be moved