HFM Client 11.1.1.3 is supported with Windows 7 64 bit OS??

Hi,
Currently we are using HFM 11.1.1.3 version. Our company is upgrading all the Systems to Windows 7 machines. And would like to check whether it is supported with Windows 7 are not.
Ex. HFM Client, Hyperion Reporting Studio, Smartview etc. Do I need to install patches, if any. Let me know. Thanks.

Yes! HFM version 11.1.1.3 is supported by Windows 7 64 bit OS
Find the below Exceptions and Additional Information:
"1. 1.6 GHz minimum processor is required.
2. EXCEPTION: Firefox is not supported for: Data Relationship Management (Web Publishing), FDM, or Interactive Reporting.
3. EXCEPTION: Integration Services console only supports 32-bit binaries for x86-64.
4. EXCEPTION: Windows x86-64 is not supported for Data Integration Management or Financial Management Console.
5. Internet Explorer 8 and Windows 7 are supported for: Shared Services, Performance Management Architect, Calculation Manager, Smart View (with patch 9779433), Administration Services Web UI (Administration Services Console is not supported), Planning, Financial Management (with patch 9976978 when on Windows 7), EPM Workspace (with patch 9314073), Financial Reporting (with patch 9657652), Interactive Reporting, Web Analysis, Data Relationship Management, FDM, ERP Integrator."
Refer the below link for more information:
Supported Platforms Matrices - Oracle Enterprise Performance Management System</title><meta name="Title&qu…

Similar Messages

Is HFM Client 11.1.1.3 is supported with Windows 7 64 bit OS??

Hi,
Currently we are using HFM 11.1.1.3 version. Our company is upgrading all the Systems to Windows 7 machines. And would like to check whether it is supported with Windows 7 are not.
Ex. HFM Client, Hyperion Reporting Studio, Smartview etc. Do I need to install patches, if any. Let me know. Thanks.

Hello,
Following is taken from the support matrix --
Version Supported
Processor Type
OS Version
OS
32/64 bit
Exceptions and Additional Information
11.1.1.3
Intel / AMD x86-64
Microsoft Windows
Windows 7
1. 1.6 GHz minimum processor is required.
2. EXCEPTION: Firefox is not supported for: Data Relationship Management (Web Publishing), FDM, or Interactive Reporting.
3. EXCEPTION: Integration Services console only supports 32-bit binaries for x86-64.
4. EXCEPTION: Windows x86-64 is not supported for Data Integration Management or Financial Management Console.
5. Internet Explorer 8 and Windows 7 are supported for: Shared Services, Performance Management Architect, Calculation Manager, Smart View (with patch 9779433), Administration Services Web UI (Administration Services Console is not supported), Planning, Financial Management (with patch 9976978 when on Windows 7), EPM Workspace (with patch 9314073), Financial Reporting (with patch 9657652), Interactive Reporting, Web Analysis, Data Relationship Management, FDM, ERP Integrator.
See if that helps,
Thanks,
hyperionEPM
Please mark answers as helpful or correct for others to find them easily.

How much RAM can my Pavilion DV6 support with Windows 7 64 bit?

I currently have 8GB RAM and hoping to upgrade to 32GB but it looks as if I can only have 16GB?

I am also looking to upgrade my RAM from 6GB to 16GB. I had trouble navigating the support website so do you know the maximum capacity for the hp entertainment notebook pavilion dv6100 CTO Quad Core? Thanks.

How do I re-enable client security solution on my Thinkpad W700 running Windows 7 64 bit

How do I re-enable client security solution on my Thinkpad W700 running Windows 7 64 bit? It no longer brings up the "password manager". Thanks

Patterns:
Password Manager is part of the CSS package which you can download the W7 64 bit version from here:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-73785
Hope that helps

Does OBIEE supports only windows 7 64 bit?

Oracle My support is not available for OBIEE installed in windows 7 32 bit OS. Does OBIEE supports only windows 7 64 bit?
Guys please guide me?

i ahve isntalled it on 32 bit Os windows 7, but the problem is while configuring (last step of installation) got few errors unable to rectify it. hence continued by skipping those error. but finally after deploying rpd file into weblogic server, unable to start those 5 BI components.

Quicktime support for Windows Vista 64 bit OS

Are there plans to support the Windows Vista 64 bit operationg system?

Yes, I also got the instruction from the installer to "use the 64-bit installer", but there doesn't seem to be one. APPLE - ARE YOU LISTENING HERE? Strange that your installer gives seemingly impossible instruction.

HP LaserJet 5000 support in Windows 7 64-bit

I recently purchased a Dell Laptop that has MS Windows 7 64-bit OS and I have an old Dell Desktop 4400 w/Windows XP I have a HP Laserjet 5000 printer connected to the LPT1 Port. I have the printer shared and I can connect to it with my other laptop that has the MS Vista OS. I can not get my Laptop that has Windows 7 to connect to it and I have tried everything that I can think of. I logged on to my Laptop with Windows 7 and downloaded the latest driver from the HP Web Site. The drivers for the LJ5000 are called Universal Drivers. The drivers are installed on my W7 System and then I go to the Start/Devices and Printers and "Add a Printer" option. I select the "look in the network option" and Windows looks for the Shared Prnter and finds it. I select the printer and it starts looking for the driver. I think it looking on the computer where the printer is connect to anyway, it cannot find the driver. I get a dialog box that says it can not find and gives me the option to browse. I then browse to the Universal Driver that I downloaded for HP5000 and I go the folder that has the ".inf" files. The program tells me that it can not find the driver for HP5000. What am I doing wrong? Does Windows 7 support the HP Laserjet 5000 printer. I sure hope so because I can afford to buy a new 11"x17" printer. Can anybody out there help me? Thanks.
This question was solved.
View Solution.

Try the following: on the Windows 7 machine go to the Devices and Printers folder, Add a Printer, Local Printer, Create a Port, Local Port, \\Computername\Printername (use the actual share name for the computer and printer), OK, then click on Windows Update and then select the appropriate driver.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

SL-510 - TYPE 2847-BWG memory support 8GB dual , With windows 7 64-bit

hello all
i am new on this site and i want to ask about my lenovo thinkpad SL-510 TYPE 2847-BWG .
i have read Detailed specifications in the site of lenovo about my laptop model ( i attch the link )
http://support.lenovo.com/en_US/product-and-parts/detail.page?DocID=PD004286
and see that my laptop model support up to 8GB maximum memory with Dual-channel capable
so i want to know please if i need only 2 stick of memory example 2x4GB that must be the same to
be work on dual Together if i want my laptop have the max 8gb memory ?
and my second question if this two models of memory sticks support with my laptop
the first model of memory is :
Corsair 8GB (2 x 4GB) DDR3 SODIMM Memory (CMSO8GX3M2A1333C9)
http://www.corsair.com/en-us/cmso8gx3m2a1333c9
and the second model is :
Samsung 8GB (2x4 GB) SO-DIMM PC3-10600S (m471b5273dho-ch9)
I want to note that I have an operating system
Win7 home Premium 64-bit
i would very appreciate to all of you And thank you in advance for answers
i hope you can help me with this .

Yes, a matched pair (2x4GB) is correct for 8GB dual channel.
I have had good luck with Samsung, and I think
Corsair website has a tool to choose correct memory for you model,
as do Crucial, Kingston, and others.

Are Crystal 9 and Crystal 10 supported with Windows 7?

I have Crystal 9 installed for Peoplesoft report development and Crystal 10 installed for Kronos report development. We are moving to Windows 7 and I am doing testing of all our applications and third party tools now. What I am finding is that both versions will install without error but I cannot connect the ODBC DataDirect drivers and no other drivers will work. So If I cannot connect to our Oracle database then I am wondering if these version are in fact supported on Windows 7? Can someone please respond/explain?

Hello,
Both versions of Crystal Reports are not supported on Windows 7. But I believe Peoplesoft have their own ODBC driver so you'll have to check with them if they support those versions. Our original DataDirect driver would not be supported on Windows 7.
And I don't believe the current 5.3 version are supported in CR 9 and 10.
PeopleSoft should be able to confirm if their OEM build of CR 9 and 10 are supported or even tested on that OS.
Should also mention only version is CR 2008 Service Pack 2, CR XI R2 SP6 is also but it's end of escalation life cycle now, meaning no more patches will be created.
Thank you
Don
Edited by: Don Williams on Sep 30, 2010 1:24 PM

Hyperion 11.1.3 supported environment - Windows 2003 64-bit

We are planning our migration from Windows 2003 SP1 32 bit with Hyperion 9.3.1 to Windows 2003 64bit (and whatever SP is supported) with Hyperion 11.1.3
In reviewing the oracle support doc I came across exceptions for using Windows 64 bit with 11
1. NOT SUPPORTED FOR: Data Integration Management, Production Reporting Teradata Engine.
2. EXCEPTION: Data Relationship Management and FDM do not support Oracle Access Manager, Oracle Application Server Single Sign-On, and Oracle Identity Manager.
3. 32-BIT BINARIES ONLY FOR: Data Relationship Management, EPM Workspace Services, FDM, Financial Reporting Services, Interactive Reporting Services, Shared Services (embedded Native Directory OpenLDAP service), Smart Search, and Strategic Finance.
4. FDM and Strategic Finance cannot be deployed on the same computer where Financial Management (64-bit) and Performance Management Architect (64-bit) are deployed.
I am more concerned with #3. Does this mean that those services cannot run on the 64bit machine OR that they can run on 64bit but in 32bit mode only
JTS

Hi,
It means they are only 32bit binaries but they do work on a 64bit environment.
Cheers
John
http://john-goodwin.blogspot.com/

ECC 6.0 and Sol Man 7.0 support on Windows Server 32 bit OS

Dear Experts,
I have read that SAP is moving towards 64 bit implementation.
I have to install ECC 6.0 and Solution Manager 7.0 on a Windows Server. We have yet to purchase the hardware and to decide the hardware config I need answers to the following.
Is ECC 6.0 and Solution Manager 7.0 supported on Windows 2003 server 32 bit OS?
Should I buy 64 bit hardware for both or should I go for 32 bit hardware?
Thanks and Regards,
Shailendra

> No Need to buy 64bit hardware.
You're aware that successor releases are only available on 64bit? And also the fact, that certain functionality may not work in Solution Manager (e. g. activation of BI cubes etc.)? If he wants to go for EHP4 on ERP he needs to install EHP3 first and then EHP4 using SAINT - which needs a lot of downtime.
SAP recommends using only 64bit system and I can just HIGHLY support that:
Note 931024 - FAQ: 64-bit platforms for Windows
<...>
As of basis release 6.20 productive use of 32-bit platforms is not recommended.
<...>
and
Note 1280759 - SAP recommends only 64-Bit Windows for SAP Appl. Servers
<...>
Therefore, we recommend that you only use 64-bit for your SAP system. Use Windows 64-bit also on small test and demo systems to become familiar with it. Otherwise you will end up wasting a lot of time and money optimizing your ABAP or Java application servers to run on 32-bit.
<...>
Almost all servers produced in the last two years are 64bit capable - so I'd check if the server really doesn't support a 64bit OS.
Markus

ACS 4.1 support with Windows Server 2012 Domain controller

I am upgrading my Domain Controller / Active Directory from Windows Server 2003 to Windows Server 2012.
In my environment, I am using Cisco ACS 4.1 which is integrated with Windows Server 2003 Active Directory.
Will ACS4.1 will work fine with my new domain controller (Windows server 2012) or I need to upgrade my ACS too?
Regards,
Junaid

Junaid,
ACS 4.x code doesn't even support Windows 2008 R2. Your best bet is to migrate the ACS from 4.x to ACS 5.4 Patch 2 or stay with windows 2003 or 2008 (Non-R2).
ACS 5.4 patch 2 supports Windows 2012 AD.
http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_control_system/5-4/release/notes/acs_54_rn.html
Regards,
Jatin
**Do rate helpful posts**

Exchange 2007 RTM support with Windows Server 2012 R2 Domain Controller

Hi All,
I have not found any TechNet Article which states about the Windows Server 2012 R2 Active Directory domain controller operating system support with Exchange 2007 RTM, can some one please let me know that does Exchange 2007 RTM supports Windows Server 2012
R2 domain controller operating system, we are in the process of upgrading the domain controllers to 2012 R2 but not the forest and domain functional level to 2012 R2.
thanks
If answer is helpful, please hit the green arrow on the left, or mark as answer. Salahuddin | Blogs:http://salahuddinkhatri.wordpress.com | MCITP Microsoft Lync

There are several likely reasons for this. The most significant is that Exchange 2007 RTM is no longer supported (outside ot extended support, which is not going to include adding support for new operating systems):
http://support2.microsoft.com/lifecycle/default.aspx?LN=en-us&p1=10926
You'll note from the following -
http://technet.microsoft.com/library/ff728623(v=exchg.150).aspx - that only Exchange 2007 SP3 is currently supported in any environment.
HTH ...

HFM Client (11.1.2.0.0) Installation Error Windows 7

Recieved error after running the installTool.cmd in the Foundation11121 folder. It said that it could not find Z:\Foundation11121\\jre\winAMD64\1.6.0\bin\java
The "\\" after Foundation11121 is what the error says, not a typo.
Client install works on Windows XP, but not on Windows 7.

Idr,
Thanks for the suggestion. It allowed the install to get a bit further. Here is the log from the command prompt that started with the install. Looks like we're getting Failures relating to 32-bit system.
Installer Path check... Ok
Checking if the file exist and have read permissions: Y:\Foundation11121\assembl
ies... Ok
Checking if the file exist and have read permissions: 'help' or 'help.zip'... Ok
The folder 'help' or file 'help.zip' have to exist for successfull installat
ion.
Checking if the file exist and have read permissions: Y:\Foundation11121\jre...
Ok
Checking if the file exist and have read permissions: Y:\Foundation11121\setup.j
ar... Ok
Check assemblies:
Y:\Foundation11121\assemblies\biplus_product_reporting_client... Not exists
Y:\Foundation11121\assemblies\webLogicCommonComponent\11.1.2.0\assembly.dat.
.. Failed!
Assembly for win32 platform is used
Y:\Foundation11121\assemblies\ocm\11.1.2.0\assembly.dat... Ok
Y:\Foundation11121\assemblies\biplus_interactive_reporting_services... Not e
xists
Y:\Foundation11121\assemblies\tools\11.1.2.0\assembly.dat... Ok
Y:\Foundation11121\assemblies\hpm... Not exists
Y:\Foundation11121\assemblies\biplus_financial_reporting_webapp\11.1.2.0\ass
embly.dat... Ok
Y:\Foundation11121\assemblies\ohs\11.1.2.0\assembly.dat... Failed!
Assembly for win32 platform is used
Y:\Foundation11121\assemblies\hfm_client\11.1.2.0\assembly.dat... Ok
Y:\Foundation11121\assemblies\biplus_migration_utility\11.1.2.0\assembly.dat
... Ok
Y:\Foundation11121\assemblies\biplus_dds... Not exists
Y:\Foundation11121\assemblies\analytic_services_provider_webapp... Not exist
s
Y:\Foundation11121\assemblies\hfm_common\11.1.2.0\assembly.dat... Ok
Y:\Foundation11121\assemblies\essbase_administration_services_client... Not
exists
Y:\Foundation11121\assemblies\biplus_product_reporting_services... Not exist
s
Y:\Foundation11121\assemblies\planning... Not exists
Y:\Foundation11121\assemblies\disclosure... Not exists
Y:\Foundation11121\assemblies\hfm_services\11.1.2.0\assembly.dat... Ok
Y:\Foundation11121\assemblies\essbase_integration_services... Not exists
Y:\Foundation11121\assemblies\staticContent\11.1.2.0\assembly.dat... Ok
Y:\Foundation11121\assemblies\aif\11.1.2.0\assembly.dat... Ok
Y:\Foundation11121\assemblies\calc... Not exists
Y:\Foundation11121\assemblies\bpm_architect_datasync... Not exists
Y:\Foundation11121\assemblies\essbase_services... Not exists
Y:\Foundation11121\assemblies\bpm_architect_batch_client... Not exists
Y:\Foundation11121\assemblies\productCommonComponents\11.1.2.0\assembly.dat.
.. Failed!
Assembly for win32 platform is used
Y:\Foundation11121\assemblies\hsf_server... Not exists
Y:\Foundation11121\assemblies\bpm_architect_webapp... Not exists
Y:\Foundation11121\assemblies\hps_webapp... Not exists
Y:\Foundation11121\assemblies\biplus_product_reporting_common... Not exists
Y:\Foundation11121\assemblies\fdm\11.1.2.0\assembly.dat... Ok
Y:\Foundation11121\assemblies\biplus_financial_reporting_common\11.1.2.0\ass
embly.dat... Ok
Y:\Foundation11121\assemblies\bpm_architect_generator... Not exists
Y:\Foundation11121\assemblies\biplus_webanalysis_webapp\11.1.2.0\assembly.da
t... Ok
Y:\Foundation11121\assemblies\biplus_workspace_webapp\11.1.2.0\assembly.dat.
.. Ok
Y:\Foundation11121\assemblies\essbase_client... Not exists
Y:\Foundation11121\assemblies\sharedServices\11.1.2.0\assembly.dat... Ok
Y:\Foundation11121\assemblies\essbase_studio... Not exists
Y:\Foundation11121\assemblies\biplus_portlets_webapp\11.1.2.0\assembly.dat..
. Ok
Y:\Foundation11121\assemblies\commonComponents\11.1.2.0\assembly.dat... Fail
ed!
Assembly for win32 platform is used
Y:\Foundation11121\assemblies\biplus_core_services\11.1.2.0\assembly.dat...
Ok
Y:\Foundation11121\assemblies\essbaseProductCommonComponents\11.1.2.0\assemb
ly.dat... Failed!
Assembly for win32 platform is used
Y:\Foundation11121\assemblies\essbase_studio_services... Not exists
Y:\Foundation11121\assemblies\oracle_common\11.1.2.0\assembly.dat... Ok
Y:\Foundation11121\assemblies\biplus_interactive_reporting_client... Not exi
sts
Y:\Foundation11121\assemblies\financial_close... Not exists
Y:\Foundation11121\assemblies\bpm_architect_services... Not exists
Y:\Foundation11121\assemblies\hfm_webapp\11.1.2.0\assembly.dat... Ok
Y:\Foundation11121\assemblies\essbase_administration_services_webapp... Not
exists
Y:\Foundation11121\assemblies\biplus_workspace_new_webapp\11.1.2.0\assembly.
dat... Ok
Y:\Foundation11121\assemblies\rmi... Not exists
Result of checking assemblies: Failed!
Checking environment variables...
Ok
Checking if the file exist and have read permissions: C:\Users\swang... Ok
User home have to exist for successful installation.
Checking User Account Control (UAC) state...
User Account Control is enabled. Installation may lead to unpredictable results
and thus will be stopped.
EPMINS-01001: One or more preinstallation checks failed. Correct the errors befo
re continuing with the installation.
Check assemblies:
Y:\Foundation11121\assemblies\biplus_product_reporting_client... Not exists
Failed!
Assembly for win32 platform is used
Y:\Foundation11121\assemblies\biplus_interactive_reporting_services... Not e
xists
Y:\Foundation11121\assemblies\hpm... Not exists
Failed!
Assembly for win32 platform is used
Y:\Foundation11121\assemblies\biplus_dds... Not exists
Y:\Foundation11121\assemblies\analytic_services_provider_webapp... Not exist
s
Y:\Foundation11121\assemblies\essbase_administration_services_client... Not
exists
Y:\Foundation11121\assemblies\biplus_product_reporting_services... Not exist
s
Y:\Foundation11121\assemblies\planning... Not exists
Y:\Foundation11121\assemblies\disclosure... Not exists
Y:\Foundation11121\assemblies\essbase_integration_services... Not exists
Y:\Foundation11121\assemblies\calc... Not exists
Y:\Foundation11121\assemblies\bpm_architect_datasync... Not exists
Y:\Foundation11121\assemblies\essbase_services... Not exists
Y:\Foundation11121\assemblies\bpm_architect_batch_client... Not exists
Failed!
Assembly for win32 platform is used
Y:\Foundation11121\assemblies\hsf_server... Not exists
Y:\Foundation11121\assemblies\bpm_architect_webapp... Not exists
Y:\Foundation11121\assemblies\hps_webapp... Not exists
Y:\Foundation11121\assemblies\biplus_product_reporting_common... Not exists
Y:\Foundation11121\assemblies\bpm_architect_generator... Not exists
Y:\Foundation11121\assemblies\essbase_client... Not exists
Y:\Foundation11121\assemblies\essbase_studio... Not exists
Failed!
Assembly for win32 platform is used
Failed!
Assembly for win32 platform is used
Y:\Foundation11121\assemblies\essbase_studio_services... Not exists
Y:\Foundation11121\assemblies\biplus_interactive_reporting_client... Not exi
sts
Y:\Foundation11121\assemblies\financial_close... Not exists
Y:\Foundation11121\assemblies\bpm_architect_services... Not exists
Y:\Foundation11121\assemblies\essbase_administration_services_webapp... Not
exists
Y:\Foundation11121\assemblies\rmi... Not exists
Press Enter to exit

LaserJet 5000 support in Windows 7 64 bit at 1200 DPI?

Hi,
We are still using our LaserJet 5000n as the workhorse of our practice for producing half-size architectural drawings. We have gone to Windows 7 64 bit and are not able to find a driver that will allow us to print at 1200 dpi. We have used the universal driver to print 11x17 but the maximum 600 dpi just doesn't cut it. Not only is the resolution lower, but the tones are completely different than on the XP machines which use an actuall 5000 driver. Any suggestions?
Thanks!
Steve

Try the following: on the Windows 7 machine go to the Devices and Printers folder, Add a Printer, Local Printer, Create a Port, Local Port, \\Computername\Printername (use the actual share name for the computer and printer), OK, then click on Windows Update and then select the appropriate driver.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HFM Client 11.1.1.3 is supported with Windows 7 64 bit OS??

Similar Messages

Maybe you are looking for