HFM client patch installation

Hi,
We have an HFM - FDM - Riporting system which consits 3 application servers and 1 terminal server.
The HFM application server were updated to the 11.1.2.1.600 version, but the terminal server which only have an HFM client remained on the 11.1.2.1.0 version.
As the .600 patch instruction says, we must stop the HFM processes and the IIS.
If I want to install this patch only to the terminal server, is it a must to stop these services?
I think the answer is not, because only a client will change, but please ensure me, if somebody has experience about a situation like this.
Regards,
Tamas

If there are no HFM related processes running on the machine you are applying the patch then you should be ok.
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

Best practise for installing patches for SCCM Client 2012 (Both x86 and x64)) - OSD and Client Push Installation

Hi All,
What is best practice for automatic installing of SCCM 2012 client Patches
(using Patch switch) during installation of SCCM 2012 clients? The challenge is that now there are two versions of clients and updates (x86 and x64).
I need information for:
OSD
Client Push Installation
Thank you in advance.
Regards,

Not everything that can be or is supported or not supported is documented (or ever can be):
http://technet.microsoft.com/en-us/magazine/jj643252.aspx
Your expectation here needs to be adjusted. No one recommended contacting support. William just mentioned that *if* you have an issue and needed to contact support, they may decline to help you because you've done something explicitly unsupported.
For clientpatch, here's the specific documentation noting it as unsupported:
http://blogs.technet.com/b/configmgrteam/archive/2009/04/08/automatically-applying-hotfixes-to-the-configuration-manager-2007-client-during-installation.aspx
Additionally, I've also been in contact with the sustained engineering folks responsible for the CUs and they've reinforced the statement.
What can happen? Who knows? Microsoft does not test against unsupported configurations and features -- that's the definition of unsupported. It's not tested so no one really knows. They did find a couple of explicit issues (outlined in that post above) so
know that at least those exist and probably more since it is, as mentioned, abandoned code.
Why does it matter what can happen though? If the folks who write and support the code tell you shouldn't do it, you are simply asking for problems by doing it. Ultimately, you're asking a question that has no defined answer (except "bad"/unsupported things)
that really doesn't matter if you follow the explicit guidance. If you don't, as William points out, that's a risk for you take and an answer for you to discover.
Jason | http://blog.configmgrftw.com

Hfm client 9.3.3 installation link

please provide a link for hfm client 9.3.3 installation.
thanks.

This is not issue but is a common behaviour of HFM Client as far as I know.
The HFM Client requires a temporary local storage folder where it can place temporary files when you work with the application using the HFM Client. It will ask for this local storage folder only for first time when a user opens an application. It will not ask for this information when the user opens the application the next time.
If you think it is asking everytime when the user accesses the application then I would assume that the Citrix session might be deleting temporary folder created, for some reason which you need to check why with your IT team.

HFM client installation & configuration

Hi,
I'm trying to access our HFM server from my local client. But I'm experiencing some difficulties...
1. I don't exactly know what products should I have installed (I have installed only HFM client and FR client)
2. How to configure HFM client to connect to our server?
I have successfully connected to the server from FR studio. But HFM isn't working...
Could anybody tell me what to do?
Thanks!
Vlado

Hi,
You have to start the server and web configuration of HFM. If you only have instralled the cliient then you should see only one tab.
enter the servername (FQDN or ip.nr) of your hfm server in the first box. Choose use automatic load balancing (or single server only if you want to connect to one server). But this is more depending on the way you connect to reports in biplus.
Press Add cluster and the clustername of you hfm server should be available.
That should be all.
Kind Regards Peter

9.2.0.6 client patch on XP - services conflict

Just downloaded the 9.2.0.6 .zip from MetaLink and tried to run the setup.exe to patch a client machine. The installer (10.1.0.3.0) reports this error:
Certain files which need to be reinstalled by Oracle Universal Installer are being used by one or more running services.
It then lists 30 services! I had no problems with any previous 9i client patches.
I have seen a few suggested workarounds (renaming directories, renaming .dlls in /bin, etc.), but none has worked.
Any suggestions to get this patch applied?

Set all relevant services to "Manual" startup. Then
reboot and try installing the patch. This generally
works for me. Don't forget to set all services to
"Automatic" startup when you are done.
Hope this helps.
Kailash.

Cannot see application in workspace (Created App via HFM client not BPMA)

Dear All,
I have some trouble with my 11.1.1.0 installation. After installation and configuration, I try to goto workspace to find consolidation administration and cannot find it. Then I tried to create an app using the HFM client but after granting all security to the user account, the application will not show up in workspace.
Is there anyway to un-register the HFM installation from Shared Services and Workspace and re-register the HFM installation. There is an option in previous Hyperion version 9 but in 11.1.1.0 there is no such option under the EPM configurator.
Can I fix it or it's pretty much a re-installation. Please give me some advice
Thanks in advance

Tried uninstall HFM and reinstall again.
Ran EPM onfigurator and everything seem to processed ok.
I can log onto Shared Service and see that I have created an HFM Application and be able to provision users to the application.
But when I log onto Workspace, it just won't show anything related to HFM, the application is not on my application list and under "Classic Application Administration" only Planning shows up and no HFM.
I have Apache running on 19000 and IIS running on 80.
Any idea what I can do to trouble shoot?
I tried to create 2 apps, I using http://compter:19000/hfm as security url and 1 using :80/hfm and neither makes any difference.
Edited by: Redcomet on Oct 15, 2009 7:42 PM

Windows 7 X86 Update patch installation failed ("Updateshandler.log - Update execution failed")

Hi,
I am using SCCM 2007 R3 at client site, Since from Jan 2015 and for Feb 2015 also i am facing a problem in Windows 7 32bit OS Patch installation failure on Client PC. I am creating a bundle for Windows 7 OS Patch's and targeting these monthly patches to
windows 7 Collection having X86 and X64 bit OS.
From All the Deployed Patches only X64 bit Win 7 PC's are getting successfully Update.
BUT on all X86(32Bit) win 7 OS there was Installation Failed Error. The UPDATES are getting successfully downloaded in CACHE folder on client PC's but while installation they are getting failed. I have tried reinstalling SCCM Client on PC but problem persists.
Checked number of forum's and done WUA re-installtion as well, Tried downloading new patches for win7 32 bit and deployed again, but no +ve result. WSUS reconfigured and reinstalled and approved all patches again, again no solution.
Updates for all other OS's Like Win 8, 8.1 Server 2003,2008 and 2012 for X86 and C64 all working fine.
Updateshandler.log Giving :---- Update execution failed.
MP DP and all other roles are working fine with SUP role reinsalled.
Tried:-
https://technet.microsoft.com/en-in/library/bb932189.aspx
http://blogs.technet.com/b/sudheesn/archive/2010/11/10/troubleshooting-sccm-part-iii-software-updates.aspx
https://social.technet.microsoft.com/Forums/systemcenter/en-US/c8c8715e-a1f7-4de1-b17f-d3a72c24db6c/updates-not-show-up?forum=configmgrsum
Please anyone help..
Regards
Rajiv.

1. We have tried downloading patch again & again . Try to push them trough SCCM targeting win7 collection having x-86 & x-64 bit OS.
2. Tried manual installation of . Cab files also on 10 win 7 x-86 PC's but all failing with error code.0x800706f7. This code shows The stub received bad data. In both cases (manual & SCCM )
3. Even tried downloading .MSU files for same KB article that also not getting installed
4. Monitored Windowsupdate.log & DISM.log & CBS.log
Handler Fatal: CBS called error with 0x800706f7
warning exit code=0x00000000; call error code=0x80240022
5. Tried renaming windir/Softwaredeployment folder to windir/Softwaredeployment.log & run SFC /Scannow
0x800706F7 -2147023113 RPC_X_Bad_Stub_Data This can occur after a control selfupdate that has not fully completed and requires a reboot. The controls may need to be reregistered.
This seems related to a problem within Windows, and ConfigMgr is not at fault - Windows has a severe issue which is affecting the servicing stack.
Try CheckSUR.
http://blogs.technet.com/b/roplatforms/archive/2011/04/28/installation-failures-cbs-store-corruptions-uncommon-issues-and-troubleshooting.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Is HFM Client 11.1.1.3 is supported with Windows 7 64 bit OS??

Hi,
Currently we are using HFM 11.1.1.3 version. Our company is upgrading all the Systems to Windows 7 machines. And would like to check whether it is supported with Windows 7 are not.
Ex. HFM Client, Hyperion Reporting Studio, Smartview etc. Do I need to install patches, if any. Let me know. Thanks.

Hello,
Following is taken from the support matrix --
Version Supported
Processor Type
OS Version
OS
32/64 bit
Exceptions and Additional Information
11.1.1.3
Intel / AMD x86-64
Microsoft Windows
Windows 7
1. 1.6 GHz minimum processor is required.
2. EXCEPTION: Firefox is not supported for: Data Relationship Management (Web Publishing), FDM, or Interactive Reporting.
3. EXCEPTION: Integration Services console only supports 32-bit binaries for x86-64.
4. EXCEPTION: Windows x86-64 is not supported for Data Integration Management or Financial Management Console.
5. Internet Explorer 8 and Windows 7 are supported for: Shared Services, Performance Management Architect, Calculation Manager, Smart View (with patch 9779433), Administration Services Web UI (Administration Services Console is not supported), Planning, Financial Management (with patch 9976978 when on Windows 7), EPM Workspace (with patch 9314073), Financial Reporting (with patch 9657652), Interactive Reporting, Web Analysis, Data Relationship Management, FDM, ERP Integrator.
See if that helps,
Thanks,
hyperionEPM
Please mark answers as helpful or correct for others to find them easily.

HFM Client 11.1.1.3 is supported with Windows 7 64 bit OS??

Hi,
Currently we are using HFM 11.1.1.3 version. Our company is upgrading all the Systems to Windows 7 machines. And would like to check whether it is supported with Windows 7 are not.
Ex. HFM Client, Hyperion Reporting Studio, Smartview etc. Do I need to install patches, if any. Let me know. Thanks.

Yes! HFM version 11.1.1.3 is supported by Windows 7 64 bit OS
Find the below Exceptions and Additional Information:
"1. 1.6 GHz minimum processor is required.
2. EXCEPTION: Firefox is not supported for: Data Relationship Management (Web Publishing), FDM, or Interactive Reporting.
3. EXCEPTION: Integration Services console only supports 32-bit binaries for x86-64.
4. EXCEPTION: Windows x86-64 is not supported for Data Integration Management or Financial Management Console.
5. Internet Explorer 8 and Windows 7 are supported for: Shared Services, Performance Management Architect, Calculation Manager, Smart View (with patch 9779433), Administration Services Web UI (Administration Services Console is not supported), Planning, Financial Management (with patch 9976978 when on Windows 7), EPM Workspace (with patch 9314073), Financial Reporting (with patch 9657652), Interactive Reporting, Web Analysis, Data Relationship Management, FDM, ERP Integrator."
Refer the below link for more information:
Supported Platforms Matrices - Oracle Enterprise Performance Management System</title><meta name="Title&qu…

How to change my client push installation version

I have one primary site server. I have updated it to 5.00.7958.1401 and this is the version shown if i check "about system center configuration manager".
When i push the client to machines by right clicking and choosing "install client"...SCCM installs client version 5.00.7958.1000.
How can I change it so my client push installs the CU3 version 1401?
Thanks

If you were to mess with the files in the client folder of the site server's installation path, you would place your self in an unsupported state, though this is simple...
how about using the PATCH parameter for ccmsetup.exe? You could configure it in the Client Push Installation / Installation Properties tab...
http://thecmadmin.com/2013/08/01/installing-cumulative-update-2-cu2-for-cm12-sp1-during-initial-client-install/
other reference:
http://blogs.technet.com/b/deploymentguys/archive/2012/10/11/automatically-populate-the-patch-property-for-the-configmgr-client-installation-updated-for-configmgr-2012.aspx

Oracle 10g patche installation

Dear Friends,
Very very happy new year.
We have oracle 10g release 10.2.0.2.0
DB client lib.     OCI_102 (10.2.0.1.
DB releases        ORACLE 9.2.0..,
DBSL version       700.08
DBSL Patch Level   201
OS is as below
Operating system     HP-UX
Machine type         ia64
Platform ID          274
Now we have to apply oracle patches.
IF any one has done this or having any document , please provide me and any idea is most welcome

Hi Dear,
Thanks fro your reply.
We are applying the patches but getting the errors as below.
Please help me.
MOPatch - Install Multiple Oracle Patches in One Run - 2.1.6.
Copyright (c) Oracle Corporation 2007-2010. All Rights Reserved.
Version:       2.1.6
Revision:      5.1.2.10
Command-line: /oracle/DVR/102_64/MOPatch/mopatch.sh
Oracle Home:   /oracle/DVR/102_64RDBMS version: 10.2.0.2.0
OPatch version:10.2.0.2.5
Clean-up:      supportedPSUs:          not supportedLog file:      $ORACLE_HOME/cfgtoollogs/mopatch/mopatch-2011_01_17-17-33-13.logPatch base:    .Patch source: .Link script:   ./link.shReadmes:       <none>
Strpd. Readmes:<none>make utility: /usr/ccs/bin/makeunzip utility: /oracle/DVR/102_64/bin/unzip
Getting pre-run patch inventory...executing: "/oracle/DVR/102_64/OPatch/opatch" lsinventory -retry 0 -invPtrLoc /oracle/DVR/102_64/oraInst.loc -xml "./mopatch-22436-8022-tmpdir/preinv.xml"
Invoking OPatch 10.2.0.2.5Oracle Interim Patch Installer version 10.2.0.2.5Copyright (c) 2007, Oracle Corporation. All rights reserved.Oracle Home       : /oracle/DVR/102_64Central Inventory : /oracle/oraInventory   from           : /oracle/DVR/102_64/oraInst.locOPatch version    : 10.2.0.2.5OUI version       : 10.2.0.2.0OUI location      : /oracle/DVR/102_64/ouiLog file location : /oracle/DVR/102_64/cfgtoollogs/opatch/opatch2011-01-17_17-33-14PM.logLsinventory Output file location : /oracle/DVR/102_64/cfgtoollogs/opatch/lsinv/lsinventory2011-01-17_17-33-14PM.txt
Installed Top-level Products (2): Oracle Database 10g            racle Database 10g Release 2 Patch Set 1                            10.2.0.2.0There are 2 products installed in this Oracle Home.Interim patches (45) :
OPatch failed with error code 74Processing patch "SAP_102051_201012_HPUXIA64.zip!9980062"...failed.
Reason: Cannot apply patch.Processing patch "SAP_102051_201012_HPUXIA64.zip!9952230"...(2 of 44)
executing: "/oracle/DVR/102_64/bin/unzip" -qq -d "./mopatch-22436-8022-tmpdir" "./SAP_102051_201012_HPUXIA64.zip" "SAP_102051_201012/9952230/*"
executing: ( cd "./mopatch-22436-8022-tmpdir/stage/SAP_102051_201012/9952230" && "/oracle/DVR/102_64/OPatch/opatch" apply -silent -no_relink -local -invPtrLoc /oracle/DVR/102_64/oraInst.loc )Invoking OPatch 10.2.0.2.5
Oracle Interim Patch Installer version 10.2.0.2.5Copyright (c) 2007, Oracle Corporation. All rights reserved.
Oracle Home       : /oracle/DVR/102_64Central Inventory : /oracle/oraInventory   from           : /oracle/DVR/102_64/oraInst.loc
OPatch version    : 10.2.0.2.5OUI version       : 10.2.0.2.0OUI location      : /oracle/DVR/102_64/oui
Log file location : /oracle/DVR/102_64/cfgtoollogs/opatch/opatch2011-01-17_17-33-30PM.log
ApplySession applying interim patch '9952230' to OH '/oracle/DVR/102_64'
Interim Patch 9952230 has Conflict with patch(es) [ 7237154 6455161 5618049 5531355 ] in OH /oracle/DVR/102_64
Conflict patches:   7237154 6455161 5618049 5531355
Patch(es) 7237154 6455161 5618049 5531355 conflict with the patch currently being installed (9952230).
If you continue, patch(es) 7237154 6455161 5618049 5531355 will be rolled back and the new patch (9952230) will be installed.If a merge of the new patch (9952230) and the conflicting patch(es) ( 7237154 6455161 5618049 5531355) is required, contact Oracle Support Services and request a Merged patch.Do you want to proceed? [y|n]
N (auto-answered by -silent)User Responded with: NApplySession failed during prerequisite checks: ApplySession exits on requestSystem intact, OPatch will not attempt to restore the systemThe following warnings have occurred during OPatch execution:1) OUI-67012:Interim Patch 9952230 has Conflict with patch(es) [ 7237154 6455161 5618049 5531355 ] in OH /oracle/DVR/102_64OPatch failed with error code 74executing: ( cd "./mopatch-22436-8022-_102051_201012/9952230" && "/oracle/DVR/102_64/OPatch/opatch" apply -force -silent -no_relink -local -invPtrLoc /oracle/DVR/102_64/oraInst.loc )
Invoking OPatch 10.2.0.2.5Oracle Interim Patch Installer version 10.2.0.2.5Copyright (c) 2007, Oracle Corporation. All rights reserved.Oracle Home       : /oracle/DVR/102_64Central entory : /oracle/oraInventoryfrom           : /oracle/DVR/102_64/oraInst.loc
OPatch version    : 10.2.0.2.5OUI version       : 10.2.0.2.0OUI location      : /oracle/DVR/102_64/ouiLog file location : /oracle/DVR/102_64/cfgtoollogs/opatch/opatch2011-01-17_17-33-40PM.log
ApplySession applying interim patch '9952230' to OH '/oracle/DVR/102_64'
Interim Patch 9952230 has Conflict with patch(es) [ 7237154 6455161 5618049 5531355 ] in OH /oracle/DVR/102_64
Conflict patches:   7237154 6455161 5618049 5531355
Patch(es) 7237154 6455161 5618049 5531355 conflict with the patch currently being installed (9952230).
If you continue, patch(es) 7237154 6455161 5618049 5531355 will be rolled back and the new patch (9952230) will be installed.If a merge of the new patch (9952230) and the conflicting patch(es) ( 7237154 6455161 5618049 5531355) is required, contact Oracle Support Services and request a Merged patch.
Do you want to proceed? [y|n]Y (auto-answered by -silent)User Responded with: YRunning prerequisite checks...
Patch 9952230: Optional component(s) missing : [ oracle.rdbms, 10.2.0.5.0 ] , [ oracle.rdbms.rsf, 10.2.0.5.0 ] , [ oracle.rdbms.dbscripts, 10.2.0.5.0 ] Prerequisite check "CheckApplicable" failed.
The details are:Patch is no-op patch.ApplySession failed during prerequisite checks: Prerequisite check "CheckApplicable" failed.System intact, OPatch will not attempt to restore the system
The following warnings have occurred during OPatch execution:
1) OUI-67012:Interim Patch 9952230 has Conflict with patch(es) [ 7237154 6455161 5618049 5531355 ] in OH /oracle/DVR/102_64Patch failed with error code 74Processing patch "SAP_102051_201012_HPUXIA64.zip!9952230"...skipped.Reason: Patch conflicts.Processing patch "SAP_102051_201012_HPUXIA64.zip!9770451"...(3 of 44)
executing: "/oracle/DVR/102_64/bin/unzip" -qq -d "./mopatch-22436-8022-tmpdir" "./SAP_102051_201012_HPUXIA64.zip" "SAP_102051_201012/9770451/*"
executing: ( cd "./mopatch-22436-8022-tmpdir/stage/SAP_102051_201012/9770451" && "/oracle/DVR/102_64/OPatch/opatch" apply -silent -no_relink -local -invPtrLoc /oracle/DVR/102_64/oraInst.loc )
Invoking OPatch 10.2.0.2.5Oracle Interim Patch Installer version 10.2.0.2.5
Copyright (c) 2007, Oracle Corporation. All rights reserved.
Oracle Home       : /oracle/DVR/102_64Central Inventory : /oracle/oraInventory
   from           : /oracle/DVR/102_64/oraInst.loc
OPatch version    : 10.2.0.2.5
OUI version       : 10.2.0.2.0
OUI location      : /oracle/DVR/102_64/oui
Log file location : /oracle/DVR/102_64/cfgtoollogs/opatch/opatch2011-01-17_17-33-51PM.log
ApplySession applying interim patch '9770451' to OH '/oracle/DVR/102_64'
Running prerequisite checks...
Patch 9770451: Optional component(s) missing : [ oracle.rdbms, 10.2.0.5.0 ]
Prerequisite check "CheckApplicable" failed.
The details are:
Patch is no-op patch.
ApplySession failed during prerequisite checks: Prerequisite check "CheckApplicable" failed.
System intact, OPatch will not attempt to restore the system
OPatch failed with error code 74
Processing patch "SAP_102051_201012_HPUXIA64.zip!9770451"...failed.
Reason: Cannot apply patch.
Processing patch "SAP_102051_201012_HPUXIA64.zip!9584028"...(4 of 44)
executing: "/oracle/DVR/102_64/bin/unzip" -qq -d "./mopatch-22436-8022-tmpdir" "./SAP_102051_201012_HPUXIA64.zip" "SAP_102051_201012/9584028/*"
executing: ( cd "./mopatch-22436-8022-tmpdir/stage/SAP_102051_201012/9584028" && "/oracle/DVR/102_64/OPatch/opatch" apply -silent -no_relink -local -invPtrLoc /oracle/DVR/102_64/oraInst.loc )
Invoking OPatch 10.2.0.2.5
Oracle Interim Patch Installer version 10.2.0.2.5
Copyright (c) 2007, Oracle Corporation. All rights reserved.
Oracle Home       : /oracle/DVR/102_64
Central Inventory : /oracle/oraInventory
   from           : /oracle/DVR/102_64/oraInst.loc
OPatch version    : 10.2.0.2.5
OUI version       : 10.2.0.2.0
OUI location      : /oracle/DVR/102_64/oui
Log file location : /oracle/DVR/102_64/cfgtoollogs/opatch/opatch2011-01-17_17-33-58PM.log
ApplySession applying interim patch '9584028' to OH '/oracle/DVR/102_64'
Running prerequisite checks...
Prerequisite check "CheckApplicable" failed.
The details are:
Patch 9584028: Required component(s) missing : [ oracle.rdbms, 10.2.0.5.0 ]
ApplySession failed during prerequisite checks: Prerequisite check "CheckApplicable" failed.
System intact, OPatch will not attempt to restore the system
OPatch failed with error code 74
Processing patch "SAP_102051_201012_HPUXIA64.zip!9584028"...failed.
Reason: Cannot apply patch.
Processing patch "SAP_102051_201012_HPUXIA64.zip!9548269"...(5 of 44)
executing: "/oracle/DVR/102_64/bin/unzip" -qq -d "./mopatch-22436-8022-tmpdir" "./SAP_102051_201012_HPUXIA64.zip" "SAP_102051_201012/9548269/*"
executing: ( cd "./mopatch-22436-8022-tmpdir/stage/SAP_102051_201012/9548269" && "/oracle/DVR/102_64/OPatch/opatch" apply -silent -no_relink -local -invPtrLoc /oracle/DVR/102_64/oraInst.loc )
Invoking OPatch 10.2.0.2.5
Regards
Ganesh Datt Tiwari

Oracle Client 11gR2 installation issue on RHEL v5.4 64-bit

Hi,
I am trying to install Oracle Client software 11gR2 on RHEL v5.4 64-bit. I have resolved all the libraries dependency as well as Kernel changes as suggested by the installer. The error in the log file is as attached. At present I have "skipped" this error and proceeded with installation.
While installing the client, the installer fails while configuring the Net CA with error:
INFO: Done parsing command line arguments.
INFO: Oracle Net Services Configuration:
INFO: #
INFO: # An unexpected error has been detected by HotSpot Virtual Machine:
INFO: #
INFO: # SIGSEGV (0xb) at pc=0xe5e97498, pid=27377, tid=4160075984
INFO: #
INFO: # Java VM: Java HotSpot(TM) Client VM (1.5.0_17-b02 mixed mode)
INFO: # Problematic frame:
INFO: # C [libnnz11.so+0x3c498]
INFO: #
INFO: # An error report file with more information is saved as hs_err_pid27377.log
INFO: #
INFO: # If you would like to submit a bug report, please visit:
INFO: # http://java.sun.com/webapps/bugreport/crash.jsp
INFO: #
WARNING: /home/oracle/app/oracle/product/11.2.0/client_1/bin/netca: line 178: 27377 Aborted $JRE $JRE_OPTIONS -classpath $CLASSPATH oracle.ne
t.ca.NetCA $*
WARNING:
INFO:
INFO: Completed Plugin named: Oracle Net Configuration Assistant
INFO: Oracle Net Configuration Assistant failed.
INFO: Oracle Net Configuration Assistant failed.
Also when I invoke the SQL Client; sqlplus user@db and enter the password, the sqlplus exits without any error and returns to the terminal console. Please note earlier I has getting a SELinux violation and have changed it to "permissive" mode
Please let me know how to resolve NetCA installation and the sqplus issue.
Thanks & regards,
Vinay

Hi,
Thet NetCA error occurs during installation and I believe the installer should take care of the ORACLE_HOME variable setting.
But before invoking sqlplus I have set the ORACLE_HOME and LD_LIBRARY_PATH setting in the .bash_profile as mentioned in the installation guide. The snippet of the profile file is:
export ORACLE_HOME=~/app/oracle/product/11.2.0/client_1
export JAVA_HOME=$ORACLE_HOME/jdk
export PATH=$ORACLE_HOME/bin:$JAVA_HOME/bin:$PATH;
export LD_LIBRARY_PATH=$ORACLE_HOME:$LD_LIBRARY_PATH
export TNS_ADMIN=$ORACLE_HOME/network/admin
export TWO_TASK=mmcoedb
I am able to tnsping to the server/service name too but when I try to login using the user/password using sqlplus, it simply exits without any error.
Please let me know how to resolve the error.
Best regards,
Vinay

How to set time zone for a session in Client Only installation

Environment:
OS : Unix (HP-UX 11.0)
Oracle DB : Ver 8.0.5
Developer : Ver 1.6 ( Client only Installation)
Developer also on Unix.
RDBMS and Developer Installed on different
home directories.
Our development is Forms 4.5 on X windows.
Runtime is forms character mode.
Probelm Description:
To run the application I am using TWO_TASK to connect to the database. In our application we have to take care of time zones. For that in previous versions(NO TWO_TASK used) I used TZ unix environment variable, to get time zone dependent time wherever sysdate is used.
Now because I am using TWO_TASK, oracle is no more using users TZ settings.
Question : Is there any way I can make oracle to use the TZ environment setting

Thanks for replying Johnny!
What you are referring to is adding a city. I need to know how to set the time zone in settings -> Date & Time -> Timezone. Unless & untill this is set properly the iPod will never show me the right time. Please help me with it.
I will definately use your advice on the second query.
Thanks once again!
Windows XP Pro

Error While open the application in a Cluster on HFM Client

Hi,
I have added Cluster in Clinet configuration in HFm, after adding the cluster successfully i have logged into finacial management client then i have selected the Cluster and it opens pop up windows which we need to Select the temp folder for that application
my problem starts here after givingthe folder it thorws me an error( some times we were able to select the application and assigned the folder with out any issues, but some times we could not)
we tried with different credentials but no luck.
Here is the Error
"Could not Authenticate the specified user"
Error Reference Number: {5895D16C-F1B9-475B-A3A4-F577D1A28449}
Num: 0x8004021a;Type: 0;DTime: 3/6/2012 9:30:02 AM;Svr: HFM Client machine;File: CHsxClient.cpp;Line: 2343;Ver: 11.1.1.1.0.2120;ExErr: Unknown Error;
Can any body please help me!
Thanks
Ashok
Edited by: Ashok on Mar 6, 2012 6:40 AM

Hi Ashok,
Please check the below link which might resolve the issue.
Financial Management Error "There was some communication error" (Doc ID 1280613.1)
Hope this helps,
Thank you,
Charles Babu J

Oracle Client patch 8.1.7.1.5, in relation to COM

So that we may better diagnose DOWNLOAD problems, please provide the following information.
- Server name
- Filename
- Date/Time
- Browser + Version
- O/S + Version
- Error Msg

Does anyone know where I can download the Oracle Client patch 8.1.7.1.5?
Also, can anyone help with the following problem? I'm having problems
creating a Oracle Service for MTS, error message: "Unable to read
registry values! Failed.".
Regards,
Jaeson

HFM client patch installation

Similar Messages

Maybe you are looking for