HFM Cluster configuration is failing in distributed environment

Hi Gurus,
I am configuring HFM 11.1.2 on windows 2008 server with sql server 2005.This is a distributed installation.
Server 1:
Financial Management Server
Server 2:
Financial Management Web Services Web Application
Financial Management Web Services IIS Web Application
Financial Management Smart View IIS Web Application
Financial Management IIS Web Application
Financial Management LCM IIS Web Application
Server 3: SQL Server 2005
on server 1 i am able to configure the hfm but when i tried cluster configuration from server 2 then its failing and giving the error "Tue Sep 14 05:43:13 2010) Failed to register cluster: Access is denied. Line:3809 File: .\CEPMWindowsConfig.cpp Error code:0x80070005 Error: Access is denied.
(Tue Sep 14 05:43:13 2010) Failed to register cluster containing server adc6140810: IDispatch error #1553"
can you help me to ressolve this issue.
Thanks
Krishna

Hello Krishna,
Any luck fixing this issue? I am experiencing the same issue. Please advise, thank you.

Similar Messages

OUI-25031 Cluster Configuration Assistant Fails Windows 2003 server RAC

Hi All
I am installing RAC on Windows 2003 Server X64, Dell PowerEdge 2950 Servers with iSCSI Storage.
I have 3 Network cards on each node which are configured like this
# Public
10.2.0.8 USTISDB-1.USTIS.Brgpoint.com USTISDB-1 --- in DNS
10.2.0.9 USTISDB-2.USTIS.Brgpoint.com USTISDB-2
#Virtual
10.2.0.10 USTISDB-1-vip.USTIS.Brgpoint.com USTISDB-1-vip --- in DNS
10.2.0.11 USTISDB-2-vip.USTIS.Brgpoint.com USTISDB-2-vip
#Private
192.168.2.2 USTISDB-1-priv.USTIS.Brgpoint.com USTISDB-1-priv --- in Hosts file
192.168.2.3 USTISDB-2-priv.USTIS.Brgpoint.com USTISDB-2-priv
#iSCSI Storage
192.168.1.2 Storage --- in DNS
Everything Pings everything.
When I start the installation , it installs clusterware and completes the remote operations but fails at cluster configuration window.
After checking the logs I found the list of failed commands and it says
INFO: Command = C:\WINDOWS\system32\cmd /c call E:\oracle\product\10.2.0\crs/install/crssetup.config.bat
PROT-1: Failed to initialize ocrconfig
Step 1: checking status of CRS cluster
Step 2: creating directories (E:\oracle\product\10.2.0\crs)
Step 3: configuring OCR repository
ocr upgrade failed with (-1)
Execution of the plugin was aborted
INFO: Configuration assistant "Oracle Clusterware Configuration Assistant" was canceled.
and then I checked E:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands and i says
rem Copyright (c) 1999, 2005, Oracle. All rights reserved.
C:\WINDOWS\system32\cmd /c call E:\oracle\product\10.2.0\crs/install/crssetup.config.bat
E:\oracle\product\10.2.0\crs/bin/racgons.exe add_config USTISDB-1.USTIS.Brgpoint.com:6200 USTISDB-2.USTIS.Brgpoint.com:6200
E:\oracle\product\10.2.0\crs/bin/oifcfg.exe setif -global "public"/10.0.0.0:public "private"/192.168.2.0:cluster_interconnect
C:\WINDOWS\system32\cmd /c call E:\oracle\product\10.2.0\crs/bin/vipca.bat -silent -nodelist "USTISDB-1,USTISDB-2" -nodevips "USTISDB-1//255.0.0.0/public,USTISDB-2//255.0.0.0/public"
C:\WINDOWS\system32\cmd /c call E:\oracle\product\10.2.0\crs/bin/cluvfy.bat stage -post crsinst -n "USTISDB-1,USTISDB-2"
Please help, Any help will be highly appreciated.
Edited by: user651560 on Nov 13, 2008 3:24 PM

E:\Staging\102010_win64_x64_clusterware\clusterware\cluvfy>runcluvfy stage -pre crsinst -n ustisdb-1,ustisdb-2 -verbose
The system cannot find the file specified.
Performing pre-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "USTISDB-1"
Destination Node Reachable?
ustisdb-1 yes
ustisdb-2 yes
Result: Node reachability check passed from node "USTISDB-1".
Checking user equivalence...
Check: User equivalence for user "Administrator"
Node Name Comment
ustisdb-2 passed
ustisdb-1 passed
Result: User equivalence check passed for user "Administrator".
Checking administrative privileges...
Checking node connectivity...
Interface information for node "ustisdb-2"
Interface Name IP Address Subnet
public 10.2.0.9 10.0.0.0
private 192.168.2.3 192.168.2.0
san 192.168.1.6 192.168.1.0
Interface information for node "ustisdb-1"
Interface Name IP Address Subnet
public 10.2.0.8 10.0.0.0
private 192.168.2.2 192.168.2.0
san 192.168.1.5 192.168.1.0
Check: Node connectivity of subnet "10.0.0.0"
Source Destination Connected?
ustisdb-2:public ustisdb-1:public yes
Result: Node connectivity check passed for subnet "10.0.0.0" with node(s) ustisdb-2,ustisdb-1.
Check: Node connectivity of subnet "192.168.2.0"
Source Destination Connected?
ustisdb-2:private ustisdb-1:private yes
Result: Node connectivity check passed for subnet "192.168.2.0" with node(s) ustisdb-2,ustisdb-1.
Check: Node connectivity of subnet "192.168.1.0"
Source Destination Connected?
ustisdb-2:san ustisdb-1:san yes
Result: Node connectivity check passed for subnet "192.168.1.0" with node(s) ustisdb-2,ustisdb-1.
Suitable interfaces for the private interconnect on subnet "10.0.0.0":
ustisdb-2 public:10.2.0.9
ustisdb-1 public:10.2.0.8
Suitable interfaces for the private interconnect on subnet "192.168.2.0":
ustisdb-2 private:192.168.2.3
ustisdb-1 private:192.168.2.2
Suitable interfaces for the private interconnect on subnet "192.168.1.0":
ustisdb-2 san:192.168.1.6
ustisdb-1 san:192.168.1.5
ERROR:
Could not find a suitable set of interfaces for VIPs.
Result: Node connectivity check failed.
Checking system requirements for 'crs'...
Check: Operating system version
Node Name Available Required Comment
ustisdb-2 Windows Server 2003 Windows Server 2003 passed
ustisdb-1 Windows Server 2003 Windows Server 2003 passed
Result: Operating system version check passed.
Check: Total memory
Node Name Available Required Comment
ustisdb-2 15.99GB (16771724KB) 512MB (524288KB) passed
ustisdb-1 15.99GB (16771724KB) 512MB (524288KB) passed
Result: Total memory check passed.
Check: Swap space
Node Name Available Required Comment
ustisdb-2 17.4GB (18241648KB) 1GB (1048576KB) passed
ustisdb-1 17.4GB (18241648KB) 1GB (1048576KB) passed
Result: Swap space check passed.
Check: System architecture
Node Name Available Required Comment
ustisdb-2 64-bit 64-bit passed
ustisdb-1 64-bit 64-bit passed
Result: System architecture check passed.
Check: Free disk space in "C:\DOCUME~1\ADMINI~1.UST\LOCALS~1\Temp\1" dir
Node Name Available Required Comment
ustisdb-2 23.7GB (24848248KB) 400MB (409600KB) passed
ustisdb-1 23.65GB (24797157KB) 400MB (409600KB) passed
Result: Free disk space check passed.
System requirement passed for 'crs'
Pre-check for cluster services setup was unsuccessful on all the nodes.

How to configure oracle AQ for distributed environment?

Hi All,
I have a scenerio In which I have say 4 AQ in which I will post the message.
Also i have say 2 database.
I am planning to create an MDB which will poll on these AQ's, so whenever I post message the MDB will read it and perform a specific action.
I believe I can create only one MDB per queue, if it is so then I have to create 8 MDB. As there 2 datasource and 4 MDB.
Is there any other way to handel this I mean without creating 8 MDB as the Data sources can increase to 10 to 20 so the number of MDB will be 20 to 40.
I guess this will affect the application performance.
Can I make some changes in application so that only few MDB's are required?
Any idea is welcome!!
Regards
-Vinod

Hi Andreas,
Thanks you for your help. I am trying to implement third party external LDAP authentication for APEX and Forms.
So I started with OID and SSO setup to create external Partner Applications. Some reason my oid and sso web login links are not working. I didn't find any errors. I need some help in finding the problem and direction, I already read docs on web but no proper direction. I appreciate your help.
Thanks

EPM 11.1.2.1 Installtion in Distributed environment

Hi,
I got a requirement to install and configure below components in distributed environment in windows 2008 server, the database is SQL Sever 2008.
- Oracle Hyperion Shared Services 11.1.2.1
- Oracle Hyperion BI+ Workspace 11.1.2.1
- Oracle Hyperion Essbase 11.1.2.1
- Oracle Hyperion Essbase Administration Services 11.1.2.1
- Oracle Hyperion Analytic Provider Services 11.1.2.1
- Oracle Hyperion Planning 11.1.2.1
- Oracle Hyperion BI+ Financial Reporting 11.1.2
- Oracle Hyperion Web Analysis11.1.2
- Oracle Data Integrator
4 servers and here is the approach I would like to follow. Please give if this is the correct sequence of installation and configuration:
Server1: -
Oracle Hyperion Shared Services 11.1.2.1 , Oracle Hyperion BI+ Workspace 11.1.2.1. I believe Weblogic Application server will be installed in this server. I will be configuring both components in 1 SQL Server database.
Next components installing in Server2: I will be configuring EAS component in 1 SQL Server database.
- Oracle Hyperion Essbase 11.1.2.1
- Oracle Hyperion Essbase Administration Services 11.1.2.1
- Oracle Hyperion Analytic Provider Services 11.1.2.1
Next components installing in Server3: I will be configuring Planning component in 1 SQL Server database.
Oracle Hyperion Planning 11.1.2.1
Next components installing in Server4: I will be configuring HFR in 1 Schema and web Analysis in 1 Schema. And not sure how to install and configure the ODI, Please share your experience in installing and configuring ODI and how many schemas required for it.
- Oracle Hyperion BI+ Financial Reporting 11.1.2
- Oracle Hyperion Web Analysis11.1.2
- Oracle Data Integrator
Advance thanks for your ideas.
Best Regards,
UB

The documentation contains lots of useful information I really think you should study it before even attempting, also take note of the information provided in - http://download.oracle.com/docs/cd/E17236_01/epm.1112/epm_install_11121/ch03s03.html
For ODI the RCU utility creates the master and work repository, the documentation takes you through the steps or just search on the web as there are a number of installation guides if you trust them.
Cheers
John
http://john-goodwin.blogspot.com/

Deploy to Application Server Failed on a distributed environment

Hi All,
I am trying to configure new Hyperion verion 11.1.2.2 on distributed environment but during configuring calculation manager to application server failed and getting error message like "Deploy to Application Server Failed". I am not sure what is issue and how to fix it. I have tried to read log files but I am not able to undersantd where to look and debug this issue.
My Hyperion Environment over view as a below:-
1- I have used Microsoft VMWARE to build my Hyperion Enviornment
2- I have created 1 window server 2003 domain and made 4 clients of that domain. (All these systems have windows server 2003 installed). I have given name to each client server i.e. System A, System B, System C, System D
3- I have installed SQL 2005 and created databases for all Hyperion components i.e. Shared services, calculation manager, epma on a system A
5- I have installed and configured foundation services and weblogic server on a system B. (In this system I have installed and configured shared services, weblogic, workspace, and able to deploye application server on a same system)
6- On a system A I am able to complete installation for hyperion Performance Management Architect and Calculation Manager and able to finish all type of configuration for these two components but as soon as system trying to configure any related to APPLICATION SERVER services it fails to configure. On a configuration summary page system shows everything is configured but APPLICATION SERVER says FAILED wrtten on a red color letters.
I have explored log files and found that Calculation Manager application server failed to deploy or Deploy to Application server failed.....
Since, I am not sure where to look and how to debug this issue I am requesting to all hyperion friends to help and guide me to debug as I have been trying to install this product since last friday and still no out put....
I will be really thankful if someone share his or her wisdom to help me....
Thank you to all in Advance.....
Thanks,
Safi

Did you install all the WebLogic web applications on the foundation machine as well as the machine they are going to be deployed to.
"On the machine on which you plan to administer the WebLogic Server, you must install all Web applications for all applications you plan to deploy on any machine in the environment. (The WebLogic Administration Server is installed and deployed on the Foundation Services machine.)"
Cheers
John
http://john-goodwin.blogspot.com/

Live migration to HA failed leaving VHD on local storage and VM in cluster = Unsupported Cluster Configuration

Hi all
Fun one here, I've been moving non-HA VMs to a HA and everything has been working perfectly until now. All this is being performed on Hyper-V 2012R2, Windows Server 2012R2 and VMM 2012R2.
For some reason on the VMs failed the migration with an error 10608 "Cannot create or update a highly available virtual machine because Virtual Machine Manager could not locate or access Drive:\Folder" The odd thing is the drive\folder is
a local storage one and I selected a CSV in the migration wizard.
The net result is that the VM is half configured into the cluster but the VHD is still on local storage. Hence the "unsupported cluster configuration" error.
The question is how do I roll back? I either need to get the VM out of the cluster and back into a non-HA state or move the VHD onto the CSV. Not sure if the latter is really a option.
I've foolishly clicked "Ignore" on the repair so now I can't use the "undo" option (brain fade moment on my part).
Any help gratefully received as I'm a bit stuck with this.
Thanks
Rob

Hi Simar
Thanks for the advice, I've now got the VM back in a stable state and running HA.
Just to finish off the thread for future I did the following
- Shutdown the VM
- Remove the VM from the Failover Cluster Manager (as you say this did leave the VM configuration intact)
- I was unable to import the VM as per your instructions so I copied the VHD to another folder on the local storage and took a note of the VM configuration.
- Deleted the VM from VMM so this removed all the configuration details/old VHD.
- Built a new VM using the details I saved from the point above
- Copied the VHD into the new VMs folder and attached it to the VM.
- Started it up and reconfigured networking
- Use VMM to make the VM HA.
I believe I have found the reason for the initial error, it appears there was a empty folder in the Snapshot folder, probably from an old Checkpoint that hadn't cleaned up properly when it was deleted.
The system is up and running now so thanks again for the advice.
Rob

How to configure boe.properties file in ACTool for SAP BO Distributed environment

Hi ,
I am trying to configure the ACTool for SAP BO distributed environment (dedicated BOE Server, Tomcat and Explorer) servers. I have installed SMD Agent, Host Agent and ACTool without any issues in the BOE server(CMS), but I am unable to run the ACTool in Tomcat Server(Web Tier) and Explorer servers.
1. How can we configure the boe.properties file for Tomcat Server and Explorer ser to run ACTool?
2. Is it required to install SMD_Agent and Host_Agent in Tomcat Server and Explorer server (in my case i have already installed).
3. What all parameters need to be set in boe.properties file so that ACTool will run correctly in Tomcat server and Explorer server correctly.
Regards
Pramod

Hi ,
I am trying to configure the ACTool for SAP BO distributed environment (dedicated BOE Server, Tomcat and Explorer) servers. I have installed SMD Agent, Host Agent and ACTool without any issues in the BOE server(CMS), but I am unable to run the ACTool in Tomcat Server(Web Tier) and Explorer servers.
1. How can we configure the boe.properties file for Tomcat Server and Explorer ser to run ACTool?
2. Is it required to install SMD_Agent and Host_Agent in Tomcat Server and Explorer server (in my case i have already installed).
3. What all parameters need to be set in boe.properties file so that ACTool will run correctly in Tomcat server and Explorer server correctly.
Regards
Pramod

ISE Configuration in Distributed Environment

Hi All,
I have quick questions about ISE deployment in Distributed environment, as i have purchased 2 X Cisco ise 3395 - For Data Center and 3 X Cisco ISE 3355 for remote location with 3500 Base licences and 500 Advance licences.
i have some questions on this deployment
i will install 1 3395 in Primary Datacenter and other 3395 in Our secondary Data center as Primary admin+Primary Monitoring and Secondary Admin+Secondary Monitoring
and each 3355 will get installed in Remote location as policy server, My Question is it this will be correct deployment?
or while configuring 3395 do i need to configure Policy server as well in addition to Primary admin and monitoring?
or please suggest me best deployment stratagy!
Thanks,
Sachin

Thanks for the reply,
all three sites are connected in MPLS with 100MB redundant band width
we are have 2 data center one is primary and other is secondary. and all client locations are connected with 100 Meg links where i am planning to install 3355 which will act as authentication server.
but now my question is
3395 - Primary Admin+Primary Monitoring - Primary DC
3395 - Secondary Admin+ Secondary Monitoring - Secondary DC
3355- will say for one remote location(PSN)
3355- Second remote Location(PSN)
3355- third Remote location (PSN)
thanks,
Sachin

Hyperion 11.1.1.3 Installation and Configuration on a Distributed Environ:

Hi All,
We have Only Hyperion Production Servers on a Distributed Environment. Now, we are thinking to create new instance that will be called Development Environment and that must be replica or mirror of Prod Environment. For that we cloned Production Servers.
Since we have all four servers Cloned for Development Environment now I need to Configure those all four instances.....I never worked with installations and configurations ...I do have knowledge and little experience with single tier or one system installation and configuration but distributed environment....I need your support and guideline to configure these boxes...
Our Distributed Environment lay out is as follows:-
We have installed Hyperion on Windows Server 2003 and Database is SQL Server
(1) We have Four Servers
(a) SQL, which Contains these services EPMA, and IIS Admin Service, World Wide Publishing Services, Hyperion Calc Manager-Web Application,
Hyperion EPMA (.Net JNI Bridge, Engine Manager, Event Manager, Job Manager, Process Manager, Web Application, and Data Syn-WebApplication)
(b) Essbase Server Contains these services Hyp ERP Integrator-Web Application, Hyp Essbase Services, Hyp financial Data Quality Management-
Task Manager
(c) Planning Server contains these Services Hyp Financial Reporting-Web Application, Hyperion Planning-Web Application, Hyp RMI Registry,
Hyp Web Analysis-Web Application
(d) Workspace Server Contains these services Hyp Finacial Reporting (Java RMI Registy, Print Server, Report Server, Scheduler Server), Hyp Foundatio
OpenLDAP, Hyp foundation shared services-web application, Hyp Provider Services - web application, Hyp Workspace (agent service and web application)
(2) Now my question is which server needs to be configured 1st then next and next and what things or steps i need to follow for configuration that works fine?
I know I can run EPMA configure tool for each system from Stat>All program>Oracle EPMA>EPMA Configuration> and then select tool to run.....But I am bit confused that which one go 1st and then next.
Please give your few words for this so that I can start configure the system....
I hoping for positive feedback...
Thanks in Advance.
Safi
Edited by: Safi on Aug 31, 2011 2:00 PM

We have roughly 8 servers in our distributed prod environment. We are using red linux for everything but the epma and report server which you need a windows server. The way we installed was to start with the base server with Shared services and establish that one and whatever else you want on that server. From there it really didnt matter as you go through the installs it will ask you where your shared services box is located. The only problem we had was that some of our boxes are behind a WHI cage where we had to open up ports. Other then that i really didnt follow a specific sequence of installation after shared services. Hope that helps.

Switch configuration distributed environment

Hi
I have ISE 1.2 and catalyst 2960
Please I nedd a document of controller and switch configuration exemple in distributed environement (primary and secondary ISE MNT PSN)
Thanks

https://supportforums.cisco.com/docs/DOC-18325
http://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_sw_cnfg.html
https://supportforums.cisco.com/docs/DOC-18121

How to Uninstall SQL instance on active-passive SQL server , which failed during Cluster Setup (Error-Failed at Validate Active Directory Configuration)

How to Uninstall SQL instance on active-passive SQL server , which failed during Cluster Setup (Error-Failed at Validate Active Directory Configuration)
active-passive SQL server cluster setup failed due to some steps missed in initial cluster setup,
now i have unistall sql instance from nodes,
Your help will higly appriciated.
Regards,
Anish
Asandeen

Hello,
Please refer to the following link about remove a node of SQL Server Failover Cluster Instance:
http://msdn.microsoft.com/en-us/library/ms191545.aspx#Remove
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Configuring CWA in distributed environment

Could you please elaborate the process how CWA works in distributed environment?

Thanks Neno for your response....
To implement CWA in distributed environment, we need to add Subject Alternative Names in the Certificate.
I have already gone through the steps given in BYOD design guide, but my concern is if I would by Third party CA certificate for ISE, in that case how would I able to achieve the same.
http://www.cisco.com/en/US/docs/solutions/Enterprise/Borderless_Networks/Unified_Access/byoddg.html
Would I need to ask Certificate vendor to add Subject Alternative Names? Will they do that?

User information on HFM cluster/server configuration

Hi Folks,
How to find which HFM Cluster/Server is accessed by the end user (who use workspace or smartview to work). Because there are many end users out of which some them face low performance and for others work fine.We use two application servers under a cluster.
For ex:
If an end user logins through workspace or smartview,I need the particular application server(under cluster) which responds him.
Thanks & Regards,
Prem

Folks,
The user accessing the HFM server/cluster can be found in Hyperion workspace itself under the option "Consolidation user on system".
Regards,
prem.

SAPehpi and Windows distributed environment

Hi, We have Windows platform with Oracle databases in distributed and high-availability environment.
I have tried to install EHP1 for PI 7.1. I have used SAPehpi as described in installation manual. SAPehpi will stop
when querying database information. It uses brtools and this will fail because Oracle is another server and you cannot
use brtools in primary application server os-level.
SAPehpi should be started on primary application server as described in manual. But the instructions how to use tool
in distributed environment just give information about microsoft cluster SCS and ASCS handling. I need to know
howto use this tool with remote Oracle database.
Why I can't just use SAINT and JSPM, I don't need slow and complicated tools like this. I don't need shadow instance
because just building up the systems.
Do I have to install temporary PAS instances to database server to get this work? Any experience using this tool
on distributed env?
BR. Jari

> My question was actually criticism againts this new tool. SAINT and JSPM were working fine in already installed and configured
> SAP systems.
Yes - you're right - but they require a HUGE downtime since the whole system must be locked as the first runtime step of SAINT is started; depending on the speed of the system and the number of packages you'd have downtimes of two days or more; this is fine for test- and/or qa-systems but it's not for production systems.
> Now this SApehpi tool doesn't work in current installation without changing configurations.
SAPehpi is basically nothing else than a SAPup - so a real upgrade (as if you'd upgrade e. g. from 4.6c to ERP 6.0 or from XI 3.0 to PI 7.1).
I agree with you that the communication of that fact was not clear, one can get the impression, that the installation of EHP1 is the same as a support package installation. It is not, it's a real upgrade of the system requiring lots of additional work.
> We have already configured DBAcockpit via SAP gateways because remote shell was not wanted to use.
I see.
> But I haven't found a way to tell SAPehpi how to use gateway for brtools. Solution cannot be that I have to
> change SAP supported installation just to get EHP1 installed.
>
> I think this tool is released without proper testing.
That tool was basically used for all upgrades that have been done since 2.x (R3up, SAPup) and is now "renamed" to SAPehpi. The Java upgrade functionality was integrated, former combined upgrades required two upgrade programs (SAPup and SAPJup) running and synchronizing at the same time.
I understand your problem - I'm not aware of any way to tell SAPehpi to use the RFC or gateway functionality to connect to the database; I suggest you write an email to "EHP-TECH at SAP dot COM", maybe those guys and girls have an idea how to do that.
EHP1 for PI 7.1 is a system upgrade, not a support package installation.
Markus

Managed to make run EPM 11.1.2.1 in a distributed environment?

Hi,
please see blow...
so far the installation and configuration worked well.
However, in shared services under the essbase node there are no applications available .
The same is when I try to priovision a user (for apps).
Can someone give me a hint how to take a closer look to solfe the problem.
Evething else seems to work fine. Essbase is up an running and it's accessible via the EAS console.
Thank you in advance!
Andre
Hi all,
a more general question:
Has anybody successfully managed to make run EPM 11.1.2.1 in a distributed environment?
If yes - please let me know it, just to give me a littel bit of hope.
I have tried to install and config a EPM 11.1.2.1 like this:
All Servers Win208R2.
1. Http and J2EE Server
2. Essbase Server
3. Others Server
4. RDBMS-Server (Repository)
However the the OPMN process on the essbase server does not start and thus I cannot go the next steps in my install/conifg process.
Thank you in advance and best Regards.
Andre
Edited by: andreml on May 17, 2011 9:47 AM
Edited by: andreml on May 17, 2011 9:50 AM

Hi Pablo,
Thanks for your inputs
- I am a bit familiar with F5's BIG/IP load-balancing methods - round-robin, least connections mode and dynamic ratio - while intelligently supporting session persistence.
- We can also manage load balancing via the WebLogic Admin console, and as you have noted by the OHS as well - which I am not familiar with...
This is a newbie question - wouldn't having 3 different agents managing load-balancing complicate things..? As the WebLogic server sits on top of the OHS, I guess they work together to provide load-balancing and configuring the WebLogic for clustering/load-balancing should affect the OHS configuration as well. Is this how it works at the high-level or is it more complicated?
The EPM System Configurator creates the required cluster and adds servers to the cluster when we deploy the Web applications in the final step of the configuration. So we need not manually configure WebLogic for clustering. But when and where does one configure load-balancing..?
Thanks again.. Essbase infrastructure is indeed a vast topic as it is interesting... :)

HFM Cluster configuration is failing in distributed environment

Similar Messages

Maybe you are looking for