HFM Data Form in Smart View - Improper Suppression

We have several data forms that are opened by a group of controllers every month to load forecast information to HFM. This data form is opened by all of these users in Excel and submitted back to HFM via Smart View.
We have instructed all of the users to turn off ALL suppression while working with the data forms because there are some invalid intersections for ICP based on the input entity. The form is rendering properly for all users but one. When he opens the data form it appears to show all of the lines, but then once it fully loads, it is removing/suppressing one line that is an invalid intersection. In checking his Smart View options, I can clearly say that he does not have ANY of the suppression options in use.
Has anyone experienced this issue? Are there any workarounds? Why would this only happen for one user when 10 others have no issue when using the same file/form/options?
Your help is appreciated, as always!
Scott

Hi Scott,
If this is only for one user, I doubt something wrong in his profile.
Ask your IT to have his profile recreated to see if the issue disappears.
Hope this helps,
Thank you,
Charles Babu J

Similar Messages

  • Data Forms in Smart View - Add Members

    We have data forms with Add Member functionality. When opening that data form using Smart View it puts red border around top member but then instead of allowing user to select a member it lists all of them in the rows. A good example is ICP data form where user can select partner to report balance. The data form online allows selection of individual partners but when same data form opened in Smart View it lists all 1,000+ ICP True entities.
    Is syntax different when data form to be used with Smart View?
    We have V11.1.1.3.

    You have to suppress no data/zeros in SmartView and refresh the form to see the rows collapsed. I had created an enhancement request for this and it is currently under review by development. I would suggest you do the same if you'd like to see this fixed.
    The bug is listed as 13878488 - SUPPRESS ROWS IS NOT ENABLED WHEN OPENING FORM IN SMARTVIEW

  • Error entering data in a data form using Smart View

    One of my user is facing an issue while entering data in a data form through Excel, if she uses the same data form in workspace she is able to enter data. She is facing the issue while entering in a specific column, for all other columns she is able to enter data in the data form. It is only one column for which she is facing issue while using smart view/excel and not workspace, as in workspace she is able to enter data.
    Thanks,

    Hi
    Check they have the "Data Form Write Back from Excel" role in Shared Services.
    See p.133 of the security guide for more info -
    http://docs.oracle.com/cd/E17236_01/epm.1112/hss_admin_1112200.pdf
    Regards
    jpr

  • Some users not seeing all of a web form in Smart View Excel 11.1.2?

    I am on Planning 11.1.2 and I have an end user who, when he opens a web form in Excel using Smart View, he only sees about 1/3 of the entire form. If in the Oracle/Planning web, the form is fine. When he uses my machine, he sees the entire web form in Smart View Excel. Is there a setting on his Excel I need to change?
    Thanks.

    It's a limitation, if you will, of the way JDeveloper works. It essentially runs your JSF page in order to get the rendering. At design time, the phase listener is obviously messing things up since you're not in a proper secured environment - hence the workaround to bypass your phase listener at design time.

  • Error opening form in Smart View??

    I have recently installed smart view client on my machine.
    After establishing connection,if I am opening a form in smart view it is giving something:
    Response contains following unexpecyed tags(s):cellcolor

    * Was the form created by editing another existing form, and saved using the 'Save as' option?
    * Do the forms have Dynamic Time Series (DTS) members displayed in the columns or rows?
    * Do these forms have '&' in the form name?
    HTH-
    Jasmine.

  • Can we display attributes when opening a form in smart view

    Hi Everyone,
    If a form has attribute members in a row, the web view displays the attributes, but smart view doesn't. Is this a bug?
    Thanks,
    Sayantan

    Hi Kiran,
    I am not quite sure about what you meant actually. I simply have a form which has some attributes for each member in rows. I can see the attributes for in the web view. However, when opened in Smart View, the attributes are not shown (the columns themselves are missing).
    Can you please explain in detail? It would be really helpful if I can find an answer to this.
    Thanks,
    Sayantan
    PS: Why would a user need to create an ADHOC query for viewing a form in Smart View?

  • Problem opening form in Smart View

    We are using 11.1.1.3. When viewing a Planning form in the Workspace, I choose File->Open in Smart View. This works for some forms but not others. Excel is launched but nothing happens. Am I missing a form setting? Any help would be appreciated.

    * Was the form created by editing another existing form, and saved using the 'Save as' option?
    * Do the forms have Dynamic Time Series (DTS) members displayed in the columns or rows?
    * Do these forms have '&' in the form name?
    HTH-
    Jasmine.

  • How to Add a new Currency in HFM Data form and grid (Rates)

    Hi Gurus,
    Am very new to this forum.
    Can someone explain me how to add a new currency to the existing data for or grid in the Workspace.
    Regards,
    Vinod

    Hi Sandeep,
    To add a new currency in Metadata, just add in Currencies dimension, and to add in Data form-just send the script what you are using as of now for rest of the currencies, or follow the same steps as specified above. or just add the script A#CLORATE.w#Periodic.C2#XYZ in rows of your data form (where XYZ- is the new currency).
    To add a new location in FDM login to FDM web client- click on Metadata--> locations and select the Controls review location where you want to add the data load location, right click and add the new location.

  • Access Issue Smart View

    Hi all,
    Few user in our company are having hard time opening Data forms in Smart View. When they try to open the forms they get an following Error:
    The data Form XXXX Is invalid.Check Log for details. (where XXXX is the name of form).
    I have tried following steps to fix the problem but was unable to do it:
    Created a Native ID and assigned it similar access as these Users had and was able to open the forms successfully via Smart View using this ID.
    The important thing is these users are from differnt groups and have access to different applications but the provision to all the group is same.
    There are other User in the same groups who are able to open the forms successfully and have same provision as the users that are facing the issue.
    I also tried to pull these users out of the group and provision them with the access they were having from group but after setting this up they had same error while opening the form.
    There is no problem with the istallation of Smart View on their local machine as they are able to login via Native User login i created.
    It would be great help if anybody could suggest a way to Fix this issue.
    Thanks In advance!!

    Hi Abhishek,
    I have not provided the access to the remaining dimensions. That is why it is showing as the No Access.
    Thanks for the help.
    Regards,
    Stally.

  • Formulas in data forms

    I am working with Excel 2007 and Smart View 11.1.2. I open a data form in Smart View and put a simple formula (=10+10) in one of the cells. 20 shows in the cell and when I submit the data, the 20 gets passed to Planning, which is correct. The problem is that I cannot delete the formula or overwrite it with something else. If I type over it with another number (lets say 10), it just reverts back to the formula (=10+10). I have saved the sheet, closed and re-opened and still have the same issue. Once the formula is in the sheet, should we be abelt o simply overwrite it with another formula or just different data? Thanks.

    Yes you should be able to overwrite it and I am pretty sure this is a bug that has been addressed in 11.1.2.1. The work around it to put in a different formula. For example if you want it to have =10+10 in the cell and want 10 in the cell then do =10. This should work...

  • Import/Export Data Forms in SmartView 11.1.2

    Hi,
    Can we Import and Export Planning Data Forms using Smartview in 11.1.2? I know there is Offline Data Form, but is there an option of Exporting and Importing planning Data Forms using Smart View in 11.1.2?
    Regards,
    SG

    No, I don't believe you can import/export forms using SmartView.
    However LCM is available and is pretty painless:
    http://download.oracle.com/docs/cd/E17236_01/epm.1112/epm_lifecycle_management/apgs04s05.html
    Regards,
    Cameron Lackpour

  • The data Form is invalid. Check log for details.

    Hi All,
    I am getting the following error, when I try to open a form.
    The data form 1. Current Year Forecast Input Form is invalid. Check log for details.
    Could you please let us know the path of the log file.
    Thanks & Regards,
    Sravan Kumar.

    Hi,
    If you want to know what patch release you are you, then log into planning directly and click help > about
    The latest patch is :- 7229787 — You cannot open a Planning data form in Smart View, if in Planning preferences, the property for Indentation of Members on Page Display is set to Indent based on hierarchy.
    I believe John was referring to this bug which was resolved in patch 9.3.1.1.6 :-
    7229787 — You cannot open a Planning data form in Smart View, if in Planning preferences, the property for Indentation of Members on Page Display is set to Indent based on hierarchy.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Smart View Vs Web data form entry

    Hi
    I am currently developing a planning model that is due to be rolled out a number of non finance users.
    I find entering data on a web form quite time consuming and not very user friendly. For example when scrolling across left to right the screen doesnt automatically scroll with you.
    I have seen that on smart view data can be entered on a form using excel however the worry is here various spreadsheets could be saved all around the place losing the benefit of entering the data in one source.
    Has anyone had any experience of rolling out smart view to non finance users?
    Thanks

    We're just about to roll out an application with and have demonstrated both the Web Forms and Smart View methods of submitting data. Most of the data will be consolidated using various offline spreasheets so the desire for our users is to copy and paste large blocks of data rather than enter them directly onto the Web Forms/Smart View forms. Some of our forms have 100's of rows so for this reason Web Forms aren't really an option given the time it takes to copy and paste a block of data from spreadsheet A to Web Form B. The difference was 1 minute (spreadsheet>Web Form) vs 1 sec (spreadsheet > Smart View Form) for some forms.
    As soon as we demoed both methods, this was confirmed, the users started to think of ways they could link their backend spreadsheets to the Smart View forms for ease of submitting data. Early indication is that most users will save a copy of their relative forms on the local machines as a template. They will then use this template to consolidate the data from the external spreadsheets offline. Once they are ready to submit, they intend to copy the whole block from the template into a fresh retrieve of the form for submission.
    We haven't looked into offline forms due to the concerns we had with users creating links between the offline form and multiple external spreadsheets. We're just not sure at this point whether it is possible or suitable. It is very unlikely that any values will ever be keyed directly into the form.

  • Date in smart view

    Hi,
    I am not able to enter date in smart view by double clicking on the cell as we do in data forms.
    Can you help me figure out why it is not happening in smart view???
    I opened a form from smart view planning connection and entering the date.
    Thanks,
    Sourabh

    Hi,
    You should write code in order to obtain this,
    If v_date is your date field.
    In the porgram logic you check for v_date+4(2)
    If g_date+4(2) = '01'.
    concatenate g_date6(2) 'JAN' g_date0(2) into g_date.
    elseif g_date_4(2) = '02'.
    concatenate g_date6(2) 'FEB' g_date0(2) into g_date.
    elseif...................
    then display g_date.
    Regards
    Madhu G S
    Reward Points if usefull

  • In Hyperion Planning, smart view does not work

    In Hyperion Planning, when viewing the form , the link icon to Smart View (to view the data in Smart View) at the top of the screen does not work.
    When I clicked on smart view icon on the top of the screen, Excel opened but there were no connection showed in excel and not able to forms in smart view.
    Please assist ASAP. Any one can pls help me on this issue.

    Can any one pls help me ASAP with this issue?

Maybe you are looking for