HFM downgrade help

hi everyone,
we are having some issues with HFM 9.3.1 and some of the functionalities, that were working fine on HFM 9.2 seem to have problem with 9.3.1. Does anybody have some idea about downgrading from 9.3.1 to 9.2? what do i have to back up and how? in brief. Any help is appreciated.
Thanks in advance.
Rob.

How many servers are involved?
Is it a production or Test System?
Are you bothered about your reports/Data? Or can you reload these in?
I have never seen anyone wind back from HFM 9.3.1 to 9.2 I do not know if much changed in the database Schema, but if you ran EPMA against your application in 9.3 its going to be harder to go back. Do you have valid backups of your databases and 9.2 BIPlus repositories (File and Database)?
Would you be happy to export your data from 9.3 and then load this into your old 9.2 application? or are you looking at migrating all your existing databases/repositories from 9.3 to 9.2? I do not think thats a supported thing to do :(.
Can you share with us what is not working correctly in 9.3.1 for example?

Similar Messages

V11 Errors in Consolidations (HFM) - Please Help!

Hi, I'm hoping someone will be able to help.
We have a HFM v11 Application, that we have migrated from v9.2.
We seem to be getting 2 errors when we run consolidations, within the system messages. The consolidations seem to complete OK.
This is the 1st.
Error Code:{657DECA8-A7C6-4EE9-BAD8-B68105744A8B}
System Message Summary
Error executing VBScript Microsoft VBScript runtime error, Line 1665:Type mismatch: '[string: ""]'.
System Message Details
Error Reference Number: {657DECA8-A7C6-4EE9-BAD8-B68105744A8B}
Num: 0x80042fc2;Type: 1;DTime: 24/01/2012 09:08:53;Svr: EUROPEVUK301;File: CHsvScriptEngine.cpp;Line: 392;Ver: 11.1.2.1.000.3082;
Num: 0x80042fc2;Type: 0;DTime: 24/01/2012 09:08:53;Svr: EUROPEVUK301;File: CHsvDSCalculate.cpp;Line: 640;Ver: 11.1.2.1.000.3082;DStr: Microsoft VBScript runtime error, Line 1665;
This is the second.
Error Code:{CC0E1DF2-9310-464D-A967-1B2048B91AEB}
System Message Summary
An Unknown error has occurred
System Message Details
Error Reference Number: {CC0E1DF2-9310-464D-A967-1B2048B91AEB}
Num: 0x80020101;Type: 0;DTime: 24/01/2012 09:08:53;Svr: EUROPEVUK301;File: CHsvVBScriptImpl.cpp;Line: 597;Ver: 11.1.2.1.000.3082;DStr: Executing Sub NoInput(); DISPID=10;
In our previous 9.2 appliction, these errors didnt appear.
Any help in deciphering these would be appreciated.
Thanks & Regards,
Buster

' All entries for a scenario should be NoInput for all years before the first scenario year
sScenarioList = Hs.Scenario.List("", "[Base]")
For Each sScenario in sScenarioList
   If sScenario *=* "ACTUAL" And sScenario *=* "TEST_ACTUAL" Then   *I assume you manually typed this and forget the = signs?*
      If FIRST_YEAR < FirstYr_of_Scenario(sScenario) Then
         For iYear = FIRST_YEAR to FirstYr_of_Scenario(sScenario) - 1
             Hs.NoInput "S#" & sScenario & ".Y#" & iYear
         Next
       End If
    End If
next--> For iYear = FIRST_YEAR to FirstYr_of_Scenario(sScenario) - 1
You are attempting a numerical operation (i.e. -1) on a variant/string. vbscript will attempt to automatically convert the result of the call to FirstYr_of_Scenario to a numeric value; however, if it cannot convert it, you will get an error as described previously.
I would check the function out as it is probably returning "" for some reason. (Write the output of that call to a log file or something)

HFM config help! PLZ

Hi friends
I have installed HFM, shared services, Reporting and Analysis and -reporting and analysis UI IN xp I HAVE 2 GB RAM AND 2.4 GHZ PROCESSOR
I need help for HFM configuration utility.
i have hard time and don't understand where exactly i need to link the below sources
APPLICATION SERVER
1) C:\Hyperion\FinancialManagement\Server Working Folder
WEBSERVER tab
web directories
1) webservice installation directory
2) file transfer directory
3) URL for      1) financial reporting,
          2) web analysis,
          3) planning,
          4) HAL translation manager URL and fianlly
          5) financial data management URL
PLEASE DO HELP ME TO CONFIGURE THIS APPLICATION.

APPLICATION SERVER
1) C:\Hyperion\FinancialManagement\Server Working Folder
This is the folder where all of your database files for each application will be stored. You will need to specify a datalink file in the next field down entitled “Database link file.” This will be a .UDL file if you are using Windows Servers.
WEBSERVER tab
web directories
1) webservice installation directory
2) file transfer directory
These are the webroot directories that correspond to your IIS virtual directories (file location for your website)
3) URL for 1) financial reporting,
2) web analysis,
3) planning,
4) HAL translation manager URL and fianlly
5) financial data management URL
Depending on which application and web servers you chose, these URL’s and port numbers should already have been configured in the Configuration Utility after the installation, so unless you are using HAL or FDM, you shouldn’t have to supply a URL here. If you haven’t configured them, you should do so in the Configuration Utility at Start | Programs | Hyperion | Foundation Services | Configuration Utility and not here.

IPhone 3G 4.2.1 Downgrade help

Hi please help me...
I recently updated my iPhone to 4.1 and accidentally updated the baseband, thus losing my unlock... I then had to resort to updating to 4.2.1 to update my BB to 6.15.00. I then decided that 4.2.1 was too slow for me and decided that I wanted to downgrade to 4.0, or if possible 3.x. I did shift+click restore in iTunes, but the bar restore bar on my phone stops at about 95% and will not move any longer.
Please help, I need the phone to go on a business trip and this is the only phone I have.
Thanks

SpringRolled wrote:
Hi please help me...
We would if we could, but we can't as stated in the above posts. Try Google.
SpringRolled wrote:
I recently updated my iPhone to 4.1 and accidentally updated the baseband, thus losing my unlock... I then had to resort to updating to 4.2.1 to update my BB to 6.15.00. I then decided that 4.2.1 was too slow for me and decided that I wanted to downgrade to 4.0, or if possible 3.x. I did shift+click restore in iTunes, but the bar restore bar on my phone stops at about 95% and will not move any longer.
Yeah, try Google, but it may really be messed up. I would try to just return to iOS 4.2.1 but iTunes will return errors as it will run into issues with the updated baseband. If you got this far you either have some clue of what you are doing or just followed instructions for something you shouldn't have done. Just search google, not here.
SpringRolled wrote:
Please help, I need the phone to go on a business trip and this is the only phone I have.
I would not rely a hacked iPhone for business. Other than the issues you have sun into with upgrading and the baseband; hacking the iPhone can lead to vulnerabilities in the security of iOS. You are potentially letting hackers have free access to the information on your iPhone.

S580 downgrade help ! Lenovo support really exists ?

Hello, i have a s580 smartphone and i did the mistake of updating it from 4.3 to 4.4 and now everything is a mess. Lag, is unresponsive , bad touchscreen and the list can go on.
I was looking for a solution from lenovo support but it seems that nobody can help me to revert this phone to it's original state to android 4.3 as it was two months ago when i bought it.
If anybody can help me with a tutorial on how to downgrade and a stock rom 4.3 please , i will be grateful ! You can't really use the phone like that...
Lenovo support is non existent...it exists only by the name !

Hello, I found stock firmware here http://lenovo-forums.ru/topic/9588-lenovo-s580-прошивка-s022-141019-row-sd/You must register to download file, for translation use google chrome. Download file, put it on external SD card. Reboot to rocovery. From recovery do factory reset and wipe cache. Next apply update from sd card. Thats All. I try latest update S580_S111_150713_ROW, but same bugs as in prev. version. retur back to 4.3.

Firmware downgrade helped - for what it's worth

For quite some time now I experienced problems with my WDS Airport network at my home office (Airport Extreme base and Airport Express remote - NAT provided by OS X Server 10.3). My MacBook Pro would have problems staying connected to my Airport network. Kept on disconnecting, or showed that it was connected, but couldn't see any of the Airport base stations. Very strange.
I also noticed that it must have had something to do with my neighbors' wireless networks around me. It seemed that whenever a neighbor's wireless network came online it bumped me off.
Anyway, after experimenting with WEP, WAP and WAP2 encryptions, as well as with Open network settings only with access control list I gave up. My MacBook Pro Core 2 Duo simply couldn't stay connected.
So I started digging around a bit and I found posts that described similar issues for others with other computer models like Power Book G4, iMac, etc. Now, my Power Book G4 never had any issues staying connected to my Airport network (used to anyway).
I read in one of the posts that it may have something to do with the Airport Extreme (V5.7) and Express (V6.3) Firmware updates. So I decided to take the plunge backwards and downgrade my Airport Extreme/Express Firmwares to V6.1.1 for Express and V5.5.1 for Extreme.
The downgrade went ok. Initially I had no connection (I guess because my last setting used WAP2 which is not available for the older Firmwares, so the config file was not the right format), but after resetting my Airport Base Stations to WAP I had connection.
At night I put all of the computers on the Airport Network to sleep. In the morning I woke my Mac Book Pro from sleep only to discover that no Airport Network was available.
So I logged in to the Airports from the server and pretty much tried everything. Set it to WEP 40, WEP 128, back to WAP encryption.. nothing worked (non of the computers on the Airport Network were able to connect anymore). So I finally gave up and had to settle for an open network without encryption, only access control list and closed network, and guess what. It worked. All computers can once again connect to the Airport network, and no matter what goes on with my neighbors and their networks I can stay connected. Putting the Mac Book Pro to sleep, waking up.. connected. No more disconnects now for the last 24 hours. I know it's too soon to tell.
But it seems that there may be some sort of problem with the latest Airport Firmware upgrades. Downgrading must have destroyed something though, because now none of the encryptions are working anymore.
If anyone has any idea on what I could do to solve this issue, that would be appreciated. Should I try to hard reset both base stations? Maybe that would do the trick?
Also, could it be that I may have copied old files with the migration assistant that belong to the PowerPC Airport drivers? Maybe that is messing things up. Anyway, have no clue.
All in all, I am happy with my Airport network, but not being able to have encryption worries me a bit. Also the speed leaves room for improvement. I have never seen my Airport network go faster than 12 Mb/s (of a theoretical 54Mb/s ... wow).
Anyway.. just thought I would throw this out there and see if someone has anything to contribute.
Mac Book Pro C2D 17" Mac OS X (10.4.8) iPhone needs a cam in the front

I feel your pain. Started logging on this morning with our computers (once we got power back on from a broken pipe) and man is it a mess. My wifes MacBook Pro wont remember our ABES network, nor will it show up. If we select other from the drop down airport icon and manually type in the name and password it is fine until we shut it down or restart it.
Unfortunately, my daughters newer iBook G4 cant even find our network, however, it will find other networks floating around the neigborhood. Go figure!
My sons snow G3 iMac this morning is having the same problem as my daughters laptop.
Our G4 iMac has no problem at all getting on the network and/or remembering it and automatically connecting to it when restarted/shutdown.
My Toshiba M35 laptop cant find the network but will find others and connect to them.
My 2 Dell Inspiron 5100 (one with an internal and another with a Belkin PCMCIA wireless) both connected to the base stattion with no problems.
Now, isnt that weird or what? We have soft reset the AEBS several times as well as hard reset with the same results as above. Anybody have any ideas?
Thanks,
Sean
P.S. This is after we have been running the current network/setup for about a year with no hiccups. Got to love apple and its firmware upgrades!

WRT54G v8.2 downgrading help

I want to downgrade my router to v3. It's new, so it doesn't have dd-wrt or other stuff. How can I do it?
I would really appreciate if someone could give me step-by-step instructions since i'm a novice in this kind of stuff.
Thanks in advance!

You cannot downgrade the version of your router...You can only downgrade the firmware and it does not change the version...Your router will remain version 8.2 only...

HFM Installation help

I have installed in my PC
1. Essbase
2. Planning
3. Reports
4. HFM
While configuring HFM
--> HFM Config utility
Under Application Server Tab :
I gave Dcom User Info : domain user name : Admin
Password : Password
confirm Password : Password
============================================
Application Security :
============================================
Creator Group : Everyone
Admin Group: Blank ( I didnt given any thing).
=================================================
working folder and database Link
=================================================
C:\Hyperion\FinancialManagement\Server Working Folder
Database Link File : UDL:
Provider tab:
============
I have chosen for microsoft OLEDB Provider For SQL Server
Connection Tab:
==============
1. Select Enter User name: admin (System name)
2. Enter info to logon to the server
2.1. use windows NT integrated security
2.2. Use a Specific user name and password
I have chosen 2.1 because, I am unable to chose 2.2. option as
per HFM installation document. I have selected one database from the select database option
After that I am moving to Application server clusters
Am getting this error :
There must be a valid database connection in order to set Application server
clustering. Please check and apply working UDL.
Could you pls suggest me how to come out from this step?

On the connection tab for your .UDL file, have you clicked the Test Connection button to make sure the connection details specified in the .UDL are working?

GE70 Win8 downgrade help

Hello, Don't know if I'm in the right place but I just got my GE70 20E and I want to install windows 7 on it, I have a authentic copy.
And I just don't want to make any mistakes. Could someone give me a guide on how I downgrade to win7 and have it setup properly after it? Just to be sure I downloaded all the things from the website Bios/drivers/firmware/utility
But do I need anything else?
Have a screenshot of everything installed atm.
I may be a noob but I don't want to ruin it before I get to use it properly :P

Quote from: Jamez;99839
Hi esmorax,
I'm not an expert but usually these blue screens indicate a hardware failure of some sort. I thought I would post a message to maybe tease out a bit more information so that maybe someone with more expertise might be able to diagnose or have seen this before.
Have you upgraded any hardware recently? RAM or Graphics card? ::: Maybe installed incorrectly/loose/badly pasted.
Was your NB getting hot or struggling to run Deus Ex before it crashed? ::: overheating/ Graphics card crash.
Regards,
Jamez
Hi Jamez,
I haven´t touched the hardware of my NB ever since I got it. Only software e.g. drivers updating etc.
Well, I played the first 30 mins or so fine. When I ALT+TAB to look something up on browser and ALT+TAB back, it started lagging bad. few seconds after I got the Blue Screen :s
As I recall, the temp on CoreTemp said something like 68°C when Deus Ex was running. But I doubt that wouldn´t cause a Graphic card crash, would it?
Might it have something to do with the CPU or so? And what does the text on the screen exactly mean? "The BIOS in this system is not fully ACPI compliant"
Regards,
esmorax

[solved] sever jittering in games could a video driver downgrade help?

hello today i updated my system and it installed new graphics drivers {ib32-nvidia-utils 334.21-2 x86_64} and i think a new version of wine well after that i decieded to play a game {warframe , which runs on wine with steam} and immedately after the game would jitter like crazy i mean the game works but its very hard to play with the jittering so i was wondering would downgrading fix my issue because im almost certain the update is the culprit so what do you think and if i should downgrade how would do this. Thank you for my time
--peace
Last edited by LinuxPatriot (2014-03-09 21:30:30)

ok thx i just did some looking around the forum and it seems there may be a bug with the new nvidia drivers so ill so how it goes!
Last edited by LinuxPatriot (2014-03-09 07:54:14)

10.4 Downgrading Help

I need to install Pro Tools on a Mac Mini, so I need to downgrade it from 10.5 to 10.4 because Pro Tools LE doesn't run on 10.5. When I run my installation disc (10.4.6) and try to run the installer, it tells me that it isn't compatible. When I go to the Startup Disc and try to select that disc, it does not see it as a startup drive. When I visited the developer site, it told me that I needed 10.4.5 or higher to run the Mac Mini, so my 10.4.6 disc should work fine.
http://developer.apple.com/DOCUMENTATION/HardwareDrivers/Conceptual/Macmini_0602 /Articles/architecture.html
But even if I start up holding the C key, I can;t get it to boot from the CD. Any ideas?

synthetic wrote:
I need to install Pro Tools on a Mac Mini, so I need to downgrade it from 10.5 to 10.4 because Pro Tools LE doesn't run on 10.5. When I run my installation disc (10.4.6) and try to run the installer, it tells me that it isn't compatible. When I go to the Startup Disc and try to select that disc, it does not see it as a startup drive. When I visited the developer site, it told me that I needed 10.4.5 or higher to run the Mac Mini, so my 10.4.6 disc should work fine.
http://developer.apple.com/DOCUMENTATION/HardwareDrivers/Conceptual/Macmini_0602 /Articles/architecture.html
But even if I start up holding the C key, I can;t get it to boot from the CD. Any ideas?
There is no downgrade per se. You have to erase the HD and then install Tiger from scratch.
You most likely have to use the Leopard DVD to erase the HD; the Tiger CD is probably not recognized as a bootable system.
Why not install Tiger on a separate bootable HD as many have and run Pro Tools on the external drive? That way you don't have to kill the Leopard and when DigiDesign gets their act together, you can install it on the Leopard platform.
I have a bootable clone of Tiger on my external HD, It was my backup when I installed Leopard. It still boots and runs fine. Dual-booting is a better way than to toss out a perfectly good OS.

HFM Rule Help

Hello all,
I'm trying to write a rule in the Calc sub which would essentiall accomplish the following:
Entity(“Apple”).Account(“AR”).ICP(“Banana”) has data of 100
I would like to flip the ICP and Entity combination using the Calc subroutine and set the following:
Entity(“Banana”).Account(“AP”).ICP(“Apple”) to 100
I am a novice with HFM rules commands, but advanced in programming and vbscript. I've tried to use HS.EXP to accomplish, but I guess it can't be used with an entity member on the left side of the equation. HS.SETDATAWITHPOV is promising, but I can't find a sample piece of code that uses it effectively.
My last attempt was to populate an array with base entity and icp members for the account I wanted...then match that in my calc sub. Still having trouble. It doesn't look like it should be this difficult.
Any ideas?
Thanks!

hello
here is a sample of setdata...
If CurCustom1 = "INC" Then HS.SetDataWithPOV "A#P487000.I#[ICP None].C1#MVT" & ".C2#" & CurCustom2 & ".C3#" & CurCustom3 &".C4#ARET11", Data , True
You shoul also have look to data unit
regards

ITunes Downgrade - Help

Can anyone tell me where I can download an older version of iTunes? I can't seem to find it anywhere. Thanks a lot.

You current library will not work with an earlier version of iTunes.
You can re build your library from your xml library file using the method here:
http://support.apple.com/kb/HT1451
Or you can look for a back up library in the previous iTunes libraries folder. These backups are made when you upgrade, and the name includes the date.
See this link about something slightly different. It tells you how to use a backup library:
http://support.apple.com/kb/TS1967?viewlocale=en_US

Having a problem installing hfm from yaourt

im trying to install hfm-net-sv a fah montioring program, and im having problems, i have tried downloading the pkg build manualy and running makepkg , but i still get the same error:
[mark@markspc hfm]$ yaourt hfm-net-svn
1 aur/hfm-net-svn 20-1 (1)
Folding@Home monitor written in .NET/mono
==> Enter n° (separated by blanks, or a range) of packages to be installed
==> ----------------------------------------------
==>1
==> Resuming previous build
==> Downloading hfm-net-svn PKGBUILD from AUR...
--2010-05-15 22:24:37-- http://aur.archlinux.org/packages/hfm-net-svn/hfm-net-svn.tar.gz
Resolving aur.archlinux.org... 208.92.232.29
Connecting to aur.archlinux.org|208.92.232.29|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 790 [application/x-tgz]
Saving to: `hfm-net-svn.tar.gz'
100%[============================================================================================================>] 790 --.-K/s in 0s
2010-05-15 22:24:37 (310 MB/s) - `hfm-net-svn.tar.gz' saved [790/790]
bsdtar: Removing leading '/' from member names
x PKGBUILD
First Submitted: Fri, 05 Jun 2009 02:19:03 +0000
hfm-net-svn 20-1 : Folding@Home monitor written in .NET/mono
( Unsupported package: Potentally dangerous ! )
==> Edit PKGBUILD = [Y/n] ("A" to abort)
==> ----------------------------------------------
n
==> hfm-net-svn dependencies:
- mono (already installed)
- subversion (already installed)
- monodevelop (already installed)
==> Continue the building of hfm-net-svn = [Y/n]
==> ----------------------------------------------
==>y
==> Install or build missing dependencies for hfm-net-svn:
==> Building and installing package
==> Yaourt has detected previous hfm-net-svn build. Do you want to use it (faster) = [Y/n]
==> ----------------------------------------------
==>n
==> hfm-net-svn dependencies:
- mono (already installed)
- subversion (already installed)
- monodevelop (already installed)
==> Determining latest svn revision...
-> Version found: 180
==> Making package: hfm-net-svn 180-1 x86_64 (Sat May 15 22:24:46 BST 2010)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
==> Extracting Sources...
==> Removing existing pkg/ directory...
==> Entering fakeroot environment...
==> Starting build()...
At revision 180.
==> SVN checkout done or server timeout
==> Starting make...
MonoDevelop Build Tool
Loading solution: ./HTMLparser2.sln
Loading solution: ./HTMLparser2.sln
Loading projects ..
Building: HTMLparser2 (Release)
Building Solution HTMLparser2
Building: HTMLparserLibDotNet11 (Release)
Performing main compilation...
/usr/bin/gmcs /noconfig
"/out:/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-buil
d/HTMLparser2/bin/Release/HTMLparser.dll" "/r:System.dll"
"/r:System.Data.dll" "/r:System.Xml.dll" /nologo /warn:4 /optimize+
/codepage:utf8 "/define:TRACE" /t:library
"/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HTM
Lparser2/AssemblyInfo.cs"
"/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HTM
Lparser2/DynaString.cs"
"/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HTM
Lparser2/FastHash.cs"
"/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HTM
Lparser2/HTMLchunk.cs"
"/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HTM
Lparser2/HTMLentities.cs"
"/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HTM
Lparser2/HTMLheuristics.cs"
"/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HTM
Lparser2/HTMLparser.cs"
"/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HTM
Lparser2/TagParser.cs"
Compilation succeeded - 4 warning(s)
/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HTML
parser2/HTMLparser.cs(948,53): warning CS0219: The variable
`iLastCurPos' is assigned but its value is never used
/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HTML
parser2/HTMLparser.cs(902,37): warning CS0219: The variable
`iQuadBytes' is assigned but its value is never used
/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HTML
parser2/HTMLparser.cs(166,22): warning CS0414: The private field
`Majestic12.HTMLparser._bDecodeEntities' is assigned but its value is
never used
/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HTML
parser2/HTMLparser.cs(183,22): warning CS0414: The private field
`Majestic12.HTMLparser._bDecodeMiniEntities' is assigned but its value
is never used
Build complete -- 0 errors, 4 warnings
MonoDevelop Build Tool
Loading solution: ./HFM.Setup.sln
Loading solution: ./HFM.Setup.sln
Loading projects ..
WARNING: ./HFM.Setup.sln(4): Unsupported or unrecognized project :
'/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HFM
.Setup/HFM.Setup.wixproj'.
install: cannot stat `/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HFM/bin/Release/HFM.exe': No such file or directory
install: cannot stat `/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HFM/bin/Release/*.dll': No such file or directory
install: cannot stat `/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HFM/bin/Release/CSS/*': No such file or directory
install: cannot stat `/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HFM/bin/Release/XML/*': No such file or directory
install: cannot stat `/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HFM/bin/Release/XSL/*': No such file or directory
==> ERROR: Build Failed.
Aborting...
Error: Makepkg was unable to build hfm-net-svn package.
[mark@markspc hfm]$
any help will be appricated, thanks, mark

I think this should be posted in the aur section...
Have you tried asking the maintainer?

Postfix-3.0.0-3 doesn't start

After upgrade, postfix-3.0.0-3 doesn't start.
output of journalctl -xe:
Mär 26 22:58:27 arch64-d.xxx.de systemd[1]: Starting Postfix Mail Transport Agent...
-- Subject: Unit postfix.service has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/li … temd-devel
-- Unit postfix.service has begun starting up.
Mär 26 22:58:27 arch64-d.xxx.de postfix[1952]: Postfix is running with backwards-compatible default settings
Mär 26 22:58:27 arch64-d.xxx.de postfix[1952]: See http://www.postfix.org/COMPATIBILITY_README.html for details
Mär 26 22:58:27 arch64-d.xxx.de postfix[1952]: To disable backwards compatibility use "postconf compatibility_level=2"
Mär 26 22:58:27 arch64-d.xxx.de postfix[1952]: fatal: /usr/lib/postfix/postfix-script: No such file or directory
Yes, the file is missing.
Anyone else with this issue?
I filed a bug report:
https://bugs.archlinux.org/task/44360
Downgrading helps.
Last edited by Dieter (2015-03-26 22:15:01)

I am getting the same thing, seems the update moved /usr/lib/postfix/postfix-script to usr/lib/postfix/bin/postfix-script
Downgrading fixes it, but its not a "fix"
https://bugs.archlinux.org/task/44354 is the bug report but its closed, "works for me" is the reason.
As the comment states we need to update our config files.
Since there is a new config file, makes sense, and as usual for me I requested repoen like an idiot. Sigh.
update your main.cf in /etc/postfix/ there will be a pacnew.
What you want to do is change daemon_directory from usr/lib/postfix to usr/lib/postfix/bin this will fix it.
Last edited by Toje (2015-03-27 02:23:08)

HFM downgrade help

Similar Messages

Maybe you are looking for