HFM Reconfiguration Errors

Hi
I am trying to reconfigure Shared services,HFM,BIUI since IPs were changed in the organisation.
I am facing the following error while opening application:
Required application module hfm.appcontainer is not configured. Please contact your administrator.
I ve configured with system name and ip also.
Can anyone help?

All I know is that multiple consolidations kick off by different users. They are consolidating at the same senario but different entities. But they need to see these consolidations rolled up to see their numbers.

Similar Messages

Hfm.appcontainer error

Hi,
After configuring 11i for HFM I cannot connect to HFM via the Workspace. I get an hfm.appcontainer error. I would usually refer to the HFM.CONF file to rectify this but this file doesn't seem to exist with 11i. Any help would be appreciated.
Thanks
G

I assume that you still have the first problem described in your first posting, i.e. that the HFM system described in your second point is reinstalled (and overwritten).
So if you have tried my first suggestion and still you don't see the consolidations option in the navigate menu, then you may re-run the full configuration of Hyperion Reporting and Analysis. Make sure you select all the options (Register with SS, Product Options, Configure Database, Configure Financial Reporting, Deploy to Application Server and Configure Web Server). You will have to stop serveral services before you proceed, i.e. Workspace, Financial Reporting Web Application and Web Analysis, in order to release ports. After the configuration is complete, make sure to start the appropriate services (or even better restart your system to play it safe).
KN

HFM service error.

Dear All,
I am using HFM 11.1.1.3 version.When I try to start "DME LISTENER" service,got the following error.
"oraOLEDBPUS10.dll - The module could not be found" I can able to see this dll file in the following location "oracle/db1/bin/...dll".
Any one could help me for this?
Thanks in Advance

Don't need to reinstall the oracle client just reconfigure the Oracle client (i.e Oracle service). now try connecting the oracle server from the client.
If this doesn't work just restart the oracle service and the Hyperion services in the correct order.
Hope this is helpful.
Nick

Register HFM Adapter Error

have tried to register the target adapter for HFM (FM11X-G5-E) in FDM 11.1.2.1 I get an error message 76 Path not found? I copied the dll file into both the Adapters folder and SharedComponents folders. Does anyone know how to resolve this issue?

Copy the entire "AdapterComponents" folder that was extracted from the adapter .zip file to the Oracle\Middlware\EPMSystem11R1\Products\FinancialDataQuality\SharedComponents directory
Login to the application using the workbench client on the FDM application server
Choose File > register adapter and open the SharedComponents\AdapterComponents\fdmFM11xG5E\fdmFM11xG5E.dll file

HFM Consolidation Error

The popped up window for consolidation is neither progressing from 0% to 100% nor throwing any error at that time
Error come when running consolidation all through Workspace.
Error tracked from HFM Error Log Viewer-->Hyperion\products\FinancialManagement\Consultant Utilities
1.File: HsMemory.cpp Version: 11.1.1.3.0.2413 Line: 372 Error: (-2147467259)(0x80004005)(Unspecified error).
2.Failed in HeapReAlloc() while allocating 136400000 Bytes. GetLastError() returned: Not enough storage is available to process this command.
And many more errors like these.
PL Suggest

thanks for replying..
No this issue doesn't persists from Day one.We were able to do consolidation.
There were a few updates to my system,I am mentioning them:
Patch apply:
1.Patch no:6880880-10.2 version for updating opatch version 10.2.0.5.1
2.Patch no:9314073
The above two mentioned patches are the prequisite to apply PATCH 10051655,,We havent applied this patch as of now ,because after applying patch no 9314073 we cant see the changes in workspace.
Now once again to resolve our consolidation error we have applied the patch fix 11.1.1.3.50 but still there is no consolidation.
Still it shows the same error.
pls suggest

HFM APP error when loading security file

Good Day, I am getting this error whenloading security file in HFM APP. User not found with identity=native://DN=cn=0a3b0f123e6a9b46:1f9eca5f:10f110fd853:-7d24,ou=People,dc=css,dc=hyperion,dc=com?USER File: Version: 9.2.0.0.1077 Line:-1 Error: (-2147216700)(0x800412C4)(User not found with identity =native://DN=cn=0a3b0f123e6a9b46:1f9eca5f:10f110fd853:-7d24,ou=People,dc=css,dc=hyperion,dc=com?USER)File: CHsxDSSecurity.cpp Version: 9.2.0.0.1077 Line: 6859 Error:(-2147216700)(0x800412C4)() File: CHsxSecurity.cpp Version:9.2.0.0.1077 Line: 2307 Error: (-2147216700)(0x800412C4)() File:CHsvSecurityAccess.cpp Version: 9.2.0.0.1077 Line: 3980 Error:(-2147216700)(0x800412C4)() File: CHsvSecurityLoadACM.cpp Version:9.2.0.0.1077 Line: 2864 Error: (-2147216700)(0x800412C4)() File:CHsvSecurityLoadACM.cpp Version: 9.2.0.0.1077 Line: 535 Error:(-2147216700)(0x800412C4)() Anyone seen this before. Thanks Azmat Bhatti

If you have your application built using MSAD, then you an load the file the way you built it above, however because you're using the NativeDirectory, you need to create the user in the Directory(HSS) first. Once the user is created, you can then go through and use the .sec method to assign access/roles, but the actual user creation can't be done through a load file.
One of the easiest reasons to understand why this can't be done is that when you load the .sec file, you're not setting up a password for the user.

HFM System Error (URGENT)

Hi All,
I am confronting an error in HFM 9.3.1. This is a system log error.
The error is "*_Error: The maximum calculation limit of 5 was reached_*."
I am unable to guess what the reason may be.
I tried to go in Hyperion Reporting and search for any formulae error but was unable to find one.
Can anyone please suggest what could be the possible cause of such type of error?
Regards,
SN

Hi,
A similar issue is resolved, please check the below thread:
Re: HFM CONFIGURATION
Hope this helps,
Thank you,
Charles Babu J

Average function in HFM returning error

Hi
I have written the following script in HFM calculate routine for calculation of averages. But it gives me an error.
Has anyone used this function and can point out the error in this please?
SUB SUBSaVG
HS.EXP "A#AverageSales = " &Average ("A#Sales","3")
END SUB

As far as I know (still on HFM 4.X!), HFM doesn't have a predefined average function. You will need to define a new function in your rules as shown below. I got this from tech support a while back. The parameters are a little different to what you have in your example so you may have to tweak. Is the "3" in your example the period number?
Function Average(strPOV,strFreq)
     DIM nPERIOD
     DIM strCUM
     DIM i
     If strFreq="PERIODIC" Then
          If HS.PERIOD.ISFIRST=TRUE Then
               nPERIOD=1
          Else
               nPERIOD=2
          End If
     ElseIf strFreq="YTD" Then
          nPERIOD=HS.PERIOD.NUMBER()
     Else
          EXIT FUNCTION 'Nothing to do -
     End If
     For i = 0 To nPERIOD -1
          If i= 0 Then
               strCUM = strPOV &".W#PERIODIC"
          Else
               strCUM= strCUM &"+"& strPOV &".W#PERIODIC.P#CUR-"&i
          End If
     Next
     Average = "(("& strCUM &") / "& nPERIOD &")"
End Function

Sporadic HFM database errors

We have recently upgraded to HFM 11.1.2.3. Every few days we get the errors in the HFM logs that says "Recreated the ADO Connection", "Table Already Exists ,BR." and "Failure occurred while executing InternalGetCalcStatusForAllBasePeriods, retrying operation" When this occurs users are not able to run smartview retrievals or FR reports. The HFM front end application while it typically opens up users cannot run anything in HFM. The only way to get HFM back up is stop all services, Kill connections to the HFM database (if any exist after the stop) and restart services. There is no issues with the back end sql server database as when the issue occurs I can connect and query without any issues. This has become a significant issue as users get interrupted in production when this happens. Oracle support has been of very little help. Any thoughts/ideas on where to look. Thanks in advance.
---------------------------Solution---------------------------------
Finally after a few months of observation and trial and error we figured out the cause of this, with no help from Oracle support I must add. When we configured HFM we had upped the maximum pooled connections to 200 from the default 40. This was the cause of our issues. The Oracle doc says that this can be increased to 400 but obviously there is a bug somewhere with pooling more connections.

Hi there,
Have you also changed the Processes, Sessions and Open Cursors of the database?
Regards,
Thanos

Unable to run a star schema in HFM. Error message below.

We are currently unable to run an existing star schema in our HFM 9.3.3 application. This has never caused an issue in the past and is causing a disruption in our montly close process.
Any assitance would be greatly appreciated!
I've attempted to delete the Star Schema but still receive same error message.
Error message below:
Thank you,
Brian Riedel
==================================================================================================================
8/1/2012 1:34:24 PM : Status : Extracting Metadata
Metadata update has failed. : (-2147220903) (Attention: One or more processes are currently using the Star Schema specified by the DSN and Prefix. You must wait until all other processing is completed before attempting to create the specified Star Schema.)
Processing status change: (-2147220903)
Data processing failed. : (-2147220903) (Attention: One or more processes are currently using the Star Schema specified by the DSN and Prefix. You must wait until all other processing is completed before attempting to create the specified Star Schema.)
8/1/2012 1:34:24 PM : Status : Processing completed with errors
Extended Analytics export completed with errors for Application BSCPROD using Label PL. Error code is:

The message means another process has a lock on the EA tables, so you have to wait until that processis complete before proceeding. This could happen if you are trying to execute more than 1 concurrent EA exports.
--Chris

When exporting data from FDM to HFM getting error - Error: Adapter function [fConnect] failed

Hi ALL!!!
I am trying to Export Data from FDM to HFM and clicked "Export" option and getting below error.
Error: Adapter function [fConnect] failed.
Detail: Stacktrace:
upsWBlockProcessorDM.clsBlockProcessorClass.ActLoad(strLoc[String], strCat[String], strStartPer[String], strEndPer[String], strFile[String], objLoadParam[Object&], blnNoRaiseEvents[Boolean], lngMarshalType[Int32])
Hyperion.FDM.Dialogs.TargetSystemLoadDialog.buttonOK_ServerClick(sender[Object], e[EventArgs])
And followed the John suggestions through this Link (http://epm.jonhwilliams.com/adapter-function-fconnect-failed-fd/), All the checks are good, But still issue has not been resolved.
Could some one please suggest your valuable inputs.
Thanks,
RSV

Can you check if the integration options "Use SSO" and "Enable Sticky Server" are set to on?

HFM Configuration Error - URGENT

Hi there,
I'm trying to configure HFM (11.1.2 on windows). I'm able to configure all things (DCOM, WEBSERVER...) but can't configure the database.
When it gets to the database portion of the configuration, I see the following error message on the config logs created by the EPM System Configurator:
[2010-12-23T17:39:52.296-03:00] [EPMCFG] [WARNING] [EPMCFG-02084] [oracle.EPMCFG] [tid: 57] [ecid: 0000IoKxNUVApI1Fzv7U801D4utF00000i,0] [SRC_CLASS: com.hyperion.hfm.config.hfmregistry.HFMRegistry] Error while configuring HFM Database: java.lang.StringIndexOutOfBoundsException: String index out of range: -1
[2010-12-23T17:39:52.296-03:00] [EPMCFG] [ERROR] [EPMCFG-05020] [oracle.EPMCFG] [tid: 57] [ecid: 0000IoKxNUVApI1Fzv7U801D4utF00000i,0] [SRC_CLASS: com.hyperion.hfm.config.HfmDbConfigurator] Error: Error while configuring HFM DatabaseString index out of range: -1
[2010-12-23T17:39:52.296-03:00] [EPMCFG] [ERROR] [EPMCFG-01020] [oracle.EPMCFG] [tid: 57] [ecid: 0000IoKxNUVApI1Fzv7U801D4utF00000i,0] [SRC_CLASS: com.hyperion.config.wizard.impl.RunAllTasks] Error: [[
com.hyperion.cis.config.ProcessingException
     at com.hyperion.hfm.config.HfmDbConfigurator.configure(HfmDbConfigurator.java:164)
     at com.hyperion.config.wizard.impl.RunAllTasks.executeDbConfigTask(RunAllTasks.java:753)
     at com.hyperion.config.wizard.impl.RunAllTasks.execute(RunAllTasks.java:322)
     at com.hyperion.config.wizard.impl.RunnAllTasksState.run(RunnAllTasksState.java:89)
     at java.lang.Thread.run(Thread.java:619)
Does anyone have any idea?

Hi,
A similar issue is resolved, please check the below thread:
Re: HFM CONFIGURATION
Hope this helps,
Thank you,
Charles Babu J

HFM Rule Error

Hi,
My Account dimension is as follows -
A#B - Parent
--A#C - Child1 (Input)
--A#D - Child2 (Input)
--A#E - Child3 (Input)
--A#F - Child4 (Shared parent member)
--A#G - Child5
--A#H - Child6
Child5 and Child6 hold intermediate values
Now I'm trying to calculate the following inside a data unit loop in the sub calculate
(pseudo code)
opendataunit ("")
For i =0 to NUMitems
Checks the UDA for every account
If UDA is XYZ then HS.EXP A#G =A#G +Data (where Data contains the value returned in the data unit)
elseif UDA is BQY then HS.EXP A#H = A#H +Data
endif
HS.EXP A#B = A#F - (A#C + A#D + A#E) -A#G +A#H (problem line)
Next
Now my problem is that the the rule file is on the second last line. After validation, returns an error saying A#B is an invalid destination. The dataunit loop runs fine and I have tested it by commenting out the second last line and run the calc.
Could you please give me pointers as to why i could be getting this error ? I'm new to HFM so any pointers will be appreciated.
Thanks in Advance!!

Hi,
In HFM, only a base member can be the destination of a calculation expression. A parent is always the sum of its children.
Regards,
--Kostas

HFM configuration error

Hi,
While configuring HFM on windows machine,I performed following steps Shared services configuration which succeeded then after essbase I moved on to HFM
In that I was able to configure database,DCOM but configuration fails while configuring application server and cluster.
When I see the error log it says ID dispatch error 1557.
Kindly help me with suggestions.

Enter DCOM user-id and password in the application configuration and also enable DCOM.

HFM Web Error

Hi evreybody,
I'm experiencing a very strange problem.
Even if I hadn't load metadata or ruels HFM starts to return me an error message every time I try to launch a report, open a datagrid, access proccess control and every HFM object.
Pleae find here below the error message:
++ Unspecified error Table already exists. An unknown error has occurred in the HsvDSData2 object. An unknown error has occurred in the HsvDSData2 object. Error Reference Number: {376FC0AA-D6D1-4BA4-9947-E87A2BD8EBF7};User Name: Burlando@Native Directory Num: 0x80041b05;Type: 1;DTime: 3/30/2011 4:05:39 PM;Svr: LVZH9P-BPM;File: CHsvDSCalcStatus.cpp;Line: 2549;Ver: 9.3.1.0.1502; Num: 0x80004005;Type: 1;DTime: 3/30/2011 4:05:39 PM;Svr: LVZH9P-BPM;File: CHsvDSCalcStatus.cpp;Line: 7104;Ver: 9.3.1.0.1502;DStr: Failure occured while executing InternalGetCalcStatusForAllBasePeriods.; Num: 0x80041b05;Type: 1;DTime: 3/30/2011 4:05:39 PM;Svr: LVZH9P-BPM;File: CHsvDSCalcStatus.cpp;Line: 7117;Ver: 9.3.1.0.1502; Num: 0x80041b05;Type: 0;DTime: 3/30/2011 4:05:39 PM;Svr: LVZH9P-BPM;File: DataHelperClasses.cpp;Line: 604;Ver: 9.3.1.0.1502; Num: 0x80041b05;Type: 0;DTime: 3/30/2011 4:05:39 PM;Svr: LVZH9P-BPM;File: CHsvDSData2.cpp;Line: 3996;Ver: 9.3.1.0.1502; Num: 0x80041e80;Type: 1;DTime: 3/30/2011 4:05:40 PM;Svr: LVZH9P-BPM;File: CHsvDSData2.cpp;Line: 1724;Ver: 9.3.1.0.1502; Num: 0x80041e80;Type: 0;DTime: 3/30/2011 4:05:40 PM;Svr: LVZH9P-BPM;File: CHsvData.cpp;Line: 5044;Ver: 9.3.1.0.1502; Num: 0x80041e80;Type: 0;DTime: 3/30/2011 4:05:40 PM;Svr: LVZH9P-BPM;File: CHsvData.cpp;Line: 4372;Ver: 9.3.1.0.1502; Num: 0x80041e80;Type: 0;DTime: 3/30/2011 4:05:40 PM;Svr:+
I really don't know what it can depends on...
Please Help me!!!!
Kind regards
Giacomo

you need to not use HFM 9.3.1.0.... (which was released in August 2007)
assuming you have an oracle support contract, download and apply Patch Set Update 9.3.1.4 for HFM at a minimum or better still upgrade to 9.3.3 (July 2010) or an 11.1.2.x release.
more information on this error is in KM 736125.1 in Oracle's support site.

HFM Reconfiguration Errors

Similar Messages

Maybe you are looking for