HFM server/cluster registration failed

Hi,
I have everthing installed and configured, except for the HFM server/cluster registration failed. Can anyone help point me in the right direction?
Mike

Try below steps ..I got it fix using the same.
Thanks to Pablo for the solution
Posts: 106
Registered: 04/07/11
 Re: Failed To Register Cluster Containing Server <Server Name>: Idispatch Error
Posted: Jan 18, 2012 11:47 AM in response to: Mike in response to: Mike
Click to report abuse... Click to reply to this thread Reply
Start->Run and enter dcomcnfg. On the component services app open Component Services->Computer->My Computer right click "My Computer" and select Properties. Go to the Default Properties tab and verify that you have "Connect" for Default Authentication Level and "Identity" Default Impersonation Level.

Similar Messages

HFM Server / Cluster Registration

Is there any way to run this utility silently? If we are to deploy the client to remote workstations silently i would think there was a away to configure the cluster per workstation as well.
Any input is appreciated.
Thanks.

You could capture the registry entries and DCOM entries.
Usually you only put the HFM client out to a handful of application admin people which would make me wonder why you need to automate it.
Regards,
John A. Booth
http://www.metavero.com

IDispatch error codes 5056, 1590, and 1557 makes hfm Srvr registration fail

I have installed EPM 11.1.1.2 and configured everything successfully except for Financial Management. When configuring Financial Management the Server/Cluster registration fails and I can't deploy to the imbeded App Srvr.
the hfm-config.log file shows the following Failed entries; How do I find out what IDispatch error codes 5056, 1590, and 1557 are?
(Thu Jul 30 17:58:53 2009) Failed to register cluster epm. Line:1438 File: .\CHFMConfig.cpp Error code:0x800415c0 Error: IDispatch error #5056
(Thu Jul 30 17:58:53 2009) Cluster registration failed. Line:1452 File: .\CHFMConfig.cpp Error code:0x80040836 Error: IDispatch error #1590
(Thu Jul 30 17:57:50 2009) Successfully set the user to DCOM limits
(Thu Jul 30 17:57:50 2009) Attempting to register the cluster/server
(Thu Jul 30 17:58:53 2009) Failed to set register Servers and Clusters. Line:536 File: .\CHFMConfigUtil.cpp Error code:0x80040836 Error: IDispatch error #1590
(Thu Jul 30 17:58:53 2009) General Error. Line:827 File: .\CHFMConfigUtil.cpp Error code:0x80040815 Error: IDispatch error #1557

Error Registering server cluster on HFM web server

Hi,
When i am trying to register server cluster , configuration fails and i get following error in EPMWindowsconfig.log
(Wed Apr 06 17:57:48 2011) Starting RegisterServer
(Wed Apr 06 17:57:53 2011) Failed to register server: Access is denied. Line:3809 File: .\CEPMWindowsConfig.cpp Error code:0x80070005 Error: Access is denied.
(Wed Apr 06 17:57:53 2011) Failed to register server SERVERNAME: IDispatch error #1553
Please let me know if any one has solution for the above issue.
Thanks,
Bhargav

Hi,
I Don't know your version
here is a detailed way to do the same:
Hyperion Financial Management - Version: 9.2.1.0.00 and later [Release: 9.2 and later ]
Error
Failed to register server: Access is denied.
Line:3809 File: .\CEPMWindowsConfig.cpp Error code:0x80070005
Error: Access is denied.
Cause
Windows Server Group Policy settings for DCOM block the HFM registration to Shared Services.
Solution
HFM requires full access for ANONYMOUS LOGON in DCOM Limits Configuration.
This can be set up as follows:
Open DCOM configuration console: run 'dcomcnfg' from Run or Command Prompt
Open up Component Services / Computers
Right Click on My Computer and choose Properties
In the Launch and Activation Permissions, click the Edit Limits button
This button may be disabled using Windows Security Policy. To enable this button the following Windows registry keys must be removed:
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\DCOM\MachineAccessRestriction
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\DCOM\MachineLaunchRestriction
Once these keys are removed and the system restarted you can use the above steps to add ANONYMOUS LOGON in the Edit Limits section. Once this is done, open Configuration Utility and register HFM to Shared Services.
Follow step by step,
tell me if it doesn't work
J

Server/Cluster is incorrectly configured. Please reconfigure your Cluster.

Dear All,
We are facing the below issue while opening the reports from workspace/Smartview.
Server/Cluster is incorrectly configured. Please reconfigure your Cluster or Server connection. Server/Cluster is incorrectly configured. Please reconfigure your Cluster or Server connection
The FRLogging log is as below.Kindly let us know the solution.
[2012-10-16T11:12:47.168+05:30] [EPMFR] [NOTIFICATION] [] [oracle.EPMFR.performance] [tid: main] [ecid: 0000Jdc65R41FgkLoyG7yY1GVFFC000000,0] [SRC_CLASS: com.hyperion.reporting.util.HRLogTimer] [SRC_METHOD: logTimeEnd] PERF: 0000000000 HrDatasourceManagerImpl fromXml
[2012-10-16T11:12:47.169+05:30] [EPMFR] [NOTIFICATION] [] [oracle.EPMFR.performance] [tid: main] [ecid: 0000Jdc65R41FgkLoyG7yY1GVFFC000000,0] [SRC_CLASS: com.hyperion.reporting.util.HRLogTimer] [SRC_METHOD: logTimeEnd] PERF: 0000000011 HrDatasourceManagerImpl getDatasource
[2012-10-16T11:14:06.723+05:30] [EPMFR] [NOTIFICATION] [] [oracle.EPMFR.performance] [tid: main] [ecid: 0000Jdc65R41FgkLoyG7yY1GVFFC000000,0] [SRC_CLASS: com.hyperion.reporting.util.HRLogTimer] [SRC_METHOD: logTimeEnd] PERF: 0000000066 DesignerManager getPersistentObject
[2012-10-16T11:14:06.738+05:30] [EPMFR] [NOTIFICATION] [] [oracle.EPMFR.performance] [tid: main] [ecid: 0000Jdc65R41FgkLoyG7yY1GVFFC000000,0] [SRC_CLASS: com.hyperion.reporting.util.HRLogTimer] [SRC_METHOD: logTimeEnd] PERF: 0000000000 HrDatasourceManagerImpl fromXml
[2012-10-16T11:14:06.738+05:30] [EPMFR] [NOTIFICATION] [] [oracle.EPMFR.performance] [tid: main] [ecid: 0000Jdc65R41FgkLoyG7yY1GVFFC000000,0] [SRC_CLASS: com.hyperion.reporting.util.HRLogTimer] [SRC_METHOD: logTimeEnd] PERF: 0000000014 HrDatasourceManagerImpl getDatasource
[2012-10-16T11:14:06.840+05:30] [EPMFR] [NOTIFICATION] [] [oracle.EPMFR.performance] [tid: main] [ecid: 0000Jdc65R41FgkLoyG7yY1GVFFC000000,0] [SRC_CLASS: com.hyperion.reporting.util.HRLogTimer] [SRC_METHOD: logTimeEnd] PERF: 0000000000 HrDatasourceManagerImpl fromXml
[2012-10-16T11:14:06.841+05:30] [EPMFR] [NOTIFICATION] [] [oracle.EPMFR.performance] [tid: main] [ecid: 0000Jdc65R41FgkLoyG7yY1GVFFC000000,0] [SRC_CLASS: com.hyperion.reporting.util.HRLogTimer] [SRC_METHOD: logTimeEnd] PERF: 0000000014 HrDatasourceManagerImpl getDatasource
[2012-10-16T11:14:06.851+05:30] [EPMFR] [NOTIFICATION] [] [oracle.EPMFR.performance] [tid: main] [ecid: 0000Jdc65R41FgkLoyG7yY1GVFFC000000,0] [SRC_CLASS: com.hyperion.reporting.util.HRLogTimer] [SRC_METHOD: logTimeEnd] PERF: 0000000001 HrDatasourceManagerImpl fromXml
[2012-10-16T11:14:06.851+05:30] [EPMFR] [NOTIFICATION] [] [oracle.EPMFR.performance] [tid: main] [ecid: 0000Jdc65R41FgkLoyG7yY1GVFFC000000,0] [SRC_CLASS: com.hyperion.reporting.util.HRLogTimer] [SRC_METHOD: logTimeEnd] PERF: 0000000009 HrDatasourceManagerImpl getDatasource
[2012-10-16T11:14:06.862+05:30] [EPMFR] [NOTIFICATION] [] [oracle.EPMFR.performance] [tid: main] [ecid: 0000Jdc65R41FgkLoyG7yY1GVFFC000000,0] [SRC_CLASS: com.hyperion.reporting.util.HRLogTimer] [SRC_METHOD: logTimeEnd] PERF: 0000000000 HrDatasourceManagerImpl fromXml
[2012-10-16T11:14:06.862+05:30] [EPMFR] [NOTIFICATION] [] [oracle.EPMFR.performance] [tid: main] [ecid: 0000Jdc65R41FgkLoyG7yY1GVFFC000000,0] [SRC_CLASS: com.hyperion.reporting.util.HRLogTimer] [SRC_METHOD: logTimeEnd] PERF: 0000000008 HrDatasourceManagerImpl getDatasource
[2012-10-16T11:14:06.981+05:30] [EPMFR] [ERROR] [] [oracle.EPMFR.core] [tid: main] [ecid: 0000Jdc65R41FgkLoyG7yY1GVFFC000000,0] [SRC_CLASS: com.hyperion.reporting.client.HRAdmHelper] [SRC_METHOD: openConnection] [[
com.hyperion.ap.APException: [0] [1033] Native: -2147217085 Error Reference Number: {B4B11526-7EA5-492A-9BB9-C17E33676DF2} Num: 0x80041143;Type: 1;DTime: 10/16/2012 11:14:06 AM;Svr: CPNQHYPNAPZP02;File: CHsxClient.cpp;Line: 809;Ver: 11.1.2.1.000.3082;DStr: CHsxClient::InternalCreateObjectOnCluster: cluster = HFMProdCluster, Num Servers = 0,; Num: 0x80041143;Type: 1;DTime: 10/16/2012 11:14:06 AM;Svr: CPNQHYPNAPZP02;File: CHsxClient.cpp;Line: 810;Ver: 11.1.2.1.000.3082;DStr: CHsxClient::InternalCreateObjectOnCluster: cluster = HFMProdCluster, Num Servers = 0,; Num: 0x80041143;Type: 0;DTime: 10/16/2012 11:14:06 AM;Svr: CPNQHYPNAPZP02;File: CHsxClient.cpp;Line: 3687;Ver: 11.1.2.1.000.3082; Num: 0x80041143;Type: 0;DTime: 10/16/2012 11:14:06 AM;Svr: CPNQHYPNAPZP02;File: HsvADMDriverSessionInternal.cpp;Line: 305;Ver: 11.1.2.1.000.3082;
 at com.hyperion.ap.adm.HssConnRemote.HssConnOpenConnection(HssConnRemote.java:864)
 at sun.reflect.GeneratedMethodAccessor1048.invoke(Unknown Source)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:597)
 at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:305)
 at sun.rmi.transport.Transport$1.run(Transport.java:160)
 at sun.rmi.transport.Transport.serviceCall(Transport.java:155)
 at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:535)
 at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run0(TCPTransport.java:790)
 at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:649)
 at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
 at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:909)
 at java.lang.Thread.run(Thread.java:619)
 at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(StreamRemoteCall.java:255)
 at sun.rmi.transport.StreamRemoteCall.executeCall(StreamRemoteCall.java:233)
 at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:142)
 at com.hyperion.ap.adm.HssConnRemote_Stub.HssConnOpenConnection(Unknown Source)
 at com.hyperion.ap.adm.HssConnSessionRemote.HssConnOpenConnection(HssConnSessionRemote.java:991)
 at com.hyperion.ap.adm.HssConnSessionWrapper.HssConnOpenConnection(HssConnSessionWrapper.java:1484)
 at com.hyperion.ap.adm.HssAdm.openConnection(HssAdm.java:912)
 at com.hyperion.ap.adm.HssAdm.internal_openConnection(HssAdm.java:1789)
 at com.hyperion.ap.adm.HssAdm.openConnection(HssAdm.java:974)
 at com.hyperion.reporting.client.HRAdmHelper.openConnection(Unknown Source)
 at com.hyperion.reporting.client.HRAdmHelper.openConnection(Unknown Source)
 at com.hyperion.reporting.client.DesignerManager.getDatasourceConnection(Unknown Source)
 at com.hyperion.reporting.javacom.DesignerManagerComImpl.getDatasourceConnection(Unknown Source)
Regards,
Suboor

Set up the HFM cluster on the FR Studio machine.
1. Go to Start > All Programs > Hyperion >Financial Management >Server and Web Configuration
2. Go to the Server/Cluster Registration tab.
3. Enter the computer name of the HFM server used to get cluster information or the name of the single server if using a non-clustered environment. The HFM server needs to be referenced exactly as it is on the HFM server (hostname/IP/FQDN/clustername, as well as case-sensitivity for any letters).
4. Apply and OK.
5. Restart FR Studio.
Note: if HFM client is not on the FR Studio box, it will need to be installed prior to set up of the HFM cluster as listed above.

Cluster network name resource 'Cluster Name' failed registration of one or more associated DNS name(s) for the following reason: The handle is invalid.

I'm stuck here trying to figure this error out.
2003 domain, 2012 hyper v core 3 nodes. (I have two of these hyper V groups, hvclust2012 is the problem group, hvclust2008 is okay)
In Failover Cluster Manager I see these errors, "Cluster network name resource 'Cluster Name' failed registration of one or more associated DNS name(s) for the following reason: The handle is invalid."
I restarted the host node that was listed in having the error then another node starts showing the errors.
I tried to follow this site: http://blog.subvertallmedia.com/2012/12/06/repairing-a-failover-cluster-in-windows-server-2012-live-migration-fails-dns-cluster-name-errors/
Then this error shows up when doing the repair: there was an error repairing the active directory object for 'Cluster Name'
I looked at our domain controller and noticed I don't have access to local users and groups. I can access our other hvclust2008 (both clusters are same version 2012).
<image here>
I came upon this thread: http://social.technet.microsoft.com/Forums/en-US/85fc2ad5-b0c0-41f0-900e-df1db8625445/windows-2012-cluster-resource-name-fails-dns-registration-evt-1196?forum=winserverClustering
Now, I'm stuck on adding a managed service account (mas). I'm not sure if I'm way off track to fix this. Any advice? Thanks in advance!
<image here>

Thanks Elton,
I restarted 3 hosts after applying the hotfix. Then I did the steps below and got stuck on step 5. That is when I get the error (image above). There
was an error repairing the active directory object for 'Cluster Name'. For more data, see 'Information Details'.
To reset the password on the affected name resource, perform the following steps:
From Failover Cluster Manager, locate the name resource.
Right-click on the resource, and click Properties.
On the Policies tab, select If resource fails, do not restart, and then click OK.
Right-click on the resource, click More Actions, and then click Simulate Failure.
When the name resource shows "Failed," right-click on the resource, click More Actions, and then click Repair.
After the name resource is online, right-click on the resource, and then click Properties.
On the Policies tab, select If resource fails, attempt restart on current node, and then click OK.
Thanks

Client Install Fails: Log: ClientIdManagerStartup - Server rejected registration request: 3

Trying to install the client onto Windows Server 2008 R2 Servers using ConfigMgr 2012R2. no PKI is being used. We do not see this issue on any workstations, only servers.
It returns the following:
Got registration response from MP. Client approval status: -1
[RegTask] - Server rejected registration request: 3 ClientIDManagerStartup
Actions taken based on other Articles:
1.Delete the c:\windows\smscfg.ini file
2) Run CCMDELCERT on the client
3) Restart the SMS agent Host service.
Result: FAILED, it comes back with the same errors.
MP_RegistrationManager.log shows:
MP Reg: Client in-band certificate is not valid due to failures in certificate chain validation, Raising status event. Failure HR = 0x800b010a, In-band Cert SubjectName = Servername - SERVER
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of MpEvent_CertInvalidChain
ClientID = "GUID:D32A0A76-E832-49B6-A431-084DB435FD83";
DateTime = "20140520175614.768000+000";
MachineName = "Servername.tes.name.com";
ProcessID = 3444;
SiteCode = "XYZ";
SubjectName = "Servername - SERVER";
ThreadID = 17368;
Win32ErrorCode = 2148204810;
MP Reg: Registration request body is invalid.
Any other ideas out there???
David Baur

Do the following to check the SMS self-signed certificates
Start MMC.exe
Add/Remove Snapin -> Select Certificates -> Select local computer
Locate the SMS folder
Find the SMS Signing certificate and SMS Encryption Cerrtificate - check if they have expired. If they have expired - delete them.
Retry client installation

Shared services registration failed in HFM 11.1.1.3

We have installed the following products on the following
servers
1) Shared services server Repository : Oracle 11g installed
in 64 - bit Enterprise Linux.
2) 64 Bit HFM Installation in Windows 2003 Server.
3) Shared services installation done in Windows 2003 32-bit
OS.
4) IIS is up & running in the same (Windows 2003 Server- 64
Bit) where HFM is installed.
5) Also the shared services is accessible by using the URL
( in the Windows 2003 Server- 32 Bit)
**We are facing a problem with during the Web server configuration for HFM & shared services registration.**
the following system installers are also used :
1) V17382-01 (64 BIT SYSTEM INSTALLER)
2) V17397-01 (64 BIT FOUNDATION SERVICES 1)
3) V17369-01 (64 BIT FOUNDATION SERVICES 2)
4) V17370-01 (64 BIT FOUNDATION SERVICES 3)
5) V17372-01 (64 BIT FOUNDATION SERVICES 4)
Thanks in advance!!!

Sorry to have forgotten one more installable:
6) V17365-01.zip ( 64 Bit HFM installable)
Also if the ISS server is running in the 32-bit mode , does it affect the EPM configuration??
How do i check whether the IIS server is running in the 32 bit Mode or 64 - bit Mode.

Adding server in DAG failing with error Error: Cluster API failed: "AddClusterNode() (MaxPercentage=25) failed with 0x800706ba. Error: The RPC server is unavailable

Hi, Below is teh environments
DC: Win 2008 R2 SP1
Exchange Server OS: Win 2012 R2 Std
Exchange : 2013 SP1 Ent
Two Servers with CAS+MB role, already part of one DAG. I am trying to add one new server in existing DAG. The installation of exchange 2013 competed successfully. However when i am adding it to the existing DAG, the below error is coming. Please help
to solve the issue. Thanks in advance.
A server-side database availability group administrative operation failed with a transient error. Please try the operation again. Error: An error occurred while attempting a cluster operation. Error: Cluster API failed: "AddClusterNode() (MaxPercentage=25)
failed with 0x800706ba. Error: The RPC server is unavailable" [Server: cluster owner FQDN]
Manu

Hi Manu,
As Deepak mentioned, please try to enable IPv6 on all member servers first.
Based on my research, In Microsoft Exchange Server 2013, IPv6 is supported only when IPv4 is also installed and enabled. If Exchange 2013 is deployed in this configuration, and the network supports IPv4 and IPv6, all Exchange servers can send data to and
receive data from devices, servers, and clients that use IPv6 addresses.
Please also configure or disable Firewall to allow the connection.
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Mavis Huang
TechNet Community Support

Shadow Copies on 2012 R2 File Server Cluster

Hello all!
I've inherited a two node physical 2012 R2 file server cluster that contains a few SMB shares on a single clustered disk. I'd like to enable shadow copies for this shared disk but want to store the shadow copy data on its own shared disk
as per shadow copy best practices (at least on non-clustered file servers).
I created a second cluster disk, assigned it to the same resources as the SMB clustered disk.
Now historically I've enabled shadow copies through computer management but I want to ensure the shadow copies are cluster aware so in the Failover Cluster Manager I open Storage | Disks and right click the SMB cluster disk and click the Shadow Copies tab.
From the tab I can Enable shadow copies, this sounds like what I'm looking for, unfortunately it does not give me an option to choose a disk/volume to store my shadow copy data, so this can't be right.
My next step was to connect computer management to the cluster virtual server name (NOCFS4) and through the System Tools | Shared Folders | All Tasks | Configure Shadow Copies it shows me the correct number of shares on the SMB cluster disk plus
I can see the Settings button for configuring the location and size limit for shadow copies, however once I tweak the shadow copy location and size settings, click Ok and click Enable to turn on the shadow copies I get a long pause and an error about
not being able to create a schedule. So it seems connecting to the cluster virtual object is not the answer either.
That leaves using computer management to connect to one of the physical server nodes of the cluster. When I open the shadow copy interface on the physical node I note that it shows a 0 for the number of shares it detects on the SMB clustered disk.
This doesn't surprise me since this interface isn't cluster resource aware.
So I'm stuck. Does anyone know the "Microsoft way" to enable shadow copies on a clustered disk while storing the shadow copy data on a second cluster disk both attached to the same cluster resource?

Hi guys
I spotted exactly same problem right now on Windows 2012 R2 with latest updates.
Enabling Shadow Copy via Cluster Manager on disk will enable schedule and snapshots but schedule is not-cluster aware (is created locally on node) and "Previous Versions" are visible only locally but not via shared folders (UNC path accesible by
clients)
When I spotted this behavior I tried different way going via Computer Management and cluster resource name but console always hangs for me when using "Configure Shadow Copies". After many minutes configuration window is opened (Hurray!) but any
action there will hang whole console again. Enabling Shadow Copies will fail with "0x80004005: Unspecified
error" for creating scheduled task but "Next Run Time" column still shows "Disabled". Checking disk resource via Cluster Manager shows it is enabled and ?local? scheduled task is created.
Computer management console still shows DISABLED and any action freezes whole console (only when cluster resource name is used).
This fix I found, unfortunately, is not applicable to 2012 R2 OS: https://support.microsoft.com/en-us/kb/2894464
To sum up there is a major bug in MS implementation in Shadow Copies for Shared Folders when clustering is used or it is still not supported in 2012 R2? Doing it outside cluster works as it should (without freezes and Previous Versions are available via
UNC)
There is no documentation about FileServer Clustering on 2012(R2) unfortunately.
Could someone from MS clarify it?
Many thanks
Filip
EDIT:
Ok, one correction:
Scheduled task is not created in "Failover Clustering" hive of Scheduled tasks as user may expect but failover of fileshare to other node will unregister/reregister it on active node only.

Install Oracle 10g on Windows 2003 Server cluster (MSCS)

Hi all
How do I install Oracle 10g on Windows 2000 cluster (MSCS installed)?
I have a 2-nodes Microsoft windows 2003 server cluster and I want to install Oracle 10g,
Do I folloow this order:
1. Install the software on both without the database
2. Create the database from the first node
in this case, The second node can see the database as it is available?,
and what about the IP adresses?
If you can point me to some documentation, or help in any way, I would appreciate it.
Thanks for any help.

Read here...
http://download.oracle.com/docs/html/A96685_01/intro.htm
>>
Oracle Fail Safe comprises multiple components: Oracle Fail Safe Manager, Oracle Services for MSCS, and server components specific to Oracle Fail Safe.
>>
So I don't know how you can achieve this without Fail Safe.
There might be other link which I cannot find right now.

Can anyone help me?Creating the shadow copies in the file server cluster ,there are some errors occured, OS version is WSS 2012

I construct a failover cluster(file server,AP module) for sharing files by WSS 2012,and I want to use the shadow copies to backup my data,but when making a shadow copies on the volume which is added to the cluster(not the CSV,just add
it to the cluster and use it to share files,it plays the role of file server),there are some errors occured, these errors result in the shadow copies failed,error likes the following pictures:
1: the disk F is added to the cluster,first I make the shadow copies by click the right key of mouse on the disk F,and chouse the configeration shadow copies,and click the settings, then click the schedule , and I wait just a few seconds, the error is appeared,like
this picture 1, the wait operation timed out,and then ,
I click the schedule button once again,a different error occured,like the following picture," the object already exists",if i don't set the schedule at first ,use the default shedule,and click the enable button also the same error must
accure
but the only diffrence is that, a shadow copy time point is created, also ,you can make the shadow copies by click " create now", that is creating the shadow copies manually. Although it can succesfully make the shadow copies, but when I select
a time point to revert, error occured, "A volume that contains operating system files or resides on a cluster shared disk cannot be reverted"
In a word,all the errors above make the shadow copies by schedulling failed,except making the shadow copies manually,but what makes me confused is that I have ever maked the shadow copies succesfully by schedul a policy,I don't know what makes it succesful,
it's small probability, most of time ,it's failed.No matter what kind of situation, revert must be failed.
I'm sorry for my pool english , it's the first time for me getting help in forum by english ,I don't know if I descripe my question clearly, also ,other method like the link
http://technet.microsoft.com/en-us/library/cc784118(v=ws.10).aspx I have tried,but the same errors occured.Can anyone tell me How can I make the shadow copies in File Server
cluster（AP module）？And I make a mistake in operating？ Looking forward for your reply.Thanks!

Hi,
Please check the following 2 places:
HKEY_LOCAL_MACHINE\Cluster\Tasks
C:\Windows\System32\Tasks
First please compare permission settings of the folder C:\Windows\System32\Tasks with a working computer. Correct permission settings if anything wrong. Specifically, confirm you current account do have permission on this folder.
As it said "object already exists", find the schedules you created before, backup and delete all these schedules in both registry key and folder.
Then test to create a new schedule to see if issue still exists.
Meanwhile what kind of storage device you are using? The issue could occur on specific storage device, so test to enable shadow copy on a local disk to see if that will work.
TechNet Subscriber Support in forum |If you have any feedback on our support, please contact [email protected]
Thank you for you reply.On the local volume,all of these errors will not occur, but the volume in the file server cluser.There is no value in HKEY_LOCAL_MACHINE\Cluster\Tasks. On local volume, everything goes well about the shadow copy, so I do not
think something is wrong about the permission settings of the folder C:\Windows\System32\Tasks.Storage device is a SAN,we use RAID6 and provide the LUNs to the NAS engine, and the make the volume on these LUNs, Is Angthing wrong? Hope for you
reply~~

Oracle Calendar Server Configuration Assistant fails with Red Hat ES 4

I am trying to install Oracle Collaboration Suite 10.1.2 on a Red Hat ES 4 server platform.
I have installed with the Advanced Installation Option. The infra installation proceeds well then when i try to install the ocs application tier (different Oracle Home) the Calendar Server Configuration Assistant fail.
Output :
================================================================================================================
Output generated from configuration assistant "Calendar Server Configuration Assistant" (attempt 1):
Time zone selected: EBST3EBDT.Warning: Existing node(s) found in unison.ini. Using node 1 for configuration tasks.
Current State for Instance:ocsapp.lf-ocs1.lima_e_falcao.inet
Component Type Up Status In Sync Status
================================================================================
1 HTTP_Server HTTP_Server Up True
2 OC4J_Content OC4J Up True
3 OC4J_Mail OC4J Up True
4 OC4J_OCSADMIN OC4J Up True
5 OC4J_OCSClient OC4J Up True
6 OC4J_Portal OC4J Up True
7 OC4J_RM OC4J Down True(Disabled)
8 OC4J_Wireless OC4J Up True
9 OC4J_imeeting OC4J Up True
10 Service_Component_Cont OC4J Up True
11 home OC4J Up True
Warning: more than one process-type Element in the snippet. only the 1st one is appended
Error: can not append, there is a same named process type element in the exisitng ias-instance.ias-component
Error: Could not configure OPMN module information.
java.io.IOException: /u01/oracle/product/10.1.2/ocs_2/jdk/bin/java returned 1
     at oracle.calendar.server.configuration.OCalConfig.runExternalProgram(Unknown Source)
     at oracle.calendar.server.configuration.OCalConfig.runExternalProgram(Unknown Source)
     at oracle.calendar.server.configuration.OCalConfig.configureOPMN(Unknown Source)
     at oracle.calendar.server.configuration.OCalConfig.run(Unknown Source)
     at oracle.calendar.server.configuration.OCalConfig.main(Unknown Source)
3 [main] ERROR emSDK.config - oracle.sysman.emSDK.conf.TargetAdditionException: Target[oracle_calendar_ocal,ocsapp.lf-ocs1.lima_e_falcao.inet_Calendar Server] already present in /u01/oracle/product/10.1.2/ocs_2/sysman/emd/targets.xml
oracle.sysman.emSDK.conf.TargetAdditionException: Target[oracle_calendar_ocal,ocsapp.lf-ocs1.lima_e_falcao.inet_Calendar Server] already present in /u01/oracle/product/10.1.2/ocs_2/sysman/emd/targets.xml
     at oracle.sysman.emSDK.conf.TargetInstaller.addTargetInt(TargetInstaller.java:1148)
     at oracle.sysman.emSDK.conf.TargetInstaller.addTargetFromFile(TargetInstaller.java:1075)
     at oracle.sysman.emSDK.conf.TargetInstaller.main(TargetInstaller.java:3669)
Target[oracle_calendar_ocal,ocsapp.lf-ocs1.lima_e_falcao.inet_Calendar Server] already present in /u01/oracle/product/10.1.2/ocs_2/sysman/emd/targets.xml
Warning: ocad.conf already included in /u01/oracle/product/10.1.2/ocs_2/Apache/Apache/conf/oracle_apache.conf.
Error: java.io.IOException: /u01/oracle/product/10.1.2/ocs_2/jdk/bin/java returned 1: Registration of ocal_targets.xml into targets.xml failed.unistart: Oracle Calendar Server 10.1.2.0.0
unistart: Copyright (c) 1993, 2005, Oracle.
unistart: All rights reserved.
unistart:
unistart: opmnctl: opmn is already running
unistart: opmnctl: starting opmn managed processes...
unistart: The Calendar Server started successfully.
Orclguest account has already been provisioned for Calendar.
Fatal Exception caught : java.lang.NullPointerExceptionopmnctl: stopping opmn managed processes...
Configuration assistant "Calendar Server Configuration Assistant" failed
================================================================================================================
Someone can help me?
Thanks a lot.

is it a reinstallation or a first one on a bare server ? if there were several attempts please be sure you cleaned evrything before launching the installation :
- product directory
- /etc/ora*
- database
- oraInventory
- /tmp (I had a similar issue with remaining files in /tmp, even after rebooting)
If it doesn't work, check that you don't hit the NO-EXCUTE problem (see the OCS 10.1.2 release notes, look for "noexec")

Listener service not start automatically after reboot in Win2K server Clust

Hi all,
I set up a two node Server Cluster with Microsoft Windows 2000 server cluster service. Hardware are two HP DL380 servers and HP MSA500 (the shared storage). The cluster's IP address is 10.1.241.65. When I shut down both servers and restart the primary server, the listener server service will not start automatically. The listener log is:
Started with pid=1108
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.1.241.65)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
32-bit Windows Error: 49: Unknown error
The service is set up automatically start. I suspect the cluster virtual IP is not available immediately after reboot. So I tried setting the Recovery after first failure and second failure to 3 minitues each, and setting up Dependencies of the listener on the cluster service in the Win2K Service panel. Neither worked.
The service can be manually start.
Any suggestion?
Frank.

The command to start automatically the listener is :
lsnrctl start
check the parameters in : <ORACLE_HOME>/network/admin/listener.ora
check the IP address or host name
Joel Pérez

Cluster Validation Fails on List iSCSI Host Bus Adapters

I have an 8 Node SQL Failover Cluster.
This cluster has been in service for quite some time now, suddenly the Cluster Validation is failing...
When it gets to the "List iSCSI Host Bus Adapters" (which we do no use on any of these nodes) it fails with the error:
"An error occurred while executing the test. There was an error getting information about the iSCSI controllers installed on the nodes. There was an error retrieving information about the iSCSI host bus adapters from node 'node1'. Invalid class "
The test is not performed on any of the other nodes, it just fails.
This is causing a problem when trying to extend SQL to some of the newer nodes that have been added.
I have tried evicting and readding nodes, I've tried uninstalling/reinstalling failover clustering, among other things.
I did notice that on node7, if I attempt validation, and ONLY mention node7, the test will complete on that box only.
Again, we do not even use iSCSI, this is a Fibre Channel cluster. It's just the attempt by the validation wizard to list the iSCSI Host Bus Adapters that do not exist, that is failing....
Any thoughts? I did see a similar post which mentioned having a problem listing Fibre Channel adapters that sounded like the exact same error, but there was no resolution there either...

Hi,
For SQL Server Cluster issues, I suggest discussing them in our SQL Server Disaster Recovery and Availability forum. They are the best resource to troubleshoot SQL Server Cluster issues.
http://social.msdn.microsoft.com/Forums/en/sqldisasterrecovery/threads
Tim Quan - MSFT

HFM server/cluster registration failed

Similar Messages

Maybe you are looking for