HFM system 9 Issue
I installed HFM 9.3 in the Windows XP (SP2) machine with IIS 5.0. Whenever I am trying to log into the page I am getting the following error. pls help
An error has occurred. Please contact your administrator.
Show Details:
Error Number:1
Error Description:Please Relogin. Session has Timed out
Error Source:
Page On which Error Occurred:
Dear,
I have gone through your problem, even i faced it a month back but i worked on it and solved it.
Resolution:
I hope you r trying to install HFM as Server(If yes) then dear Windows XP is not the correct OS.
Kindly go through the 9.3 support matrix guide and the install HFM9.3.0.1/9.3.1.0 on Windows 2003 Standard(SP3) / Enterprise(SP2) / Windows 2000 (SP4).
The error your are facing:
Resolution:(After installing proper OS)
1: Install HFM and required Hyperion Foundation services.
2: then install BI+ and BI+UI services. As you can view the HFM web client only through Workspace in system 9.3.
I hope you got the answer. for any further query revert back to me or u can call me.
Regards,
Abhishek
HFM / Planning Consultant.
Similar Messages
-
Hi All,
I was wondering if anyone could help me with a HFM security issue on HFM 11.1.2.3 we are facing please?
The problem is that a user can by-pass the journal approval stage and post directly after submitting if Custom4 access control=All is selected.
If any of the other access controls (None, Read, Promote) for custom 4 are selected, the first two steps of the process are possible -
input and approval of the journal are possible but final posting of the journal is not and returns an error that says:
"User does not have the access right to perform this journal task"
The options I have thought for a workaround are as follows:
1. 1. Set up a 3rd user called data poster and remove submit journal role from user 1 (data inputter)
2. 2. Put in place process control and use the various review levels (could be quite time consuming given there is no time left for development)
Have anyone experienced this before and come up with a quick way of resolving this please? It would be very much appreciated.
We have two types of users who are associated with groups in HFM and have the appropriate roles assigned to them to complete their tasks,
they are:
1. A data Inputter (who inputs base data and journals, who has access to create and submit journals)
2. 2. A data reviewer (who approves journals)
The process is as follows:
1. 1. Logon as Data inputter to submit the journals
2. 2. Logon as Data reviewer to approve the journals
3. 3. Logon as Data inputter to post the Journals
We are using the custom 4 member to identify different adjustment types. At the moment we are able to set it up in such a way whereby Steps 1 and 2 can be completed
but once it comes back to step 3, we get an error as follows:
"User does not have the access right to perform this journal task"
(This error comes about when the access control on custom 4 is set to None, Read, Promote)
Custom 4 Access Rights looks as follows:
C4_ADJ01
C4_ADJ02
C4_ADJ03
C4_ADJ04
HFMDefault
Read
Read
Read
Read
HFMLoad
All
Promote
None
Read
HFMReview
Read
All
All
All
When Custom 4=C4_ADJ01 all 3 steps can be completed but it by-passes step 2 (journal approval).
For all other Custom 4 we complete steps 1 and 2 successfully but not step 3 due to access issues.
Roles for the groups that users assigned look like the following:
Test User Name
Test User Name
Access Rights
1
Base Data input/Journal Data input
test_HFMLoad
Reviewer 1
Review Supervisor
Create Journals
Read Journals
Database Management
Enable write back in Web Grid
Load Excel Data
Generate Recurring
Post Journals
Create Unbalanced Journals
Manage Templates
Data Form Write Back from Excel
Consolidate
2
Data Reviewer
test_HFMReview
Reviewer 1
Review Supervisor
Create Journals
Read Journals
Database Management
Approve Journals
Consolidate
Reviewer 2
Generate Recurring
Manage Templates
Create Unbalanced Journals
Any help or advice would be much appreciated.
Thanks in advance,
M.Hi All,
I was wondering if anyone could help me with a HFM security issue on HFM 11.1.2.3 we are facing please?
The problem is that a user can by-pass the journal approval stage and post directly after submitting if Custom4 access control=All is selected.
If any of the other access controls (None, Read, Promote) for custom 4 are selected, the first two steps of the process are possible -
input and approval of the journal are possible but final posting of the journal is not and returns an error that says:
"User does not have the access right to perform this journal task"
The options I have thought for a workaround are as follows:
1. 1. Set up a 3rd user called data poster and remove submit journal role from user 1 (data inputter)
2. 2. Put in place process control and use the various review levels (could be quite time consuming given there is no time left for development)
Have anyone experienced this before and come up with a quick way of resolving this please? It would be very much appreciated.
We have two types of users who are associated with groups in HFM and have the appropriate roles assigned to them to complete their tasks,
they are:
1. A data Inputter (who inputs base data and journals, who has access to create and submit journals)
2. 2. A data reviewer (who approves journals)
The process is as follows:
1. 1. Logon as Data inputter to submit the journals
2. 2. Logon as Data reviewer to approve the journals
3. 3. Logon as Data inputter to post the Journals
We are using the custom 4 member to identify different adjustment types. At the moment we are able to set it up in such a way whereby Steps 1 and 2 can be completed
but once it comes back to step 3, we get an error as follows:
"User does not have the access right to perform this journal task"
(This error comes about when the access control on custom 4 is set to None, Read, Promote)
Custom 4 Access Rights looks as follows:
C4_ADJ01
C4_ADJ02
C4_ADJ03
C4_ADJ04
HFMDefault
Read
Read
Read
Read
HFMLoad
All
Promote
None
Read
HFMReview
Read
All
All
All
When Custom 4=C4_ADJ01 all 3 steps can be completed but it by-passes step 2 (journal approval).
For all other Custom 4 we complete steps 1 and 2 successfully but not step 3 due to access issues.
Roles for the groups that users assigned look like the following:
Test User Name
Test User Name
Access Rights
1
Base Data input/Journal Data input
test_HFMLoad
Reviewer 1
Review Supervisor
Create Journals
Read Journals
Database Management
Enable write back in Web Grid
Load Excel Data
Generate Recurring
Post Journals
Create Unbalanced Journals
Manage Templates
Data Form Write Back from Excel
Consolidate
2
Data Reviewer
test_HFMReview
Reviewer 1
Review Supervisor
Create Journals
Read Journals
Database Management
Approve Journals
Consolidate
Reviewer 2
Generate Recurring
Manage Templates
Create Unbalanced Journals
Any help or advice would be much appreciated.
Thanks in advance,
M. -
IMessage is not working on my phone. Is this a system issue or individual phone issue?
My iPhone 4S is not allowing me to send any iMessages. It will say "not delivered" and send as a text. Is this an individual phone issue or system issue? I checked my settings and they are all correct.
According to Apple's status site, http://www.apple.com/support/systemstatus/ nothing is down.
When you go into Settings>Messages, is iMessage activated? Are you connected to data via cellular or wi-fi? Are you able to access the Internet on the phone? What troubleshooting have you tried? -
Mac System Issue pop up window has disabled Safari. Please help?
I clicked on a video on FaceBook & ended up with a pop up that says I have a serious Mac system issue & I need to call this phone number immediately.
I can't do anything at all with Safari now. Has anyone had this issue? Know how to get rid of it? IForce quit Safari and relaunch it with the Shift key held down. If that doesn’t work, disconnect the computer from the Internet and try again.
(115087) -
Hello I just got an Mac Alert systems issue security warning on my screen. I tried getting apple to help me out but they directed with firefox when the problem is Safari. I unistalled Safari and then redownloaded but it still shows up. What do I do
Hello
I tried to relaunch while holding down shift key and it didnt do anything to solve the issue. -
Hello , I ordered the iPhone 6plus 128gb a few minutes before 3am est on Friday morning. I received my conformation email at 530am . As of then every time I try to check order status I receive the following message . We are experiencing system issues, please try again later. Is anyone else receiving this message when checking order status?
Are you seen that message when trying to view your orders from your Verizon account? I have the same issue but if you search your preorder confirmation number and enter you last name here Order Status | Verizon Wireless then it will at least give the vague details like, "your order has been received and is been processed" It will also show the expected delivery date.
-
HT1657 Rented movie, but had to reimage to fix system issue, how can i re download movie
Rented movie, but had to reimage to fix system issue, how can i re download movie
You will need to try contacting iTunes Support and see if they will grant you a re-download of it http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
-
Hi,
We recently installed EAL for HFM 11.1.1.4 in our distributed environment. We are receiving the following error when creating a TESTREG. Any thoughts why we would get this error?
RIMARY KEY (classId,userName))
[2013-Sep-05 07:22:34] Table Created
[2013-Sep-05 07:22:34] Prepare INSERT: INSERT INTO SECCACCESS_1 ( classId, userName, accessRights ) VALUES (?,?,?)
[2013-Sep-05 07:25:36] http://$$$/livelink/Default.aspx?command=readYear&server=$$$&application=CONSOL&domain=
[2013-Sep-05 07:25:36] http://$$$/livelink/Default.aspx?command=readPeriod&server=$$$C&application=CONSOL&domain=
[2013-Sep-05 07:25:36] http://$$$/livelink/Default.aspx?command=readView&server=$$$&application=CONSOL&domain=
[2013-Sep-05 07:25:36] http://$$$/livelink/Default.aspx?command=getVersion&server=$$$&application=CONSOL&domain=
[2013-Sep-05 07:25:37] DSS Application created
[2013-Sep-05 07:25:52] http://$$$/livelink/Default.aspx?command=getICPWeight&server=$$$&application=CONSOL&domain=
[2013-Sep-05 07:48:12] DSS Application Metadata updated with -1 warning(s)
[2013-Sep-05 07:48:12] http://$$$livelink/Default.aspx?command=getDynamicAccountsInfo&server$$$&application=CONSOL&domain=
[2013-Sep-05 07:48:12] IIS Request: Can't connect
[2013-Sep-05 07:48:12] LiveLinkException [HR#09746]: Analytics Link cannot communicate with Financial Management or Analytics Link Connector for Financial Management
ThanksMost of the time HFM connectivity issues are related to ADM driver and cluster configuration.
Are you able to connect using hfm client ? -
Phishing or Apple system issue
I have received about a dozen emails in the past day including 6 in the last hour from Apple . The body of the email is below. Is this phishing or a system issue with Apple. Dear (my name was deleted) To reset your Apple ID password, simply click the link below. That will take you to a web page where you can create a new password. Please note that the link will expire three hours after this email was sent. Reset your Apple ID password > Questions? There are lots of answers on our Apple ID support page > If you weren't trying to reset your password, don't worry – your account is still secure and no one has been given access to it. Most likely, someone just mistyped their email address while trying to reset their own password. Thanks, Apple Customer Support
Hi,
I've been receiving the same message for weeks now, about 5 times a day (varies).
I just ignore and delete them, but they are getting annoying. It would be great if an Apple Rep replied to these posts and let us know whether these messages are legit or not. If they are legit and there a glitch in the system are they working at fixing it?
Getting frustrated!
The message:
To reset your Apple ID password, simply click the link below. That will take you to a web page where you can create a new password.
Please note that the link will expire three hours after this email was sent.
Reset your Apple ID password >
Questions? There are lots of answers on our FAQ page >
If you weren't trying to reset your password, don't worry – your account is still secure and no one has been given access to it. Most likely, someone just mistyped their email address while trying to reset their own password.
Thanks,
Apple Customer Support -
I have a MacBook Pro made in mid 2009. A fully recharged battery dies in about 2 hours. Is this a systems issue or do I have to replace the battery? The battery has about 100 cycles on it.
Try a SMC reset:
https://support.apple.com/en-us/HT201295
If this is an original battery, even with a low cycle count, it is old and probably should be replaced.
Ciao. -
My hp laptop worked fine, I shut down, attempted normal boot process several days later and power boots but the monitori screen stays shut down and inoperable. There was no overheating, physical damage , or system issues. Video graphics card had errors
You would be better off posting this in an HP forum, this forum is for Apple products.
-
Hi All,
I am confronting an error in HFM 9.3.1. This is a system log error.
The error is "*_Error: The maximum calculation limit of 5 was reached_*."
I am unable to guess what the reason may be.
I tried to go in Hyperion Reporting and search for any formulae error but was unable to find one.
Can anyone please suggest what could be the possible cause of such type of error?
Regards,
SNHi,
A similar issue is resolved, please check the below thread:
Re: HFM CONFIGURATION
Hope this helps,
Thank you,
Charles Babu J -
Unable to view HFM System Messages - Very Very Urgent Please.............
I am having issues with seeing Users on system or system messages in release HFM 11.1.2.1 I get a message that *"You do not have the proper access rights to perform this task."* and I ensured that in the configuration the creator group and administrator group are set up as administrators. I have not been able to find anything that I can change security wise.
The details of the error are below:
*" System Messages "*
You do not have the proper access rights to perform this task.+
Show Details:
Error Reference Number: {5F81E0EB-52C5-4C96-8F5A-DD9ECBAE4233}
Num: 0x8004021d;Type: 0;DTime: 5/9/2011 8:32:22 AM;Svr: GITSHYPT01;File: CHsxServer.cpp;Line: 2457;Ver: 11.1.2.1.000.3082;
Num: 0x8004021d;Type: 0;DTime: 5/9/2011 8:32:22 AM;Svr: GITSHYPT01;File: CHsxClient.cpp;Line: 4175;Ver: 11.1.2.1.000.3082;
Num: 0x8004021d;Type: 0;DTime: 5/9/2011 8:32:22 AM;Svr: GITSHYPT01;File: CHFMwManageApplications.cpp;Line: 1060;Ver: 11.1.2.1.000.3082;
*" Users on System "*
You do not have the proper access rights to perform this task._
Show Details:
Error Reference Number: {1B34A605-F996-4CB9-8D7D-30C0A467170F}
Num: 0x8004021d;Type: 0;DTime: 5/9/2011 8:33:36 AM;Svr: GITSHYPT01;File: CHsxClient.cpp;Line: 3857;Ver: 11.1.2.1.000.3082;
Num: 0x8004021d;Type: 0;DTime: 5/9/2011 8:33:36 AM;Svr: GITSHYPT01;File: CHFMwManageApplications.cpp;Line: 1891;Ver: 11.1.2.1.000.3082;
can anyone please assist....?
Regards,
Shan...I believe your user ID is not contained within the group set up in the HFM configuration's "application administrator". This group is independent of the role "administrator" since it is set at the server level, not application level. The same group controls access to the enable/disable connnections, and logout users feature.
--Chris -
A dozen+ Kernel Panics, suspect system issues - what to try?
Hello!
Well, in the last few weeks, my poor little Powerbook has lost its mind. I keep having Kernel panics for no apparent reason. Here's the story so far:
1. I upgraded to Leopard (archive/install) from Tiger, in November.
2. In early January, I had at least one kernel panic. Not sure what happened. By the middle of January, I had 3 or 4, and on (about) the 15th, I had three kernel panics in the span of an hour - and the lower ram card wasn't being recognized. I took it to the Apple store, where the tech said that it was the infamous "lower ram-slot issue" that plague my model Powerbook.
3. Once I got the powerbook back from the shop, it seemed to work quite well - fast, stable, panic-free. This week, however, I've had at least 6 or 7 kernel panics - at least 4 of them in the last 24 hours. A few of these weren't the usual "you need to restart your mac" window, but rather a long list of console-like text from the BSD subsystem itself
It seems to be related to the software - or perhaps Dashboard. Dashboard client has been running out of control this week - and started to go nuts about when the kernel panics started to occur. In fact, one of these "BSD" panics said that the dashboard client hung the computer. Thus, I moved all of my user (non-apple) widgets out of the library folder - effectively removing them from dashboard. This has prevented dashboard client from going nuts, but hasn't stopped the kenel panics. The ones that have occurred since seem to occur when using Safari or MS Word 2004, and one (another BSD panic) said that Window Server hung.
I've repaired permissions many times, used Disk Utility to verify the boot volume (it was OK), and zapped the PRAM and PMU - no luck.
I've had some other hardware and software issues:
First, Spotlight crashes when I attempt to search for something with a common name and have my 4 external hard drives attached... (One with Time Machine backups, one with other backups, and the rest with large volumes of video editing files). This issue probably isn't related to the kernel panic issue though, since it only occurs if I spotlight gets really bogged down - say, I search on "mac" and get 5000 returns...
Sometimes, if I have the power adapter plugged in and then boot up or wake the Mac, it sometimes won't recognize the adapter and thus run off battery. The solution? Unplug the adapter from the Mac and the wall, then plug both sides in. This occurs at least once a day, having become a much worse issue since sending it into Apple. This makes me think that I may have a issue with the power supply system in the Powerbook, and may be one of the causes of the panics. Again, zapping the PMU and PRAM, hasn't helped. Nor has deleting every power-related plist file.
The ram issue seems to have stopped, and I'm not sure the power issue could cause this - so I don't know what to do about this. It's happening a lot, but it's not exactly predictable - it would be difficult to reproduce for the Mac Genius, should I run to the Apple store. Since I suspect it's a software issue, I'm also not sure they can do anything about it. If Apple can't do anything about it, I plan on doing an Erase-install of Leopard, then carefully installing software - one thing at a time - to see if I can find the culprit. If worst comes to worst, I'll downgrade to Tiger...
So then, the questions, summed up are:
1. Do you have any idea what could be going on?
2. Can apple do anything about a software-related kernel panic issue?
3. If Apple can't fix it, and an erase-install won't work, when else can I try?
Sorry for the long post, and thanks a bunch for the help, I appreciate it.
-DanK, well i'll try to find the log on the backup clone I made - the Powerbook is currently in the Apple store for diagnostics. Hopefully, then can figure out what the deal is, but it will likely require an archive/install.
When I was there, he opened one of the logs in console - and it showed literally thousands of errors - all from "kernel". Wow, i have no idea what happened. He said that it may be bit-rot on the part of some of my applications, but there's probably not much they can do if it's not a hardware problem. sigh
Anyway, I'll look for the log on the backup volume when I get a chance. Thanks, I suppose you're right about you being forced to guess without the log. Didn't think about that... O:-) -
DB refresh on Netweaver 7.0 ABAP+JAVA system - Issue
Dear Folks
I am having an issue with starting the Java instance after system copy.
This is the situation
System QAS database was refreshed from system PRD.
Both the systems are on NW 7.0 Ehp1 SP 18, in a HPUX/ORACLE environment.
Our normal landscape is full of R3 systems so teh DBA's have been historically doing DB refresh by copying for teh Oracle fileystems and then renaming the schema and some post db refresh activities to get the DB in teh target system up and running. Pardon my terminologies I ma not a DBA. The abpove procedure has worked fine with R3 systems.
But with the above mentioned Netweaver system ABAP instance is running fine after refresh while Java instance is not since SMSICM-> Goto-> HTTP Server -> DIsplay Data is showing
HTTP Application Server Handler
ABAP Server operational = TRUE
J2EE Server configured = TRUE
J2EE HTTP port =
J2EE HTTPS port =
J2EE Server operational = FALSE
Default root access handler = ABAP
URL Prefix Table loaded = TRUE
There are no other dumps or errors in the system and teh startup logs do not show any error. I have looked up online and the System Copy Guide for 7.0 systems and I understand SAP recommends using sapinst. But I would like to know if there is a workaround to fix the j2ee instance.
I have seen a few forumns where people have had similar issues but no solution.
FYI, The the Instance_IDXXXXX in the SAP J2EE Engine- Config Tool in system QAS is that of PRD and there is no entry for the instance ID of the QAS system.
I have tried changing all the entries that are pointing to PRD under Cluster_Data-> Instance.properties.IDXXXX to that of QAS and saved and restarted but no luck as the Instance_IDXXXXX of QAS does not show up in teh config Tool menu.
All the properties files at teh OS level are pointing correctly to QAS, so I would liek to know if there is any way to change the config on eth DB level.
Thanks in advance.
sapkidHi,
When you go for ABAP+JAVA system refresh please always ose the JAVA export method .
Take the JAVA export of the source system with the help of sapinst.Check the j2ee_admin and the ddic password of source system.
then you need to get the offline backup of the Source system.
then import it on the target system wth the help of sapinst and in the middle it shall promt you to restore from the backup of the source system.
Always use this method as JAVA stores it file at file system level and in the database.So you need both the files .
Thanks Rishi Abrol
Maybe you are looking for
-
Very strange it appears that I am now on FF (I thought I was on Netscape) but it took 10 minutes + to get FF to open. Up until then I could not get it to open even after multiple tries. Looked at Tasks running and FF did not show even after multiple
-
STPO 2nd line item not getting shipping tab
Hi All, We have a issue with STP0, user created the STP0( different company code) with 3 line items of same materials. The first line items shipping tab is appering but second & third line items are not getting the shipping tab in item detail Please
-
Suppose in ESS -> Appraisals We have a)My Appraisals Under this we want to give a link which will display a pdf document (which is printable) for (say) 180 degree feed back. How can I do that? If 1) the pdf is only printable? 2) instead of th
-
Getting tight quicktime videos on the web?
Assuming, of course, that I start with a good quality video, how can I make the videos I post on my website look as tight and vivid as the Mac commericals do on the Apple website? Is there a trick in rendering them out, some other type of software I
-
When I try to start my ICloud, it says Account Not Verified. I don't have an email for instructions.
I get an error message when I click on my ICloud. It says that the Account is Not Verified. Check me email for instructions. I don't have an email. What do I do now?