HFM System Error (URGENT)

Hi All,
I am confronting an error in HFM 9.3.1. This is a system log error.
The error is "*_Error: The maximum calculation limit of 5 was reached_*."
I am unable to guess what the reason may be.
I tried to go in Hyperion Reporting and search for any formulae error but was unable to find one.
Can anyone please suggest what could be the possible cause of such type of error?
Regards,
SN

Hi,
A similar issue is resolved, please check the below thread:
Re: HFM CONFIGURATION
Hope this helps,
Thank you,
Charles Babu J

Similar Messages

HFM Configuration Error - URGENT

Hi there,
I'm trying to configure HFM (11.1.2 on windows). I'm able to configure all things (DCOM, WEBSERVER...) but can't configure the database.
When it gets to the database portion of the configuration, I see the following error message on the config logs created by the EPM System Configurator:
[2010-12-23T17:39:52.296-03:00] [EPMCFG] [WARNING] [EPMCFG-02084] [oracle.EPMCFG] [tid: 57] [ecid: 0000IoKxNUVApI1Fzv7U801D4utF00000i,0] [SRC_CLASS: com.hyperion.hfm.config.hfmregistry.HFMRegistry] Error while configuring HFM Database: java.lang.StringIndexOutOfBoundsException: String index out of range: -1
[2010-12-23T17:39:52.296-03:00] [EPMCFG] [ERROR] [EPMCFG-05020] [oracle.EPMCFG] [tid: 57] [ecid: 0000IoKxNUVApI1Fzv7U801D4utF00000i,0] [SRC_CLASS: com.hyperion.hfm.config.HfmDbConfigurator] Error: Error while configuring HFM DatabaseString index out of range: -1
[2010-12-23T17:39:52.296-03:00] [EPMCFG] [ERROR] [EPMCFG-01020] [oracle.EPMCFG] [tid: 57] [ecid: 0000IoKxNUVApI1Fzv7U801D4utF00000i,0] [SRC_CLASS: com.hyperion.config.wizard.impl.RunAllTasks] Error: [[
com.hyperion.cis.config.ProcessingException
     at com.hyperion.hfm.config.HfmDbConfigurator.configure(HfmDbConfigurator.java:164)
     at com.hyperion.config.wizard.impl.RunAllTasks.executeDbConfigTask(RunAllTasks.java:753)
     at com.hyperion.config.wizard.impl.RunAllTasks.execute(RunAllTasks.java:322)
     at com.hyperion.config.wizard.impl.RunnAllTasksState.run(RunnAllTasksState.java:89)
     at java.lang.Thread.run(Thread.java:619)
Does anyone have any idea?

Hi,
A similar issue is resolved, please check the below thread:
Re: HFM CONFIGURATION
Hope this helps,
Thank you,
Charles Babu J

500 Internal Server Error at HFM work space,Urgent;;;;;

Hi,
Can any one give me solution for this.
When I try to open Work space it is giving the error "500 Internal Server Error"
And I am using Apache Tomcat.\
Thanks in advance.

Hi 807662 ,
Hope this helps...
Can you post the errors from the BI+ error log?
You say that you can't log into the client applications? What client apps are you trying to log into?
If Planning can you post the the errors from Planning? If HFM can you post the errors from HFM?
Can you post the errors from the Event Viewer log on the server?
-David
Web server returns the message "Internal Server Error (HTTP 500)"
DETAILS:
This message usually indicates an error on the Web server. This message is too generic to provide the actual cause of the error, but a careful examination of the Web server logs, can provide clues which may point you in the right direction.
There are a few of things you can infer from an "Internal Server Error" message.
1. The web server is NOT down, i.e it is responding to an HTTP request, since the error is being generated and returned by the web server. Unlike a "Page cannot be displayed" error which is a default message generated by a browser if it cannot contact the web server. The "Internal server error" message is caused by the web server actually returning an HTTP 500 code.
2. If all users are getting this error, its might indicate a problem with the web server itself, perhaps a lack of system resource, a system-wide failure, or a configuration or installation issue. If only one user gets the error, its probably just tied to the session of the user, and even may be specific to the current activity
3. The root cause is the web server, and not the application server or database, even though its possible that an application server or database response might trigger an error on the web server. For example, SQL returning a large result set might cause an OutOfMemory condition on the web server. If the application server errors out, the PIA servlet traps it and returns a generic message saying "An error has occurred on the application server", it does not return an HTTP 500 error.
The Internal Server Error message is generated by the web server, when the sub-process it called to process the browser's request, did not complete successfully. The sub-process may be a CGI program, ( Verity search in PeopleBooks for example), it may be another web server ( Apache proxying to WebLogic), or it may be a servlet (Weblogic HTTP handing off request to PIA). If the sub-process errors out, or returns an invalid error code, the web server will return an HTTP 500 error code to the browser.
The key therefore in troubleshooting HTTP 500 errors is to find out what sub-process was invoked, and what was the error encountered by the sub-process. Start by checking the access log on the web server. It will have the URL with the GET or POST request, and the return code. Here
Note though, that not all java exceptions translate to HTTP 500 errors, and not all HTTP 500 errors caused by servlets correspond to java errors. Sometimes a servlet may recover or ignore an exception and manage to return a valid response to the calling web server, mitigating an HTTP 500 code response to the browser.
Some of the common causes of servlet failures are:
- Invalid web server configuration ( these errors should be consistently reproducible)
- Errors from the Application Server that are not captured and translated into a meaningful message for the user.
- Network I/O errors while communicating with Application Server, or to a proxy plugin.
- Out of memory conditions on the web server.
- Problems with the Java runtime.
- System errors, like running out of disk space, insufficient permissions, running out of threads, etc.
- Errors in the servlet code itself. Example: NullPointerException
- Invalid or corrupted Session information, perhaps caused by Proxies, Load Balancers, Timeouts.
- Incorrect web server, JRE, OS patches and or versions.
G'Luck,
David
Edited by: David Debish on Feb 4, 2011 3:12 PM
Edited by: David Debish on Feb 4, 2011 5:09 PM

Urgent - Messages in RWB in "System Error" status - Resending

All,
I am trying to resend the messages in Message Monitoring of RWB which are in "System Error".
Message selected and Clicked on resend and it would not ask my password.
We are on SP19 of XI 3.0. Is it something new with the SP19?
I am pretty much sure that it used to ask for password earlier. And we dont have SSO (single sign on) enabled.
reg,

Naveen,
Have you seen this weblog:
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
Also if you give the password once you dont need to give again. So that might be the reason why it is not asking you. Close all your browsers and open once again and give a try.
---Satish

URGENT: system error - Maual restart possible

Hi Experts,
I'm facing a problem in Xi prodoction. Both inbound and outbound are throwing system error - Maual restart possible. The user is restarting manually in order to post the invoice.
Basically this is retail project, from POS s/w to Xi to SAP R/3. The scenario is file to idoc(inbound) and idoc to file (outbound).
The error is :
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="PERSIST">MESSAGE_NOT_FOUND</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>XML message not found</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
The acknowledgement error is :
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_SND_SERV</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to convert the sender service to an ALE logical system</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have gone throw the sdn post and blogs but i'm uable to trace the problem.
Kindly suggest me ASAP as this is business critical and posting have been stoped.
Regards,
Pawan

Hi,
Please find the interface determination trace. Hope this will help you to provide some suggestion.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="B" name="IDX_INBOUND_XMB" />
- 
<Trace level="1" type="T">User: XIBGUSER</Trace>
<Trace level="1" type="T">Language: E</Trace>
<Trace level="1" type="T">ALE-AUDIT-IDoc-Inbound Handling</Trace>
<Trace level="1" type="T">IDoc-Inbound-Handling</Trace>
<Trace level="2" type="T">Tunneling needed?</Trace>
<Trace level="2" type="T">Partytype = LS fallback to logical system</Trace>
<Trace level="3" type="T">Sender Interface</Trace>
<Trace level="3" type="T">WP_PLU.WP_PLU03 urn:sap-com:document:sap:idoc:messages</Trace>
<Trace level="1" type="T">Syntax-Check-Flag X</Trace>
<Trace level="1" type="T">IDoc-Tunnel-Flag</Trace>
<Trace level="1" type="T">Queueid</Trace>
- <Trace level="1" type="B" name="IDX_IDOC_TO_XML">
<Trace level="1" type="T">Get the Metadata for port SAPRT2</Trace>
<Trace level="2" type="T">----
</Trace>
<Trace level="2" type="T">IDX_STRUCTURE_GET Details</Trace>
<Trace level="2" type="T">Port : SAPRT2</Trace>
<Trace level="2" type="T">IDoctyp : WP_PLU03</Trace>
<Trace level="2" type="T">Cimtyp :</Trace>
<Trace level="2" type="T">RFCDest :</Trace>
<Trace level="2" type="T">Release : 700</Trace>
<Trace level="2" type="T">Version : 3</Trace>
<Trace level="2" type="T">Direct : 1</Trace>
<Trace level="2" type="T">SAPREL : 700</Trace>
<Trace level="2" type="T">----
</Trace>
<Trace level="1" type="T">Convert Segment-Definitions to Types</Trace>
<Trace level="1" type="T">Make Syntax check of actual Idoc</Trace>
<Trace level="2" type="T">----
</Trace>
<Trace level="2" type="T">IDX_SYNTAX_CHECK</Trace>
<Trace level="2" type="T">Port : SAPRT2</Trace>
<Trace level="2" type="T">IDoctyp : WP_PLU03</Trace>
<Trace level="2" type="T">Cimtyp :</Trace>
<Trace level="2" type="T">----
</Trace>
<Trace level="2" type="T">Create XML-Control Record</Trace>
<Trace level="2" type="T">Create XML-Data Records</Trace>
<Trace level="3" type="T">Create data Record E1WPA01</Trace>
<Trace level="3" type="T">Create data Record E1WPA02</Trace>
<Trace level="3" type="T">Create data Record E1WPA03</Trace>
<Trace level="3" type="T">Create data Record E1WPA04</Trace>
<Trace level="3" type="T">Create data Record E1WPA05</Trace>
<Trace level="3" type="T">Create data Record E1WPA01</Trace>
<Trace level="3" type="T">Create data Record E1WPA02</Trace>
<Trace level="3" type="T">Create data Record E1WPA03</Trace>
<Trace level="3" type="T">Create data Record E1WPA04</Trace>
<Trace level="3" type="T">Create data Record E1WPA05</Trace>
<Trace level="3" type="T">Create data Record E1WPA01</Trace>
<Trace level="3" type="T">Create data Record E1WPA02</Trace>
<Trace level="3" type="T">Create data Record E1WPA03</Trace>
<Trace level="3" type="T">Create data Record E1WPA04</Trace>
<Trace level="3" type="T">Create data Record E1WPA05</Trace>
<Trace level="3" type="T">Create data Record E1WPA01</Trace>
<Trace level="3" type="T">Create data Record E1WPA02</Trace>
<Trace level="3" type="T">Create data Record E1WPA03</Trace>
<Trace level="3" type="T">Create data Record E1WPA04</Trace>
<Trace level="3" type="T">Create data Record E1WPA05</Trace>
</Trace>
<Trace level="2" type="T">Partytype = LS fallback to logical system</Trace>
<Trace level="2" type="T">Set Sender Routing-object</Trace>
<Trace level="1" type="T">Set Receiver Routing-object</Trace>
<Trace level="1" type="T">Exit Function IDX_INBOUND_XMB</Trace>
<Trace level="1" type="T">COMMIT is expected by application !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- 
<Trace level="3" type="T">XMB was called with external pipeline PID = ENTRY</Trace>
<Trace level="3" type="T">Getting type of XMB...</Trace>
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="2" type="T">XMB kind = CENTRAL</Trace>
<Trace level="3" type="T">Start pipeline found</Trace>
<Trace level="2" type="T">Switch to external start pipeline PID = CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV">
<Trace level="3" type="T">No triggers found. OK.</Trace>
</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="3" type="T">system-ID = XIP</Trace>
<Trace level="3" type="T">client = 600</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = XIBGUSER</Trace>
<Trace level="1" type="Timestamp">2008-03-27T06:35:02Z UTC-7</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">Message-GUID = DCFBC7EA238100F1B64A00145EDC94EF</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="3" type="T">QOS = EO</Trace>
<Trace level="3" type="T">Message-GUID = DCFBC7EA238100F1B64A00145EDC94EF</Trace>
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="3" type="T">Generate prefixed queue name</Trace>
<Trace level="1" type="T">Queue name : XBTI0001</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0001</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="3" type="T">Setup qRFC Scheduler</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="3" type="T">Call qRFC .... MsgGuid = DCFBC7EA238100F1B64A00145EDC94EF</Trace>
<Trace level="3" type="T">Call qRFC .... Version = 000</Trace>
<Trace level="3" type="T">Call qRFC .... Pipeline = CENTRAL</Trace>
<Trace level="3" type="T">OK.</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="3" type="T">Version number = 000</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 001</Trace>
<Trace level="3" type="T">Message version 000</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
<Trace level="1" type="T">--start sender interface action determination</Trace>
<Trace level="1" type="T">select interface WP_PLU.WP_PLU03*</Trace>
<Trace level="1" type="T">select interface namespace urn:sap-com:document:sap:idoc:messages</Trace>
<Trace level="1" type="T">no interface found</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
<Trace level="3" type="T">Trace object available again now. OK.</Trace>
<Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
<Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="3" type="T">message version successfully read from persist version= 000</Trace>
<Trace level="2" type="T">Increment log sequence to 001</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="3" type="T">system-ID = XIP</Trace>
<Trace level="3" type="T">client = 600</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = XIBGUSER</Trace>
<Trace level="1" type="Timestamp">2008-03-27T06:35:03Z UTC-7</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline attributes</Trace>
<Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
<Trace level="3" type="T">ENABLE = 1</Trace>
<Trace level="3" type="T">TRACELEVEL = 0</Trace>
<Trace level="3" type="T">EXEMODE = A</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline elements</Trace>
<Trace level="3" type="T">ELEMPOS = 0001</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0002</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0003</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0004</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0007</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0008</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0009</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="1" type="Timestamp">2008-03-27T06:35:03Z UTC-7 Begin of pipeline processing PLSRVID = CENTRAL</Trace>
- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
<Trace level="1" type="Timestamp">2008-03-27T06:35:03Z UTC-7 Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_RD_PLSRV</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">Start without given receiver</Trace>
<Trace level="2" type="T">Classic Receiver Determination via Rules.</Trace>
<Trace level="2" type="T">Check conditions for rule line no. 1</Trace>
<Trace level="2" type="T">...valid Receiver w/o Condition: - e_solutionsPOS</Trace>
<Trace level="2" type="T">No Receiver found behaviour: 2</Trace>
<Trace level="2" type="T">Number of Receivers:1</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2008-03-27T06:35:03Z UTC-7 End of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 001</Trace>
<Trace level="3" type="T">Message version 001</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
<Trace level="1" type="Timestamp">2008-03-27T06:35:03Z UTC-7 Start of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_ID_PLSRV</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">Check conditions for (Inb: Party Srvc If) e_solutionsPOS WP_PLU.WP_PLU03</Trace>
<Trace level="2" type="T">...valid InbIf without Condition: WP_PLU.WP_PLU03</Trace>
<Trace level="2" type="T">Number of receiving Interfaces:1</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2008-03-27T06:35:03Z UTC-7 End of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 002</Trace>
<Trace level="3" type="T">Message version 002</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 002</Trace>
<Trace level="3" type="T">Message version 002</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="3" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 014</Trace>
<Trace level="3" type="T">Message version 002</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</SAP:Trace>
Thanks,
Pavan

System Error Please Help....Its very urgent

When I am creating contract it gives error like System error occurred during lock management
Please help me on this issue, Reward with Full Points
Regards
Mallik

Hi Mallik,
Please refer <b>SAP Note : 431819</b> for more information.
Best Regards,
Johnny.

Very urgent REG:System error: RSDU_ANALYZE_TABLE_ORA/ ORACLE

Hi,
Can anyone help me in finding out this error.System error: RSDU_ANALYZE_TABLE_ORA/ ORACLE.
Thanks & Regards,
Praveena.

Hi
It's only part of whole message.
See the entire message.
It should look less more this way:
============================
SQL-ERROR: 603 ORA-00603: ORACLE server session terminated by fat al error
System error: RSDU_ANALYZE_TABLE_ORA/ ORACLE
ABAP/4 processor: DBIF_REPO_SQL_ERROR
Job cancelled
============================
See ORA-XXXXX here ORA-00603
Next go to:
http://ora-code.com/
Best regards

!!System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE

Hi Gurus,
Mater data text loading from a DSO to a InfoObject has failed in the process Chain at DTP step while trying to extract Data packet 2 from the DSO.
In the log i am getting following error message:
"System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE (see long text)
Message no. BRAIN299".
Please help urgent.
FYI.....
we have recently done upgrade from BI/ABAP SP11 to SP15 and the latest Java SP || 14 (both included in SPS 14).
Points will surely be awarded.
Thanks,
Anurag

Hello Anurag,
Could you solve this problem? If so, please share the solution with me. I'm getting the same error while loading data using DTPs.
Regards,
Neha

Employee Photo Upload Fail - "System error when archiving"

Hi all,
When i am trying upload a photo of an employee in our ESS development portal its working fine. But the issue here is when i am trying to upload the same in testing ESS portal its displaying an error message as "System error when archiving a photo" and i tried to upload the photo in back end also at that time its displaying an error as "HTTP error :401 unauthorized".
Kindly help me to resolve this problem ASAP.
URGENT!!!!!!!
Thanks in advance..!!!

Hi Van,
Thank you for your reply. Finally we found the solution for this. The Issue was that the user CONT_SERVER in SICF(tcode) -> Content Server was locked. We unlocked it , now the photos are uploading successfully...

System error in program SAPLRSOA

Hello All,
I tried to execute a query and it resulted in the following error:
System error in program SAPLRSOA and form FUNC RSOA_VCUBE_READ_REMOTE_DATA[6] (see long text).
In BI, the data is readfrom the remote cubes. And there seems to be error in the function used to read the data from these remote cubes.
Further on seeing the long text, I got the follwing message:
Diagnosis
This internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
Notification Number BRAIN 299
Can someone pls help me on this soon?

Hi,
Pls chk this note;
Note 983605 - Query on RemoteProvider: No data or termination
Symptom
A query on a VirtualProvider (SAP RemoteCube) or on a MultiProvider that contains a Virtual Provider terminates with an error message from the source system. Possible errors are:
Unexpected error: reduce_field_list
Or: The query does not return any data.
Or: If you carry out the query on a MutiProvider with virtual PartProvider, it may return incorrect data, because the part from the RemoteCube is missing.
Other terms
RSOA_VCUBE_READ_REMOTE_DATA, PERFORM transform_to_ts, Remote InfoCube, InfoProvider, Cube, data target, destination
Reason and Prerequisites
This problem is caused by a program error.
The VirtualProvider (SAP RemoteCube) is connected with a DataSource via a (3.X) InfoSource.
The navigation step of the query leads to a limitation (selection) on a characteristic that is filled with a constant in the transfer rule (between 3.X InfoSource and DataSource).
Technical: Initial entry in field list.
Solution
BW 3.0B
           Import Support Package 33 for 3.0B (BW 3.0B Patch 33 or SAPKW30B33) into your BW system. The Support Package is available once Note 914950 "SAPBWNews BW 3.0B Support Package 33", which describes this Support Package in more detail, has been released for customers.
BW 3.10 Content
           Import Support Package 27 for 3.10 (BW 3.10 Patch 27 or SAPKW31027) into your BW system. The Support Package is available once Note 935963 "SAPBWNews BW 3.1 Content Support Package 27", which describes this Support Package in more detail, has been released for customers.
BW 3.50
           Import Support Package 19 for 3.5 (BW 3.50 Patch 19 or SAPKW35019) into your BW system. The Support Package is available once Note 928662 "SAPBWNews BW Support Package 19 NetWeaver'04 Stack 19", which describes this Support Package in more detail, has been released for customers.
BW 7.0
           Import Support Package 10 for 7.0 (BW 7.0 Patch 10 or SAPKW70010) into your BW system. The Support Package is available once Note 914304 "SAPBWNews BW 7.0 Support Package 10", which describes this Support Package in more detail, has been released for customers.
In urgent cases, you can implement the correction instructions.
You must first implement Notes 932065, 935140, 948389, 964580 and 969846, which provide information about transaction SNOTE. Otherwise, problems and syntax errors may occur when you deimplement some notes.
To provide information in advance, the notes mentioned above may already be available before the Support Package is released. In this case, the short text of the note still contains the words "Preliminary version"
Hope this helps
Regards
CSM Reddy

System error in program SAPLRRI2 and form FEMS_IN_FORMULA_GET-01 Message

Hi Gurus,
I am getting error 'system error in program SAPLRRI2 and form FEMS_IN_FORMULA_GET-01' while checking and executing a query.
The scenario is :
- The query is using Replacement path formula variables and when I do remove these the error disappears.
- I recreated the same formula variable but the error message reappears.
- We are separating systems (moving on to new system) and the query runs absolutely fine in the old system.
- The same variable is been used in some other queries as well but they run absolutely fine without any error.
Any suggestions what is going wrong ? Should I raise an OSS to SAP, thats going to be the final GO !!
I have tried almost doing all things but the error remains the same. This is quiet urgent and Reply will be much appreciated.
Best Regards
Ritesh

Hi,
Thanks for the reply. OSS note 982328 becomes irrelevant in my case as we are on SAP BW 7.3 and SP SAPKW73003. So this is the most recent and latest version of SAP.
One more update is I tried regenerating the query in RSRT/RSRT1 but it starts in debug mode. This is of more worry to me now. Any suggestions or solutions are welcome, meanwhile I will raise this to SAP.
Best Regards
Ritesh Singh

System error in program CL_RSMD_RS

Dear gurus,
I am gettng an error messg "System error in program CL_RSMD_RS and form IF_RSMD_RS~_READ_META_DATA-02--- BRAIN--- 299",when i try to Clik the Details button for Workcenter in my Query Input Selection screen and doesnt allow me to view the list of workcenters..
(Note: Executing query on Infoset (Workcenter Info obj and a Zcube)..
Its really urgent and i would appreciate ur help on this....Did check the search threads but no luck..
thanks

This could be due to a number of reasons :
1. Ensure your query definition is correct.
2. Ensure the master data on Work center and the underlying attributes are correct.
3. Check in RSRT entering your query and check this.

System error in program CL_RSR_REQUEST and Form TEXT_ELEMENTS_GET:Variabl

Does anyone have any ideas or experiences for resolving "System error in program CL_RSR_REQUEST and Form TEXT_ELEMENTS_GET:Variabl"
Your input is appreciated

hi Arun,
sap oss note 858458 may relevant for you, take a look, may need support package.
Symptom
When you execute a query for which the user does not have authorization, a system error occurs: CL_RSR_REQUEST; Form TEXT_ELEMENTS_GET:VARIABLE.
Reason and Prerequisites
This is caused by a program error.
Solution
BW 3.0B
           Import Support Package 28 for 3.0B (BW3.0B Patch28 or SAPKW30B28) into your BW system. The Support Package is available when Note 0783170 "SAPBWNews BW3.0B Support Package 28", which describes this Support Package in more detail, is released for customers.
BW 3.10 Content
           Import Support Package 22 for 3.10 (BW3.10 Patch22 or SAPKW31022) into your BW system. The Support Package is available when Note 0783252 "SAPBWNews BW3.1 Content Support Package 22", which describes this Support Package in more detail, is released for customers.
BW 3.50
           Import Support Package 14 for 3.5 (BW3.50 Patch14 or SAPKW35014) into your BW system. The Support Package is available when Note 0836439 "SAPBWNews BW Support Package 14 NetWeaver'04 stack 14" ", which describes this Support Package in more detail, is released for customers.
In urgent cases you can implement the correction instructions.
To make information available in advance, the notes mentioned may already be available before the Support Package is released. However, in this case the short text still contains the words "preliminary version".

System error in program CL_RSD_MULTIPROV

Hi guys,
Does anybody recognize this error message? After transporting to our Production system, I cannot open my plan queries anymore. I transported various items, including cubes, transformations etc. but also planning items.
System error in program CL_RSD_MULTIPROV and form FACTORY -02-. Error when generating Data Provider.
Any help is very welcome!
Regards,
Joost

You didn't mention your version ou SP but try reading note 1113372:
Symptom
After you implement Note 1090490 or import Support Package 16, a termination occurs and the system issues the message "System error in program CL_RSD_MULTIPROV and form FACTORY-02".
Other terms
CL_RSD_MULTIPROV, CL_RSD_MULTIPROV_CONSTRUCT, CL_RSD_MULTIPROV_CHECK, compounding, constant
Reason and Prerequisites
This problem occurs if you use a MultiProvider that contains an aggregation level as an InfoProvider for which a compound parent is set as a constant in the underlying InfoCube.
Solution
SAP NetWeaver 7.0 BI
Import Support Package 17 for SAP NetWeaver 7. 0 BI (BI Patch 17 or SAPKW70017) into your BI system. The Support Package is available when Note 1106569 "SAPBINews BI 7.0 Support Package 17", which describes this Support Package in more detail, is released for customers.
In urgent cases, you can implement the correction instructions as an advance correction.

System error in program CL_RSR_RRK0_PARTITION and form BROWSE_02-03-

Guys,
I'm getting an error when i filter something in BEX Analyzer.
For Eg, I have an Material Free Characterisitics, executed the Query Successfully. After that in Workbook i'm trying to filter Material Values.
It Shows the error as " System error in program CL_RSR_RRK0_PARTITION and form BROWSE_02-03- "
Plz help its urgent ...
Regards,
SK

Hi Chetan,
Thanx for your reply.
But we already applied the Notes : 983354.
Have a problem only with ~BROWSE_02-03-
Still its showing error....
Regards,
Sathish

HFM System Error (URGENT)

Similar Messages

Maybe you are looking for