HFM -System Messages
Hi,
Currently there is month end Process going on in our concern. while we monitoring the server we encountered lot of system messages.. this is one among " Unspecified Error"-Transaction (Process ID xxx) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.;
What does it mean? Can anyone comment on this
Thanks
HS
we used to get similar errors in HFM. We haven't received these errors since we applied all of the available service Packs for 9.3.1. I'm not sure what causes it. I wish I could be more helpful.
Similar Messages
-
I am having issues with seeing Users on system or system messages in release HFM 11.1.2.1 I get a message that *"You do not have the proper access rights to perform this task."* and I ensured that in the configuration the creator group and administrator group are set up as administrators. I have not been able to find anything that I can change security wise.
The details of the error are below:
*" System Messages "*
You do not have the proper access rights to perform this task.+
Show Details:
Error Reference Number: {5F81E0EB-52C5-4C96-8F5A-DD9ECBAE4233}
Num: 0x8004021d;Type: 0;DTime: 5/9/2011 8:32:22 AM;Svr: GITSHYPT01;File: CHsxServer.cpp;Line: 2457;Ver: 11.1.2.1.000.3082;
Num: 0x8004021d;Type: 0;DTime: 5/9/2011 8:32:22 AM;Svr: GITSHYPT01;File: CHsxClient.cpp;Line: 4175;Ver: 11.1.2.1.000.3082;
Num: 0x8004021d;Type: 0;DTime: 5/9/2011 8:32:22 AM;Svr: GITSHYPT01;File: CHFMwManageApplications.cpp;Line: 1060;Ver: 11.1.2.1.000.3082;
*" Users on System "*
You do not have the proper access rights to perform this task._
Show Details:
Error Reference Number: {1B34A605-F996-4CB9-8D7D-30C0A467170F}
Num: 0x8004021d;Type: 0;DTime: 5/9/2011 8:33:36 AM;Svr: GITSHYPT01;File: CHsxClient.cpp;Line: 3857;Ver: 11.1.2.1.000.3082;
Num: 0x8004021d;Type: 0;DTime: 5/9/2011 8:33:36 AM;Svr: GITSHYPT01;File: CHFMwManageApplications.cpp;Line: 1891;Ver: 11.1.2.1.000.3082;
can anyone please assist....?
Regards,
Shan...I believe your user ID is not contained within the group set up in the HFM configuration's "application administrator". This group is independent of the role "administrator" since it is set at the server level, not application level. The same group controls access to the enable/disable connnections, and logout users feature.
--Chris -
Unable to view System Messages
I am having issues with seeing users in application or system messages in release HFM 11.1.1.2 We are all getting a message that we do not have the proper access to perform the task and we are set up as administrators. I have not been able to find anything that I can change security wise.
Hi
Work on window 2003 OS or Workin Mosilla or IE 6 -
Workspace: Administration - System Messages
I'm debugging some consolidation rules and need to view the system messages, but I receive the following:
Too many rows requested. Please revise filters to reduce size.
Error Reference Number: {87A0105D-8A45-43FC-9EF0-013A5AA79A0E}
I can't filter any more, as I'm looking at only 1 day, 1 app. I think one way I can see these messages is in the backend tables, but I'm not sure which table to link to the HFM_ERRORLOG to view the text portion of the messages. Any thoughts?
Thanks!Fine ! ... But, I have not access to the server, thus, I need to find another solution.
Have you already try to delete the log file, or to purge it? Is it possible?
Our version is HFM 9.3.1
thankis in advance -
How to pop up a system message for a specific user when She/He log on SAP
Hi Friends,
As we know SM02 setting will pop up a system message to all users in specific client in a specific period when the user log on SAP system; and we can do the same thing via using function module SM02_ADD_MESSAGE.
But now we want to pop up a message to a specific user ID when somebody log on SAP via this ID, instead of all user IDs in the client. Please do we have any similar traction / function module / class method to to do this job??
Thanks in advance.
JoeBelow code can be used to send a pop up message to all users who are logged on to the
system.
DATA: MESSAGE(128) VALUE 'Test message'.
DATA: OPCODE TYPE X VALUE 2.
DATA: BEGIN OF USR_TABL OCCURS 10.
INCLUDE STRUCTURE UINFO.
DATA: END OF USR_TABL.
CALL 'ThUsrInfo' ID 'OPCODE' FIELD OPCODE
ID 'TAB' FIELD USR_TABL-SYS.
LOOP AT USR_TABL.
CALL FUNCTION 'TH_POPUP'
EXPORTING
CLIENT = SY-MANDT
USER = USR_TABL-BNAME
MESSAGE = MESSAGE
EXCEPTIONS
USER_NOT_FOUND = 1.
ENDLOOP.
In the above code just pass the desired user ID instead of All user ID's
Edited by: harsh bhalla on Mar 26, 2009 2:14 PM -
Unable to Log-in *SAP System Message : Error while reading a Dynpro*
Hi,
We are facing issues while logging-in through SAP logon 710.
The system throws an error dialog box with the below message:
SAP System Message : Error while reading a Dynpro
At the OS level Java process server0 is in stop status with exit code -11113. In ABAP WP Table all processes are in wait status.Hi Please find the contents of std_server.out below.
stdout/stderr redirect
node name : server0
pid : 4124
system name : KEC
system nr. : 01
started at : Mon Jul 27 15:44:57 2009
[Thr 5656] MtxInit: -2 0 0
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
SAP J2EE Engine Version 7.00 PatchLevel 110760.44 is starting...
Loading: LogManager ... 250 ms.
Loading: PoolManager ... 0 ms.
Loading: ApplicationThreadManager ... 47 ms.
Loading: ThreadManager ... 16 ms.
Loading: IpVerificationManager ... 0 ms.
Loading: ClassLoaderManager ... 16 ms.
Loading: ClusterManager ... 93 ms.
Loading: LockingManager ... 32 ms.
Loading: ConfigurationManager ... 1032 ms.
Loading: LicensingManager ... 0 ms.
Loading: CacheManager ... 93 ms.
Loading: ServiceManager ...
Loading services.:
Service runtimeinfo started. (16 ms).
Service cross started. (31 ms).
Service file started. (31 ms).
Service memory started. (31 ms).
Service timeout started. (16 ms).
Service trex.service started. (32 ms).
Service userstore started. (0 ms).
Service jmx_notification started. (15 ms).
Service p4 started. (62 ms).
Service classpath_resolver started. (16 ms).
Service deploy started. (3722 ms).
Service MigrationService started. (31 ms).
Service bimmrdeployer started. (0 ms).
Service log_configurator started. (5177 ms).
Service locking started. (0 ms).
Service http started. (126 ms).
Service naming started. (157 ms).
Service failover started. (16 ms).
Service appclient started. (31 ms).
Service javamail started. (47 ms).
Service ts started. (47 ms).
Service jmsconnector started. (47 ms).
Service licensing started. (15 ms).
Service connector started. (93 ms).
Service iiop started. (94 ms).
Service configuration started. (16 ms).
Service webservices started. (265 ms).
Service dbpool started. (1204 ms).
Service UT started. (0 ms).
Jul 27, 2009 3:45:09 PM com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_54] Fatal: Initialization of ABAP data source (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed: " Error while reading a dynpro ". This message is critical if it appears during the startup of the AS Java.
Jul 27, 2009 3:45:09 PM ...re.server.ume.service.UMEServiceFrame [SAPEngine_System_Thread[impl:5]_54] Fatal:
service com.sap.security.core.ume.service ================= ERROR =================
Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details: Error while reading a dynpro
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: Error while reading a dynpro
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
... 6 more
com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details: Error while reading a dynpro
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: Error while reading a dynpro
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
... 6 more
[Framework -> criticalShutdown] Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
Jul 27, 2009 3:45:09 PM com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_54] Fatal: Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started. -
System message at the time of login & need post installation
Hallo Everybody
I just install the SAP IDES ECC 5.0 (SQL database), I also running some transaction, but from 2 days i receive the message at the time of logging
System message
Validity of certificate from list with PSE type >system PSE < ends in 1 day. for more information see the SAP system log (transaction SM21)
but i also check the tran. SM21 but i can't find something that indicate what exact erroe and dignosis.
So please suggest me the solution.
Also what tran. are need to run (Post installation) after the installation. beacause i install IDES on standalone machine (Require Post installation proc.)
System Desc.
SID=ERP
instance no=00
host=sapsrv
database SQL 2005check these links for the PSE error:
http://help.sap.com/saphelp_nw2004s/helpdata/en/0e/fb993af7700577e10000000a11402f/frameset.htm
PSE certification validity end
post-processing steps are in the installation guide. -
SAP System Message: Syntx error or generation error in a screen
dear sap basis gurus,
i am currently having problems signing on to our DEV server. i get this error message:
<SID>: SAP System Message
Syntx error or generation error in a screen.
it won't let me log on.
there were no changes made on the server (i.e., profile parameters) lately. it was working really fine after our support package level upgrade about 5 months ago.
have you encountered this problem before? please help me as there we have two imminent go-lives.
thank you very much in advance.
best regards,
alberthello nick, ashok,
thank you very much for your responses.
i have already resolved this issue by just freeing up some space from our disks. not one of them was full though.
i hope i would no longer encounter the error message.
again, thank you.
best regards,
albert -
Dear all,
Any one can please tell me the unique id for System Message. Also i want to know the unique id for 'yes' and 'No' in System Message. Its very urgent
Thanks in advance
with Regards
G.shankarSystem message has formtype = 0. The Yes and No button has no ids for sap, but when you want to press one of this button, use sendkeys as SBO_Application.SendKeys("") or tab for No (default is Yes).
For accesing to correct system message, use some global variable and there before showing system msgbox set some value and compare it after showing.
hope it helps -
Problem with GlassFish and Sun Java System Message Queue
Hi,
I used application server PE.8 and I upgraded to Sun Java System Application Server Platform Edition 9.0 Update 1 Patch 1, and I changed all my CLASSPATH and everything. My system is working fine, but the Sun Java System Message Queue that I used before is still showing the queues and physical queues of the previous application server, not the new one. Do you know if there is way to change that and link it to the new version?
thanksUse an ESB like ServiceMix to bridge JMS providers
http://servicemix.org/
Or write your own MessageListener to consume from one JMS and publish on another one. Be careful with queues to avoid loosing the ordering - so you probably want to use a single MessageListener per subscription/queue - or to take advantage of Tibco's exclusive queues to ensure ordering is preserved. If ordering doesn't matter then don't worry too much about it and maybe have a pool of consumers to improve throughput
James
http://logicblaze.com/ -
Bapi_po_create1 is giving same system messages multiple time in the joblog
Hi Experts,
Bapi_po_create1 is giving same system messages multiple times in the job log when we ran the program in the background
can u plz suggest how to prevent these multiple appearances of same messages.
I am pasting the code below whn i ran this program in backgorund job log is having the messages.
Date Time Message text Message class Message no. Message type
08/06/2009 08:11:53 Job started 00 516 S
08/06/2009 08:11:53 Step 001 started (program ZZZTEST, variant &0000000000008, user ID BREDDY) 00 550 S
08/06/2009 08:11:54 Commitment plan contains no account assignment data MECP 020 S
08/06/2009 08:11:54 Commitment plan contains no account assignment data MECP 020 S
08/06/2009 08:11:54 Status "Initial Block" of material 20111 does not allow external procurement ME 053 E
08/06/2009 08:11:54 Status "Initial Block" of material 20111 does not allow external procurement ME 053 E
08/06/2009 08:11:54 Source not included in list despite source list requirement 06 722 E
08/06/2009 08:11:55 Pricing/euro: Attention: Euro Customizing not maintained VH 777 S
08/06/2009 08:11:55 Pricing/euro: Attention: Euro Customizing not maintained VH 777 S
08/06/2009 08:11:55 Status "Initial Block" of material 20111 does not allow external procurement ME 053 E
08/06/2009 08:11:55 Purchase order still contains faulty items MEPO 000 E
08/06/2009 08:11:55 Job finished 00 517 S
Edited by: bhavani prasad kotharu on Aug 6, 2009 3:09 PMHERE IS THE CODE OF THE PROGRAM, WE R JUST PASSING SOME PO DATA TO THE BAPI_PO_CREATE1,ON RUNNING THIS PROGRAM IN BACKGROUND SAME SYSTEM MESSAGES ARE APPEARED MULTIPLE TIMES,----
REPORT zzztest.
DATA : lwa_bapimepoheader TYPE bapimepoheader
,lwa_bapimepoheaderx TYPE bapimepoheaderx
,li_bapimepoitem TYPE STANDARD TABLE OF bapimepoitem
,lwa_bapimepoitem TYPE bapimepoitem
,li_bapimepoitemx TYPE STANDARD TABLE OF bapimepoitemx
,lwa_bapimepoitemx TYPE bapimepoitemx
,li_conditions TYPE STANDARD TABLE OF komv
,li_return TYPE STANDARD TABLE OF bapiret2
, n TYPE c
PARAMETERS: p1 TYPE c AS CHECKBOX.
IF p1 = 'X'.
lwa_bapimepoheader-doc_type = 'NB'.
lwa_bapimepoheader-purch_org = 'NA00'.
lwa_bapimepoheader-pur_group = 'C02'.
lwa_bapimepoheaderx-doc_type = 'X'.
lwa_bapimepoheaderx-purch_org = 'X'.
lwa_bapimepoheaderx-pur_group = 'X'.
lwa_bapimepoitem-po_item = '10'.
lwa_bapimepoitem-material = '000000000000020111'.
lwa_bapimepoitem-plant = 'CA01'.
lwa_bapimepoitem-vend_mat = '1000'.
lwa_bapimepoitem-quantity = '10'.
lwa_bapimepoitem-orderpr_un = 'M'.
lwa_bapimepoitem-no_more_gr = 'K'.
lwa_bapimepoitem-agreement = '4600000095'.
lwa_bapimepoitem-agmt_item = '10'.
lwa_bapimepoitem-pricedate = 'X'.
lwa_bapimepoitem-price_date = '20071030'.
lwa_bapimepoitem-no_rounding = 'X'.
APPEND lwa_bapimepoitem TO li_bapimepoitem.
lwa_bapimepoitemx-po_item = '10'.
lwa_bapimepoitemx-po_itemx = 'X'.
lwa_bapimepoitemx-po_itemx = 'X'.
lwa_bapimepoitemx-material = 'X'.
lwa_bapimepoitemx-plant = 'X'.
lwa_bapimepoitemx-quantity = 'X'.
lwa_bapimepoitemx-po_unit = 'X'.
lwa_bapimepoitemx-orderpr_un = 'X'.
lwa_bapimepoitemx-acctasscat = 'X'.
lwa_bapimepoitemx-agreement = 'X'.
lwa_bapimepoitemx-agmt_item = 'X'.
lwa_bapimepoitemx-pricedate = 'X'.
lwa_bapimepoitemx-price_date = 'X'.
lwa_bapimepoitemx-preq_no = 'X'.
lwa_bapimepoitemx-preq_item = 'X'.
lwa_bapimepoitemx-no_rounding = 'X'.
APPEND lwa_bapimepoitemx TO li_bapimepoitemx.
DATA: lo_msg_handler TYPE REF TO cl_message_handler_mm.
CALL METHOD cl_message_handler_mm=>get_handler
IMPORTING
ex_handler = lo_msg_handler.
lo_msg_handler->remove_all( ).
lo_msg_handler->cleanup( ).
CALL FUNCTION 'BAPI_PO_CREATE1' "in background task
EXPORTING
poheader = lwa_bapimepoheader
poheaderx = lwa_bapimepoheaderx
testrun = 'X'
NO_MESSAGING = c_x
NO_MESSAGE_REQ = c_x
no_authority = 'X'
IMPORTING
expheader = lwa_bapimepoheader
TABLES
return = li_return
poitem = li_bapimepoitem
poitemx = li_bapimepoitemx
conditions = li_conditions.
ENDIF.
Edited by: bhavani prasad kotharu on Aug 6, 2009 3:38 PM -
SAP Business One 8.8 System Messages
In SAP Business One 8.8 when you have entered a document with a later posting then today if you then enter a document with todayu2019s date you receive the System Message "There is a document of this type with a later posting date". If you select the option 'Block Documents with eelier posting date' you know longer receive this message however we still need to the option to do this.
I have a number of clients that would like to have the ability to turn this message on or offHi Gordon,
Yes I know you can select u2018OKu2019 and move on with the entering of a marketing document, however this is an extra click and when you are entering a large number of documents a day this can become painfully and that is the feedback from the customers, is there a reason why this could not be an option in the company settings? I know this will not happen overnight and this is why I posted the question of the development collaboration forum.
Kind regards,
Johnathon -
How can I clean up queue one-time on Sun Java system messaging 6.3
Hi,
<address>Our Email server have a problem, When I run _./imsimta qm directory tcp_local_, There are about 5 Millions of messages in the queue.</address>
Now our Email server send messages very slowly, how can I clean up queue one-time?
the command _./imsimta qclean_ is very slowly.
What can I do to prevent this problem?
our Email server version is :
Sun Java(tm) System Messaging Server 6.3-6.03 (built Mar 14 2008; 32bit)
libimta.so 6.3-6.03 (built 17:12:37, Mar 14 2008; 32bit)
SunOS email-1 5.10 Generic_120011-14 sun4u sparc SUNW,Sun-Fire-V890
Thank you !If you have more than 100,000 messages in the queue, then look at the MAX_MESSAGES parameter in [the job_controller.cnf file|http://wikis.sun.com/display/CommSuite/Job+Controller+Configuration+File]. If the parameter is not specified, it defaults to 100000. If you have more than that number of messages in the channel queues, it will take a long time for new/legitimate messages to be sent because job_controller is only considering the first 100,000 messages in the queue.
If you get into the "imsimta qm" command do do "sum -database", it will show a summary of what job_controller has in its internal cache and therefore what job_controller is working on. If you compare that to "sum -directory" you will probably see a difference.
If these are all legitimate messages, you need to increase MAX_MESSAGES, cnbuild, and restart job_controller.
If they are not, then preventing this in the future will require determining how they got into your queue and correcting that.
As for removing them, the "imsimta qm" commands allow you to select messages by various criteria and then you can "return" or "delete" them. But yes, that will take a long time if there are many messages because it is a single threaded process and it needs to open and examine each message. You may be able to accomplish the task more quickly with a shell script that works on individual channel queue subdirectories and then run multiple copies of that script in parallel. After you have cleaned out the queue, restart job_controller.
Also, you might want to consider [the subdirs channel keyword|http://msg.wikidoc.info/index.php/Subdirs_and_nosubdirs_Channel_Options]. -
Error in local message system; message 009999000035 not complete
Hello All.
I have configured Service desk in SolMan 7.0 which has patch level 14 and also configured in Satellite systems. I am using SM_...._BACK RFC connection in BCOS_CUST table. The user used by SM_...._BACK have the following roles in SolMan
SAP_SUPPDESK_CREATE,SAP_SV_FDB_NOTIF_BC_ADMIN
and SAP_SV_FDB_NOTIF_BC_CREATE.
However, when I try to create support message (Help --> Create support message) in satellite system, i am getting Error in local message system; message 009999000035 not complete.
I have also checked for Product_ID parameter which is not existing.
One important thing is, I can create support message in satellite system if I give SAP_ALL in that RFC user using in SM_...._BACK connection in SolMan.
So, this shows clearly that it is an issue with role/authorization.
Please suggest me !!
Thanks in advance.
Regards,
Satish.Hmm not really. Profiles for the roles are also generated?
Those roles/profiles should be sufficient to create support messages.
Even though you assigned SAP_ALL and it worked afterwards I cannot imagine you got an auth. problem here anymore.
When assigning SAP_ALL did you really assign SAP_ALL to the RFC user or did you assign another user (who got SAP_ALL auth.) to the RFC connection?
The user who was logged on to the satellite system when the support messages have been created (with and without SAP_ALL assigned to the RFC user) has always been the same?
Just to make sure: did you set NO_USER_CHECK = X in Sol Man tx: DNO_CUST04? -
Error in local system;message is not complete--- in Solman 4.0
Hello Solman Gurus,
After importing SP 13 in Solution Manager 4.0 , whenever i am trying from help--> create support message ; i am getting "ERROR IN LOCAL SYSTEM; MESSAGE <MSG NO> IS NOT COMPLETE "
i have seen these threads
ERROR when Trying to create support message in satellite system
ERROR when Trying to Create Support Message in Satillite system
create support message
but they are saying about Satelliate system not solman
Please help if you could
regards
NaveenNaveen,
Check if the UserId that is creating the message in SolMan via Help->Create Support Message has roles SAP_SUPPDESK_CREATE and SAP_SV_FDB_NOTIF_BC_ADMIN (the profiles of the roles must be generated, all the authorization objects should be green).
I have SolMan 4.0 SP 13 too, when I delete these authorizations from my userid, I have the same error.
Let me know if you still have the error.
Regards,
Raquel.
Maybe you are looking for
-
So, I've had a bunch of random things happen to my PowerBook lately, and I think they might be related. First my iPhoto library became corrupted. Then I somehow lost my Address Book. I've been to the Genius Bar twice to have these problems fixed, so
-
About creating an AJAX page with DML procedures using dynamic actions
About creating an AJAX page with DML procedures in APEX using dynamic actions. Help with limitations. I want to share my experience, creating AJAX procedures in APEX 4.0. LIMITATIONS • How Can I Hide UPDATE button while I press NEW button. ?? •
-
Insert Blank Row after writing record to .csv
J Developer 11.1.1.6.0 Oracle SOA 11g - BPEL I am currently performing 3 separate transformations in a bpel process. In the first transformation I extract header level information (only 1 record line) and write this to a csv file together with HEADER
-
Index out of range when trying to create a new dimension (reporting type)
I just created all my dimensions/characteristics, created 2 cubes/infocubes (rate & ownership) in my new appset called 'CONSOLIDATION' and I can't seem to create a 'reporting type cube'. When I try to create a cube called TEST or CONSO... (generic, f
-
HT201342 Why can you not use your iCloud account as your apple ID?
??