HFM Web connection problem

Having just created a new app HFM v9.3 i can access it ok on the client but when i try to open app on web version it will not open. when i made it the default app (when logged into my live app) it now just hangs with the hour glass when i try to log on. Is there something new i have to do to enable web access? i created app with own id, maybe it needed to be the server admin id?
thanks for any help/advice
Stpehen Fry
Tomkins plc

Have you tried to register the application with Shared Services? This can be done from the workspace menu Navigate > Administer > Classic Application Administration > Consolidation Administration, then select Register Application, select cluster, application and a User Management Project from the drop-down and finally press the Register button.
If you have done everything we have described up to this point and still cannot open the application from the web, I assume it might be a user thing. We normally create HFM applications with the same user that we have installed Hyperion products on the server. This user must be in the local Administrators group of Windows server.

Similar Messages

This page cannot be displayed - web connectivity problem

Just purchased an HP laptop with Windows 8 and IE 10.
I am connecting to my wireless connection because I can login and use Yahoo messenger, but cannot access any websites. When open IE, get the error: This page cannot be displayed.
There is an option to Fix Connection Issues - tried this and get the following results:
Problem with wireless adaptor or access point (not fixed)
Your computer appears to be correctly configured, but the device or resource (www.msn.com) is not responding.
Searched Google and there was a suggestion to flush the dns using command: ipconfig \flushdns. Did this, rebooted and then the home website does come up (www.msn.com). However, if I click any link on the site, I then get back to the same 'This page cannot be displayed' message.
Anyone else having this same issue or have any suggestions for resolving?
Thanks

I'm sorry your new laptop isn't working! I think I have some solutions for you and hopefully resolve your issue quickly.
(Make sure your time and date are correct!)
First, reset your router. This is done by unplugging the power from your router and modem. Once ALL the lights on both are out, wait a few seconds. Plug the modem back in, wait for the lights to come on, then the router. Give it time to access the device and assign IP addresses (this takes up to 4 minutes with some models). Once completed, try to reconnect using your HP laptop.
If that does not work, manually reset your IP address by using the command prompt (search for it using the search option on the right menu),
ipconfig /release
ipconfig /renew
This should flush the IP address. You have already reset the DNS, and you may do so again just to clear everything.
If that still does not work, hook the Ethernet cable directly into your laptop and see if it can get online. If it does, then it is a wireless connection issue and you should either return it OR have Geek Squad take a look. If it doesn't work, then either your router will NOT assign an IP address properly due to the computer having the same IP or Name as another computer on your network, or the computer could have a winsoc issue. In this case, you would have to restore the computer or
go to :
microsoft.com/fixit
And use there fix. Download it on another computer, burn to DVD/CD or drop it to a flash drive, then use it on the computer giving you the issue.
Let me know if any of these options work!
- Disclaimer: While Agent Bender is currently employed at GeekSquad, ALL posts made by Agent Bender are her personal opinions, and do not reflect the opinions or policies of Best Buy or GeekSquad. -

Problem of authorization in every Web connection

In first, sorry for my english, i'm french.
I have a problem with a windows of authorization who appear in every first web connection.
She disappears after the first choice, but my problem comes that during the launch of Chrome I made the error "block" and I have no more authorization of Google Chrome throw.
How to reactivate the permission? And how stop this window of authorization?
This is this Windows who appears (capture screen) : http://www.flickr.com/photos/67089116@N08/6868570691/
Tks a lot
Joris L.

Hello, & welcome to the forums!
It looks like you have Little Snitch installed, so you can Open Little Snitch rules, or click the forever tab on that pic/site, then click allow, it'll never ask for that sites permissions again.

Web service proxy take ~4 minutes to detect connection problem in AIX!

Dear All,
i am developing a client application that consume web service , by jdeveloper 10.1.3.1.
i found a problem, in AIX, that the web service proxy generated by jdeveloper take long time
to detect connection problem to the server (e.g. server is down, network down, invalid
ip address or port supplied).
in ms window, if the proxy can't reach the server, it throw exception within seconds.
but in ibm AIX, it take about 4 minutes !!! the time is too long until the exception is thrown.
could anybody help me?
is there something i can set to greatly shorten the hanging time when connection
problem?
thank you.

nobody experience this problem?

This Server has no web connection defined- Problem by publishing a web repo

Hello.
My problem is that when I create a query in the Bex and want to publish it on the web I get the error message:
This Server has no web connection defined.
When I enter the Url of a template directly in my browser it works.
Where do I have to define the web connection in the system - because I search now nearly 6 hours to get it to work.
Rgards
Tim

You'll need to add the icm/server_port_0 instance parameter using RZ10 as it probably does not have the port and protocol defined. SAP needs to be restarted to pick up the change. You would then need to start transaction SICF and select the services under BW, right-click and then select Activate. There are OSS notes on this as well, maybe search for SICF. Transaction SMICM can be used to verify that the services are running.

3 BUGS WITH LION CONNECTING PROBLEMS TO SOME WEB SITES & MAIL SERVERS

I HAVE 3 BUGS WITH LION FOR MORE THAN ONE MONTH & GETTING WORSE
1 - CONNECTING PROBLEMS TO SOME WEB SITES SERVERS
I TRY EVERY BROWSER I HAVE ( SAFARI \ FIREFOX \ CHROME )
I CAN NOT OPEN SOME SITES ALMOST ALL TIMES
SOME TIMES OPEN THIS SITES BUT AFTER MINUTES DO NOT CONNECT TO IT
I GET THIS BUG IN THE PAST BUT LATLY IT GONE WORSE
NOW IT IS MORE FREQUENT & MORE SITES
2 - CONNECTING PROBLEMS TO SOME MAIL SERVERS
THE MAIL APP CAN NOT CONNECT TO
( INCOMING HOTMAIL SERVER \ OUTGOING HOTMAIL SERVER \ OUTGOING YAHOO SERVER )
MOST OF THE TIME
MORE FREQUENT
3 - CHECKING OUT SHOPPING BAG FROM SHOPPING SITES PROBLEMS
I TRY TO CHECKOUT THE SHOPPING BAG IN 2 SITES & COULD NOT CHECKOUT THE ORDER
I HAD TO USE ANOTHER COMPUTER
FIRST TIME I HAVE THIS
I HAVE LITTLE SNITCH 3 ON & LION FIREWALL ON
I TRIED EVERY ACCOUNT IN THIS COMPUTER
with Little Snitch disabled   >>>>>>> i have the same problem !!!!!
with lion firewall off    >>>>>>> i have the same problem !!!!!
I STILL HAVE THE SAME CONNECTION PROBLEM
IF YOU HAVE ANY SUGGESTION PLEASE HELP ME
LION BUGS IS DRIVING ME CRAZY   IT IS BY FAR THE 2ND WORSE OS Produced by APPLE AFTER IOS 2.0 FOR IPHONE
I WANT TO GO TO LEOPARD AGAIN
IF YOU HAVE ANY IDEA HOW TO INSTALL LEOPARD TO THE NEW MACBOOK PRO
PLEASE LET ME KNOW

Biggest bug is that your key caps key gets stuck. Repost, without the all caps stuff, which is tantamount to shouting, and maybe we can read what your problems are all about.

N95 8BG "WiFi Connection problems" and "Web: no ga...

Like many users, I could not get my new Nokia (N95 8GB) to work with my WiFi. After many attempts, using the various ideas posted, I came up with a solution that works reliably for me.
First lets deal with "WiFi Connection problems"
Menu/Tools/Settings/Connection/Wireless LAN
'Show WLAN availability' = 'Yes'
'Scan for networks' = 'Every 5 minutes'
Some users have suggested choosing 'Advanced Settings' from the 'Options' menu, changing 'Automatic configuration' to 'Disabled' and the either setting 'RTS threshold' to '2346', or setting 'Power saving' to 'Disabled'. I tried both of these but they did not make any difference in my case. However they may make a difference for you, hence their inclusion here.
Menu/Tools/Settings/Connection/Access Points
Choose 'New access point' from the 'Options' menu
'Data bearer' = 'Wireless LAN'
'WLAN network name' = If your network is set to broadcast its SSID, use 'Search for networks' then select your network from the list, otherwise use 'Enter manually' and type in the SSID.
'Connection name' = anything you like, but I use the SSID
'Network status' = not sure about this maybe someone can confirm, but I think if the SSID is broadcast then it is 'public', otherwise it is 'private'.
'WLAN network mode' = match this to your access point configuration. Mine is set to 'Infrastructure', so I do not cover the ad-hoc scenario here.
'WLAN security mode' = again I am using WEP so have not covered other scenarios.
'WLAN security settings' = these should match you access point configuration.
'Homepage' = whatever you like. I use 'http://www.google.co.uk', just so that when I start browsing I get something reliable, useful, and dependable. If Google fails to appear it usually means there is something wrong with your config.
Now lets handle the dreaded "Web: no gateway reply"
Menu/Tools/Settings/Connection/Access Points
Scroll down to highlight the new access point and choose 'Edit' from the 'Options' menu. Now choose 'Advanced settings' from the 'Options' menu.
Assuming you network used IPv4, which most do in my experience, select 'IPv4 settings'. I don't know about IPv6, and don't use a proxy so these are not covered.
The values you enter in 'IPv4 settings', depend upon your network/router settings, and whether you have a DHCP server or not.
Assume your a router IP Address, on the LAN side, is 192.168.0.1, and that it has a DHCP server set to serve addresses in the range 192.168.0.64 to 192.168.0.192, using subnet 255,255,255,0. Since the mobile does not seem able to get an IP Address from the DHCP server we give it a static address 192.168.0.55. Notice this is outside the range sereved by te DHCP server to avoid conflicts.
We end up with:
'Phone IP address = '192.168.0.55'
'Subnet mask' = '255,255,255,0'
'Default gateway' = '192.168.0.1'
'DNS address' = 'user defined'
'Primary DNS address' = '192.168.0.1'
'Secondary DNS address' = '0.0.0.0'
I used something similar and was at last able to browse the web via wifi.
I hope all of the above helps someone out there.

I have just experienced this problem having been using the WiFi network for months without problems. I tries all the suggestions on these forums including the power settings, turning off WEP, and the fixed IP suggestion and none worked. I even reinstalled the firmware and reconfigured everything. It turned out to be the router. I had rebooted it several times to no effect but the DHCP always gave the N95 the same IP address lease. So I changed the range of IP addresses the DHCP could lease and restarted the N95. It got a new IP and was back working again.
If at first you don't succeed, try again. Then quit. There's no use being a damn fool about it.
-- W.C. Fields

HFM Web Sever Configuration--Keep Alive and Session Time Out Optimal Config

We recently implemented an HFM 9.3.1 environment. We are using Windows 2003 Enterprise SP2 servers with IIS6. We have two HFM Web servers connecting to an application cluster with two application servers in the cluster. We were getting some errors when trying to unlock HFM cells in Workspace, but we were able to perform the functions fine on the application using the WIN32 client.
I opened a ticket with support and they recommended modifying the subcontext.properties file located in %HYPERION_HOME%\deployments\WebLogic9\servers\Workspace\webapps\workspace\conf. They recommended changing the following settings:
#KeepAliveInterval=30
#SessionTimeout=60
From what I understand, these settings are for the communication between the HFM Web Servers and the application cluster servers. I'm wondering how changing these settings may affect our environment. Are there negative effects and/or trade-offs for changing these settings? Is there a recommended threshold or maximum value?

Hi Dinesh,
This cannot be achieved without development enhancements to some standard SAP framework component, to introduce a "keep-alive" concept. If you are using a CMS for CTI or email integration, you need to ensure it supports keeping the communications session alive also.
Sincerely,
Glenn
Glenn Abel
Covington Creative
www.covingtoncreative.com

Unable to open the HFM web server link

I am gettng the following error while connecting to the url "http://<servername>/hfm/home/LaunchPage.asp"
Error Number:1
Error Description:Please Relogin. Session has Timed out
Error Source:
Page On which Error Occurred:
I have tried setting the Full permission at the website level to the Windows Admin user as well as IUSR and IWAM. but it still didnot work.
how ever, i was unable to find the Connection timeout tab when i clicked on HFM->Properties.
Please throw some light on it.

you didn't specify the version of HFM. I am assuming you are talking about a 9.3.x or 11.1.1.x release.
In HFM 9.3.0 and 9.3.1 and above, there is no direct link to HFM web. You must login to the BI+ Workspace and use the "Navigate"->"Applications"-"Consolidation" menus to launch HFM.
This is unlike Planning where there is still a direct link straight to planning.

Fix many web access problems with IFS 9.0.1 on Solaris (and other OS's)...

When the installation is done according to the documentation,
web access does not work because the scripts that add entries to
the jserv.properties file add duplicate references to
wrapper.env and wrapper.classpath. Look at the jserv.properties
file below and look at the remarked-out (#) lines of the
duplicate references. For example, look at the references to the
wrapper.env=LD_LIBRARY_PATH
Oracle, please note this bug so the web access problems are
minimized when the product is intstalled.
Thank you,
William T.
# Apache JServ Configuration
File #
################################ W A R N I N G
# Unlike normal Java properties, JServ configurations have some
important
# extensions:
# 1) commas are used as token separators
# 2) multiple definitions of the same key are concatenated in
a
# comma separated list.
# Execution parameters
# The Java Virtual Machine interpreter.
# Syntax: wrapper.bin=[filename] (String)
# Note: specify a full path if the interpreter is not visible in
your path.
wrapper.bin=/d3/Apache/jdk/bin/java
# Arguments passed to Java interpreter (optional)
# Syntax: wrapper.bin.parameters=[parameters] (String)
# Default: NONE
wrapper.bin.parameters=-Xms64m
wrapper.bin.parameters=-Xmx128m
# Apache JServ entry point class (should not be changed)
# Syntax: wrapper.class=[classname] (String)
# Default: "org.apache.jserv.JServ"
# Arguments passed to main class after the properties filename
(not used)
# Syntax: wrapper.class.parameters=[parameters] (String)
# Default: NONE
# Note: currently not used
# PATH environment value passed to the JVM
# Syntax: wrapper.path=[path] (String)
# Default: "/bin:/usr/bin:/usr/local/bin" for Unix systems
# "c:\(windows-dir);c:\(windows-system-dir)" for Win32
systems
# Notes: if more than one line is supplied these will be
concatenated using
# ":" or ";" (depending wether Unix or Win32) characters
# Under Win32 (windows-dir) and (windows-system-dir) will
be
# automatically evaluated to match your system
requirements
# CLASSPATH environment value passed to the JVM
# Syntax: wrapper.classpath=[path] (String)
# Default: NONE (Sun's JDK/JRE already have a default classpath)
# Note: if more than one line is supplied these will be
concatenated using
# ":" or ";" (depending wether Unix or Win32) characters.
JVM must be
# able to find JSDK and JServ classes and any utility
classes used by
# your servlets.
# Note: the classes you want to be automatically reloaded upon
modification
# MUST NOT be in this classpath or the classpath of the
shell
# you start the Apache from.
wrapper.classpath=/d3/Apache/jdk/lib/tools.jar
wrapper.classpath=/d3/Apache/Jserv/libexec/ApacheJServ.jar
wrapper.classpath=/d3/Apache/Jsdk/lib/jsdk.jar
# An environment name with value passed to the JVM
# Syntax: wrapper.env=[name]=[value] (String)
# Default: NONE on Unix Systems
# SystemDrive and SystemRoot with appropriate values on
Win32 systems
wrapper.env=PATH=/d3/bin
# An environment name with value copied from caller to Java
Virtual Machine
# Syntax: wrapper.env.copy=[name] (String)
# Default: NONE
# Uncomment the following lines to set the default locale and
NLS_LANG
# setting based on the environment variables.
# wrapper.env.copy=LANG
# wrapper.env.copy=NLS_LANG
# Copies all environment from caller to Java Virtual Machine
# Syntax: wrapper.env.copyall=true (boolean)
# Default: false
# Protocol used for signal handling
# Syntax: wrapper.protocol=[name] (String)
# Default: ajpv12
# General parameters
# Set the default IP address or hostname Apache JServ binds (or
listens) to.
# If you have a machine with multiple IP addresses, this address
# will be the one used. If you set the value to localhost, it
# will be resolved to the IP address configured for the locahost
# on your system (generally this is 127.0.0.1). This feature is
so
# that one can have multiple instances of Apache JServ listening
on
# the same port number, but different IP addresses on the same
machine.
# Use bindaddress=* only if you know exactly what you are doing
here,
# as it could let JServ wide open to the internet.
# You must understand that JServ has to answer only to Apache,
and should not
# be reachable by nobody but mod_jserv. So localhost is usually a
# good option. The second best choice would be an internal
network address
# (protected by a firewall) if JServ is running on another
machine than Apache.
# Ask your network admin.
# "*" may be used on boxes where some of the clients get
connected using
# "localhost"and others using another IP addr.
# Syntax: bindaddress=[ipaddress] or [localhost] or [*]
# Default: localhost
bindaddress=localhost
# Set the port Apache JServ listens to.
# Syntax: port=[1024,65535] (int)
# Default: 8007
port=8007
# Servlet Zones parameters
# List of servlet zones Apache JServ manages
# Syntax: zones=[servlet zone],[servlet zone]... (Comma
separated list of String)
# Default: NONE
zones=root
# Configuration file for each servlet zone (one per servlet zone)
# Syntax: [servlet zone name as on the zones list].properties=
[full path to configFile]
(String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
root.properties=/d3/Apache/Jserv/etc/zone.properties
# Thread Pool parameters
# Enables or disables the use of the thread pool.
# Syntax: pool=true (boolean)
# Default: false
# WARNING: the pool has not been extensively tested and may
generate
deadlocks.
# For this reason, we advise against using this code in
production environments.
pool=false
# Indicates the number of idle threads that the pool may contain.
# Syntax: pool.capacity=(int)>0
# Default: 10
# NOTE: depending on your system load, this number should be low
for contantly
# loaded servers and should be increased depending on load
bursts.
pool.capacity=10
# Indicates the pool controller that should be used to control
the
# level of the recycled threads.
# Syntax: pool.controller=[full class of controller] (String)
# Default: org.apache.java.recycle.DefaultController
# NOTE: it is safe to leave this unchanged unless special
recycle behavior
# is needed. Look at the "org.apache.java.recycle" package
javadocs for more
# info on other pool controllers and their behavior.
pool.controller=org.apache.java.recycle.DefaultController
# Security parameters
# Enable/disable the execution of org.apache.jserv.JServ as a
servlet.
# This is disabled by default because it may give informations
that should
# be restricted.
# Note that the execution of Apache JServ as a servlet is
filtered by the web
# server modules by default so that both sides should be enabled
to let this
# service work.
# This service is useful for installation and configuration
since it gives
# feedback about the exact configurations Apache JServ is using,
but it should
# be disabled when both installation and configuration processes
are done.
# Syntax: security.selfservlet=true (boolean)
# Default: false
# WARNING: disable this in a production environment since may
give reserved
# information to untrusted users.
security.selfservlet=true
# Set the maximum number of socket connections Apache JServ may
handle
# simultaneously. Make sure your operating environment has
enough file
# descriptors to allow this number.
# Syntax: security.maxConnections=(int)>1
# Default: 50
security.maxConnections=50
# Backlog setting for very fine performance tunning of JServ.
# Unless you are familiar to sockets leave this value commented
out.
# security.backlog=5
# List of IP addresses allowed to connect to Apache JServ. This
is a first
# security filtering to reject possibly unsecure connections and
avoid the
# overhead of connection authentication.
# <warning>
# (please don't use the following one unless you know what you
are doing :
# security.allowedAddresses=DISABLED
# allows connections on JServ'port from entire internet.)
# You do need only to allow YOUR Apache to talk to JServ.
# </warning>
# Default: 127.0.0.1
# Syntax: security.allowedAddresses=[IP address],[IP Address]...
(Comma
separated list of IP addresses)
#security.allowedAddresses=127.0.0.1
# Enable/disable connection authentication.
# NOTE: unauthenticated connections are a little faster since
authentication
# handshake is not performed at connection creation.
# WARNING: authentication is disabled by default because we
believe that
# connection restriction from all IP addresses but localhost
reduces your
# time to get Apache JServ to run. If you allow other addresses
to connect and
# you don't trust it, you should enable authentication to
prevent untrusted
# execution of your servlets. Beware: if authentication is
disabled and the
# IP address is allowed, everyone on that machine can execute
your servlets!
# Syntax: security.authentication=[true,false] (boolean)
# Default: true
security.authentication=false
# Authentication secret key.
# The secret key is passed as a file that must be kept secure
and must
# be exactly the same of those used by clients to authenticate
themselves.
# Syntax: security.secretKey=[secret key path and filename]
(String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
#security.secretKey=./etc/jserv.secret.key
# Length of the randomly generated challenge string (in bytes)
used to
# authenticate connections. 5 is the lowest possible choice to
force a safe
# level of security and reduce connection creation overhead.
# Syntax: security.challengeSize=(int)>5
# Default: 5
#security.challengeSize=5
# Logging parameters
# Enable/disable Apache JServ logging.
# WARNING: logging is a very expensive operation in terms of
performance. You
# should reduced the generated log to a minumum or even disable
it if fast
# execution is an issue. Note that if all log channels (see
below) are
# enabled, the log may become really big since each servlet
request may
# generate many Kb of log. Some log channels are mainly for
debugging
# purposes and should be disabled in a production environment.
# Syntax: log=[true,false] (boolean)
# Default: true
log=true
# Set the name of the trace/log file. To avoid possible
confusion about
# the location of this file, an absolute pathname is recommended.
# This log file is different than the log file that is in the
# jserv.conf file. This is the log file for the Java portion of
Apache
# JServ.
# On Unix, this file must have write permissions by the owner of
the JVM
# process. In other words, if you are running Apache JServ in
manual mode
# and Apache is running as user nobody, then the file must have
its
# permissions set so that that user can write to it.
# Syntax: log.file=[log path and filename] (String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
log.file=/d3/Apache/Jserv/logs/jserv.log
# Enable the timestamp before the log message
# Syntax: log.timestamp=[true,false] (boolean)
# Default: true
log.timestamp=true
# Use the given string as a data format
# (see java.text.SimpleDateFormat for the list of options)
# Syntax: log.dateFormat=(String)
# Default: [dd/MM/yyyy HH:mm:ss:SSS zz]
log.dateFormat=[dd/MM/yyyy HH:mm:ss:SSS zz]
# Since all the messages logged are processed by a thread
running with
# minimum priority, it's of vital importance that this thread
gets a chance
# to run once in a while. If it doesn't, the log queue overflow
occurs,
# usually resulting in the OutOfMemoryError.
# To prevent this from happening, two parameters are used:
log.queue.maxage
# and log.queue.maxsize. The former defines the maximum time for
the logged
# message to stay in the queue, the latter defines maximum
number of
# messages in the queue.
# If one of those conditions becomes true (age > maxage || size
maxsize),# the log message stating that fact is generated and the log
queue is
# flushed in the separate thread.
# If you ever see such a message, either your system doesn't
live up to its
# expectations or you have a runaway loop (probably, but not
necessarily,
# generating a lot of log messages).
# WARNING: Default values are lousy, you probably want to tweak
them and
# report the results back to the development team.
# Syntax: log.queue.maxage = [milliseconds]
# Default: 5000
log.queue.maxage = 5000
# Syntax: log.queue.maxsize = [integer]
# Default: 1000
log.queue.maxsize = 1000
# Enable/disable logging the channel name
# Default: false
# log.channel=false
# Enable/disable channels, each logging different actions.
# Syntax: log.channel.[channel name]=[true,false] (boolean)
# Default: false
# Info channel - quite a lot of informational messages
# hopefully you don't need them under normal circumstances
# log.channel.info=true
# Servlets exception, i.e. exception caught during
# servlet.service() processing are monitored here
# you probably want to have this one switched on
log.channel.servletException=true
# JServ exception, caught internally in jserv
# we suggest to leave it on
log.channel.jservException=true
# Warning channel, it catches all the important
# messages that don't cause JServ to stop, leave it on
log.channel.warning=true
# Servlet log
# All messages logged by servlets. Probably you want
# this one to be switched on.
log.channel.servletLog=true
# Critical errors
# Messages produced by critical events causing jserv to stop
log.channel.critical=true
# Debug channel
# Only for internal debugging purposes
# log.channel.debug=true
#wrapper.classpath=/d3/ord/jlib/ordim.zip
#wrapper.classpath=/d3/ord/jlib/ordhttp.zip
# Oracle XSQL Servlet
wrapper.classpath=/d3/lib/oraclexsql.jar
# Oracle JDBC
wrapper.classpath=/d3/jdbc/lib/classes12.zip
# Oracle XML Parser V2 (with XSLT Engine)
wrapper.classpath=/d3/lib/xmlparserv2.jar
# Oracle XML SQL Components for Java
wrapper.classpath=/d3/rdbms/jlib/xsu12.jar
# XSQLConfig.xml File location
wrapper.classpath=/d3/xdk/admin
# Oracle BC4J
wrapper.classpath=/d3/ord/jlib/ordim.zip
wrapper.classpath=/d3/ord/jlib/ordvir.zip
wrapper.classpath=/d3/ord/jlib/ordhttp.zip
wrapper.classpath=/d3/BC4J/lib/jndi.jar
wrapper.classpath=/d3/BC4J/lib/jbomt.zip
wrapper.classpath=/d3/BC4J/lib/javax_ejb.zip
wrapper.classpath=/d3/BC4J/lib/jdev-rt.jar
wrapper.classpath=/d3/BC4J/lib/jbohtml.zip
wrapper.classpath=/d3/BC4J/lib/jboremote.zip
wrapper.classpath=/d3/BC4J/lib/jdev-cm.jar
wrapper.classpath=/d3/BC4J/lib/jbodomorcl.zip
wrapper.classpath=/d3/BC4J/lib/jboimdomains.zip
wrapper.classpath=/d3/BC4J/lib/collections.jar
wrapper.classpath=/d3/Apache/Apache/htdocs/onlineorders_html
#wrapper.classpath=/d3/Apache/Apache/htdocs/OnlineOrders_html/Onl
ineOrders.jar
# The following classpath entries are necessary for EJBs to run
in IAS or DB when
present
wrapper.classpath=/d3/lib/aurora_client.jar
wrapper.classpath=/d3/lib/vbjorb.jar
wrapper.classpath=/d3/lib/vbjapp.jar
# Oracle Servlet
wrapper.classpath=/d3/lib/servlet.jar
# Oracle Java Server Pages
wrapper.classpath=/d3/jsp/lib/ojsp.jar
# Oracle Util
wrapper.classpath=/d3/jsp/lib/ojsputil.jar
# Oracle Java SQL
wrapper.classpath=/d3/sqlj/lib/translator.zip
# Oracle JDBC
#wrapper.classpath=/d3/jdbc/lib/classes12.zip
# SQLJ runtime
wrapper.classpath=/d3/sqlj/lib/runtime12.zip
# Oracle Messaging
wrapper.classpath=/d3/rdbms/jlib/aqapi.jar
wrapper.classpath=/d3/rdbms/jlib/jmscommon.jar
# OJSP environment settings
#wrapper.env=ORACLE_HOME=/d3
# The next line should be modified to reflect the value of the
SID for your
webserver.
#wrapper.env=ORACLE_SID=cmpdb
#wrapper.env=LD_LIBRARY_PATH=/d3/lib
## Enable the flag below if you are using jdk 1.2.2_05a or above
#wrapper.env=JAVA_COMPILER=NONE
# Advanced Queuing - AQXML
wrapper.classpath=/d3/rdbms/jlib/aqxml.jar
#wrapper.classpath=/d3/rdbms/jlib/xsu12.jar
#wrapper.classpath=/d3/lib/xmlparserv2.jar
wrapper.classpath=/d3/lib/xschema.jar
#wrapper.classpath=/d3/jlib/jndi.jar
wrapper.classpath=/d3/jlib/jta.jar
oemreporting.properties=/d3/Apache/Jserv/oemreporting/oemreportin
g.properties
zones = root, oemreporting
wrapper.classpath=/d3/jlib/share-opt-1_1_9.zip
wrapper.classpath=/d3/jlib/caboshare-opt-1_0_3.zip
wrapper.classpath=/d3/jlib/marlin-opt-1_0_7.zip
wrapper.classpath=/d3/jlib/tecate-opt-1_0_4.zip
wrapper.classpath=/d3/jlib/ocelot-opt-1_0_2.zip
wrapper.classpath=/d3/jlib/regexp.jar
wrapper.classpath=/d3/jlib/sax2.jar
#wrapper.classpath=/d3/jlib/servlet.jar
wrapper.bin.parameters= -DORACLE_HOME=/d3
#wrapper.env=LD_LIBRARY_PATH=/d3/lib32
wrapper.env.copy=DISPLAY
wrapper.bin.parameters=-DORACLE_HOME=/d3
#wrapper.classpath=/d3/lib/vbjorb.jar
#wrapper.classpath=/d3/lib/vbjapp.jar
wrapper.classpath=/d3/classes/classesFromIDLVisi
wrapper.classpath=/d3/jlib/swingall-1_1_1.jar
wrapper.classpath=/d3/jlib/ewtcompat3_3_15.jar
wrapper.classpath=/d3/jlib/ewt-3_3_18.jar
wrapper.classpath=/d3/jlib/share-1_1_9.jar
wrapper.classpath=/d3/jlib/help-3_2_9.jar
wrapper.classpath=/d3/jlib/ice-5_06_3.jar
wrapper.classpath=/d3/jdbc/lib/classes111.zip
wrapper.classpath=/d3/classes
wrapper.classpath=/d3/jlib/oembase-9_0_1.jar
wrapper.classpath=/d3/jlib/oemtools-9_0_1.jar
wrapper.classpath=/d3/jlib
wrapper.classpath=/d3/jlib/javax-ssl-1_1.jar
wrapper.classpath=/d3/jlib/jssl-1_1.jar
wrapper.classpath=/d3/jlib/netcfg.jar
wrapper.classpath=/d3/jlib/dbui-2_1_2.jar
#wrapper.classpath=/d3/lib/aurora_client.jar
#wrapper.classpath=/d3/lib/xmlparserv2.jar
wrapper.classpath=/d3/network/jlib/netmgrm.jar
wrapper.classpath=/d3/network/jlib/netmgr.jar
wrapper.classpath=/d3/network/tools
wrapper.classpath=/d3/jlib/kodiak-1_2_1.jar
wrapper.classpath=/d3/sysman/jlib/netchart360.jar
wrapper.classpath=/d3/jlib/pfjbean.jar
wrapper.env=SHLIB_PATH=/d3/lib32
wrapper.env=LIBPATH=/d3/lib32
wrapper.classpath=/d3/ultrasearch/lib/isearch_midtier.jar
wrapper.classpath=/d3/ultrasearch/lib/isearch_query.jar
wrapper.classpath=/d3/ultrasearch/lib/jgl3.1.0.jar
wrapper.classpath=/d3/lib/mail.jar
wrapper.classpath=/d3/lib/activation.jar
wrapper.classpath=/d3/ultrasearch/jsp/admin/config
# Additions for iFS
## DO NOT REMOVE OR ALTER THE FOLLOWING LINE ....
# iFS true
# Uncomment if you want to use the same Jserv as other
applications
wrapper.classpath=/d3/9ifs/custom_classes
wrapper.classpath=/d3/9ifs/settings
wrapper.classpath=/d3/9ifs/lib/adk.jar
wrapper.classpath=/d3/9ifs/lib/email.jar
wrapper.classpath=/d3/9ifs/lib/http.jar
wrapper.classpath=/d3/9ifs/lib/release.jar
wrapper.classpath=/d3/9ifs/lib/repos.jar
wrapper.classpath=/d3/9ifs/lib/utils.jar
wrapper.classpath=/d3/9ifs/lib/webui.jar
wrapper.classpath=/d3/9ifs/lib/provider.jar
wrapper.classpath=/d3/jlib/javax-ssl-1_2.jar
wrapper.classpath=/d3/jlib/jssl-1_2.jar
wrapper.env=ORACLE_HOME=/d3
wrapper.env=ORACLE_SID=cmpdb
wrapper.env=LD_LIBRARY_PATH=/d3/lib:/d3/ctx/lib:/d3/lib32
wrapper.env=NLS_LANG=.US7ASCII
## Additions for the iFS zone
# Uncomment if you want to use the same Jserv as other
applications
zones=ifs
ifs.properties=/d3/Apache/Jserv/etc/ifs.properties
# End iFS section

About your home page; Manually set up Firefox with the window(s) and tab(s)
the way you want them to be. Then;
'''''Firefox Options > General > Homepage'''''.
Press the button labeled ''''Use Current'''.'
=====================================
Open a new window or tab. In the address bar, type '''''about:config'''''.
If a warning screen comes up, press the '''''Be Careful''''' button.
This is where Firefox finds information it needs to run.
At the top of the screen is a search bar. Enter '''''browser.newtab.url'''''
and press enter. '''''browser.newtab.url'''''
tells Firefox what to show when a new tab is opened.
If you want, right click and select '''''Modify'''''. You can change the
setting to; about:home (Firefox default home page), 
about:newtab (shows the sites most visited), 
about:blank (a blank page), 
or you can enter any web page you want. 
The same instructions are used for the new window setting, listed as
'''''browser.startup.homepage'''''.

Can't re-add printer after removing from eprint center - 'Web Services Problem'

I have an HP Photosmart Premium C310 series printer (Model Number CN503B) which I have been using with ePrint for about 18 months. Aside from intermittent issues it has worked, I use a chromebook most of the time so rely on the ePrint option via Google Cloud Print.
Last week it stopped working, with every job in the list showing as cancelled. Following advice on the forum I removed the email address of the printer from the eprint center. I thought it would then be simple to add the printer back. However, I have been unable to connect the printer to the web service so I cannot create the code I need to add the printer back.
STEPS TO REPRODUCE:
1. Factory reset printer settings
2. Factory reset network settings
3. Restart printer and Reboot router
3. Settings -> Network -> Wireless Setup Wizard
4. Choose correct SSID, enter password for WPA
5. ‘Connected to Network’
6. Settings -> Web -> Enable Web Services
7. ‘Accept terms’ screen -> Accept
8. ‘Checking for product updates’ screen shows briefly then returns to 'accept terms' screen
9. Next it makes a ping sound and shows ‘Web Services Problem’ ‘Problem connecting to Web Services Server’, it then pings again a few seconds later (which ties in with what I see in the network logs as a second attempt)
10. Log on to printer via web interface and set IP address of printer to manual IP outside DHCP range (as advice on other threads in this forum). Check DNS setting valid (same as gateway server which all other devices on network are also using successfully as DNS)
11. Repeat steps 6 and 7 - still same error message
I consider myself technically savvy and have followed all advice I can find on this forum including the following:
1. reverting to printer and network defaults
2. rebooting router
3. assigning static IP address to printer outside of DHCP range of router
4. connecting to printer via web interface and setting DNS to variously: same as gateway, google DNS (8.8.8.8), ISP DNS
5. adjusting firewall settings on router to explicitly allow and log outbound connection on the HP ports (already had a rule allowing all outbound connections)
As mentioned, the printer worked fine with ePrint previously so I suspect the ePrint server is rejecting a request from my printer for some reason, maybe because there is old / corrupt data on the server regarding my specific printer.
I’m logging outbound traffic from the printer and here are what the router logs show me (printer IP replaced with 192.168.x.x below, even though it is not public )
Thu, 2013-04-11 09:13:42 - TCP Packet - Source:192.168.x.x, 36475 Destination:15.201.202.81,80 - [HTTP rule match]
Thu, 2013-04-11 09:13:43 - TCP Packet - Source:192.168.x.x, 51463 Destination:15.201.224.79,443 - [HTTPS rule match]
Thu, 2013-04-11 09:13:44 - TCP Packet - Source:192.168.x.x, 53044 Destination:15.201.224.79,443 - [HTTPS rule match]
Thu, 2013-04-11 09:13:44 - TCP Packet - Source:192.168.x.x, 51463 Destination:15.201.224.79,443 - [HTTPS rule match]
Thu, 2013-04-11 09:13:44 - TCP Packet - Source:192.168.x.x, 53044 Destination:15.201.224.79,443 - [HTTPS rule match]
Thu, 2013-04-11 09:13:51 - TCP Packet - Source:192.168.x.x, 64270 Destination:15.201.224.79,443 - [HTTPS rule match]
Looks like both are HP sites: first is 'g4t2674.houston.hp.com' and the second secure one is ‘registration-pro-site2eprint.houston.hp.com’ which sound likely to be correct. That suggests the DNS is working but that the registration server doesn’t like the request for some reason.
I had the printer registered for Google Cloud Print but I have now deleted that also and it doesn’t seem to have made any difference (assume it just formats and forwards to the HP ePrint email anyway).
One hack that sheds some further light is to switch off wifi on the printer and then switch on ePrint. Eprint gives an error but stays set as 'on'. When I then switch wifi back on I can then at least check for product updates (it tells me I have the latest product updates). However, web services are still a 'no go'. Network traffic for that product update exchange looks like this:
Thu, 2013-04-11 10:14:51 - TCP Packet - Source:192.168.x.x,63960 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,63938 Destination:15.240.238.56,80 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,63960 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,39054 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,63938 Destination:15.240.238.56,80 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,39054 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x,63960 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x,63938 Destination:15.240.238.56,80 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x,39054 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x,63938 Destination:15.240.238.56,80 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x ,39054 Destination:2.16.226.12,443 - [Any(ALL) rule match]
So clearly the printer can communicate to those servers well enough to find it has the latest firmware.
I realise this is a lot of information but hopefully some of it is helpful for troubleshooting.
Thank you in advance for any help!

The issue disappeared this weekend. I didn't change anything so it must have been something server side. I notice others with the same issue have also seen it resolved.
Thanks to all those who contributed and tried to help out. Although disappointed I went for a long time without ePrint I'm glad that action was apparently taken to resolve in the end.

Yet another Music Store Connection Problem

First time iPod/iTunes user. Just Installed iTunes 5.0.1.4.
I Get The Error Message: iTunes could not connect to the music store. The network connection Timed Out.
I tried many of the suggestions that were posted to no avail.
Whatever iTunes is doing it seems to be pretty anti-social when it comes to network I/O. I noticed that when I operate iTunes, IE couldn't see any web sites. So I stopped iTunes, opened a command window and started the command "ping yahoo.com -t". It responded normally and uneventfully. But once I restarted iTunes, the ping results started timing out. I get the same result when I ping my router instead.
Any Ideas ???

Well.... This has been a hot topic in these forums for a long time. I had this problem for at least 6 months without a resolution. The answers usually involve turning off a software firewall like the new Windows XP security center or Norton firewall. Believe me when I tell you I tried everything to fix this including turning off all firewalls. I eventually was able to find a copy of Itunes 4.7 and have been using that successfully (being able to connect to the music store).
I solved all my connection problems yesterday. I started up my disabled Zone Alarm Firewall program. I went to the allowed to pass through program list and clicked allow for all the programs that connect. Now every thing works great and I was able to install the latest Itunes for windows & connect to the store. The Zone alarm is running as well as the windows security center firewall. I think the Zone Alarm has opened up communication ports that the window security won't. I know many of you will think that I am an idiot. Maybe I am but I got the darn thing working. My belief is that this is not an Apple malfunction. I take back all my curses at them.

IPOD CONNECTIVITY PROBLEM WITH WINDOWS XP VIA USB 2.0

Enough is enough.
I have an ipod touch and I am having difficulty connecting it to my pc via usb 2.0.
I have searched the entire web and came across many cases similar or the same as mine. It's time for apple to face the fact that there is something wrong with either the apple mobile service or the apple usb drivers or the itunes software that causes connectivity problems with win xp.
For the record my case is this:
I got my itouch 3 days ago. I installed itunes 8.0. Then I plugged in my ipod to a usb extension cable port connected to a usb at the back of my desktop computer. At first I got the "this usb device can perform faster if you plug it to a usb 2.0 port etc." message. So I did. I removed the extension cable and connected it directly to one of the usb ports at the back. The first time it synchronized, it seemed fine. So I decided before I do anything with it, to update it to the 2.1 version. I made my account and bought (very bad policy there apple, it should be free or at least cheeper than 8 euro) the 2.1 update. I clicked to update the i-touch. While it was updating it crashed during the restore process (because it was disconnected but I didn't know that at the time). I unplugged it, resetted and plugged it back and managed to continue the restoring process until it was updated. After figuring out itunes I chose the "manage files manually option", kept everything unchecked in the sync options except the applications. I noticed there were random disconnections here and there but I didn't pay much attention because they weren't very frequent.
The next day I plug in the touch again and suddenly I hear that annoying "connecting-disconnecting" sound from windows while my touch kept disappearing and reappearing in itunes. Suddenly my playlists disappeared from the touch. Nothing was in the touch any more. How could that happen since i had chosen to manage my files manually instead of synchronizing? So I unplugged the touch again, restarted the touch, restarted the pc, stopped and restarted the apple mobile service, unistalled and reinstalled itunes, searched microsoft support and read many usb troubleshooting documents in the web. Nothing happened. The touch randomly keeps disconnecting from the usb. I eventually managed to put my stuff back in and keep them there.
Here's what I know:
1) There is nothing wrong with my usb ports. I don't use usb hubs, they are usb 2.0, the voltage (500mA) is correct in the device manager. Everything else works fine there.
2) The ipod touch does not support disk mode so you can't see it under "my computer" and this is not a problem.
3)There is nothing wrong with the ipod, it works perfectly.
4) This is not a usb cable physical problem.
5) The five R's are irrelevant with this situation.
Uninstalling and reinstalling itunes doesn't solve the problem, neither does hard resetting the ipod.
6) Older PC configurations seem to be more affected by this but it doesn't have to do with unsupported specific chipsets.
Here's what needs investigating:
1) There may be a problem with the apple mobile service running on win XP.
2) There may be a problem with the apple usb driver and win XP or older motherboards.
3) There may be a 2.1 firmware issue with usb 2.0 connectivity.
Workaround so you don't go nuts:
Use USB 1.1 instead of 2.0. It is A LOT slower but it keeps the connection stable and you can work with the ipod. Just start copying and go do something else for the next hour. So far it works for me.
This is a serious issue that needs immediate attention. I've stumbled across forum discussions dating to 2005 with this problem (with older ipods of course).

I think this needs to be put down to the eternal PC/Mac argument. Apple dont want to fix this as they want everyone to buy a Mac. Its a business, understandable, but in turning away PC buyers they alienate a huge percentage of the market.
Now, I had my first iTouch stolen. It synced, for the most part, very well, just occasionally it removed settings and music, but ticking boxes each time I sync'd sorted that, Its a workflow procedure.
SO, now that my Touch has been replaced, iTunes cannot see it. The PC can identify it on USB1 or USB2, My work lap top can see it and has indeed upgraded it to V2 software, just in case that was the issue, but no. For some really weird reason Itunes on my desktop cannot see the new pod.
This does not make sense with the argument that Apple software doesnt work on a PC, but doesnt help that none of the Apple support staff, phone or in-store have a clue about Windows operations.
Because my Touch has now been trying to connect to 6 separate installs of itunes, multiple USB ports, multiple USB cables, a complete overhaul of the registry settings (everything else still works), and the loss of all my previous settings and backups from the last Touch... but still, the PC says its an ipod but cant install it, iTunes sits there, dumb.
The only thing I can do now is sell the device as brand new as it has never had music on it and is just a week old...
It has changed the MiniMac I was going to have for my new flat screen TV into a PC and suggests that anyone with a PC should stick to devices that run on PC, of which there are many, just without the user interface of the dear departed IPod Touch.
Thanks

RFC connection problem during SRM - R/3 integration

Hi,
Our environment is SRM 5.5 server with 2 R/3 backend systems. One of the R/3 systems is in another country. We happen to have RFC problems during the communication between the SRM and R/3 server.
Below you can find the SM21 log related to an operation on SRM server. What might be the reason for this problem? Does anyone know the solution?
Many thanks
Details Page 2 Line 26 System Log: Local Analysis of sapsrmt                  1
Time
Type
Nr
Clt
User
TCode
Grp
N
Text
10:24:58
DIA
000
013
EMREK
R4
9
Communication error, CPIC return code 020, SAP return code 223
Communication error, CPIC return code 020, SAP return code 223
Details
Recording at local and central time........................ 07.12.2006 10:24:58
Task......
Process
User......
Terminal
Session
TCode
Program
Cl
Problem cl
Package
91342
Dialog work process No. 000
EMREK
XXXXXXXX
2
K
SAP Web AS Problem
STSK
Further details for this message type
Module nam
Line
Error text
Caller....
Reason/cal
thxxhead
7192
020223
ThRecei
CPIC-Er
Documentation for system log message R4 9 :
A CPIC function has failed. The conversation ID and CPIC function are
specified in the system log entries. Use the conversion ID to find more
detailed information about the error in the system log for the SAP
gateway.
Meaning of the SAP return codes:
1) Gateway errors:
221,,Error in CPIC-SS
222,,Storage bottleneck
223,,Network read error
224,,Network write error
225,,Invalid request
226,,No connection yet
227,,Gateway process terminated
228,,Shared-Memory problem(read)
229,,Shared Memory problem(write)
230,,No free LU
231,,No free gateway process
232,,Error when starting gateway proc.
233,,Incorrect communication type
234,,Connection setup failed
235,,Error in comm. table
236,,No connection to gateway
237,,Connection to gateway closed
238,,Error in GW command (write)
239,,Error in GW comm.   (read)
240,,Invalid length
241,,Invalid environment
242,,Timeout
243,,Error setting up SAP connection
244,,Partner has closed connection
245,,Storage overflow
246,,Incorrect APPC header version
247,,APPC server not started
248,,Error accessing TXCOM
249,,Comm. table is full
630,,Invalid mode no. received
631,,Max.no. of gateways reached
632,,No LU specified
633,,Max.no. of clients reached
634,,Invalid TP name
635,,fork failed
636,,Invalid NI handle
637,,rexec failed
638,,TP start failed
639,,NiDgSend failed
640,,Internal error
664,,Gateway host is unknown
665,,Gateway service unknown
666,,NI error
667,,exec failed
668,,R/2 restarted
669,,Symb. destination too long
670,,No more side-info entries
672 ,,Logon to NetWeaver failed
673 ,,IMS Error Purging
674 ,,Timeout for registered programs
676 ,,TP not registered
677 ,,Timeout for registered programs
678 ,,TP is registered
679 ,,TP is not registered
720 ,,Security breach of registered programs
721 ,,SNC deactivated
722 ,,SNC required
723 ,,SNC name not defined
724 ,,Default SNC name not permitted
725 ,,Protocol does not support SNC
726 ,,No local SAP System
727 ,,SNC required
728 ,,Conversation ID not found
729 ,,SNS must do the communication
730 ,,Start of external programs deactivated
731 ,,Gateway shut down
732 ,,No external programs
733 ,,Conversation ID does not match
734 ,,Net conversation error
735 ,,Monitor is not active
736 ,,Conv-ID is not unique
Errors in the CPIC Interface:
450 ,,No storage
451,,No side-info entry
452,,TP-START failed
453,,No initialization
454,,"getlu" failed
455,,"signal" failed
456,,Timeout during conn. setup
457,,CMALLC failed
458,,CMSEND failed
459,,Prepare-To-Receive failed
460,,"mc_flush" failed
461,,CMRCV failed
462,,Argument missing
463,,"get_allocate" failed
464,,CMDEAL failed
465,,TP-END failed
466,,Max.no.of conv. reached
467,,"snaopen" failed
468,,"snactl" failed
469,,No flush in IBM environment
470,,"snaclse" failed
471,,Status error
472,,No side-info entry
473,,No conversation
474,,Connection closed manually
475,,Connection closed automatically
476,,No partner found
477,,Confirm failed
478,,Confirmed failed
479,,GWHOST not in side-info entry
480,,GWSERV not in side-info e.
481,,PROTOCOL not in side-info entry
482,,LU not in side-info e.
483,,TP not in side-info entry
484,,No conn.to gateway
485,,gethostname failed
486,,SAP_CMACCP not executed
487,,Program not in argument list
488,,Host not in argument list
489,,Service not in argument list
490,,Conv-ID not in argument list
491,,Invalid parameter
492,,LU62CVCT failed
493,,LU62ATTCH failed
494,,No CONV table
495,,Incorrect conv.table
496,,Invalid conv modification
497,,NiHostToAddr failed
498,,NiAddrToHost failed
499,,Read operation tab.THOST failed
500 ,,No side info file exists
501 ,,CMRCV failed
Technical details
File
Offset
RecFm
System log type
Grp
N
variable message data
6
245700
m
Error (Function,Module,Row)
R4
9
020223                                ThReceiCPIC-Erthxxhead7192

Hi,
It will be very difficult to solve without being on the customer site and having all information.
Right now, the error code is network error...
Kind regards,
Yann

2504 controller + 2602 APs = wireless clients connectivity problems

Hello, everybody!
I have a connectivity problems of wireless clients. The symptoms are:
1) Some clients receive 169.254.x.x., instead a correct DHCP addresses, less in a minute connection drops, and in controller's "Monitor" > "Clients" tab these clients are marked as "Excluded".
2) Most of the clients receive the correct addresses from DHCP (192.168.2.x), but also loose connection soon.
3) Wireless clients with correct addresses can't ping each other, gateway and an address of the controller's dynamic interface (all of them are in same subnet).
4) And the most suspicious problem is that some machines are unable to connect to APs after several attemps to do that. I mean, I configure controller and change some options, trying to understand, whether they were applied or not and constantly connect and disconnet certain PC to the SSID. After five or ten attempts I can't connect to the SSID. During these attempts, the others PCs stay connected, without interruptions, and they could be reconnected again. It's like some kind of port security works, but I'm not sure...
Do you have any ideas which options should I configure?
My configuration:
I have three interfaces on the controller: virtual, management (default) and dynamic (it is set to the WLAN)
I have one SSID, WPA/WPA2, AES/TKIP, authentication PSK.
My clients are a/b/g/n, all are permitted on the controller. No custom security policies were applied.
All the devices are in a single room: controller, one AP and different clients: desktop, notebooks, iPad, Nokia Lumia, etc.
I have an internal DHCP Server on the controller and it works perfectly well.
I can provide all the screenshots required from web-interface of the controller...
Many thanks in advance for all ideas that you have about these problems...

Hi, there!
The problem was solved.
1) APIPA address receives only single machine with Win8 - I think there are some firewall issues
2) Other devices have been loosing connection because they were mobile devices, like iPad and Lumia. If you keep working with it, it doesn't drop the connection
3) The dynamic interface address and gateway address were inaccessible because i had not used an appropriate port on the controller. =)))) Firstly, it was just a guess, but it proved.
Now, everything works with WPA2, AES, PSK...
It is a very good day!)
The only question remains: why I can't connect machines, which have a static IP? During the controller initialization, I said "yes" for permitting static IPs...
Guys, many thanks for your help!

HFM Web connection problem

Similar Messages

Maybe you are looking for