HFR Range from and to - Not working correctly for hierarchies?

Hi All,
Can anyone help me with my below issue relating to ranges in Oracle’s Hyperion Financial Reporting Studio tool.
The issue I’m experiencing is that when I create a report and use the ‘Add Relationship’ -> ‘Range’ option for my month dimension, the correct months are returned as long as the start month and end month are not the same.
In our setup we have 2 month hierarchies, one for the fiscal year (July to June) and another for the calendar year (January to December). The problem that I’m noticing in the report, is that when I enter a range from July to July, that instead of returning July, it returns July, August, September, October, November, December, January, February, March, April, May, June, July. My though it that it is looping through both the fiscal and the calendar hierarchies to return the range, instead of only the fiscal hierarchy. Both these hierarchies have the same members, however ordered differently.
Does anyone know of a way to resolve this within HFR?
I noticed that when creating the range, there is an option to ‘select a hierarchy’. At the moment there is only 1 choice ‘ Period’, however I’m curious if I could create and link a hierarchy to the fiscal hierarchy, that this might resolve the problem?
Any ideas?
Thanks,
Lance

Hi Lance,
IIRC Range uses the first (main) hierarchy - so you'll need to move the Fiscal year one to be first in the outline.
Cheers, Iain

Similar Messages

Update --PSE 11 - MacOX 10.7.5 -MORE-Printer and Profiles Not Working Correctly for first print

Adobe seem to have implemented the CS5 print screen format.
PSE11
1. page setup the entire OSX print screen comes up where you then set all your settings including paper type, paper size and all other things including paper format, colorsync or epson etc.     you then save it       and finally go to print.    completely different.
2. options select profile
3. print
it also seems everytime you go to print the actual paper size is not remembered you must go in select page set up again   do nothing then go out and it adjusst itself again. Yes, my osx preference file is set recognize this printer as my primary printer.
More as the story unfolds.    I have yet to hear if anyone have this problem.
cheers elo

It does seem like strange behavior but thanks for sharing the work around.

PSE 11 - MacOX 10.7.5 -MORE-Printer and Profiles Not Working Correctly for first print

As suggested by adobe support contacted Epson.   What I expected no help. Since it works ok with PSE10, PSE 9, CS5 it could not be their problem.
However PSE 11 have changed something in the sequence of events.
I then downloaded a trial version of Lightroom 4.   no problem everything works.
I have been offered a refund for PSE11.     That is not encourageing. Does that mean wait for PSE12?????
I developed a bypass - every time I start up PSE11 I just print a dummy image thumb nail size.   then go on to regular printing and all works.
original discussion
Macosx 10.7.5
When I start up PSE11 and go to print I set up the paper size then select a Printer Profile. When print the image it is a mess and seem to be black and white it is as if I printed on the wrong side of the paper.
I then go and try to print it again.   Now it all works as it should beutiful colours and spot on. all other print following this works.
Then I shut down PSE11.   Start it up again. Guess what first print is a mess again.   all others after are fine.
I uninstalled PSE11, deleted prefs. and reinstalled PSE11.    Same thing..   first print a mess all others ok.
the issue can be replicated consistantly......
no problems with PSE10 or PSE9
any suggestions?????
cheers elo

It does seem like strange behavior but thanks for sharing the work around.

Sorting not working correctly for date field in alv report

Hi All,
My report displays many rows also containing date type fields of bldat,budat .
When I sort the report selecting field of type bldat budat the sorting is not correct for the year.
Ex:
Invoice doc dat
01-25-2011
01-21-2011
02-02-2011
10-25-2010
11-20-2010
If I use ascending then it is sorted as :
Invoice doc dat
01-21-2011
01-25-2011
02-02-2011
10-20-2010
10-25-2010
Why the sorting is not working correct for year.(2010 records should have been first).
The field wa_tab-bldat is of type char10.
It is populated as wa_tab-bldat = bsak-bldat.
Kindly suggest what can be done.

The field wa_tab-bldat is of type char10
Then what it does is correct.
Refer to type datum...it will work

I have an iPhone 4 on contract and its not working correctly , what should I do ?

I have an iPhone 4 on contract , I only have this 5 and a half months and the iPhone is not working correctly and i do not have insurance .. What should I do ??

It sounds like you did not purchase it at the Apple store? That doesn't matter - you can still take it to Apple to troubleshoot it.
You can also try to troubleshoot it with the help of the folks here - if you want to do that, let me know and I'll ask that your post be moved to the iPhone forum where you're more likely to get knowledgeable answers, ok.

Email pushing not working correctly for office email - 3 seperate devices/carriers

We switched email hosts several months ago and since our email pushing has not worked correctly. Our host/IT guy has been very unwilling to help me through this (I get the pleasure of being the in-house IT source)
I personally am on AT&T have no problems with the other 3 emails I have set up on my blackberry. However I receive my work account one time a day at roughly 6:15. Another user is on Alltel and he receives spotty emails throughout the day, but his gmail account comes through instantly. The third user is on nextel and he receives his 2-3 times per day.
I began to think this was an email host issue since the three of us are all on different carriers, until I found out a fourth user, also on nextel, receives his emails fine.
Users 1-3 are on Outlook 07 on various versions of the Curve. We have all our messages to stay on the server.
User 4 is on the older nextel blackberry push to talk, and is not on outlook.
We do not have an exchange server. Our emails were all set up through our devices.
Any suggestions? The answers I have received through our carriers is to make sure that our messages are set to be left on the server. Everyone else at the office has given up - but for me this is the quest for the Holy Grail.......I'm determined find the answer!
Thank you in advance for any suggestions.
Caitlin Talbot

Potential solution for windows for a side-by-side install. This works for me.
To setup a firefox install side by side so that links from external programs (like email) can open (so you don't get a "Firefox is already running but is not responding" message) do the following.
The solution entails the use of the -no-remote switch. Don't use it for the default browser. Use it for the non default browser.
I'll use firefox 3.6 and firefox 4.0 as examples but this should work for future versions.
+ Install firefox 3.6 and Firefox 4.0 in different directories. Eg.
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Program Files\Mozilla Firefox 4\firefox.exe
+ Open profile manager. Start > Run : firefox.exe -ProfileManager
+ In profile manager create Two Profiles.
firefox3.6
firefox4
+ In profile manager select firefox 4 as your default (assuming you want to default to the latest) and tick "Don't ask at startup"
+ Create two windows shortcuts.
* General: Mozilla Firefox 4 (default). Shortcut > Target: "C:\Program Files\Mozilla Firefox 4\firefox.exe". Shortcut > Start In: "C:\Program Files\Mozilla Firefox 4"
* General: Mozilla Firefox 3.6. Shortcut > Target: "C:\Program Files\Mozilla Firefox\firefox.exe" -p firefox3.6 -no-remote. Shortcut > Start In: "C:\Program Files\Mozilla Firefox"
That's it. Links from external programs should now open in your default browser.
Further details see. [http://kb.mozillazine.org/Opening_a_new_instance_of_your_Mozilla_application_with_another_profile Opening a new instance of your Mozilla application with another profile]

T42p vista fn + f3 and fn + f4 functions (turn off screen and sleep) not working correctly

Hi -- I recently installed windows vista on my T42p. It works fine except that the fn+f3 and fn+f4 functions do not work as expected. Before installing the hotkeys driver, the fn+f4 function worked correctly while f3 did not (going to sleep worked, turning the monitor off did not). I then installed the recommended hotkeys driver. Now fn+f4 makes the monitor turn off while f3 does nothing ... fn+f4 is supposed to put the laptop to sleep. On top of this, if i select "sleep" from the start menu, the computer turns the monitor off instead of going to sleep.
Presumably, the sleep button could still be telling the computer to go to sleep, but the actual operation of going to sleep is now broken? Just a guess. Anyways -- anyone know how to resolve this so that fn+f3 turns my monitor off and fn+f4 puts my computer to sleep?

I've too this problem, but more, my sound mute wasn't worked (for deblock, but it can block it few second before...) 5 days in 5-6 instalation of three version of winxp: winxp ru x64 sp2, winxp es/ru sp3 x32.
eventually I've found and ran "TPOSDSVC.exe" in instalation directory and it give an opportunity deblocking the sound volume!!!!!!!!!!!! and I don't need more functions
volume levels and brightness adjustment worked well without OSD (before I ran TPOSDSVC.exe) and with OSD.
and now I don't know worked this bustered sound driver in winxp x64.
ThinkPad T61 7664

PSE 11 - MacOX 10.7.5 Printing Wide Format Printer and Profiles Not Working Correctly

Macosx 10.7.5
When I start up PSE11 and go to print I set up the paper size then select a Printer Profile. When print the image it is a mess and seem to be black and white it is as if I printed on the wrong side of the paper.
I then go and try to print it again.   Now it all works as it should beutiful colours and spot on. all other print following this works.
Then I shut down PSE11.   Start it up again. Guess what first print is a mess again.   all others after are fine.
I uninstalled PSE11, deleted prefs. and reinstalled PSE11.    Same thing..   first print a mess all others ok.
the issue can be replicated consistantly......
no problems with PSE10 or PSE9
any suggestions?????
cheers elo

Thank You for your suggestions.
I have been printing using PSE for over 14 years going back before the term PSE came up. I have done this professionally using profiles from others and those I generate myself..
All the things you mentioned have been done.
The main point missing in your suggestions is   It is only the first print every time I open up PSE11 that does not work...
at completion of print I immediately go back to the file command and say print and then bypass all settings and print again.   this time and every other print aafter are perfect...      I did not change one single setting...
I know about printer and adobe settings etc.     but thanks for going through the list it was a good reminder of how to remember everything sometimes we rush and forget something...
Finally    It works PSE6, PSE9, PSE10, CS5, Lightroom 4.   I think I have the settings right......
Any suggestions for how to get PSE11 to force the settings for the first print would be appreciated..
Only thing I have not done is upgrade to the latest version of the epson driver. Released less than a month ago to provide support for mountain lion.(iam only on lion) Maybe just maybe???   you never know.   Will try this when I finish by next batch of prints.
I will back up as I do weekly...    Still have the old driver from way back in release 10.5.8   will try to fire up to 10.5.8 and see what happens....
cheers elo
Message was edited by: Elo Laugesen

Time change for daylight savings and Alarms not working correctly

we have 3 iPhones in our house. 2 were set to auto time change for daylight saving and one wasn't. 1 did the auto time change with out an issue and all alarms worked ok. The other 2 have had issues with not been able to set the alarms ie set alarm for 0630 and it goes off at 0530 even though the time is set correctly. The 1 that was set to autotime worked fine until I switch auto time off, now the alarms on this one wont work either. well they work but just at the wrong time. The 3rd phone will allow alarms to be set, but the alarm will go off an hour earlier and this phone will not allow the alarm to be set for 0630 at all.
Has anyone had this issue and resolved it. It makes getting up for shift work a right pain..

Read here:
http://www.appleinsider.com/articles/10/10/11/applesays_ios_software_update_to_fix_pesky_alarm_clockbug.html

Keyboard and mouse not working correctly after installing Windows 8.1

I was forced to upgrade my computer to Windows 8.1. My keyboard worked fine until the sytem did a reboot. Numbers on keypad stopped typing and letters were being capitalized when the caps lock was off and the numbers across the top will only type the symbol above the numbers.
I looked up this problem and it seems I need to enter UEFI settings and disable Intel XHCI mode. When I get into the UEFI settings I cannot make any selection from the startup menu. Both my keyboard and mouse stop working.
Any suggestions?
This question was solved.
View Solution.

Thank you for posting a response. Fortunately, I didn't have to try your solution because the computer resolved itself.

Clientless VPN and Java not working correctly

In a recent discovery we found that the newest version of java will not work with our Cisco SSLVPN setup
We are using an ASA5510 with 8.0.4 IOS version and 6.1.3 ADSM version and most users use an mstsc.exe smart tunnel to rdp into our terminal server farm.
Our laptops are being imaged with Java 6 update 3 (this works fine) then upgraded to Java 6 update 11, after which the smart tunnel appears to launch but a connection cannot be established. Reinstalling the older version of Java resolves the problem.
I was wondering if anyone else has encountered a similar problem and found a workaround. Currently, company equipment is not being upgraded to the latest version of Java but personal equipment is a different story.

To get the old downloader back follow the directions below.
# In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
# Click '''I'll be careful, I promise!''', to continue to the about:config page.
# Filter '''browser.download.useToolkitIT'''.
# Double click and '''make sure it says true.'''
# You now have the classic downloader back! Yay!
Any issues or confused?
* http://kb.mozillazine.org/About:config

JSP Custom tag not working correctly for multiple users

I am doing some support work for an existing web system. When doing single user access (a custom tag is called within the JSP); the output of the Custom tag is fine. However, during multiple user access to the JSP, as I could see on the log files, 2 users access the custom tag at exactly the same time- the output of one of the users was incorrect. The custom tag btw, uses TreeMap, Stringbuffer and does not have a body, only attributes passed to it. It takes an input file and a Hashmap as input attributes and it sets a string in the page context which is later being used in the JSP. No error is logged, its just that the string produced(placed in the page context) is incorrect. This only happens when this tag is called at same time(when multiple users accessing the page) Has anyone encountered this problem? Is there a known pooling/thread problem with custom tags?

in a servlet/jsp (a jsp is compiled into a servlet),
the class atrributes are shared. only the
variables declared in the doservice (doGet or doPost)
method are threadsafe.
post your jsp plzhere's the snippet of the jsp code:
<%@ page language="java"
errorPage="Error.jsp"
autoFlush="false"
buffer="128kb"
import="java.text.*,
java.math.BigDecimal,
java.rmi.RemoteException,
java.util.*,
java.io.*,
%>
<%@ include file="Secure.jsp" %>
// a set of request.getParameter are being called here
HashMap myMap = new HashMap();
myMap.put(xmlDPhoneNumber, dPhoneNumber);
myMap.put(xmlDPhoneType, "D");
myMap.put(xmlDPhoneExt, dExtension);
myMap.put(xmlDPhoneDigits, dPhoneDigits);
// other myMap putting of key values are called here
%>
<test:applyCustomerSearchValues id="resultXml" xmlTemplate="/xml/message/CustomerUpdateRequest.xml"
xmlMap="<%= myMap %>" />
<test:transformXMLString id="customerUpdateRequest"
xmlString="<%= resultXml.toString() %>"
xslFileName="/xsl/message/CustomerCreateRequest.xsl"
paramMap="<%= PMap %>"/>
now here's the thing: the xml produced by test:applyCustomerSearchValues is resultXml which is used in test:transformXMLString. I got no problem with the output of test:transformXMLString. I am sure that a phone number is being passed into the former as part of the HashMap key-value. However when test:applyCustomerSearchValues is called when 2 users access the jsp, it seems like the the first xml produced does not have the phone number in it - but the other has it. The xml is OK for both users, its just that the values of the HashMap do not seem to be passed correctly into the xml produced.
--- here's the snippet of the log, the first httpWorkerThread-80-6 does not have the phone number, however the second one-httpWorkerThread-80-7 has the phone number. The first one should also have a phone number as in the start of the log, the number was listed, but as the system called the test:applyCustomerSearchValues tag, the number was not included. There are different phone numbers for the 2 users. The odd thing here is, the userID which is the 'LastUpdatedBy' element has been set correctly. The userID is being fetched from a session attribute while the phone number is fetched from a request parameter, both are being placed in the HashMap attribute passed to the custom tag.
2007-06-05 10:55:41,954 DEBUG [httpWorkerThread-80-6] (?:?) - ApplyCustomerSearchValuesTag : String produced is :<Values><Customer>
<Status>
     <CustomerType></CustomerType>
     <FirstContactDate>2007-06-05</FirstContactDate>
     <StatusFlags>
          <Fraud>N</Fraud>
          <BadCheck>N</BadCheck>
          <BadCredit>N</BadCredit>
          <DoNotMerge>N</DoNotMerge>
          <ARHoldRefundCheck>N</ARHoldRefundCheck>
     </StatusFlags>
     <LastUpdatedDateTime>2007-06-05 10:55:41</LastUpdatedDateTime>
     <LastUpdatedBy>5555</LastUpdatedBy>
     <OPAlertClass></OPAlertClass>
     <MailListStoreID></MailListStoreID>
     <OriginatingSource>CSA</OriginatingSource>
</Status>
<DPhone id="D">
     <DPhoneNumber></DPhoneNumber>
     <DPhoneDigits></DPhoneDigits>
     <DPhoneType></DPhoneType>
     <DExtension></DExtension>
     <DAreaCode></DAreaCode>
     <DPhoneCountryCode></DPhoneCountryCode>
</DPhone>
</Customer>
</Values>
2007-06-05 10:55:41,954 DEBUG [httpWorkerThread-80-7] (?:?) - ApplyCustomerSearchValuesTag : String produced is :<Values><Customer>
<Status>
     <CustomerType>N</CustomerType>
     <FirstContactDate>2007-06-05</FirstContactDate>
     <StatusFlags>
          <Fraud>N</Fraud>
          <BadCheck>N</BadCheck>
          <BadCredit>N</BadCredit>
          <DoNotMerge>N</DoNotMerge>
          <ARHoldRefundCheck>N</ARHoldRefundCheck>
     </StatusFlags>
     <LastUpdatedDateTime>2007-06-05 10:55:41</LastUpdatedDateTime>
     <LastUpdatedBy>1840</LastUpdatedBy>
     <OPAlertClass></OPAlertClass>
     <MailListStoreID></MailListStoreID>
     <OriginatingSource>CSA</OriginatingSource>
</Status>
<DPhone id="D">
     <DPhoneNumber>(123) 123-4788</DPhoneNumber>
     <DPhoneDigits>1231234788</DPhoneDigits>
     <DPhoneType>D</DPhoneType>
     <DExtension></DExtension>
     <DAreaCode>123</DAreaCode>
     <DPhoneCountryCode>US</DPhoneCountryCode>
</DPhone>
</Customer>
</Values>
Message was edited by:
Mutya

'Get Variant' button not working correctly for report

Hi,
I have created an internet service for a custom report. For some reason, when I click the 'Get Variant' button I get a popup, but it does not have any entries to choose from. It is blank. In SE80, the button works correctly. Any ideas?

I figured it out myself. I didn't have the parameter ~webgui set.

Pre-approved Overtime (IT2007) Not Working Correctly for Night Shift WSR

Hi All,
I have come across this issue in pre-approved overtime (IT2007) for night shift WSR.
The planned working time for an employee on 04-Jan-14 is from 22:30, 04-Jan-14 to 06:30, 05-Jan-14.
The employee clocks in at 22:30 on 04-Jan-14 and continues work till 10:30 on 05-Jan-14. Hence, he has worked 4 hours of overtime from 6:30 am - 10:30 am on 05-Jan-14 for the night shift of 04-Jan-14.
A pre-approved overtime quota was created in IT2007 for 05-Jan-14 from 06:30 am to 10:30 am.
However, the overtime doesn't get calculated because in IT2007, there is no previous day indicator to assign 06:30 am - 10:30 am on 05-Jan-14 to the night shift of 04-Jan-14.
The time pair in TIP table of 04-Jan-14 will have overtime timings from 30.5000 to 34.5000.
The overtime approval will be for 05-Jan-14 from 6.5000 to 10.5000. Hence, there won't be any overtime wage types generated.
If there was previous day indicator in IT2007, then the pre-approval timings will be from 30.5000 to 34.5000. This will ensure the pre-approved overtime timings will match with the overtime worked and will generate overtime.
Please refer the below screenshot for reference.
It seems that this issue was reported last year too in SCN. Below is the link for the same:
http://scn.sap.com/thread/3343292
I have raised this issue with SAP and waiting for their response. So far, it hasn't been satisfactory.
Does anyone have any solution to this?
Thanks and regards,
Vivek Barnwal

Hi Johannes,
SAP actually provides a standard functionality for this requirement. Actually, it was stupid of me not to do enough research and come to the conclusion that this is not possible in standard SAP.
For pre-approved overtime for night shift where timings are considered, please write as below:
GOT TO20 01 TEX
TEX will ensure that the approval for next date gets considered for current day.
I hope this resolves your query.
Thank and regards,
Vivek Barnwal

ATP FUNCTIONALITY NOT WORKING CORRECTLY FOR ATO Model

Guru's,
Currently I am facing issue in ATP Inquiry to arrive at schedule ship date, we have set up an ATO Model and its low-level parts for multi level ATP, including ATP rules, item attributes, bom attributes, and lead times and ATP check is based on planned output and enabled 24X7 plan.
When try to perform ATP inquiry either from ASCP/OM responsibility, Instead of showing complete drill down of material constraint at the part level, it "stops" at the model level and shows no availability until the inifinte supply timefence, then unlimited availability after that.
I was earlier able to view the complete ATP pegging details with ATP dates well within ITF, but however when we re run the plan to include additional SO the above behavior is observed.
Can some one help me to reslove the issue, as I am not sure what exactly which is triggering this behavior.
Thanks,

Thanks for the reply, but this note was not addressing the above stated issue. In this note for matched configuration, they are not able to view pegging else they are able to perform multilevel atp check.
Can anyone help me to reslove this issue.
Thanks
Edited by: user604737 on Jun 18, 2011 4:48 AM
Edited by: user604737 on Jun 19, 2011 11:50 PM

HFR Range from and to - Not working correctly for hierarchies?

Similar Messages

Maybe you are looking for