HH3 Broadband blue light not working with Power Sa...

Had a BT engineer here today to do a line check and DLM reset when he noticed the blue lights were out, so I told him they were disabled in the powersave mode via the HH Manager at that time.It wasn't till he'd gone I realised he meant the Broadband light was out, which I simply hadn't noticed.This got me wondering if my fairly recent speed problems could be related with drop offs and such, but the engineer didn't persue the blue light issue earlier. 
I rang BT to enquire about a replacement HH3, and was quoted £10 with £6 postage, because the warranty had run out on the hub, as well as me being out of contract.
It sounds about right but can anyone here confirm please?

Also - I need to add that the printer is sitting about an inch away from the Mac. 

Similar Messages

  • Compaq Presario F767NR caps lock,scroll,touch pad blue light not working

    Hi,
    I have a Compaq Presario F767NR. It downgrade it to xp. All my drivers are ok. But caps lock,scroll,touch pad blue light not working though its function is ok.
    I think led is ok. I find that for the scroll lock when i press fn+num lk then the blue light works fine.

    I have the same problem and I think it started when I downloaded the SP2 for the Windows Vista. So probably it is not a problem of the laptop. I have an HP Pavilion dv9500 notebook PC.
    Message Edited by Yannis1980 on 10-13-2009 12:09 PM
    Message Edited by Yannis1980 on 10-13-2009 12:09 PM

  • Blue tooth not working with u connect using lastest update

    Any help ? I have a 3GS and its lastest with software. Blue tooth was working fine unlit update. No solutions with crysler as of yet for this problem.

    software is 6.1.3

  • Java 7 not working with Power Teacher grade book

    I have the same issue as Tweeks21 and don't have the luxury, I suppose, of a spare pc on hand.  I can do my attendance on Power Teacher but cannot get into my grade book.  At this point, I've resorted back to my paper grade book and wait to use the school's pc. I am a bit frustrated and annoyed at the prospects.  When will this be fixed.  How long will it take to be fixed. Wish Java, Mac, or Power School/Power Teacher had anticipated problem so it wouldn't be a challenge now.  I am a bit anxious for a now solution. help!!

    Basic problem when jumping the shark and not retaining a bootable backup/clone of your previously good installation. Sorry, but don't have a solution for you. All I can suggest is to File a bug report with Apple. Complaining here is fruitless.

  • Why does my blue tooth not work with os10.8.3 upgrade?

    After upgrading from OS 10.8.2 to 10.8.3 I can not get bluetooth to pair with other devices.  Is there a patch or something I can install?

    Hello:
    Try resetting the SMC (there is no "patch").
    Barry

  • Blue tooth  not working with honda cr-v multimedia

    Meu iphone 4 não é compativel com a central multimedia do Honda CR-V. Existe alguma atualização para corrigir o problema?
    Testei com um smart phone motorola e funciona perfeitamente.
    Se alguem souber a solução me ajude por favor.
    Grato

    software is 6.1.3

  • Huawei e180 not working with Lion!!... working fine on Windows PC's but not on new macbook pro. new user to apple

    Any suggestions on why mobile broadband dongle will not work with 10.7. Mac see dongle, opens folder, but returns error message when try to launch.. NEW USER TO MAC

    This thread is a couple of years old but it may answer your question?
    https://discussions.apple.com/message/8978867#8978867

  • Macbook Pro 2011 DVI HDMI out does not work with TV when the power cable is connected

    My Macbook Pro (Early 2011) DVI HDMI out does not work with TV when the power cable is connected. If get the blue screen and then can use the macbook but nothing is displayed on the TV. If i go into display I can see that there are two screens but nothing displayed on the TV. If i take the power cable out at this point the TV shows the second desktop as expected. If i then reconnect the cable, the screen flickers, as though it is being affected by the power cable, and the screen goes blank on the TV. Only if i remove the DVI cable do i get the blue screen again. If i remove the power cable and reconnect it will do it every single time, so i cannot see it being a TV issue or a minor glitch.
    I have had this working previously but at the minute it seems to not be playing ball....any thoughts
    Thanks
    Dan

    BUMP
    Any ideas?

  • HT202157 My apple TV is not working with light flashing after up date

    My apple TV is not working with the light flashing after an up date, what can be done?

    same here macbok air 2012 appletv 3 bugs the **** out of me
    it just stops randomly after a "while"

  • My mac's keyboard is not working with my mac.the green light blinks and i cannot get onto my mac. everything on the support questions does not help because i cant go on the mac and i cant sign in

    my mac's keyboard is not working with my mac.the green light blinks and i cannot get onto my mac. everything on the support questions does not help because i cant go on the mac and i cant sign in

    If you can't sign in, then you can't troubleshoot and/or pair the keyboard until after that........ so, for that, you will need to borrow someone's USB wired keyboard in order to get signed in and to the Keyboard Bluetooth Preferences.

  • Power button not working with 7.1 update

    Power button not working with 7.1 update

    I take it your phone was still under warranty then?!
    Unfortunately I was not so lucky, and my experience was rather poor service-wise. They're called Apple Geniuses but I beg to differ...
    I'm not sure where in the world you are located, but my "experience" involved visiting the Leeds store and confusing everyone with this issue. I can tell you, just by the looks on their faces, they had never been faced with this problem before!
    I suggested my phone was rolled back to the version it was previously to establish whether this was the underlying issue. I was asked whether my phone had been backed up and as it had the "genius" proceeded to restore the phone "as it came out of the factory" to quote him.
    When this was completed the phone was still doing the same thing and I was advised "the software update must have highlighted a hardware issue." I was told it would have to be physically repaired and was told to have this done by a third party as Apple would charge approximately £160. Incidentally, I work in IT and repair PC's, laptops and mobile devices for a living and made a point of raising that a sleep/wake button ribbon cable for an iPhone 4S can be bought on eBay for as little as £3.00...if indeed it does need replacing, which I suspect it does not.
    Anyway, so now I was left with a phone for the rest of the day which was blank and still the problem remained. On the train, on the way home, you can then imagine my disbelief when I actually took the time to look at my phone's configuration and realised that iOS version 7.1 was still installed, so obviously the issue would still remain. So the visit to the "genius bar" was a complete waste of time as I'm still in the very same position, and I still blame the 7.1 update for this...let's home 7.2 is released very shortly and this solves the issue...
    I have downloaded the package to roll the version back to 7.0 but I'm a little reluctant to carry this out yet as I would expect Apple to so the issue they have caused. This is NOT hardware related but software.
    I seriously think Android is calling me...

  • HP ProBook 5220m Fan not working with battery power but work fine with adapter plugged in

    Hi,
    Any one have this issue?
    HP ProBook 5220m (Bios Version F50) Fan not working with battery power but work fine with adapter plugged in.
    This issue was found in my replacement motherboard. the original mother do not have this issue.
    The origianl mother to be replace is due to can't power on after a power failure recovery. I believe was due to power surge killed the motherboard's power controller circuitry.
    Appreciate any one can provide clue for resolving the problem.
    I have tried to install speedfan to try my luck, but it can't any fan in the application to configure. (Bios Version F50) 

    @wheng 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • My Time Capsule does not work with existing WiFi

    Following a question solved on March 24 by LaPastenague, but gone bad again.
    Apple AirPort Time Capsule
    I felt the need for a physical backup of my data, as I would not completely trust the different clouds. I use, and have used Dropbox for 4-5 years and are very satisfied with that, but I am still not sure if or when a political lunatic will shut off the internet.
    I purchased the Apple AP Time Capsule 2T, because all my other stuff are Apple, and that it's wireless. My old backup is Maxtor 300 GB.
    Since we stay 2-3 weeks on two locations, one in Norway and one in Sweden (two different countries) we must use Mobile Broadband 4G, cables or fibre connections are useless for us, and we don't have it up to the houses. I have one mini router for each country, we bring with us iPhones, iPads, iMac, Apple TV, APExpress. When we pass the boarder I change the mini router, and the system continues working perfect on the WiFi, except the APExpress that needs to be reconfigured,  but then it works.
    The APTC was difficult to make working as it would not accept to be in an existing network, but with good help from the Apple Community, LaPastenague, with forcing the TC connect to the APE with Ethernet cable in bridge mode, ref "My Time Capsule does not work with existing WiFi" from March 24, the problem was solved and all gadgets worked together in a perfect harmony, until we changed location.
    Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
    I have a slight feeling that the two WiFi bands are making the trouble as during the configuration of the TC sometime the last figure 6 and 7 pops up, and that has something two do with the two different 2,4 and 5 GHZ bands
    So, I am curious if you have any idea ?
    I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?

    I can deal with the last question first and easily.
    I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?
    Open the airport utility .. go to the disk tab and select erase.
    When you select erase you will get mulitiple options.
    Quick removes the file table but does not delete the files,, it takes 2min or less.
    A Zero out data is the secure way,, by writing 0 ie low level drive format.
    It can take several hours..
    7 pass will take a week.. not recommended..
    35 pass erase is ridiculous.. it would take a month.. put an ax through the TC. It is quick and better.
    Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
    The fact that it did work and has now failed might point to faulty unit.
    The only way to tell is reset it properly to factory and start over.
    Universal Factory Reset.. any model TC or AE.
    Unplug your TC/AE from power or turn off at the power point.
    Hold in reset. and power the TC/AE back on..  all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
    Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
    Note..
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
    No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    Generally having multiple wireless AP should not cause problems.. but it is better to set channels manually.. so it doesn't go beserk rotating channels.
    Remember to keep all names short, no spaces and pure alphanumeric.
    Sadly though the Apple routers have no logging now and no SNMP and almost nothing to help diagnose a problem, so if it continues .. take it back to apple.. they have given you no other method of fixing it.

  • Comcast Cable Internet not working with router (WRT54G), but network is fine?

    My Comcast Cable Internet is not working with my router (WRT54G), but my home network is fine. The internet works without router.
    I have a WRT54G Wireless-G Broadband Router from Linksys.
    I was using Bellsouth DSL Internet up until two weeks ago.
    I had my DSL modem connected to my router, and the router let me use the internet and share some files and printers with my laptop upstairs.
    A few weeks ago we changed to Comcast cable. The technician came in and connected it himself, but only for the desktop. The internet worked perfectly, and still works perfectly on my desktop (the one downstairs). He didn't really give me any instruction or CD-roms for it.
    When I tried connecting my router, the internet stopped working. It was weird because the router worked for the file sharing and printer sharing between both my computers, but the internet didn't work. Although, the light for the internet is lit on the router itself.
    I even have this program called "AOL Network Magic" which shows a map of what is connected to the router, and it shows that the router and my laptop and desktop are connected, but then it has an "X" for the internet connection.
    I have tried everything. I lost all of my CDs and things that came with Linksys, but I downloaded some guides from the Linksys website and it doesn't really help. I tried something called "NetSet", but after I set everything up it says my router is not compatible or something with NetSet. I read a bunch of FAQs, I tried going to comcast and seeing if they had any FAQS about it, but I can't find anything.
    Maybe one of you can help me?
    Also, I don't know my modem's IP address. I had it for Bellsouth, and sometimes when I would lose my connection I would go there and click on "reconnect" or something like that.
    So the only way I can use the internet is to disconnect everything from my router and connect the ethernet cable directly to the modem.

    You may open the web setup utility page of the router by typing its IP address on your browser's address bar. By default, it is 192.168.1.1.  When you're asked for username, you may leave it blank.  For password, its "admin". If in case that does not work, reset your router at the back for 30 secs and do a power cycle again, see if it becomes accessible after that...
    "The war between heaven and hell depends on the choices we make, and those choices require sacrifice. That's the test"

  • MBP CD2 DVI to VGA not working with projector

    I am having issues getting the MBP to recognize a DELL 2300 projector through a DVI to VGA apple cable.
    A few months ago there were posts about this, but no solutions. The problem seems to be with the 'INTEL' side of things, as the same projector with the same DVI to VGA apple cable works on an older G4 tower running 10.4.9. The projector also works on an old G4 iBook with it's version of a VGA adapter. To make things more confusing, a DVI to Video apple cable works with the DELL 2300 on my new MBP C2D-but produces a terrible quality picture. Mysteriously, my previous 1st generation MBP CD worked with the DELL 2300 via a DVI to VGA apple cable (but I'm not sure which OS was out at the time 10.4.8?)
    My new MBP CD2 definately recognizes the projector through the DVI to VGA adapter, but the projector doesn't recognize the video signal from the computer. It is DEFINATELY the MBP (or universal drivers), as I have checked the DVI to VGA dongle (works), have checked the projector (works with an ibook running 10.4.8 OSX with VGA dongle), have changed resolution settings before and after connecting, have restarted computer, have tested various orders of connecting the projector and cables. STINK! (I also have TWO DVI to VGA adapters, so it is not a bad adapter). I have also played with exchanging various plist files from older universal versions of 10.4.8 that worked with the projector-no help.
    As I stated, the projector will work (in horrible quality) with a DVI to Video dongle. Why it will not work with the DVI to VGA dongle is a mystery and annoying I would hope that a newer MBP CD2 would be plug and play (like my previous MBP CD and an old G4 tower and an old iBook G4...but no).
    Any ideas, any help, any answers?

    Here are the actors in our play today
    1. MacBookPro A. (my system a CD2 2.16 with OSX 10.4.9)
    2. MacBookPro B. (my friends system a CD2 2.16 with OSX 10.4.9)
    3. an iBook (my friends 1.07 GHz G4 with 10.4.8 and a VGA adapter)
    4. DELL 2300 MP projector
    Plugged in DVI to VGA adapter to the virgin MacBookPro B (never had the projector plugged into it before) Dell projector shows that it recognizes an analog RGB 800X600 signal from MBP B. It projects a beautiful desktop. All is well for a moment.
    In Display preferences we see for the MBP B
    Color LCD, Display: 800X600 stretched, Colors: Millions, Refresh Rate: N/A
    VGA Display
    Now, I unplug the DVI to VGA adapter and naturally MBP B readjusts to it's native resolution. Great.
    Now I immediately plug back in the DVI to VGA adapter. The computer and the projector searches for signal with none found, while the computer shows no attempt at an automatic readjustment as above (800X600 stretched).
    I try the 'detect display' option. It causes computer to stall for a second (as it searches) but it does not detect projector and does not readjust it's own resolution to 800X600 stretched as it did initially. F7 key does nothing.
    This is a problem!
    So, I shut down the projector. I unplug the projector's power source and waited 20 seconds. plugged it back in, started projector back up.
    I shut down/restarted the MBP B.
    I plug back in the DVI to VGA adapter into the MBP B. The MBP B screen flashes to all blue, but does not automatically change to 800X600 stretched (remains at native resolution and does not recognize an external monitor/projector)
    Enter the iBook!
    I plug the iBook's VGA adapter into the projector. The projector shows that it recognizes an analog RGB 1024X768 60Hz signal and projects desktop screen immediately. Plug and play!
    iBook display prefs reveal:
    Color LCD, 1024X768, colors: Millions, Refresh rate: N/A
    Color tab: Generic RGB Profile
    VGA display, 1024X768, colors: Millions,
    Now. I unplug adapter from iBook, iBook readjusts to native display
    plugged back in adapter to iBook, immediately recognizes and displays projected desktop.
    Scene 2: The FREAKY thing!
    Now, I immediately (after unplugging the adapter from the iBook) change adapters to the DVI to VGA adapter and plug the projector into the MacBookPro B, whallla! Back in business. (computer screen adjusted to 800X600, and projector recognized signal).
    Now, what about my computer? I unplug from MBP B and plug into MacBookPro A, and NOTHING...the computer doesn't automatically adjust to a new resolution, and the projector doesn't recognize any signal from the computer.
    Ahhhh Freak out! Now, I plugged adapter back into MacBookPro B, and now back to NOTHING. MBP B no longer recognizes projector or readjusts it's resolution. Was something somehow corrupted?
    Now, I plugged iBook VGA adapter back in, and iBook once again with it's awesome G4 technology (or dated video drivers or something) recognizes the projector in an instant and projects the screen.
    Now, logically I try again to immediately unplug the adapter from the iBook and switch adapters and plug back into MacBookPro B-it worked once right? But, sorry, NOT twice. The mystery deepens.
    Well, I think, maybe it is because I didn't restart MacBookPro B before attempting the switcharoo from iBook to MacBookPro.
    So, I plug back into iBook-projector. And the iBook works immediately again.
    I restart MacBookPro B and plug in to the freshly restarted MBP B...HOUSTON WE HAVE LIFT OFF! The MacBookPro B recognizes the projector and the projector kindly displays the desktop.
    Now what about MacBookPro A...Last time, when I did the switcharoo, it corrupted something to cause the MBP B not to work. Let's try it again. Will this plug-unplug-restart-switch adapters-immediatly plug in technique work...let's see. I restart MBP A, and plug DVI to VGA adapter in. Sorry. Same ol' no signals recognized. MacBookPro A not auto readjusting resolution, and does not list any projector in display prefs.
    Let's get crazy and immediately plug the adapter into the MacBookPro B...it works-oh so logical...NOT! Why wasn't it corrupted this time by MBP A? MacBookPro B readjusts its screen to 800X600 stretched and projector immediately recognizes and projects desktop.
    Now lets see if I can break it again as before. I unplug it from MacBookPro B and back into MacBook Pro B, knowing that this caused it to stop working previously. And...it still works-WHAT? I do it a third time. It still works on MacBookPro B.
    So,
    I plug it back into MacBookPro A...still nothing. Back to MacbookPro B works like a charm. This time it struggles a bit showing that initially it sees a signal from MacBookPro B of 1192X900 (i Think), then the MacBookPro B switches automatically to 800X600 and the projector works.
    Wait..I see something amiss! I see in my MBP A menu bar an icon for Labtick which MBP B does not have. I shut down Labtick, plug back in the DVI to VGA adapter and 'Boom' the projector is recognized.
    I unplug DVI to VGA adapter and plug back in to MBP A and 'Boom' the projector is recognized again...no it couldn't be!
    Well, it is possible it couldn't be because, I shut down the projector, unplug it's power source, plug it back in. I plug it back into the recently working MBP A with Labtick not running, and sorry folks, now the projector doesn't work again. The MBP A does not readjust it's resolution, nor recognize a projector and the projector doesn't recognize the MBP A.
    Let's try the projector in MBP B....same deal. Now it doesn't work. Same symptoms of MBP A.
    Back to the good ol' iBook. Of course it works.
    Now switching over directly to a restarted MBP B. -DOESN'T WORK (as it did using this technique previously)
    Now switching over to MBP A- DOESN'T WORK.
    As you can see, it is hard even with multiple computers to find a series of doing things that consistently makes the projector work.
    Any thoughts, ideas, ways to diagnose? Thanks!

Maybe you are looking for