HH3 clock keeps resetting...

My Home Hub 3's clock keeps resetting back to jan 2003. I have to keep hanging it manually to the right time.
Does this mean the hub is resetting itself?

HH3 is a pretty manky piece of kit (to quote BT advert...our best home hub yet).
Mine managed a total reset in the 1st day...lost ALL my programming, passwords addresses etc.
The clock is permanently an hour slow if you let it get it's time from ANY time server, and if you set it manually any reset or power glitch puts the clock back to 1st Jan 2003.
And why oh why make a router with 3 100Mb ports and 1 GigE port, couldn't they (BT) have stretched the budget a bit and make it all GigE ports.
As for the wifi, it's supposed to select the clearest channel, mine insists on sticking with the same channels as my neighbours.
I'm dreading what will happen tomorrow when OR engineer comes to enable Infinity2, what will he managed to screwup?

Similar Messages

DMC 350 bad wireless?? clock keeps resetting? etc. ect.

When placing the DMC 350 I had to replace my routers with a couple of WRT320N, because the DMC350 placed 5 meters from the older router just wouldn't stay online.
This doenst HELP..!!! it's online 5 meters from the living room to the kitchen and it just doenst stay online.!!! drops music. Sound sometimes gets louder.!! (there is no door to the kitchen)
The clock keeps resetting. after setting it to update trough inet. It sets back after a shutdown to firmware default.
Right now I'm playing a live stream (radio) to a DMP100 and the DMC350 and the DMC350 drops sounds regulary.! The DMP100 has a cable attacht to it ..

Okay... bin there, done that
Let me tell you what I have and who I am. Because otherwise the options you'll provide of finding a solution to my problem mabye be to something I already have tried.
First of al al frimware from all the hardware is up to date.
2 x WRT320N
DMC350
DMC250
DMP100
DMRW1000
NMH405
3 storage building
The first WRT320N WAN connected cable modem LAN connected HP Procurve 2824 24 10/100/1000 switch (3th storage)
The second WRT320N LAN connected HP Procurve 2824 24 10/100/1000 switch (livingroom) (WAN NOT CONNECTED)
The DMC 350 is connect trough WLAN about 5 meters placed from the second WRT320N free line of site
The DMC 250 is connected trough fully tested pacth cable CAT 5e Lan site HP Procurve 2824 24 10/100/1000 switch
the DMP 100 is connected trough fully tested pacth cable CAT 5e Lan site second WRT320N
The DMRW1000 is connect trough WLAN with the second WRT320N
The NMH405 is connected trough fully tested patch cable CAT 5e Lan site HP Procurve 2824 24 10/100/1000 switch
The second WRT320N is WLAN enabled 5 GHz 20Mhz ONLY..!! the first WRT320N is WLAN disabeld.
No wories about the laptops that are N network enable.
I normaly place Cisco Unified Comunications hardware with div. AP.
I'm a Microsoft Certified Partner.
so please come with some problem solving options I might not have thought of.

Touch clock keeps reseting

My partners iPod Touch has a nasty habit of resetting the clock at random.
It is solved when synced back to iTunes but it's annoying that it keeps loosing the settings when in use.
Is this a unit fault and what can be done to stop it happening?

I've been having the same problem where the clock resets randomly (different hour, minute, day, month. July seems to be a favorite wrong month.)
The clock will reset immediately when it is connected to the PC, but not always to the correct time. Sometimes I need to disconnect/connect it a couple of times to get it synced back to the correct time.

E63 Clock keeps resetting

Hi
I currently own a Nokia E63. It had been flat for a few days. After charging, I noticed that the date and time were a few days out so I re-set them to the correct date and time. The next day, I noticed that the time had set itself back to yesterday's date at 10:00 am. It now keeps on doing this every hour, no matter what date and time I set it to.
Any help?
Thanks

it seems there's something wrong with your battery. did you try to use another one?
If you want to thank someone, just click on the blue star at the bottom of their post

Computer Clock keeps getting reset

My computer clock keeps resetting itself. I have replaced the PRAM battery with a brand new one and I still am receiving this error message. What else could be going on?

The card was already installed, working fine. To troubleshoot another issue (I cannot export video from my Canopus ADVC300), I removed all PCI cards. All 4 slots are used. After I removed the 4 PCI cards, my Mac started losing time. I then replaced the PRAM battery and reset the PRAM. This didn't solve the issue. When I put the other 3 PCI cards back in, nothing happened as well. When I put the Sonnet Tempo SATA back in, the computer started retaining the time. Unfortunately, I the computer is not retaining the time anymore- even with all 4 PCI cards installed. How do you reset the MOBO?

MSI 870A Fuzion.... BIOS keeps resetting it self after restart,

HI NOOB here
I've just brought my first ever parts for my first ever computer build.....fitted everything perfectly and booted....
1st: logo screen came on
then another screen came saying low battery, thunxsomething...IDE, bios clock unset...."hard drive not detected"
3rd: screen came up asking either f1 to go into bios f2 to load defualts
i pressed f2 little dash flashes in the top corner
rstarted with second {the same procedure as explained }try ubuntu live usb loads......
after shutdown and installation of OS
i attempt to troublkeshoot the issue of bios time, IDE, and no hard drive detected
by going into the bios... which was totally from whats expected i.e. in colomns instead rows
i was expecting bios style shown below however after thought i got adjusted to the new rows one
http://www.tomshardware.com/reviews/x48-motherboard-comparison,1781-5.html
loaded optimal settings, changed bios clock and date, adjusted boot preority
saved AND EXITED
BUT foud that my MSI 870A Fuzion.... BIOS' keeps resetting it self to factory defualt... ,
AND>>>>>>>>>>>>>>>>>>>>>>>>>
also found that it didn't go directly into the NEwly installed OS.....
HELPHELPHELPHELPHELPHELPHELPHELPHELPHELPHELPHELP
I'm its quit anoying knowing that this is my first ever computer build

Quote from: npm1 on 18-November-10, 22:29:03
it restarts as expected but it doesn't save it........and it continues saying no hard disk detected low battery even though its connected to psu and say IDE....even though i have sata connectors......
just as an extra, a small splat of water went on the board i simply wiped it away........(happened before first boot) would this by any chance affect the bios
Quote
it restarts as expected but it doesn't save it........and it continues saying no hard disk detected low battery even though its connected to psu and say IDE....even though i have sata connectors......
what message exactly you are getting at bios post screen?

My ipod 120GB keeps resetting while playing, any hints?

my ipod 120GB keeps resetting while playing, any hints?

The problem is the "screen saver". Normally after some time the backlight of your ipod is switched off automatically and a clock appears. This doesn't work properly and leads to resets.
The solution: You have to go in the main menu to "settings/backlight and activate "Always on". After that your ipod should work properly. To avoid a very low battery runtime now, you have to adjust the brighness settings to a low value.
This also solves problems like radomly skipping songs or stopping playback.
I really would like apple to solve this problem, but i doubt this will ever happen.

Phone Keeps Resetting

My phone keeps resetting itself. It goes from time clock to status bar back to time clock. I've done a soft rest and hard reset. Any other ideas?

Hiya!
Do you mind clarifying that a little more please?
Is the phone powering itself off or is it stuck in a loading loop?
1). Please thank those who help you by clicking the beside the 'Reply' button.
2). If your issue has been solved, please resolve it by marking "Accept as Solution" on the correct post!
3). Remember to have fun! We are all in this together!
4). Follow me on

My Clock Keeps Setting Time Wrong

Hi there,
I have a 15" MacBook Pro from Dec 2011 which has a bit of a problem. Recently (within the last couple of months), the clock keeps setting itself ahead 3 hours. I have no idea why. I even unchecked it setting from the clock at apple, and took my city out. But almost every time that I log in, it sets itself ahead three hours, and sometimes a whole day and three hours forward.
I reset the SMC, as well as the PRAM. It still does it most of the time (sometimes it does get it right).
I have no idea what to do anymore. I've looked online and couldn't find any other recommendations, so I'm wondering if anyone else had some ideas.
Running Mavericks btw.
Thanks for any help or info.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Nano keeps reseting

my 1 week old nano keeps reseting every time i turn it off. i'm listening to music, then i turn it off, when i turn it on again the apple logo shows, neither my songs and photos are lost, but the clock is reseted, my screen lock code is reseted, in fact all my settings are being reseted every time i turn it off and on. this isn't a problem involving the hold switch because i never forgot to switch it on. i have restore the factory setting with iPod software updater in my mac but the problem remains the same.
Is there anybody who has the same problem???
Can somebody help find a way out???

If its been sitting for awhile, its showing the apple logo because it's waking up from Deep Sleep mode. Deep Sleep kicks in when you let your iPod sit for about 36 hours. If it is only when you let in sit for long periods of time, don't worry about it, it's normal. It had nothing to do with your cousins.

Iphone now it says it needs to be activated and plugged into itunes. It wont let me do anything because it keeps resetting. Help please.

I cant coonect it to the computer because the iphone keeps resetting itself and the restore or activation cannot be completed. Do I just need to get a new iphone? I have a 3gs and dont want to get a new iphone. Also the iphones sim card wont work and I have tried to do a hard reset mutiple times.

Sounds like your phone was jailbroken. If it was, you will need to get another phone. That phone is permanently disabled.

User Settings keep resetting

I have an I-Mac. I keep using the get Info to set my preferance for opening photos and other items. I find that the computer keeps resetting them to the default settings. For example I want my .jpeg files to open with Adobe Photoshop but they keep resetting to preview. I want certain items to open in Firefox but it keeps resetting to Safari. What am I doing wrong?

Welcome to Apple Discussions.
You are doing nothing wrong. It sounds like LaunchServices is confused.
Launch /Utilities/Terminal and copy & paste this at the command line to rebuild LaunchServices:
Code:
<pre class="alt2" style="margin:0px; padding:3px; border:1px inset; width:640px; height:34px; overflow:auto">/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/Versions/A/Support/lsregister -kill -r -domain local -domain system -domain user</pre>
Then press return. Wait until terminal returns to the command line. Quit Terminal. After that, log out and back in or restart. Let us know
-mj

Ipod will not charge, keeps resetting, extremely low battery.

Someone please help!!
I adore my Ipod, its 2+, it was working fine, till a few months ago.
In the beginning, it stopped charging on the computer, it synced, but i would have to charge in on a Ipod radio thing first.
Then after awhile, on the radio, (it worked perfectly at first) the ipod would come up with the message, "This accessory not supported by Ipod", it would still play on it, movies, songs, and charge it, but the message would come up every often.
Now it refused to be recognized by the radio, and won't charge.
(yet if you press play the song and movies will play)
It had very little battery left so i bought a wall charger.
I tried charging with a wall charger and car charger!
Now its basically dead, and when i plug it on to the wall charger, the apple logo comes on, and it goes to low battery message, then apple logo..again again.
It just keeps resetting, so i took it off that.
Leaving on the charger for awhile won't work, because it just keeps doing that.
What do i do?
I can't restore it, because i'd have to charge it first!
(I got a new battery for it a few weeks ago, the battery life was way better, charged a bit faster, and it seemed to work better, but the computer still drained it)
Anybody have any ideas?
Please please please.
I swear i love it, but i'm going to throw it out the window soon.
-edit,
just to add, the first thing that went wrong, that started this thing, was when i got that -48 error, it doesn't do that anymore just to add
Message was edited by: Imjustkeeding

I have the same problem and sent my ipod to a the service center for a battery replacement. I was informed by them first by email that "Our technicians have performed full diagnostic checks on your IPOD 5TH GENERATION and have been unable to reproduce the symptom(s) you reported when you requested the repair. As a result of our tests, we can confirm that your product meets Apple specifications for performance, usability, and functionality." then I was told over the phone that they reloaded the software and firmware and that it is working properly and is being sent back to me. Then, and heres the kicker, I received my i pod back with a form stating it was a hardware failure affecting another component. I have since called multiple times and no one can tell me where the hardware failure is but the ipod still says its a battery issue. Go figure i think apple knows exactly what the faulty part is that is causing this error and has no solution short of replacing the unit and they dont want to replace the units of all those with this hardware failure

X-fi extrememusic keeps resetting to 2/2.1 speakers on a restart after vista upgr

I checked the knowledgebase and it said to make sure x-fi is default device and disable other devices, which I have done, but everytime I reboot the settings in audio console keep resetting to 2/2. speaker configuration when I used 5.. If I manually set it, it works until a restart. Using driver package Any ideas?

If you actually performed an upgrade installation of vista from xp i can almost guarantee you nothing will work perfectly as it should. Upgrade installations never work perfectly and tend to lag quickly , i recommend that you perform clean install of vista if you plan on using it for a while. You probably didn't want to hear that but unfortunately thats the way windows has always been.
goodluck
pete

Alarms keep reseting back to same time and OFF!

I can't figure out what the trigger is but about once a month my phone will have all the alarms I have setup in the clock application reset to default values. They all go to the same time, ringtone, and are set to off. This is the second phone I have had, and about the fifth reload from clean WebOS doctor installs of 1.4.1.1. This is a Palm Pre Plus on Verizon but I know others have had this problem on other carriers with WebOS.
This is to the point that I can't use the phone as an alarm clock anymore, which is a MAJOR function of my cell phone today. I need to get this fixed or I will have to find a new phone.
Post relates to: Pre Plus p101vzw (Verizon)

This is with two different handsets with NO additional software or patches on them at all. I am not the only one that is having this issue. Go look through the forums and you will see many others having this issue since 1.4.

HH3 clock keeps resetting...

Similar Messages

Maybe you are looking for