HH3 Modem Only mode?

I have tried to do as much digging on this subject as possible and cannot find what I thought would be a fairly straightforward answer to the question of whether or not it is possible to use the HH3 as purely a modem.
Let me explain a little about my situation first:
I am currently in an area that is supplied by Virgin (whom I am more than happy with) but am about to move into an area that is not cabled, therefore my broadband options are limited but BT would seem to be the best option for me.
I currently have a Netgear WNDR3700 Router which is both Gigabit and dual band wireless, which sadly the HH3 doesn't appear to be, therefore I want to let the netgear handle all network related actions (including DHCP etc...) and have the HH3 act as nothing more than a modem that supplies internet access to the above router.
As above, I currently have the Virgin equivelant of the HH3 (the Virgin Superhub) and whilst it can act as both modem and router in one, it has the option to turn it into a modem only so I can utilise the far superior qualities of the netgear router.
As I was hoping to not have to spend any more money on moving such as a new router/modem, is it possible to use the HH3 as described? I really do not want to ahve soem frankenstein system by where the router gets to do some fo the jobs but the HH£ does the others as this is just asking for trouble and poor performance.

With luck your line will be better than mine
Have a look at this thread which is relevant although it is on the infinity board  http://community.bt.com/t5/BT-Infinity/List-of-Routers-to-replace-Home-Hub-3/td-p/298203  and this  http://forumhelp.dyndns.info/wireless/hh3replace.html  if you scroll down to the bottom of the page on the last link the main menu refers to Keith-Bs font of knowledge which is frequently referenced on these forums

Similar Messages

  • WRT610N with netgear DG834gt in modem only mode - HELP!!!

    Hi all,
    As the title suggest, I need some help configuring the 610N to work with my previous modem / router DG834gt.
    So far I’ve tried:
    Setting the DG834gt in modem only mode.  It connects to my ISP no problem.  I’ve then connected it to the internet port on the 610N and set it to PPOE.
    I’ve set up the user name and password correctly and hit connect….Nothing.  It seem strange that I have to config the modem with the user / pass and the router, should I try to set it up as static or dynamic IP.
    What am I doing wrong???

    Hi... thanks for the reply and sorry for the bad explanation.
    I've set the connection type on  WRT610N as PPPoE.  The Netgear has a modem only mode accessed through a hidden menu ( http://vpncasestudy.com/download/DG/DG834_Tips100.pdf ) When in this mode it's apparently invisible.
    There's no DHCP or wireless, it literally makes the connection and nothing else. 
    You have to add the login credentials for your ISP into the modem, the modem makes the connection - my problem is working out how to configure the 610N to connect through the modem, if at all possible.
    Hope you can help - thanks.
    Dave

  • Problems reconfiguring ADSL modem+router to modem only

    I've currently got the Netgear DG834G working as a modem+router and connected to the AEBS which is in bridge mode.
    I want to use the AEBS as the router. I've discovered how to set the DG834G to modem only, but I cannot get the internet connection working like this. It connects using PPPoA. It asks me for a LAN IP address.
    I'm not sure what I should be entering on the AEBS. In Airport Utility, under Internet, I have connect using Ethernet, IP address as the static IP address given to me by my ISP, for subnet mask I've entered 255.255.255.0, for router address I didn't know what to enter, and I've tried using the same as the static IP address, also tried a slight variation on that (increased the last value), I've tried using the IP address of the modem, but nothing has helped. The DNS server settings I've entered are those provided by my ISP. For connection sharing, I've set it to Share a Public IP address. NAT is enabled.
    I've got no idea what is wrong. I've read in other threads about power cycling the devices, so I've tried that and it didn't work.
    Perhaps if someone could point me to the right settings, perhaps it's worth power cycling again with the right settings. I'm particularly baffled by 2 things 1) what the AEBS wants for the Router Address and 2) why the modem has an IP address (perhaps just for accessing it's web based control panel?).
    Help would be most welcome - I feel I have exhausted all of my 'trial and error' options.

    If your ISP has provided you with a static IP address, then they will also have provided you with a subnet mask, a gateway or router (they are the same thing in this context) IP address, and domain name server address(es). It is essential to know this router (or gateway) IP address.
    I've just reconfigured the DG834G back to mode+router, and noticed that when it connects it shows the subnet mark and gateway. My ISP only provided the IP address, and the Netgear seems to get the other details automatically. I have made a note of them, so I will try again entering them on the AEBS.
    What remains unclear to me is exactly what functionality remains to the Netgear device when - as you said - it becomes configured to work as a modem only.
    The info on the web control panel says it loses all routing functionality when in modem only mode.

  • How to set an Airport Extreme to DHCP only mode

    Folks,
    Right off let me advise that I have not even reached amateur status when it comes to this comms stuff, so please bear with me.
    I have an ISP supplied cable (no modem) that is connected to the WAN port of my AE.  The AE is currently configured to run in DHCP and NAT mode.  The ISP is apparently also supplying NAT since I am getting a double NAT warning from AE through Airport Utility.  Performance does not seem to be affected although I am seeing some tremendous slowdowns on a couple of websites.  From reading quite a bit of info here and elsewhere, I think I would like to run in DHCP only mode and let the ISP do the NAT control.
    This is when I run into a problem.  When I configure AE to run DHCP only, it asks for a range of addresses.  I have no clue what to put in here.  When I enter 192.168. ..., I get a message about invalid or overlapping address ranges.
    What do I need to do?
    Thanks,
    Jim

    As I said, it is very rare that an ISP would use this type of setup these days.
    You would already know if you had a bank of fixed IP addresses that were supplied to you by your Internet Service Provider, since they would have provided you with a document that listed all of the IP addresses to use.
    An example of this might look something like.......
    12.345.678.910
    12.345.678.911
    12.345.678.912
    12.345.678.913
    12.345.678.914
    If you do not have a document from your ISP with a list of specific IP addresses to use......then you cannot use the DHCP Only setting.

  • Turn X1000 into modem only ?

    Hi guys, is it possible to turn my X1000 to modem only since I have router WRT54G and it has better wireless coverage ?
    Thank you.

    For me, Linksys X1000 offers better coverage than the WRT54G. However, if you don't want to configure the wireless settings of the X1000, then just simply access the modem-router's page and disable the network and security mode under wireless. Once done, X1000 will no longer broadcast its wireless signal which means it is only acting as a modem.

  • How to provide a LINK on normal TEXT field in read only mode

    Hi,
    I have a TEXT item and that is used for only url purpose.
    so a user can enter something like http://www.abc.com in that field.
    So when I am in read only mode for that item, I want a link also on that text..
    how can I do that.
    thanks,
    Deepak

    You could create a pl/sql expression computation on the TEXT item which will convert the value shown for the field to be a HTML link
    '<a href="http:// ' || :PXX_TEXT || '">' || :pXX_TEXT || '</A>';Make the computation conditional using the same condition as is used to render the item as read-only
    varad

  • Jabber phone-only mode in CUCM 8.6

    Hi everybody! I heard that jabber can be used in phone only mode without the need of CUPS, but im wondering if it will work with CUCM8.6? I have seen configuration examples for CUCM 9, but there were some things that are missing in 8.6, like Service Profiles in users configuration. If yes then some config guides would be appreciated.
    Thanks

    I'm not sure but i think that Jabber supported only presence or webex.
    when you install the jabber you see the two options.
    Therefore, considering that i think that jabber can't work in mode desk phone of soft phone only with cucm.
    read the datasheet of Cisco Cucilync, it similar to Jabber and it can work with cucm only.
    actually, Cucilync provides integration between Cisco ip phones and lync of Microsoft, but you can use that without lync.

  • Issue regarding open word file and read only mode using c# & MS-word interop

    i am programmatically open a word file for search and highlight keyword. my routine is working fine. the problem is when i am opening the file programmatically then a dialog come and ask me to open file in read only mode. the dialog look like below one
    actually i do not want to open the file in read only mode because people can open and like to change and save. so guide me what i can do to not to open the file in read only mode.
    here is my full code. just have a look and tell me what is wrong in my code or tell me any trick as a result i can open the file not in read only mode. here is my code.
    private void button1_Click(object sender, EventArgs e)
                object fileName = "";
                string filePath = "";
                string strSaveasPath = "";
                DialogResult result = openFileDialog1.ShowDialog();
                if (result == DialogResult.OK)
                    fileName = openFileDialog1.FileName;
                    //strSaveasPath = Path.GetDirectoryName(path.ToString());
                //fileName = "Z:\\C0000000003.doc";
                List<string> _list = new List<string>();
                _list.Add("tridip");
                _list.Add("arijit");
                //object fileName = "D:\\CVArchievePath\\C0000000001.doc";
                object textToFind = "test";
                object readOnly = false;
                Word.Application word = new Word.Application();
                Word.Document doc = new Word.Document();
                object missing = Type.Missing;
                try
                    doc = word.Documents.Open(ref fileName, ref missing, ref readOnly,
                                              ref missing,
    ref missing, ref missing,
                                              ref missing,
    ref missing, ref missing,
                                              ref missing,
    ref missing, ref missing,
                                              ref missing,
    ref missing, ref missing,
                                              ref missing);
                    doc.Activate();
                    object matchPhrase = false;
                    object matchCase = false;
                    object matchPrefix = false;
                    object matchSuffix = false;
                    object matchWholeWord = false;
                    object matchWildcards = false;
                    object matchSoundsLike = false;
                    object matchAllWordForms = false;
                    object matchByte = false;
                    object ignoreSpace = false;
                    object ignorePunct = false;
                    object highlightedColor = Word.WdColor.wdColorGreen;
                    object textColor = Word.WdColor.wdColorLightOrange;
                    object missingp = false;
                    Word.Range range = doc.Range();
                    foreach (string line in _list)
                        textToFind = line;
                        bool highlighted = range.Find.HitHighlight(ref textToFind,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing);
                    System.Diagnostics.Process.Start(fileName.ToString());
                catch (Exception ex)
                    Console.WriteLine("Error : " + ex.Message);
                    //Console.ReadKey(true);
                finally
                    //doc.Close(missing, missing, missing);
                    if(doc!=null)
                        System.Runtime.InteropServices.Marshal.ReleaseComObject(doc);
                    if (word != null)
                        System.Runtime.InteropServices.Marshal.ReleaseComObject(word);
                    word = null;
                    doc = null;
                    GC.Collect();
                    GC.WaitForPendingFinalizers();

    I know it's a very old issue and I reached to this page looking for a solution. Finally, I have found a fix to this problem.
    The problem is that we create an instance of Word and do not close it correctly. This makes program believe that the file is already open and hence you're getting the respective message of file being locked by you.
    Set the visibility of your application to true and then when you close it both file and instance should close and you will not get the problem again.

  • I am not able to use Firefox with Sharepoint - I can only open a file in read-only mode and cannot checkout the document and edit.

    I would like to use Firefox with Sharepoint.
    However, I am only able to open a file in "read only" mode whch means I cannot edit the document and save it. I am also not able to "check-out" a document in Sharepoint and edit it at the same time.

    This may not work for everyone, but I solved this problem by clicking on the file name in sharepoint, not the document icon to the left of the name. This then brought up the various options, including checking out, editing, version history etc. It seems obvious but I have only just realised this!

  • ALV: columns in read-only mode look like editable columns in edit mode

    Hi,
    My application contains an ALV table which should be toggled between display and edit mode like the rest of the fields.
    The evident solution was to use
    if_salv_wd_table_settings~set_read_only( abap_true or abap_false)
    However, unlike the rest of the fields, when the application changes into display mode and the fields get grey like in any SAP application, the columns in the table which were editable remain white, and those which were not editable and thus grey, get now white, too, instead of the other way round. So it will look to the normal user, as if now all columns would be editable!
    Of course, he would realize that they are not when he tries to edit them, but this is irritating.
    See following link with screenshots (only active for 3 weeks from now on):
    [Link to my webmail space/SDN: .|https://businesswebmail.telekom.at/filestorage/MzYxMTk1OTMx/]
    I have looked
    through my books ("Einstieg in Web Dynpro for ABAP", "Praxisbuch Webdynpro for ABAP", ...)
    through the wiki for Webdynpro for ABAP here in SDN as well as through this forum (by searching with "ALV edit")
    through the notes in BC-WD-CMP-ALV
    but could not find any solution. Most tables in those PDF articles found here in the WD4A wiki also show white cells although they are probabliy in read-only mode (e.g. the imitation of the SE16N browser article).
    The attributes to the LO_CELL_EDITOR for both Inputfields and textview columns contain exactly the same values when toggling between display and edit mode (read-only in table settings), so also no chance to change here anything.
    Also changing the cell design is not a solution as there is no design that looks like grey for not editable according to WDUI_TABLE_CELL_DESIGN  ([SAP Help - WDUI_TABLE_CELL_DESIGN|http://help.sap.com/saphelp_nw2004s/helpdata/en/56/5e9041d3c72e7be10000000a1550b0/frameset.htm].
    I do not know if I have made an error, as this is my 3rd Web Dynpro (after the first 2 of the introduction book), or SAP is really inconsistent in User interface between "normal" fields and ALV table fields.
    Can you please help me?
    Thanks in advance,
    Erlend

    Hi,
    In my application aslo, i have 30 columns out of which 10 are input fields. But, i'm showing the table as ABAP_TRUE incase of Non-editable otherwise to abap_false. Now i'm getting everything as in WHITE cells.
    Do you want to show it is Grey mode with Non-editable feature. Is that so.
    How many columns are there which has Input fields.
    Get the column references.
    Now, based on the mode of display create the object as Input or Textview field.
    For that column -
    If mode eq 'D'.
    Create an object for Textview(cl_salv_wd_uie_text_view)
    else.
    Create an Object for Inputfield(cl_salv_wd_uie_input_field)
    endif.
    The Append row is a standard button or custom one on ALV toolbar.
    Do you want to hide the toolbar or just disable these buttons.
    If you want to hide the toolbar then refer my wiki -
    http://wiki.sdn.sap.com/wiki/display/WDABAP/NullreferenceforUPDATETOOLBARerrorsofALVinthewebdynpro+ABAP
    Regards,
    Lekha.
    Edited by: Lekha on Sep 30, 2009 8:06 PM

  • How to delete application deployed in Run Application Only mode?

    I have exported/imported an application (Run Application Only mode) from one DB instance to another.
    As a developer, I cannot see the application in Application Builder in the target instance. This is as intended because changes should only be made on the source (development) instance.
    After testing, there may be errors to correct. The application is not going to be a new version, it is going to be corrected on the source instance. Without creating a new version of the application on the source instance, what steps does the HTML DB admin take on the target instance to delete the application so the application can be imported again?
    Thanks,
    Kelly

    Thank you Scott. I missed the help text to the side of the install page that explained how an existing application is deleted and replaced.
    The tool provided the prompt page, Confirm Replace Application, before proceeding with the install.

  • Data entry form problem - form in query-only mode

    Hi there,
    I am trying to create an data entry form to insert recordacross 2 out of 3 tables. The last of the four tables already have details and does not need to have record inserted into.
    This is the scenario, my four tables are Factory, Employee, Works_in. Works_in resolves a many to many relationship between Factory and Employee
    Now for a person to be employed in a factory, he must be assigned to a factory.
    I have a list of factories already in the database. After choosing a factory from the database, I want to insert records to do with his Fname, Lname, Hiredate bla, bla, bla to the Employee table.
    I have a single form with Factory as the master, and 2 tabs each for Employee and Works_in.
    After linking all my tables with the ability to choose a factory first on the master form from a combo box and after inserting records into the other forms, it says form running in query-only mode.
    What do you think?
    Many thanks in advance.
    Cube60

    I think that's too much of the wrong information.
    It sounds like you have multiple forms. Are they Modal or Non-Modal?
    What code do you use to call the form that's not working?
    Does it work initially and then stop working?
    James.

  • Purchase Order form in Query only mode for some users

    Hi All,
    I want to make the Purchase Orders form as query only for a single user. I tried by giving 'Query_only=Yes' in the parameters section. I am getting 'FRM-04151: You cannot query records here' message more than 10 time. I know we get this message and this is applicable to all the users. But this message is comming more than 10 times.
    Is there anyway that I can restrict the Query only mode to a single user and please suggest about the message also.
    Thanks in Advance,
    Naresh

    Naresh,
    Since you want to achieve this for one user only, I would suggest you create a new function/menu/responsibility and assign this responsibility to the user.
    Note: 400380.1 - How To Create a QUERY-ONLY FORM
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=400380.1
    For the FRM error, please review the following document.
    Note: 116074.1 - ACCESS LEVEL - REVIEW ONLY - PO
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=116074.1
    Regards,
    Hussein

  • Called form in query only mode shows messages....

    Hi All,
    I am calling a form (say B ) in query only mode from a main form (say A) . When i query the called form B , i get 5-6 alerts (which has to be acknowledged by the user) and messages of the same error type saying :
    "FRM-40208 : Form running in query only mode . Cannot change database fields. "
    I have a 100 forms to be called from the main form A. So, I prefer not to change anything in the called forms . I tried to set message_level in the form A and code the on-error / on-message triggers to avoid the messages being shown, but nothing is working . Is there anything I can do in Form A i.e the main form ???
    Thanking you in advance.

    Since the error messages are being generated by form B, it is unlikely you will be able to fix form B problem using form A. Unfortunately, you may have to fix each of the 100 called forms.

  • How to know that a form is running in query-only mode

    I have a form that can run in query-only mode or non-query-only mode depending on the current user who logs in, and I want to change its apprearance dynamically when it's in different modes (for example, enable or disable buttons). Is there a built-in or system variable from which I know that the form is running in query-only mode or not?
    Thanks,
    Shu

    The global variable solution is what we are using now. I thought there are some unpublished built-in or system variables. In my application, there is a public "menu" form from where hundreds of forms are CALLed with some in query-only mode and some in non-query-only mode depending on the current user role. :PARAMETER.QUERY_ONLY will always be 'NO' because the "menu" form is started in non-query-only mode. But it's good to know about it.
    Thank you very much for your replies,
    Shu

Maybe you are looking for

  • Can not read or write to disk for itunes

    I started getting this error. attempting to copy to the disk elvia's iphone failed. the disk could not be read from or written to. What do you think this is?

  • Charged for subscription fee, but no results

    Yesterday, I was charged for my month subscription fee for a monthly 60minutes to France. Not only did the minutes meter of how many minutes left I have NOT change from 0 back to 60, but also, Skype is requesting another monthly fee due October 2nd?

  • Call procedure within procedure

    Hai I have some question 1) This below procedure create user at run time ============================================ create or replace procedure new_u1( p_name in varchar2, p_pw in varchar2, p_def_tblspace in varchar2 default 'users' ) as begin exec

  • Mouse-Wheel and Forms 10g

    How is it possible to use the mouse-wheel in webforms ? e.g. to scroll in a multi-record-block. Gerd

  • How can I move a subscription PDF pro XI from PC to Mac?

    I recently bought a yearly subscription for my PC to deal with PDFs (Pro XI). I now want to move it to my new iMac. Can this be done? Or do I need to buy another product just for a mac? thanks.