HH3 Poor Signal Upstairs

Hi
I have BT Infinity installed which comprises of the HH3 and modem downstairs.
I live in a two bed semi-detached and my devices and connections are as follows:
Downstairs/Connection
Xbox/No problems
Kindle Fire/No problems
Laptop/No problems
Mobile phone: No problems
Upstairs/Connection
PC/Interimittent (ok most of the time but can struggle where a connection drops altogether)
Kindle Fire/No connection (sometimes connects but then more or less immediately disconnects, when connected only 6mbps)
Laptop/No problems
Mobile phone: No problems
I have tried changing channels on the router which has little effect on the Kindle. I have downloaded a wifi analyser which shows that the bedrooms upstairs have a very poor signal reaching them (although the mobile and laptop seem to deal with this very well, and the PC most times).
Can anyone offer any advice to try and get the signal better upstairs? I would have thought a house such as mine should easily get signals in all arears from the HH3 but obviously not.
Thanks in advance

meso100 wrote:
Thanks
I have had a look at the wireless access points and the TP looks good. Can someone explain in n00b language what happens?
Will it plug into my router downstairs and push a stronger signal around the house? If so, its just a more powerful router then?
Confused..
You cannot get a more powerful wireless router, the maximum transmitted power is restriced by law to 100mW.
If you read my document you can see that there are two options.
Wireless repeater that boosts the signal in an areas that has a poor signal.
Or
Extra wireless point upstairs, connected over the mains and plugs into the home hub. See the last diagram on this
page.
The second option is normally the best, as it gives a faster connection, but has the extra cost of the powerline adapters.
You can try the first option, but the repeater needs to be somwhere upstairs, where there is still a usable signal, perhaps in a location above the home hub.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

  • New router WRT160N, but still same poor signal!!

    Hi all,
    Been having issues with my wireless signal being poor and/or intermitent.  I won't pretend to be computer literate, but I asked a Techie friend about this, and he suggested that I but a new router with the "N" signal. 
    My desktop signal is fine, but i have 3 laptops, and can be 30 feet away and get a fair/poor signal.  When I go into the bedroom, which is upstairs, and in the furthest distance away from the router, the signal gets even weaker.
    My Techie tried everything to bump up the signal, trying all channels, and even moved the router around the room.  No luck!!
    My house isn't made of steel, so there is no logical explanation for this... is there?
    Please  help me, and remember...I'm not real swarthy with the computer jargon,
    thanks very much 

    Try to change the Wireless Settings on your Router as mentioned below, i think it will improve the wireless signal strength on your computers. 
    Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
    For Wireless Settings, please do the following : -
    Click on the Wireless tab
    - Here select manual configuration...Wireless Network mode should be mixed...
    - Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbors network...
    - Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
    Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
    For Wireless Security : -
    Click on the Sub tab under Wireless > Wireless Security...
    Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
    NOTE : Passphrase should be more that 8 characters...
    Click on Advanced Wireless Settings
    Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
    Now see if you can locate your Wireless Network and attempt to connect...

  • Canon MP620 poor signal and slow printing

    Hi, I have a Mac Pro which is hooked directly up to my Time Capsule. I also have a Canon MP620 which is in another room. It communicates with my Time Capsule wireless and allows all my computers to print to it. My Canon MP620 has been working perfectly for a couple of months without any issues.
    recently my wireless computers (3 PC's) which are upstairs were having slower then normal internet. It wasn't that much slower but I noticed that when I went to youtube to watch a video, the video continuously stopped.
    My mom's computer was the worst though. The internet was very slow, pages took a very long time to load, similar to being on a 56k modem. Sometimes it was getting 1 mbps.
    This would be intermittent though, sometimes the internet would be fast and other times it wouldn't be slow and sometimes my mom wouldn't be able to get on the internet.
    I was having no problems printing to my Canon MP620 from any computer, it was instantaneous. To try to fix the internet for my mom's computer I tried changing the network password. So I had to go on each of my PC's and reconnect with the new Network Password.
    But I couldn't print to my Canon MP620. It was labeled as inactive. I believe that changing the network password caused the printer to not be recognized by my Time Capsule. I unplugged my Printer and hooked it directly up to my Mac Pro like I did months ago.
    I then put the Setup CD in, followed the onscreen instructions, It then asked me for my Network password which I gave it, it then asked me to unplug the printer and place it where it's going to stay. It then took 2 minutes to check the signal connection.
    When it was done it said the signal was poor, it said that it could print but it may be slow. I'm confused why it was getting a poor signal. The printer is located in the same place that it's been for a couple of months.
    When I first setup the Canon MP620 it had an excellent signal. I can print to the printer but it's very slow. Printing takes a long time for each page. I'm really frustrated, please help.

    This is more of an Airport issue than a printing issue. Printers require a good connection because a lot of data is being sent, so it's to be expected that a poor connection will result in slower printing.
    The reason for the sudden drop in connection quality could be radio interference. Perhaps someone in your neighborhood is using a wireless phone that interferes, or a microwave could interfere. Try to change the Time Capsule to a different channel (from within Airport Utility).

  • How do I use a 2nd Airport Extreme plugged into an Ethernet Wall Plug to join an existing wireless network to give me a better signal upstairs?

    I have a 5th generation Airport Extreme giving me a great wireless signal on the 1st floor of my house. However the signal upstairs is weak. So I purchased another 5th generation Airport Extreme that I would like to plug into an ethernet wall plug upstairs. I would then like to have the upstairs Airport Extreme join the same network thus giving me a good wirelss signal upstairs. I have a MacBook Pro running OS 10.7.4. Can somebody give me step-by-step directions to set up the upstairs Airport Extreme?

    I assume that the new AirPort Extreme is still in its original factory default settings.
    Before you connect the AirPort Extreme, please connect a laptop to the Ethernet cable that will be used for the connection and turn off the wireless on the laptop. Make sure that you can can connect to the Internet before you begin to configure the AirPort Extreme.
    Disconnect the Ethernet cable from the laptop and connect it to the WAN "O" port on the upstairs AirPort Extreme and power it up.
    Open Macintosh HD > Applications > Utilities > AirPort Utility 6.1
    Look in the upper left hand corner of the screen for a tab or box that reads "Other AirPort Base Stations (1)"
    Click on that box,then click on the name AirPort Extreme xxxxxx
    Wait a moment while AirPort Utility analyzes the network and then displays a message that the AirPort Extreme will be configured to extend your existing wireless network.
    Enter a Base Station (device) name for the AirPort Extreme (and a device password if prompted), then click Next.
    Wait another minute or two until AirPort Utility notifies you that the AirPort Extreme has been Set Up.
    That's it.

  • N8 poor signal reception and other hardware issues...

    I have always been a Nokia fan . I started with Nokia 6600, then N70, then N82 and now a Nokia N8.
    However, I am facing the worst experience with N8 reception issues.
    The problems faced are as under :
    1) Poor Signal Reception Issues - Signal strength is weak and is constantly fluctuating compared to other Nokia Phones. At my workplace, if Nokia N82 displays 5 bars, N8 would display only 1 or 2 bars.
    2) Phone freezes many times. Whenever an Alarm is enabled, phone freezed much more.
    3) Purple Tint in the display. Nokia Service Centre says that its normal but according to me, they are just ignoring this issue. 
    4) Vibration is weak : I often do not realize when the phone is vibrating in my pocket !! 
    Upcoming Symbian Anna will just improve the user interface but will not be able to solve these hardware issues.
    If Nokia plans a hardware update facility for N8 users wherein they can fix the signal reception issues and increase the RAM to 1 GB atleast, I would retain this phone for few years.  
    But, now, I intend to switch to Samsung Galaxy S II. 
    Your views solicited.
    Regards
    MODERATOR'S NOTE: This post has been edited as we do not allow the discussion of speculations concerning products or services which have not been officially announced by Nokia.

    sats_24 wrote:
    I have always been a Nokia fan . I started with Nokia 6600, then N70, then N82 and now a Nokia N8.
    However, I am facing the worst experience with N8 reception issues.
    The problems faced are as under :
    1) Poor Signal Reception Issues - Signal strength is weak and is constantly fluctuating compared to other Nokia Phones. At my workplace, if Nokia N82 displays 5 bars, N8 would display only 1 or 2 bars.
    2) Phone freezes many times. Whenever an Alarm is enabled, phone freezed much more.
    3) Purple Tint in the display. Nokia Service Centre says that its normal but according to me, they are just ignoring this issue. 
    4) Vibration is weak : I often do not realize when the phone is vibrating in my pocket !! 
    Upcoming Symbian Anna will just improve the user interface but will not be able to solve these hardware issues.
    If Nokia plans a hardware update facility for N8 users wherein they can fix the signal reception issues and increase the RAM to 1 GB atleast, I would retain this phone for few years.  
    But, now, I intend to switch to Samsung Galaxy S II. 
    Your views solicited.
    Regards
    MODERATOR'S NOTE: This post has been edited as we do not allow the discussion of speculations concerning products or services which have not been officially announced by Nokia.
    I am agree with poor signal issue with nokia N8. I have two cell with one is N8 and other one is N26 with nearly 4.5 year old but at same place Nokia N8 showing very poor quality of network signal compared to N26. So for same network provider with two different cell with same manufacture how can drastic different that is also investing nearly RS.22000!
    Please resolve the issue ASAP.
    Regards,
    Praful

  • I got reception problem in my 4g both gsm and wifi ? in form of very poor signal why*

    i got reception problem in my 4g both gsm and wifi ? in form of very poor signal why*?? it was working fine suddenly the signal became bad and when i make phone call the other person on the seceond side doent hear me but when i use face time it is working , and the wifi signal is the same there is no or poor signal , signal improve only when i get closer to the modem that provides wifi at home or any wifi hot spot
    is it antenna problem ? or what???

    That thread helped for a time.  But now it seems as though my computer is back to slow again.  But, some of the jargon is over my head as well.  Not sure I knew quoite everything they were talking about.  But thanks a lot for that, it helped I probably just need to reread it and follow the instructions again.  Thanks so much.

  • Poor signal/loss of channels

    Hello all. I recently lost BBC1 due to 'poor signal/lost connection' but all other channels (including BBC) were ok. The next day ITV1 channel lost due to same issue (but again, not all ITV channels). Checked aerial leads ok which they were. Just done factory reset after googling for advice and after scanning for channels again have lost numerous other channels, including 1-10 (first channel now listed is 11).
    Any advice for me please? Please bear with me - I am not very technical!
    Thanks

    Welcome to the forum. Purging the channel list can sometimes restore missing channels. Remove the aerial and do a channel scan, which will clear the list. Then replace the aerial and scan again.
    You can click the white star next to this message if you think it was helpful.

  • How to fix the signal with the microphone to the computer when recording through an interface? every time i record and play back i get poor signal and a lot of fuzz

    How to fix the signal from the microphone to the computer when recording through an interface in logic pro? Every time i record and playback i get poor signal and a lot of fuzz.. how can i fix this problem?

    Which model computer?
    What operating system?

  • "Poor Signal", "Coverage hole pre alarm for client" after changing from Autonomous to Lightweight infrastruture

    Dears,
    I use to have wireless infrastructure based on autonomous APs 1142n, auth w/ 802.1x and everything was fine.
    My Company decided to implement WLC 5508, and I changed only 2nd floor (2 APs) as lightweight and implement WLC over there as pilot testing...
    Now All persons here (around 35 clients) are complaining about disconnections, poor signal...
    Both APs are distant each other maximim of 15 meters... Our office has a medium open spaced room, with (20 X 15 meters) only 2 "Pilaster" in the middle of the room.
    I am facing this message at WLC logs
    Thu Nov 1 16:03:57 2012
    Coverage hole pre alarm for client[1] 00:37:6d:eb:67:44 on 802.11a interface of AP 00:26:cb:4c:8e:b0 (AP01-RJOBTF). Hist: 1 0 3 4 1 1 2 7 2 9 10 13 4 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    Thu Nov 1 15:55:21 2012
    Rogue AP : 7c:4f:b5:ed:27:a1 detected on Base Radio MAC : 1c:aa:07:6e:93:20 Interface no:0(802.11b/g) on Channel 11 with RSSI: -92 and SNR: 1 and Classification: unclassified
    Thu Nov 1 15:50:27 2012
    Coverage hole pre alarm for client[1] 28:e0:2c:6d:11:58 on 802.11b/g interface of AP 00:26:cb:4c:8e:b0 (AP01-RJOBTF). Hist: 0 0 2 5 11 16 9 2 5 12 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    Is there any best practices I should perform over here ?
    Any specific configuration with the signal itself ? In my opinion we dont have a big room here .. 2 APs should work very well... but they are not...
    I also can see many Rogue APs... I am not sure if that rogues aps have anything to do with this problem.... also I didnt change anything at 3rd floor (not sure if the
    Thanks in advance!!!

    Actually I am using both APs as lightweight in 2nd floor.
    How about this power level? where I can find those parameters ?
    At 3rd floor all APs are autonomous, I accessed one of them and find this parameter
    CCK Transmitter Power (dBm):           Max
    OFDM Transmitter Power (dBm):           Max
    Client Power (dBm):                     Max
    is that the parameter you talked about ?
    At WLC I found this screen
    Tx Power Level Assignment Algorithm
    Power Level Assignment Method
    Automatic
    On Demand
    Fixed
                             1                         2                         3                         4                         5                    
    Maximum Power Level Assignment (-10 to 30 dBm)
    Minimum Power Level Assignment (-10 to 30 dBm)
    Power Assignment Leader
    Last Power Level Assignment
    Power Threshold (-80 to -50 dBm)
    Power Neighbor Count
    Should I check anything else ?
    Thanks in advance!!!

  • Samsung s6/s6 edge poor signal

    Hi,
    Is anyone else getting poor signal strength from their s6 or edge? I have an s6 edge and whereas my old nexus 5 used to get full 4g signal at home my new phone gets 1 or 2 bars. Download speeds are not fantastic considering I am on a 4gee contract now. Is anyone else experiencing this or do I have a dud phone? I went into store to ask but they dismissed me saying I should have a software update soon that may fix it.
    Thanks

    Yes- extremely poor signal. Phone only ever displays one or zero bars of signal; I'm based between home and uni just outside London; so signal should be very good. I've had the phone for about a month now and experiencing problems with dropped calls, failed texts and issues connecting to WiFi on AC and N bands (the latests and most secure signal bands). I think it might be a problem with the antenna but everyone I've spoken to at EE have been very unhelpful. Fortunately, Samsung offers a 24 month warranty, so it might be worth going to them to get the phone repaired or replaced? 

  • WRT610N...very poor signal

    I recently purchased a WRT610N to replace my WRT160N because my new 2.4ghz baby monitor took down the wireless internet on the WRT160N. On Linksys' recommendation I also bought a 5ghz wireless adapter for my new Dell laptop, a WEC600N (previously I was using the internal 2.4ghz wireless on it which has now been disabled). I am finding that the WRT610N is giving me very, very poor signal when I'm only two rooms away from it. I have unplugged all of my cordless phones and that does not improve the signal so I do not think they are conflicting. Nothing else is wireless in my house (except the baby monitor which operates on 2.4ghz) so nothing should be conflicting. I have talked with Linksys support twice online and they had me change some settings in the advanced wireless tab but that did not help. Anyone have any ideas? This is very annoying and I hope to get it fixed soon. I can get two bars of signal (and that's about the best I can get) if I'm one floor down but if I'm on the same floor as the router and just two bedrooms away I get such a poor signal I can't even connect. Thanks!

    Access setup page of router ......
    Click wireless >> Click on Advanced Wireless
    settings>>Change the Beacon Interval to 75 >>Change the Fragmentation
    Threshold to 2304 Change the RTS Threshold to 2304 >>Click on "Save Settings"

  • Poor signal on 3gs after iso 5

    why poor signal on my iphone 3gs after iSO 5 update?

    Same here:
    The update of the iPhone 3Gs if awful. Updates should never break things that work. After updating my iPhone, WiFi and Bluetooth sensitivity are down. I cannot connect to the WiFi in my house at 12 ft. Bluetooth loses connectivity at just over 2 ft ( from my ear to my pocket), come on now, all this worked well before the update. App's are very jumpy, not nearly as smooth as before.
    If this is Apple's way of forcing an update, I may not be an Apple customer anymore.

  • HT203124 That really *****, we have 4g, but poor signal outside cities, so it drains battery in 1 day! All other phones has 2g option,maybe it is time to switch to other os!

    That really *****, we have 4g, but poor signal outside cities, so it drains battery in 1 day! All other phones has 2g option,maybe it is time to switch to other os!

    There may be nothing wrong with the phone.   If the signal in your location is weak then the fault lies with the providers of that signal.   Perhaps an alternate provider would help, even if the service costs more.  Ultimately, in most countries it is the government that encourages the improvement of infrastructure.

  • Linksys EA2700 poor signal

    Hi,
    Recently I bought a EA2700 Wireless router for home internet connection.
    I live in Single bedroom flat and my router is placed in the main hall.
    If I try to access Wifi from Bedroom, unable to connect to internet due to poor signal.
    Please help me to improve the signal strentgh so that I can access the interenet any corner of my flat.
    Thanks,
    Ravi 

    Hi,
    Yes channel 9 is a good channel. I also sometimes used channel 1 and channel 3 for better wireless coverage.
    I upgraded the firmware of EA2700 router then do hard reset. It worked fine. I don’t have any signal concerns now.
    I checked interference see this link Interference factor
    You can do also a non-stop ping unlimited pings
    I use this procedure in order to test the wireless signal limit.
    I don’t have any signal glitches with this router. I placed the router above the floor on top of a wooden table.
    I make sure my wireless adapters are update. I used Inssider also and it is a very good tool. I had it installed in my Ipad with wifi network analyzer. I enjoyed using my EA2700 because I can get a good signal and constant download speed.

  • Poor signal htc one m8

    Very poor signal Htc one M8. started about 3 weeks ago. per customer service at Verizon a tree or bird is the cause of my issue. Not the only one with this issue in my area. Any thoughts or suggestions. Thinking of leaving Verizon wireless to another carrier.

        I apologize for the issues, tecanic1. However, being in a pocket of an extended network can be why the data and service can fluctuate. Have you tried removing and reinserting the sim card to reset your connection? If not, just that a try and also confirm the exact zip could of where you're located besides the 01520. 
    Thank you!
    EdW_VZW
    Follow us on twitter @VZWSupport

Maybe you are looking for