HH3 wireless range reducing

The wireless range on my HH3 appears to have reduced. I haven't changed its position in the house. It's connected directly to the master socket. If I'm in the same room then I get a good connection. However if I go elsewhere in the house where I've previously had a good reliable connection it can drop out.
Any suggestions?

you can try downloading inssider3 (istumbler if MAC) and then run it. This will show the broadcasting networks round about you and their channels including your own. If you then enter your router and change your wireless channel to a free or less congested channel.
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Similar Messages

  • Reduce Wireless Range

    I would like to restrict access to my wireless. Is there any way to reduce the wireless range? Or make it possible to only allow my computer access?
    I bought the WRT54G V8 because I wanted web access for my laptop. I connected the router to our home computer -- so now I'm sharing the cable access with it. It's solely for home use and I don't want neighbors tapping into it. Is there anything I can do to secure my connection for my personal use, and not for any of my neighbors?
    I tried looking online and reading the manual, but I couldn't find a definitive answer. I'd appreciate any & all help

    No there is no way to reduce the wireless signal that I know of (short of painting your walls with copper bottom paint for boats).  Now if you configure your wireless network with WPA or WPA2 wireless security that would restrict access to your network.  To do that access your router and go to the Wireless tab then to the security sub tab and configure your settings.  Write down your settings so when you connect your wireless devices to you network you can enter the security settings the same as it is in your router.  Then keep those settings in a safe place for the next time you want to connect another wireless device to your network.
    Richard Aichner (Ikester)

  • Extend Time Capsule Wireless Range

    I am having trouble with my Time Capsule's wireless range. I am not a networking expert by any means. I own an old building that is 4 stories connected by stairs with thick walls. All the rooms ethernet cables converge in a cubby on the 3rd floor. I placed my Time Capsule in the cubby, but I couldn't receive a wireless signal from the 1st floor. This is ironic because I have an old Netgear G router that sends signals throughout all 4 floors. So I bought an Airport Express to extend my network wirelessly, but the signal has been unstable perhaps because the Time Capsule's wireless signal is too weak. So I want to connect the Airport Express on the 1st floor using the Ethernet link from the 3rd floor Time Capsule which is my main router. From my research, I discovered about WDS networks, which I believe you have to use in order to create a network with multiple Apple base stations linked through ethernet.
    I called Applecare who told me:
    -To connect from Time Capsule to Airport Express using Ethernet, must use WDS network. Setup Airport Express as Relay, NOT Remote.
    -Relay- Direct ethernet connection from Time Capsule to Airport Express, then wireless connection from Airport Express to Macbook.
    -Remote- Wireless signal from Time Capsule to Airport Express, then direct Ethernet connection from Airport Express to Macbook
    I have several questions for you wise people out there:
    1. To extend the Time Capsule wireless network using the Airport Express, but connected directly via ethernet, do I need to setup a WDS network?
    2. I prefer to just use the simple Apple settings "extend network wirelessly". Will this setting only boost a wireless signal received from the Time Capsule? Can it not extend a wireless signal sent directly from Ethernet?
    3. I'm considering getting a Quickertek Triband antenna to place outside the cubby. Anyone have any experience with Airport external antennas?:
    http://www.quickertek.com/products/timecapsuletriband.php
    Any information would be much appreciated! These networking issues have been giving me months of headache.
    Thank you!
    Alexander
    Specs:
    Apple Time Capsule 1TB
    Airport Express N version
    Connected with 2.4ghz. band to N capable Macs.

    Extending your network with an AirPort Express (AX) won't boost the TimeCapsule's (TC's) range per se. It will expand the network's range by adding another transceiver.
    If you'd prefer to avoid using Ethernet to connect the TC and AX, you might get a better signal on the first floor if the AX was on the second floor, i.e, roughly halfway between the TC and the 1st-floor computer. [Extending the range of an 802.11n network|http://docs.info.apple.com/article.html?path=AirPortUtility/5.1/en/ap21 24.html] describes how to configure them.
    If an Ethernet linkup is no problem, though, that should work even better. In this case, it's best to use different (by 3 or more) channels on the 2 stations to reduce the chance that they'll interfere with each other.
    Either way, it's best to use the same network name, network password, and encryption on both stations so you can roam freely through the building without needing to switch manually between them.
    [Designing AirPort Networks 10.5-Windows manual|http://manuals.info.apple.com/enUS/Designing_AirPort_Networks10.5-Windows.pdf] is another good resource you may find helpful.

  • Apple TV to HH3 wireless - no option to enter pass...

    Hello all - looking for help.
    Just trying to install Apple TV. It spots my HH3 wireless network but then tells me that wifi password I entered is not correct.
    It hasn't given me an option to enter one!
    Any ideas?
    Thanks in advance.

    What do you see under settings?
    Do you have a network setup?
    1. Network Configuration
    Have your network password (if you use one) and your Apple Remote handy to configure your Apple TV. Make sure there are no obstructions between the remote and Apple TV. Read more about using and troubleshooting the Apple Remote.
    If you:
    Use a wired Ethernet network to connect, Apple TV automatically detects your network.
    Use a wireless network to connect, Apple TV helps you select and configure your network connection.
    Connecting to Your Wireless Network
    Apple TV will help you connect to your wireless network. If you use a password to access your network, have it ready. Use the Apple Remote to:
    Select your network from the list, or enter your network name if the network is hidden.
    Enter your password (if you have one).

  • POOR wireless range

    I have a white 13" macbook which i bought about 6 months ago. We have the new BT home hub wireless router (the black V.2 model). I can get the network no problem in the adjacent rooms but as soon as i go upstairs i get nothing. Can anyone explain why my range is so poor??

    Hi sutton185,
    Welcome to the forum.
    There are a lot of variables that can affect the "performance" of the range of your wireless router. Location of the router, interference from other electronic equipment (telephone, TV, radio etc) and walls are just some that immediately spring to mind.
    In these situations, one of the first things I would do is change the wireless channel and/or the location of the router. If the symptoms still remain, you may need an additional wireless router (like Apple's Airport Express) which will be configured in WDS mode and act in extending the wireless range.
    To change the wireless channel you'll need to log in to your router. With the BTHomehub simply fire up a web browser and enter 192.168.1.1 in the URL field. Click on Advanced... in the left list and Advanced... again. The default username is admin and the password is admin again. Then select Wireless from the Advanced submenu on the left and on the right, at the top, you'll see the following menu items: Settings, Encryption, MAC Address Control, Repeater. Ensure that Setting is selected and from the drop down menu in the Channel field select a different channel and click Apply. You may have to experiment with different channels; try Channel 11 first and work from there.
    Kryten

  • Given wireless range of Time Capsule is 150', will this work? Put DSL modem on phone line in garage, connect ethernet to small office bldg (125') and connect separate ethernet to main house (200'). Time capsule on each end (or Airport Express)? Thx

    Given Time Capsule wireless range is 150', will this solution work? In detached garage, connect DSL modem to phone line, then connect ethernet cable to DSL modem and run 125' to small office bldg. Connect separate ethernet cable to DSL modem and run 200' to main house. Put time capsule or Airport Express in each bldg resulting in separate wireless networks in each? Thanks.

    This will work very well. You can run a CAT5e (or CAT6) Ethernet cable up to 330 feet...or 100 meters...with virtually no signal loss.
    CAT6 costs a bit more, but will handle next generation Ethernet speeds, so if you have a choice, suggest that you opt for CAT6 cabling.

  • How to shorten wireless range

    I have a linksys BEFW11S4 ver.4  i want to shorten the wireless range. Anyway to do that?

    You could try removing the two antennae (spelled with 'ae' intentionally) depending on how short you want / need the range to be and see if
    a) it works that way
    and
    b) the range is not too short that way.

  • Can I run a cat5 cable to a 4 port hub from a cisco router then connect one of the hub's output ports to an airport express to 'extend' my wireless range?

    Can I run a cat5 cable to a 4 port hub from a cisco router then connect one of the hub's output ports to an airport express to 'extend' my wireless range?
    Flow would be
    Cable modem---->cisco e2000 wifi router (This is broadcasting wifi but not strong enough)---->4 port hub ---->airport express (to extend the wifi in another part of house)
    thanks!

    Yes, you can do this as you stated. In essence you will want to configure both routers for roaming network. Please check out the following Apple Support article that describes this type of network. Although this article uses two or more AirPorts, it can be done with just about any manufacturer's router.

  • WUMC710 could play as wireless range extender & Bridge role at same time?

    If using bridge WUMC710, could it play the role as a wireless range extender for my wireless devices and at same time also as bridge to connect wired devices such as internet ready TV with router?

    Hi,
    The WUMC710 is only designed as a wireless bridge. There's no option to set it up as a repeater - bridge. Even DD-WRT don't have it on their compatible hardware list - only WAP54G. You might be interested on this DD-WRT Wiki article: Linking Routers: Repeater Bridge.
    Check this table for comparison with current Linksys wireless bridges:
    - Article ID 26631: WUMC710, WES610N and WET610N product comparison
    If everyone needs to believe in something, I believe I'll have another beer..

  • Ipad 2 Wireless Range Sucketh?

    Ok, I love my new Ipad 2, but someone please tell me the itty bitty wireless range is not a hardware issue? I can only use the Ipad in the same room with my router or I lose all bars until the connectivity disappears and Ipad cant even find the network. I dont really need an Ipad in the same room as my laptop. I bought the device because it is small and portable.
    Any clues on how to improve the range?
    Realy disappointed in my $700 toy.
    iOS 5.0.1 on a fresh Ipad 2.

    the range on my iPad isn't as good as my Touch, but it should be better than that. You don't have it in any sort of case that would block/impeed the antenna? as I understand it, the antenna is behind the Apple logo on the back.

  • 871w wireless range

    have a 871w in small business aplication. What is the best way to increase wireless range for laptops used with-in the office?

    thanks for getting back to me. The offices are in a converted barn around a court yard, 25m square, so the area is quite obstructive. There is also a further workshop where I use my laptop whilst working on the bikes (I'm a motogp chassis consultant). Across the courtyard opposite the main office is signal is ok'ish, but can drop off at times. Keeping blinds etc open helps, but in our current winter isn't always an option! So, was just after something that would increase the strength of the current signal. I've seen the optional antennae for the rear of the unit, or the remote antennae to put around the offices, but don't want to waste time & money on getting something which isn't going to help.
    Regards,
    Mark

  • Airport Express to extend wireless range?

    Just received an Airport Express for Christmas and wanted to use it to extend my wireless range. I have an Asante FR1004AL wireless router connected via ethernet to DSL modem and a Titanium Powerbook using OS 10.3.9 and an original Airport card. I am interested in finding out how to make the AX extend the wireless connection, when I plug it n all I get is a flashing amber light and can't access the Asante via Airport Assistant to make any adjustments. I am wondering if anyone can tell me if the AX will recognize the Asante router since I can't make it work. If the Asante is compatible, I guess I need some instructions about how to get the AX to work with this setup. I have no experience with wireless setups, very much a novice in this area.

    The only way you can extend the wireless range is to run an Ethernet cable to the Airport Express and set what's called "active roaming" (see Apple's Knowledge Base; search for "active roaming").
    In order to extend the range strictly wirelessly, you need a base station that supports the flavor of Wireless Distribution System (WDS) that Apple uses in their base stations. As far as I know, only Apple Airport Extreme/Express base stations, LinkSys WRT54G, certain Buffalo Technology models, and one Belkin model support a compatible WDS protocol.

  • Increasing wireless range by upgrading airport card?

    I have had my powerbook G4 1.5 GHz for a little over 3 years and its been great for me except for its wireless range is somewhat lacking. When i have little or very limited connectivity people next to me with the new mac books have full reception. Now i know that their computers have new hardware and possibly better antennas but i was wondering if there was any way to increase the range of my powerbook by upgrading some of the internal hardware. I have seen other posts and people have shown products that are external but i feel that would be a last resort since they have a better chance of being broken. Is there any way to increase the reception by installing a new airport card or better antenna?

    Hi, El M. Since the day it was new, my son's Aluminum Powerbook with Airport Extreme card has had less than 1/3 the range of my Titanium Powerbook with original Airport card — and the Tibook's range isn't great. If you really want better range, a third-party CardBus wireless adapter is the way to go. Some can use optional auxiliary antennas to extend their range even more, but the card alone will give you a dramatic improvement.

  • Just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????

    just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????

    Temporarily connecting your AirPort Express to one of the Time Capsule's Etherent LAN <-> ports...as LaPastenagure suggests....is always a good way to setup and configure other network devices.
    If you want to configure the Express using wireless, remember that the Express broadcasts a default wireless signal with a name like Apple Network xxxxxx. You must log on to this network first....no password is required....then open AirPort Utility to "see" the AirPort Express.

  • Express or Extreme better wireless range extender?

    I own the latest Airport Extreme as my base station.  I also own a prior, 5th generation Extreme 802.11n, and a prior generation Airport Express 802.11n (the one that plugs directly into the wall).  Two questions:
    -- Which of these two would be a more effective wireless range extender for my base station? 
    -- Would there be any disadvantage (eg diluting the signal) to using them both, in different locations in my house? 
    Thanks.

    -- Which of these two would be a more effective wireless range extender for my base station?
    The AirPort Extreme has a better antenna arrangement, so it would normally work better.
    -- Would there be any disadvantage (eg diluting the signal) to using them both, in different locations in my house?
    The network slows down a bit with each wireless device, but the effect of having greater wireless coverage will probably disguise that.
    Most users would rather have better wireless range, even if they must give up a bit of speed.

Maybe you are looking for

  • Can not view Status diagram when clicked on status diagram in workflow admi

    Select work flow administrator as responsibility. Select status monitor. Put in internal item type. I am using PAAPWEBX Click on go. Then click on any record and click on status diagram. All I get is a blank screen. When I look into Java console here

  • I want to edit an existing .rtf file from my PC on my iPod Touch. What do I have to do?

    I have a new iPod Touch, and an existing .rtf file on my Windows 7 PC that I wish to edit when traveling. I want to be able to do this regardless of having an internet connection.  What app(s) do I need, what file type should I convert the .rtf to, a

  • JAXB unmarshaller error in JAX-WS web service

    Hi, We have a JAX-WS web service deployed to WLS 10.3.3.0 as an EAR file. The EAR file deploys without any problems, but the first time we attempt to call an operation we get a classloading problem when we run the following code snippet (I've put a c

  • Playing music to WiFi speakers

    I'm not sure if this is the right forum for this question, so if there is a better one, please let me know. I am using a WiFi speaker to listen to music from iTunes. The two are not in a direct line of sight, but they are less than 6 yards apart. Mos

  • How can i set up a VPN?

    I have a g3 ibook and i take it places... i want to be able to access all my files and music from my g4 digital audio powermac i guess that VPN is the way to go, how do i go about setting this up?