HH3b no longer working as a repeater

So after 8 weeks of my HH3b acting as a complicit slave to my HH4a and delivering wi-fi across the house it has stopped working.
I've reset both routers and set them up again as per http://forumhelp.dyndns.info/wireless/hh3link.html but no joy.
I've removed the Powerline adapters from the equation - still no joy
I've reset the HH3 again and plugged the Infinity cable straight into and it delivers a wireless broadband signal so I think the router is fine
It just seems that the HH4 has fallen out of love with the HH3 and they won't speak to each other.
Does anyone have any ideas?
Thanks

Thanks for your reply redeye.
I had a similar thought, does anyone know? You would think others would be voicing similar problems.
I tried setting up a 2nd HH4 as the "slave" yesterday but with no luck either. Final plan is to set-up HH3 as master and try to establish HH4 as the slave but I'm now holding my breath
Am almost completely resigned to having to get a Netgear Universal Wi-Fi Range Extender. Anyone got any experiences of using one?
Thanks

Similar Messages

Shuttle No Longer Works. Song Playing Repeats

Starting yesterday, no matter what mode of iTunes my iPhone is in, Shuttle no longer works. The first song that is played repeats after it is finished. To move on, I have to press fast forward.

Play a song.
Tap album artwork (center)
Another set of options appears near top
Repeat, Progress and Shuffle.
Blue means on, White is off. There are three settings for repeat..sounds like you are on a Repeat 1 (blue with number 1)

Shuffle no longer working with headset

Today I got prompted to upgrade my iPod software so I did...and the shuffle (2nd gen) no longer works. The flashy lights were green orange green orange. I went to the help website and dutifully restored factory settings with iTunes. Still doesn't work. Played with various permutations of the off switch (including the 5 second wait mentioned on the help site)and repeating the restore pathway and that didn't work either. The shuffle loads music fine and iTunes recognizes it and even plays the music but when I undock it (making sure to disconnect the shuffle properly) and connect headphones and hit play, the green/orange blinkies reappear.
Any ideas?
itune version is 7.3.1.3
ipod version is 1.0.4
I suspect this may be part of the problem. I can't upgrade to the latest version of iTunes because of my OS (win 2000). So I'm hypothesizing that when the shuffle tried to update, it failed due to the old iTunes version and somehow the drivers got screwed up.
Also, I just downloaded the iPod reset utility and tried that to no avail.
Any ideas? or should I just go to a store?

It's not a hardware issue. I have the exact same circumstance. After being prompted and then updating the software on my shuffle, it quit working. All I get is the green-orange flashing light. iTunes recognizes it's connected, restore works, and syncing works, but the shuffle does not work.

Canon iP2700 is no longer working after update

My Canon iP2700 is no longer working after doing an update yesterday. I am using the cnijfilter-ip2700series 3.30-2 from https://aur.archlinux.org/packages.php?ID=41797 with cups 1.5.2. I have blacklisted usblp, but this doesn't help. My printer is recognized, and apparently I can print but nothing happens. This is my error log:
tail -n 100 -f /var/log/cups/error_log
D [09/Mar/2012:13:58:16 +0200] [Job 4683] usb_find_busses=0
D [09/Mar/2012:13:58:16 +0200] [Job 4683] usb_find_devices=0
D [09/Mar/2012:13:58:16 +0200] [Job 4683] STATE: +connecting-to-device
D [09/Mar/2012:13:58:16 +0200] cupsdMarkDirty(-----S)
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Printing jobs and dirty files"
D [09/Mar/2012:13:58:16 +0200] [Job 4683] STATE: -connecting-to-device
D [09/Mar/2012:13:58:16 +0200] cupsdMarkDirty(-----S)
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Dirty files"
I [09/Mar/2012:13:58:16 +0200] [Job 4683] Waiting for printer to become available.
D [09/Mar/2012:13:58:16 +0200] cupsdAcceptClient: 16 from localhost (Domain)
D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 POST / HTTP/1.1
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [09/Mar/2012:13:58:16 +0200] cupsdAuthorize: No authentication data provided.
D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 1.1 Get-Notifications 1
D [09/Mar/2012:13:58:16 +0200] Get-Notifications /
D [09/Mar/2012:13:58:16 +0200] cupsdIsAuthorized: requesting-user-name="irenke"
D [09/Mar/2012:13:58:16 +0200] Returning IPP successful-ok for Get-Notifications (/) from localhost
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 WAITING Closing on EOF
D [09/Mar/2012:13:58:16 +0200] cupsdCloseClient: 16
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
And this part keeps repeating every 5 seconds with different timestamp, until I delete the document from queue.
The CUPS ownership of the USB device file seems OK:
ls -l /dev/bus/usb/001/006
crw-rw---- 1 root lp 189, 5 Mar 9 14:17 /dev/bus/usb/001/006
I've been working on this problem since yesterday and now i'm stuck. Can someone please help?
EDIT
I think it's something related to the driver. If i change the driver to another printer model from CUPS the printer works. Prints garbage, but at least works. So this means that we have to wait for a new driver or what?
Last edited by otx (2012-03-09 14:21:27)

See if this is any help: https://bbs.archlinux.org/viewtopic.php?id=136415

Bluetooth no longer works with Toyota

After the 2.01 upgrade, the bluetooth connection with my Toyota Sequoia no longer works. It will pair but will not be recognized.

Actually, I'll bet you can get it to link-up, but indeed, since V 2.0.1 mine doesn't automatically link anymore, the key word being "automatically". I discovered that you can manually force it to be recognized in my 2007 Toyota Prius, but you have to re-enter the 4-digit pass code every time you start the engine. Try this: On your iPhone, go to Settings/General/Bluetooth, and un-pair your Toyota device (which the default is "Hands Free". Then, from the Toyota's main phone screen: Settings/Bluetooth/Register. Finally, enter the 4 digit code shown, into the iPhone, which by now should be looking for that code.
Again, this is just a one-time work-around, which unfortunately must be repeated every time, until someone figures out how to restore the automatic linking.

Import form cam no longer works after Update to iLife 09

Hi, I've updated to iLife 09 and installed the most recent patches. With iLife 08 my Fujifilm Finepix F30 was recognized by my mac book pro, iPhoto starded up an the contet of the cam was presented for import as soon as I connected it by USB. With iLife 09 all this no longer works. iPhote is fired up but nothing else happens but that iPhote freezes so the only thin I an do is to kill it ... now it's more or less useless for me
Please help !
TIA
frantek

Start with the troubleshooting basics:
1. Delete the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
2. Repair Permissions using Disk Utility
3. Create a new account (systempreferences -> accounts) and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.
Regards
TD

When I did 7.1 update on iPhone five my reminders no longer works correctly it automatically erases the time and date that I requested

Can somebody tell me why my reminders no longer work correctly on 7.1 update on iPhone five every time I post a reminder it would delete the time and date of the reminder and my reminders do not go off.

Remove Office 2008 for Mac using Microsoft deinstall procedure. Reinstall Office 2008 for Mac. If there are updates, apply them. Using Disk Utility, verify/repair permissions on your boot drive.
Does Office for Mac 2008 now work correctly? If not, you may want to repeat the above first sentence, and then update to Office for Mac 2011, and apply the latest (14.4.8) update which has Yosemite fixes.

TS3581 iPhone 4S - The XCarlink iPhone/iPod accessory for Mazda Bose autochangers is functioning differently after iOS 5.1. The Shuffle function no longer works. Has anyone else experienced this problem?

The XCarlink iPhone/iPod accessory for Mazda Bose autochangers is functioning differently after iOS 5.1. The Shuffle function no longer works and it plays Albums or Genius Playlisys only (not self-made playlists). Has anyone else experienced this problem?
Previously, the iPod function enabled one to see the track that was playing and control playback (such as repeat or shuffle) via the iPhone screen. Now all I see is an "Accessory Connected" message.

Somewhere in there, is there a question for us, your fellow users in these user to user support forums?

Shuffle function no longer works after upgrade.

After upgrading the software on my 3GS phone to 4.2.1 the shuffle function in the feature no longer worked. The same song played over and over again. The solution was super easy. On the home screen choose Settings > General > Reset > Reset All Settings. Unlike a restore none of your current data or media will be lost. Only took a couple of minutes. I had to set a few personal preference settings again like my ring tone and wallpaper, nothing major. Just a few taps and everything was back to normal. Hope this helps anyone having a problem after upgrading.

You could also tap the album artwork while the song is playing and turn repeat off.
http://manuals.info.apple.com/enUS/iPhone_iOS4_UserGuide.pdf

Control key no longer works after update.

After updating Lion the control key no longer works. It beeps when pressing control and then a number key but nothing happens.
This is left control key though. Right still works?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software -- potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions -- they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are four lines of text in monospaced type, which are UNIX shell commands. They’re harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of running these commands, search this site for other discussions in which they’ve been used without any report of ill effects.
Some of the commands will line-wrap in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
To begin, launch the Terminal application; e.g., by entering the first few letters of its name in a Spotlight search.
Step 1
Copy or drag -- do not type -- the line below into the Terminal window, then press return:
kextstat -kl | awk ' !/apple/ { print $6 $7 } '
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.)
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Step 3
launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
Step 4
ls -1A {,/}Library/{Ad,Compon,Ex,Fram,In,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Sta}* 2> /dev/null
Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, change it to something like “[email protected]” before posting.
Remember, this is all drag-and-drop or copy-and-paste, whichever you prefer -- no typing, except your password.
You can then quit Terminal.

Shuffle no longer works after upgrade

After upgrading to 7.3.1.3, the shuffle option no longer works. I uninstalled and re-installed, still nothing. Any thoughts?

You could also tap the album artwork while the song is playing and turn repeat off.
http://manuals.info.apple.com/enUS/iPhone_iOS4_UserGuide.pdf

Bluetooth tethering no longer working - iPhone 3GS (iOS4.1) and Macbook Pro

Hi all,
I don't understand why this is not working anymore. In the past I had successfully paired & used a bluetooth tethered connection between my Macbook Pro (OSX 10.6.4) & my iPhone 3GS (pre 4.1). The network connection was working and I was able to surf the web/use MSN etc. This is not a feature I have used in quite some time and for some reason now it is not working. I have done several upgrades on my phone since I last used it, currently on iOS 4.1.
Lets pretend I am starting from scratch and my Macbook & iPhone do not know each other, devices have been forgotten on both.
- iPhone & Macbook both are on & discoverable
- On Macbook Pro I select "Set Up Bluetooth Device"
- Macbook scans and detects my iPhone, I select "Continue"
- Macbook connects with iPhone & displays 6 digit pin, also pairing notification is shown on iPhone with the same 6 digit pin
- I select "Continue" on Macbook & "Pair" on iPhone
- Connection is made, iPhone is now listed on Macbook and vice versa
- From bluetooth menu (on Macbook) in the iPhone device menu I select "Connect to Network". Error is displayed on Macbook "The bluetooth network is unavailable. There was a problem connecting to your device..." & on my iPhone an error "Connection Unsuccessful. Make sure iPhone is turned on and in range".
- When I try to connect from the iPhone an error is displayed "Connection Unsuccessful. iPhone is not supported" with a button to Forget Device.
What... the ****?
This has worked in the past without a hitch. Has something changed between say iOS 3.x and 4.1 that might cause this to no longer work for me.
Any protips are greatly appreciated!

Don't feel like a noob, my settings changed after the last update without warning and I was having the same issue as you until I found your post that alerted me to the fact that my internet tethering might be off!
So for others out there that are having this issue to turn tethering on go to Settings > General > Network > Internet Tethering > On
Thank you!! I had already wasted over an hour repeatedly syncing and unsyncing my darn bluetooth connection.

Safari Javascript on iPad2 no longer works 8.2 and 8.3

Since updating myiPad2 to 8.2 and later 8.3, javascript elements in websites viewed with Safari and Chrome no longer work. I can successfully view/use these same websites on another iPad with an older IOS.
Here's what have tried so far:
-soft reset (home+power)
-clear safari cache/website data
-forget network
-toggle javascript on and off
-every combination of the above
-upgrade to 8.3 and repeat all of the above
Does anyone have anything to add that I could try?
Thank you.

@sean0826 -- this is why you don't use Java menus. Even javascript menus are a bad idea; you need to have a secondary menu system ANYTIME you have a menu system that requires a plugin or scripting to be active. NOT EVERYONE browses with that stuff on.
The only thing you can do for now is FTP to your site and add in static menus (like we did in the "old days" at the bottom of the page; or rip out the Java Menus and install static or CSS versions.
BTW where are you rmenus supposed to be. I have opera, safari, ff, and a few others. they all look the same. So if that's true, it's the plugin that's the problem, not safari.
In Opera Pogo.com works. java loads, the game is there. It does have some drawing issues but not surprised.
In Safair Pogo works fine. Just played a game of chess.

Batch printing using Applescript - no longer works

For several years I have been using a simple Applescript to monitor the contents of a folder, print new files then delete these files:
on adding folder items to this_folder after receiving added_items
repeat with each_item in added_items
tell application "AddPrinter" to open each_item
delay 30
tell application "Finder" to delete each_item
tell application "AddPrinter"
quit
end tell
end repeat
end adding folder items to
After the last Mavericks update it has stopped working and gives the error message "the document m3.txt could not be opened. AddPrinter cannot open files in the text format"
The same happens for PDF files - it seems that AddPrinter app has been changed and this functionality no longer works.
Is there some way to restore the previous AddPrinter functionality (I tried copying and using an old verison of the app, without success)?
Or is there another app that will work as intended?

I have found an alternative to the AddPrinter.app that sort of works in this Macscripter tip from 2004:
http://macscripter.net/viewtopic.php?id=9835
do shell script "/usr/bin/lp '"
calls up the Unix print command (LP = line printer!)
This enables me to print .txt, rtf, pdf and jpg files
Here is the new script:
on adding folder items to this_folder after receiving these_items
    try
        tell application "Finder"
            repeat with i from 1 to number of items in these_items
                try
                    set this_item to item i of these_items
                    set the path_string to this_item as string
                    set the final_path to POSIX path of the path_string
                    do shell script "/usr/bin/lp '" & final_path & "'"
                on error error_message
                end try
                delay 30
                tell application "Finder" to delete this_item
            end repeat
        end tell
    on error error_message
    end try
end adding folder items to
Now I just need to find out how to do some minor formatting such as font size and margins...
Now digging into the CUPS manual:
http://www.cups.org/doc-1.1/sum.html

Simple onRollOver code no longer works?

I'm really starting to hate AS3. I'm a basic user and I was
BASCIALLY just starting to get the hang of AS2 when Adobe had to go
start changing things with AS3.
grrrr...
so now:
mc.onRollOver = over
function over() {
this.gotoAndPlay(2)
No longer works. I'm being told that I need to
addEventListener('mouseOver',callback_handler)
I tried throwing that in (not fully understanding it) and now
the animation for my mc just plays repeatedly nonstop.
Help?

I have constructed a simple example below to try and help you
mate, ignore all the button building bit if you don't need it, it
is for the example only... Go through it and try and impliment into
your workings, to be honest, events in AS3 are easier than AS2,
just gotta get your head around it.
Simply attach you event listener to your mc, state the event
object type i.e mouse event, then property i.e. MOUSE_OVER, then
the event handler, the method with all the functionality to run on
mouse over...
Hope it helps,
Simon

HH3b no longer working as a repeater

Similar Messages

Maybe you are looking for