HH5 disconnecting the same time each night

Can anyone help me try to solve this issue, every night without fail my HH5 will disconnect around 6:45PM. This has been ongoing now for the last 4 nights and it's beginning to really annoy me. 
Here is a paste of the event log which may be of some help to someone who know's what they're doing:
http://pastebin.com/jgu8W0Qi
Any help would be greatly appreciated, thanks

There are numerous posts similar to yours on the forum. There was supposed to be a fix applied to hh5 last night
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Similar Messages

  • IMac wakes from sleep at the same time each night

    For some reason my iMac is waking from its 'sleep' mode at exactly 21:57 each night. Very odd, but any ideas why this is happening and at this particular time.
    It never used to?! I have not set any timer on it.
    Ideas appreciated. Thanks.

    Hi Barbara,
    I have nothing scheduled (thats why i don't get it??) and the only options I have 'checked' are the default options:
    Put the hard drive to sleep when possible (which i have tried unchecked too)Allow power button to put computer to sleep
    Automatically reduce brightness after power failure
    No schedules are set up.
    I could understand the blue tooth thing firing up the Mac from sleep mode, but it can't be this waking up at a set time each night of 21:57 ???
    Very strange and really frustrating.

  • HT4528 Hello.  I recently upgraded my iPhone 4 to ios7.  Since the upgrade, my phone turns itself off at the same time every night, for about 30 minutes.  I have no idea why.  Any suggestions?

    I recently upgrade to iOS 7, and since then, my iPhone turns off automatically at the same time every night for about 30.  Why does this happen, and what setting can I change to prevent it?

    Is Do Not Disturb turned on? Do you see a quarter-moon icon up top in the status bar?

  • Satellite P300-133 restart in the same time every night

    Hi to all
    I bought new laptop satelliate P300-133 two weeks ago, since 3 days ago the laptop always restart in the minight about 3 AM,
    does anyone have same problem like this?
    I do not think the problem from the machine,becasue the problem just came 3 days ago,maybe there has some thing worng about system set or someting
    pls give me some point if you can help me ,thanks

    Hi
    I doubt there is something wrong with your notebook.
    Is the notebook connected to LAN?
    If yes then the enabled Wake up on LAN option could be the reason why the notebook powers on itself
    So access the BIOS and disable this option;
    Furthermore I recommend disabling this in device manger -> LAN properties -> Advanced tab.
    Last but not least you should check if some Scheduled Tasks are not set which could power up the notebook as well
    Greetings

  • TS2755 keep receiving the same text message multiple times, at the same time of the night. How can I stop this?Thabnks

    Hi
    I keep on receiving the same text message multiple times and at around the same time each night. Any idea how I can stop this happening? The text messages are originating from to separate Saudi Arabian mobile numbers. Both these people are listed in my contacts so do you think if I delete their names it might stop the texts coming htrough each night?
    Cheers

    Deleting the people from your contacts will not stop the messages. Have you tried talking to the people and finding out if they're sending you messages? You could try contacting your carrier and finding out what blocking services they offer. However, theat would block all messages from those people.

  • How do I open the same ports on an Airport Extreme Base Station for multiple computers at the same time?

    As the title suggests...
    I have a mix of five Mac and PC's at home using an Airport Extreme Base Station as the router.   I need many ports opened on the AEBS for all of the computers- not just one computer.  (for example: three people want to play TF2 on Steam at the same time; each machine needs the correct ports open on the router).   Port forwarding  only allows me to forward a given port to a single IP, yet I need that port open for five differnt IP's, all at the same time. 
    How do I do that on an AEBS?
    In the same way, I have a small office of four iMacs using an old airport with the same exact issue.   I would like to be able to connect to all of them remotely with Apple Remote Desktop, but the port forwarding on the airport only allows a port to forward to a single IP.   I want to be able to tunnel into the office network and log onto any machine behind the Airport extreme... not just a single IP.    I currently have it set up where I can tunnel into the office from my house, I can find the one machine that the port forwarding has been assigned to, I can log on and everything is just fine... with one machine.    How do I open the firewall for the other machines? 
    TL,DR version:  How do you open ports on an Airport Extreme Base Station instead of forwarding ports?   Forwarding ports doesn't work for multiple IP's.  

    You can open a single or multiple ports to a single device or different ports to different devices, but you cannot open the same port to multiple devices via the AirPort Utility for the Apple routers.

  • How to display multiple reports at the same time

    Hi,
    I'm trying to display multiple reports at the same time, each one in separates tabs or windows using Forms 11g 11.1.1.6
    I have a button which has a call to a procedure which makes use of rp2rro library to show the specific reports, for example:
    call_report('report1');
    call_report('report2');
    call_report('report3');
    call_report('report4');
    The main problem is that, just the last report is been displayed.
    Is there some way to display report1, report2 etc in separate tabs or windows ??
    Regards
    Carlos

    You shouldn't have a problem calling different reports at once. As long as you're using Forms 11g they show up in different windows.
    The question is how you are calling the report.
    Here is how I manipulate it.
    After I pass parameters with the ADD_PARAMETER built-in I set some key values (destype, desformat, desname) with the RP2RRO's procedures.
    Finally calling RP2RRO.RP2RRO_RUN_PRODUCT and then WEB.SHOW_DOCUMENT passing the correct procedure parameters the report comes up in a window. If you repeat the above changing the appropriate variables (the report_name in the RP2RRO_RUN_PRODUCT and so on) you can get multiple reports in different windows.

  • Skype 7.3 crashing around same time every night

    Skype has been crashing every night, right before I go to bed Skype.exe ends up consuming almost 2GB of memory for some reason, at around the same time every night, and there are constant errors that Skype is out of memory, and it eventually stops responding completely until I end the process.
    Running Windows 7 64bit with the latest updates installed, and Skype 7.3 latest build. Screenshot attached.
    Attachments:
    2015-04-14 02-13-29.jpg ‏23 KB

    It really can't be any other software or hardware changes, as no changes have been made at all since the Skype update which caused this issue to start occuring.
    As this particular system and user account are locked down and used almost exclusively just for Skype by an elderly retired person who runs no other applications, and has made no other changes to the system within that time that Skype has been updated and this issue has started occuring.
    The Skype window remains open after they launch it in the morning, without minimizing it or using any other applications which could potentially interfere.
    Considering the user is an elderly person with limited computer knowledge, when this issue occurs they are unable to recover the system themselves from its non responsive state, requiring intervention by us fix it on a nightly basis which is less than ideal for us, and them.

  • Use GPIP for measure six point by six DMM at the same time

    First Question
    I will use GPIB for measure six point by six DMM at the same time. I will record the data in every mins.Could it avaiable? Is this method not accuray?
    I aslo wanna to run 3 labview programme at the same. time.Each programme is same and use GPIB to measure by 2 DMM and 2 Digital In .Could i do this?

    The first question is easily handled by triggering all instruments at the same time and then querying each in turn for the measured value. You can use eaither a hardware or software trigger (i.e. the gpib GET command). For your second question, are these 3 LabVIEW programs started by a single main program? How you want to run them will make a difference but in any case, the programs will have to have some sort of synchronization mechanism if you want measurements to be taken at the same time or if independent, a blocking mechanism to prevent simultaneous reads and writes. More details on the second question would help.

  • Disconnecting roughly at the same time every day.

    Hi
    I hope I have posted this in the right forum.
    I have a homehub 5 and I am currently on BT Infinity 2.
    Every day between 17:00-17:20 my router disconnects and reboots itself. I've noticed in the Boot section of the Hub's Event Log the words "Watchdog Reset". Is there a problem with my router?
    The disconnects happen whether I'm using the internet or not.
    Below is an small portion of the HH5 boot log.
    Time and date Message
    18:21:52, 11 Feb.
    ( 37.750000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
    18:21:32, 11 Feb.
    ( 18.040000) System start
    18:16:36, 10 Feb.
    ( 36.530000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
    18:16:17, 10 Feb.
    ( 17.700000) System start
    18:16:17, 10 Feb.
    ( 17.700000) Boot reason: watchdog reset
    18:05:55, 08 Feb.
    ( 38.090000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
    18:05:35, 08 Feb.
    ( 17.820000) System start
    18:00:35, 07 Feb.
    ( 36.460000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
    18:00:16, 07 Feb.
    ( 17.750000) System start
    17:55:09, 06 Feb.
    ( 36.290000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
    17:54:50, 06 Feb.
    ( 17.600000) System start
    17:49:22, 05 Feb.
    ( 36.900000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
    17:49:03, 05 Feb.
    ( 17.540000) System start
    17:43:40, 04 Feb.
    ( 37.050000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
    17:43:20, 04 Feb.
    ( 17.110000) System start
    17:38:10, 03 Feb.
    ( 37.450000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
    17:37:50, 03 Feb.
    ( 17.910000) System start
    17:32:59, 02 Feb.
    ( 34.710000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
    17:32:40, 02 Feb.
    ( 15.230000) System start
    Any ideas what is causing this and how I can fix it?
    I've also put router info at the end of this post.
    From
    Ian Brooks
    1. Product name:
    BT Home Hub
    2. Serial number:
    +068343+NQ41706425
    3. Firmware version:
    Software version 4.7.5.1.83.8.204 (Type A) Last updated 16/01/15
    4. Board version:
    BT Hub 5A
    5. DSL uptime:
    0 days, 02:43:45
    6. Data rate:
    20000 / 78563
    7. Maximum data rate:
    21879 / 78549
    8. Noise margin:
    6.3 / 6.6
    9. Line attenuation:
    9.7 / 10.8
    10. Signal attenuation:
    9.6 / 10.8
    11. Data sent/received:
    7.4 MB / 61.8 MB
    12. Broadband username:
    [email protected]
    13. BT Wi-fi:
    Yes
    14. 2.4 GHz Wireless network/SSID:
    BTHub5-X8C6
    15. 2.4 GHz Wireless connections:
    Enabled (802.11 b/g/n (up to 144 Mb/s))
    16. 2.4 GHz Wireless security:
    WPA2
    17. 2.4 GHz Wireless channel:
    Automatic (Smart Wireless)
    18. 5 GHz Wireless network/SSID:
    BTHub5-X8C6-5ghz
    19. 5 GHz Wireless connections:
    Enabled (802.11 a/n/ac (up to 1300 Mb/s))
    20. 5 GHz Wireless security:
    WPA2
    21. 5 GHz Wireless channel:
    Automatic (Smart Wireless)
    22. Firewall:
    Default
    23. MAC Address:
    40:f2:01:16:bf:e8
    24. Modulation:
    G.993.2 Annex B
    25. Software variant:
    AA
    26. Boot loader:
    1.0.0

    mr_maximus wrote:
    I dont have an answer for you unfortunately. But I am experiencing the same kind of problem. Maybe sharing this may help.
    Last week I noticed that my router was disconnecting every night at around 9:00pm. 
    Since last weekend it has changed its routine and now disconnects at around 11:00pm. I have also had the watchdog reset message in the log but only once.
    see my post https://community.bt.com/t5/BT-Infinity-Speed-Connection/Night-time-disconnections-and-watchdog-rese...
    Around the time of the disconnection, my hub also seems to go back by an hour, and then resets the time to the correct time after NTP sync. see below. Does yours do this?
    00:06:09, 11 Feb.
    ( 129.030000) NTP synchronization success!
    23:07:13, 10 Feb.
    ( 176.200000) CWMP: session completed successfully
    23:07:12, 10 Feb.
    ( 176.020000) CWMP: HTTP authentication success from https://pbthdm.bt.mo
    23:07:11, 10 Feb.
    ( 174.270000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
    23:07:11, 10 Feb.
    ( 174.260000) CWMP: Session start now. Event code(s): '4 VALUE CHANGE'
    23:07:10, 10 Feb.
    ( 173.890000) CWMP: Initializing transaction for event code 4 VALUE CHANGE
    23:06:34, 10 Feb.
    ( 137.410000) CWMP: session completed successfully
    23:06:34, 10 Feb.
    ( 137.230000) CWMP: HTTP authentication success from https://pbthdm.bt.mo
    00:05:56, 11 Feb.
    ( 116.150000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
    Also, do you see any of the CWMP messages like the one in my log, happening at around the same time?
    I suspect that these CWMP are somehow triggering the disconnections, and it has something to do with the last firmware update that happened mid-January.
    Someone suggested that I should perform a factory reset of the hub.
    I'm a little reluctant to do so as this turns the openwifi service back on as default, and in the past I have had problems restoring my backed up settings. as the saved config file was corrupted.
    I am considering giving the factory reset a go when I have some time at the weekend.  
    You may want to give it a go also.
    Yes, it seems I have the CWMP messages as well.
    I have just done a factory reset on my home hub 5 and will keep an eye on it over the next few days.
    Thanks for your reply.

  • If I have 2 tv's and each their own apple tv can I display the same program to them from my macbook at the same time?

    If I have 2 tv's and each their own apple tv can I display the same program to them from my macbook at the same time?
    for instance Keynote?

    Welcome to the Apple community.
    The Apple TV cannot display keynote presentations or websites from the computer. It can display them via mirroring from the iPad 2 or better or the iPhone 4S.
    You cannot AirPlay to 2 Apple TV 2's at the same time from an iOS device. You can watch the same video, TV show or listen to the same music from your iTunes library on multiple Apple TV's at the same time.

  • IS there a way to load and purchase different photos from iPhoto and ship them at the same time? the only way that I can find is to purchase each photo (or multiple of one) at a time, which increases the cost of shipping, as I want to get one print of 20

    Is there a way to order multiple different prints in any quantity from Iphoto? it appears currently like I would have to ship each separately, even if only one print... is there a way around this so I can can get several DIFFERENT prints of any quantity and ship all at the same time?

    Sure - easiest way is to make an album for photos you want to order and drag photos to it - when it is complete open the album, select all and order
    LN

  • Is there a way to "Quit" all running apps in dock at the same time verses right-clicking each one individually?

    Is there a way to "Quit" all running apps in dock at the same time verses right-clicking each one individually?

    IIRC, OPTION-click on the Apple icon on the menu bar and select either Restart or Shutdown. Alternatively,
    Control-Command-Eject
    Quit all applications (after giving you a chance to save changes to open documents), then restart the computer
    Control Option-Command-Eject
    Quit all applications (after giving you a chance to save changes to open documents), then shut down the computer

  • I have an iphone 4 how can I delete all my junk mail at the same time without having to selct each maessage

    How do i delete or empty all the messages in my junk email at the same time without having to mark each message?

    Not certain, but this can fix myriad Mail problems...
    Safe Boot from the HD, (holding Shift key down at bootup),  it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move this folder & file to the Desktop.
    Move this Folder to the Desktop...
    /Users/YourUserName/Library/Caches/Mail/
    Move this file to the Desktop...
    /Users/YourUserName/Library/Mail/Envelope Index
    Reboot.
    If that doesn't do it and you can afford to redo all your Rules, try these & reboot...
    /Users/YourUserName/Library/Mail/MessageRules.plist
    /Users/YourUserName/Library/Mail/MessageRules.plist.backup
    Note, in 10.5 & up /Users/YourUserName/Library/Caches/Mail/ may or may not exist.

  • After updating firefox today to 6.0, firefox is unable to load multiple tabs at the same time. When I try, firefox refuses to load any pages, and instead is stuck trying to connect to each page.

    After I updated firefox to 6.0 today firefox has developed a problem loading multiple tabs. When I try to load 10+ tabs, either at the same time or by opening each tab separately, each tab is stuck trying to connect to the desired page. This continues if I close all the tabs and try to load a single page, the single page is unable to get pass connecting. In order to load a new page when this situation arises I must close down firefox and start again, and the program has no history of the previous session.

    Other solutions
    * https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting#w_other-solutions
    Do a MALWARE check with these Malware Scanning programs. You need to scan with all programs because each program detects different malware. Make sure that you UPDATE each program to get the latest version of their databases before doing a scan.
    * Malwarebytes' Anti-Malware - http://www.malwarebytes.org/mbam.php
    * SuperAntispyware - http://www.superantispyware.com/
    * Windows Defender Home Page -
    http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
    * Spybot Search & Destroy - http://www.safer-networking.org/en/index.html
    * Ad-Aware Free - http://www.lavasoft.com/products/ad_aware_free.php
    There are also specialized forums for Malware Removal such as those listed below, where you might be able to get more help:
    * Bleeping Computer Forums - http://www.bleepingcomputer.com/forums/
    * Spyware Warrior Forums - http://www.spywarewarrior.com/index.php
    * SWI Forums - http://www.spywareinfoforum.com/
    Check and tell if its working.

Maybe you are looking for