HH5 dropping connection - new firmware version

Does anyone know the version number of the new firmware for HH5 that's meant to fix this issue so I can establish if I'm running it or not?
My HH5 says the folowing:
BT Home Hub 5 (Type A) | Software version 4.7.5.1.83.8.204 | Last updated Unknown
The fact the last update is unknown suggests to me that it hasn't updated recently, but I may be wrong about that.
There's a BT.com page that lists the "latest versions", but it appears well out of date and quotes 4.7.5.1.83.8.173.1.6
My broadband service was only connected on February 16 and worked properly for just eight hours before starting the three-minute or so drop-connection-and-reboot cycle it's been on ever since.
After 15 years trouble-free cable broadband access with Virgin at my old address, you can imagine I'm not impressed.

I did a factory reset at about 12:30.
Current helpdesk info is:
1. Product name: BT Home Hub
2. Serial number: +068543+NQ45019093
3. Firmware version: Software version 4.7.5.1.83.8.204 (Type A) Last updated Unknown
4. Board version: BT Hub 5A
5. DSL uptime: -
6. Data rate: -
7. Maximum data rate: -
8. Noise margin: -
9. Line attenuation: -
10. Signal attenuation: -
11. Data sent/received: -
12. Broadband username: [email protected]
13. BT Wi-fi: No
14. 2.4 GHz Wireless network/SSID: BTHub5-HKH3
15. 2.4 GHz Wireless connections: Disabled
16. 2.4 GHz Wireless security: WPA2
17. 2.4 GHz Wireless channel: Automatic (Smart Wireless)
18. 5 GHz Wireless network/SSID: BTHub5-HKH3
19. 5 GHz Wireless connections: Disabled 20. 5 GHz Wireless security: WPA2
21. 5 GHz Wireless channel: Automatic (Smart Wireless)
22. Firewall: Default
23. MAC Address: 18:1e:78:2a:5b:cc
24. VPI/VCI: 0 / 38
25. Modulation: -
26. Latency type: -
27. Software variant: AA
28. Boot loader: 1.0.0

Similar Messages

Nokia N80 new firmware version 4.0707.0.7

It's so bad firmware version!
I have lots of problems with new firmware version 4.0707.0.7 that I haven't with past version 4.0623.0.42 !
I can't understand what's going on with NOKIA Software Updater!
>I can't enter to my "Gallery\Images & Video" from "Camera Mode"
>My OS speed decrease
>Captured photos don't show in "Images & Video" until I restart my N80
>For each new files you add, you need to restart your N80 until your N80 find them in memory!!!
Why past version haven't these PROBLEMS and new version have them!!!
Does anybody know how can I return to my past firmware version (mean 4.0623.0.42) ? Is it possible?Message Edited by zoologist1 on 03-May-200712:28 PM

04-May-200710:53 PM
djassa1 wrote:
Basically it means that BB5 phones like N-Series including N80 and E-series cannot be downgraded to a previous version once they have been upgraded. Trying that with third party tools, because it's not possible through NSU, will brick (dead) your phone, period.
That's why I said you'd have to take the phone to a service center.

New firmware version is out for Megastick 128

There is a new firmware version (2.05) for the Megastick 1 (128). Get it from Megastick 1 firmware page

I upgraded it and didn’t see any major differences. However now there are many volume steps. Apart from that I noticed that when the radio is not tuned to a proper channel there is no noise, not a useful thing but those are the only differences I saw. Still cant record in 44k (records in 22k format). Anyone tried it and saw anything different ?
One other thing, I don’t know whether this existed in earlier firmware versions, when you have a normal file which is not an MP3 file with the .mp3 extension you cant turn it on. I came across this when I tried putting several non MP3 files (ogg ) having the mp3 extension after .ogg didn’t work to see whether they have added support for new standards (Slim chance but who knows… )

New Firmware version

The new firmware version it's ok for my apple tv 2 too?
At the moment i have the 6.2.1 version.
Thanks

It seems that only the Apple TV 3 will update to Apple TV software version 7 (iOS 8).

N93 no new firmware version available

Hi,
I'm a brand new discussion board user.
I' bought my N93 thre months ago. My phone ID is 0531236 and my firmware version is 11.0.034.
I've bought also a bluetooth headset BH-900 but it does not work. I've found in this board that there is a new firmware version (20.0...)
that seems to fix the problem. If I try to update my phone via PC application I receive "no new firmware available" as answer.
Any problems with my phone and firmware version?
Thanx in advance for any replies
-- gigi

Well, my GE 31591GE1 keeps working just fine although still shows that message about available update. Anybody running firmware version 22.3 that would like to comment on this?

GE 31591GE1: new firmware version available (v22.3...

Hi! There is a new firmware version available for my GE 31591GE1 (version 22.37). I'm currently running ver. 14.37 but before upgrading it I wanted to ask if anybody had upgraded to the new version and if there were any noticeable benefits or drawbacks.

Well, my GE 31591GE1 keeps working just fine although still shows that message about available update. Anybody running firmware version 22.3 that would like to comment on this?

Nokia N96 New Firmware Version 30.033 and Camera F...

I updated my Nokia N96 to the new firmware version 30.033 after which my phone camera is not working. When I press on the camera button it gives the message (Camera Feature not Supported). I played many tricks with it but of no use. I reset my phone to the original factory setting through (*#7370#) and Multi-finger process but of no help. I even reinstalled the updated version but the problem still persists. My camera worked fine before the update but now it gives the said message and the phone hanges up on pressing the camera button. I request nokia developers to help fix this problem and check their updates for buge before uploading them to the server to save users from problems & worries. If you found any solution for the problem then please let me know it on my E-Mail ID: I will be grateful for your response.
Message Edited by Kay_Cee on 12-Jan-2010 03:40 AM

hlepcha wrote:
Kay_Cee
You told everything about the firmware upgrades and the non-functional camera features.
I did everything [firmware re-installation, hard-reset etc. etc.] to get my camera features back. This includes visiting the authorized Nokia service centre and paying them bucks.
No luck buddy. I may have an ardent brand loyalty to Nokia but Nokia is letting me down every way.
Any luck buddy?
you should not have had to pay a nokia care point for what ammounts to a warenty repair,
The camera issue with the N96 upgrade is an uncommon but known bug,
If a hard reset, or a firmware reinstall doesn't fix it then take the phone to a nokia care point and have them fix it for free under the warenty

WAP321 Dropping Connection since firmware Upgrade

MyWAP321 is dropping connections at least once a day since upgradiing to firmware 1.0.1.10. before the upgrade I had no problems and I have another WAP321 with firmware 1.0.0.3 that never drops connection. Is anybody else having this problem since upgrading?

Hi ,
Ive just installed this WAP 321 wiht Radius server authentication.
I have the firmware version 1.0.2.3 and this WAP is now having Connection dropout and dosent connect again.
I have to do re try for several times and again it starts working.
Please see the log and advice me what is happeing inside it and why this connection is not staying persistent with the associated wireless clients.
Jun 9 2013 20:07:25
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 02:04:36
debug
clusterd[1114]
dman sent notification that config has changed
Jun 9 2013 02:04:36
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 02:04:35
debug
clusterd[1114]
dman sent notification that config has changed
Jun 9 2013 02:04:35
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 02:04:17
debug
clusterd[1114]
dman sent notification that config has changed
Jun 9 2013 02:04:17
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 02:04:16
debug
clusterd[1114]
dman sent notification that config has changed
Jun 9 2013 02:04:16
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 02:00:56
debug
clusterd[1114]
dman sent notification that config has changed
Jun 9 2013 02:00:56
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 02:00:53
debug
clusterd[1114]
dman sent notification that config has changed
Jun 9 2013 02:00:53
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 02:00:52
debug
clusterd[1114]
dman sent notification that config has changed
Jun 9 2013 02:00:52
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 02:00:52
debug
clusterd[1114]
dman sent notification that config has changed
Jun 9 2013 02:00:52
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 01:59:22
info
hostapd[1241]
authenticated - identity '' EAP type: 25 (PEAP)
Jun 9 2013 01:59:22
info
hostapd[1241]
The wireless client with MAC address 8c:70:5a:47:b9:ac has been successfully authenticated.
Jun 9 2013 01:59:22
info
hostapd[1241]
wlan0: WPA STA 8c:70:5a:47:b9:ac pairwise key exchange completed (WPAv2)
Jun 9 2013 01:59:22
info
hostapd[1241]
EAP authentication with the authentication server completed
Jun 9 2013 01:59:22
info
hostapd[1241]
wlan0: IEEE 802.11 STA 8c:70:5a:47:b9:ac associated with BSSID d8:67:d9:d1:e9:20
Jun 9 2013 01:59:22
info
hostapd[1241]
wlan0: IEEE 802.11 Assoc request from 8c:70:5a:47:b9:ac BSSID d8:67:d9:d1:e9:20 SSID ADRJSLEDFIWMDWOQFDFPE
Jun 9 2013 01:59:21
debug
clusterd[1114]
dman sent notification that config has changed
Jun 9 2013 01:59:21
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 01:59:20
debug
clusterd[1114]
dman sent notification that config has changed
Jun 9 2013 01:59:20
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 01:59:18
debug
clusterd[1114]
dman sent notification that config has changed
Jun 9 2013 01:59:18
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 01:57:27
info
hostapd[1106]
authenticated - identity '' EAP type: 25 (PEAP)
Jun 9 2013 01:57:27
info
hostapd[1106]
The wireless client with MAC address 8c:70:5a:47:b9:ac has been successfully authenticated.
Jun 9 2013 01:57:27
info
hostapd[1106]
wlan0: WPA STA 8c:70:5a:47:b9:ac pairwise key exchange completed (WPAv2)
Jun 9 2013 01:57:27
info
hostapd[1106]
EAP authentication with the authentication server completed
Jun 9 2013 01:57:27
info
hostapd[1106]
wlan0: IEEE 802.11 STA 8c:70:5a:47:b9:ac associated with BSSID d8:67:d9:d1:e9:20
Jun 9 2013 01:57:27
info
hostapd[1106]
wlan0: IEEE 802.11 Assoc request from 8c:70:5a:47:b9:ac BSSID d8:67:d9:d1:e9:20 SSID ADRJSLEDFIWMDWOQFDFPE
Jun 9 2013 01:57:27
info
hostapd[1106]
wlan0: IEEE 802.11 STA 8c:70:5a:47:b9:ac deauthed from BSSID d8:67:d9:d1:e9:20 reason 3: STA is leaving IBSS or ESS
Jun 9 2013 01:57:27
info
hostapd[1106]
wlan0: IEEE 802.11 Assoc request from 8c:70:5a:47:b9:ac BSSID d8:67:d9:d1:e9:20 SSID ADRJSLEDFIWMDWOQFDFPE
Jun 9 2013 01:57:27
info
hostapd[1106]
wlan0: IEEE 802.11 STA 8c:70:5a:47:b9:ac deauthed from BSSID d8:67:d9:d1:e9:20 reason 3: STA is leaving IBSS or ESS
Jun 9 2013 01:55:39
info
hostapd[1106]
wlan0: IEEE 802.11 Assoc request from 68:09:27:a0:0c:6e BSSID d8:67:d9:d1:e9:20 SSID ADRJSLEDFIWMDWOQFDFPE
Jun 9 2013 01:55:39
info
hostapd[1106]
wlan0: IEEE 802.11 STA 68:09:27:a0:0c:6e deauthed from BSSID d8:67:d9:d1:e9:20 reason 3: STA is leaving IBSS or ESS
Jun 9 2013 01:55:39
info
hostapd[1106]
wlan0: IEEE 802.11 Assoc request from 68:09:27:a0:0c:6e BSSID d8:67:d9:d1:e9:20 SSID ADRJSLEDFIWMDWOQFDFPE
Jun 9 2013 01:55:39
info
hostapd[1106]
wlan0: IEEE 802.11 STA 68:09:27:a0:0c:6e deauthed from BSSID d8:67:d9:d1:e9:20 reason 3: STA is leaving IBSS or ESS
Jun 9 2013 01:55:38
info
hostapd[1106]
wlan0: IEEE 802.11 Assoc request from 68:09:27:a0:0c:6e BSSID d8:67:d9:d1:e9:20 SSID ADRJSLEDFIWMDWOQFDFPE
Jun 9 2013 01:55:38
info
hostapd[1106]
wlan0: IEEE 802.11 STA 68:09:27:a0:0c:6e deauthed from BSSID d8:67:d9:d1:e9:20 reason 3: STA is leaving IBSS or ESS
Jun 9 2013 01:55:38
info
hostapd[1106]
wlan0: IEEE 802.11 Assoc request from 68:09:27:a0:0c:6e BSSID d8:67:d9:d1:e9:20 SSID ADRJSLEDFIWMDWOQFDFPE
Jun 9 2013 01:55:38
info
hostapd[1106]
wlan0: IEEE 802.11 STA 68:09:27:a0:0c:6e deauthed from BSSID d8:67:d9:d1:e9:20 reason 3: STA is leaving IBSS or ESS

Viewing video stream still drops connection with firmware 1.52.06

I have a BEFW11S4 (V.4) and installed a new firmware (1.52.06). I still lose internet connection after viewing a streaming video -- such as msn.com. I have viewed other postings on the internet and it appears that there are issues with Linksys firmware. Many say don't upgrade if you want to avoid the "streaming video bug." It appears that firmware 1.50.14 is the most stable. Unfortunately, the current firmware is 1.52.02. This is strange because a few months ago I downloaded the 1.52.06. Anyway, does anyone know where I can get the 1.50.14 version? I emailed Linksys tech support several times and the conclusion they gave me is that my router is defective. I don't believe this because the streaming video problem occurred right after I installed the 1.52.06 firmware, which strangely is unavailable on the website.
Thanks.
Ty

I tried using the methods to determine the correct MTU size as listed on the linksys site they didn't work for me.
Using the format, ping -f -l [MTU SIZE] yahoo.com ,worked but the result (adding 28 to that number) the linksys would not accept.
I finally just tried changing numbers then viewing a streaming video site. and found 1472 worked okay for me. using the current software 1.52.06

Nokia N79 will be geting new firmware Version v30....

Hi,
Nokia N79 will get new updated firmware Version v30.101 soon.
*lot of bugs fixed
*perfomance update...etc.
Solved!
Go to Solution.

Hi,
I connected my N79 yesterday on my PC with Nokia OVI.
It tells me that there was a firmware update and launched it.
But during this update, It tells me there was a USB connection problem and launched again the update......during 20 minutes to tell me finaly that there was again a problem.
So, now, I can't start my phone. When I push the power button, the screen lights on few seconds and stop.
I tried to to a hard reset (format) with the three buttons :
1/ 3 + * + green button
2/ Start button with the three button pushed
....but nothing hapens.
When I try to charge the phone, nothing hapens.
Thanks for yopur help.
Message Edited by kobayashi on 28-Oct-2009 03:38 PM
Nokia N8 RM-596 (SFR)
Code produit : 0599819
PR1.2
Version du logiciel : 014.002
Nokia MicroSD 16Go.

5310 new firmware version 08.23!

I bought a Nokia 5310 the other day. it had the 5.81 or so firmware on it. Knowing from the boards that 7.01 was available, I immediately upgraded, and to my surprise found that 08.23 was available.
This new firmware hasn't received any discussion or announcement, so I wanted to point out its existance... The date stamp when using *#0000# is 23/7/2008.
Those who can, may also reply to say what differences they found. ;-)
cheers
My Nokia history: 5310 (Sep 2008), 5300 (Jan 2007), 6610 (June 2003), 3310 (2001)

I am a little disappointed by this new update. I previously had the 5.xx firmware version. Some things have been changed, and not necessarily in a good way. The default screensaver has been changed, and it's pretty lame and boring. The default screensaver that I had before the update was really cool, and lots of my friends liked it a lot.
The font size in the music player has been chaged also, it's a little bigger.
Another thing that I have noticed since the update and bothers me (and it's just a personal opinion, maybe it's not a general issue), it's this: in whicever menu I am (excepting the standby screen), the colors are a little dim, the brightness is a little pale, it's like the background color is a little foggy. Before the update, the colors were real good and strong, in whichever menu in the phone I was. But now are a little pale and foggy, which is really disturbing for me.
That is what I noticed in the first hour since the update.
So for now, thumb down for Nokia!
P.S. I also agree that when a new version is released, there also should be some release notes, so we know what to expect.

NEW Firmware Version 6.01

All,
We are releasing version 6.01 firmware for the F5, and F55 motion picture cameras. Thank you for your feedback in discovering the S/Q, Center Scan issue.
When S&Q setting was set “On” in 2K Center Scan mode or 2K Full Scan mode and the power was turned Off and On, Recording did not work. This update fixes it.
This update includes all other features and functionality as posted in the previous version 6.0 announcement
http://www.community.sony.com/t5/F5-F55/NEW-Version-6-Firmware-F5-and-F55/m-p/506807#M28137
PMW-F55/F5 Firmware Version V6.01 Release note
June 30th, 2015
This document explains about firmware update of PMW-F55 V6.01 from PMW-F55/F5 V6.00. The latest firmware version of related products is below.
Product name
Latest firmware
Release date
PMW-F55
V6.01
This announcement
PMW-F5
V6.01
This announcement
AXS-R5
V4.1
Aug 8th, 2014
AXS-512S24
V1.2
June 5th, 2013
AXS-A512S24/A1TS24
V1.0
Mar 17th, 2014
AXS-A256S24
V2.0
Mar 26th, 2015
AXS Utility Software
V1.3
Feb 28th, 2014
RAW Viewer
V2.2
Feb, 28th, 2014
This firmware can be updated from V6.00, V5.11, V5.10, V5.0, V4.12, V4.11, V4.1, V4.0, V3.0, V2.11, V2.1 and V2.0. When you want to update F55 and F5 from V1.22 and earlier, you must update to V2.0 first. https://community.sony.com/t5/F5-F55/NEW-Firmware-release-Version-2-0/m-p/195623#M6582
Regarding the procedure and functions about V2.0, please refer to “PMW-F55/F5 Firmware Version V2.0 Release note” which was released on Oct 4th, 2013. And F55 and F5 must not be downgraded to previous versions after updating to V2.11. We couldn’t guarantee any troubles after downgrading. An “All File” generated by a previous firmware version can be loaded to V6.01 of F55 and F5.
NOTE:
The new Firmware V6.01 for PMW-F55/F5 is only compatible with AXS-R5 running with Firmware V4.1. If your AXS-R5 has installed an older version, please update to the current Firmware V4.1 the same time. https://community.sony.com/t5/F5-F55/NEW-F5-F55-Firmware-Version-v4-11-and-AXS-R5-v4-1/m-p/410782#M19813
<<Modification from V6.00 of F55 and F5>>
Bug Fix
When S&Q setting was set “On” in 2K Center Scan mode or 2K Full Scan mode and the power was turned Off and On, Recording did not work. This has been fixed.
Sometimes specific All Files could not be loaded. This has been fixed.
<Notification we would like to share>
iOS setting for Wi-Fi Remote
While using Wi-Fi Remote by iOS devices and Safari, please turn off Private browse function.
All file Support
All files which are created with Firmware V6.01 are not compatible with an earlier firmware version.
<< Version up procedure >>
Please refer to “Version Up Guide for PMW-F55 and F5” - documents are below for download
Firmware download:
F5
http://pro.sony.com/bbsccms/assets/files/show/highend/downloads/PMW-F5_V601_6.01_4_2015-06-24_14-42-14_firmware.zip
F55
http://pro.sony.com/bbsccms/assets/files/show/highend/downloads/PMW-F55_V601_6.01_5_2015-06-24_14-42-07_firmware.zip

Hi, AlexK. I just found the answer for your question in F5/F55 user manual(v.6), on p. 46.In a word, you can't use your double speed viewfinder function.Refer to the last sentence. Viewfinder Double Speed function is not effective on the following settings.- When System Frequency is 59.94/50.- When Recording format is SStP Sr-SQ 444 / SStP SR-SQ Lite 422 / SStP SR-SQ 422, ProRes 422, DNxHD 220x / DNxHD 145.- When "Setting" in "Slow Shutter" of the Camera menu is set to "On."- When "Setting" in "S&Q Motion" of the Camera menu is set to "On," and the "Frame Rate" setting is 1 to 60P. At this moment, it's not available to everyone.Hope Sony make it available with future firmware update, if technically possible. Bryan

Problems in new firmware version of nokia 5800 xm

1. display goes dull...... 2. in music player there is no find option, so i have to find a song from 8000 songs.....it takes long time to search a perticular song. 3. maps are not displaying as before..(in version 31 ) so i request to nokia to release the new version of firmware of nokia 5800xm as soon as possible.else release version 31 as it was again..... desperately waiting for new firmware...........

What version are you using? v50?
1. Display goes dull because of power saving. You can set the time to how many seconds later does the display go dull
2. There is no find option, but there is a search app in the internet menu (it searches phone contents as well)
3. Maps not displaying means the maps data on your card is not compatible with maps version.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Is the new Firmware version of 5800 supports VoIP?

I want just want to ask for those whoe already updated their 5800 to version 40 firmware if their phone already supports VoIP. I've read on some forums that Nokia 5800 doesn't support VoIP. Is the new update already have like the VoIP support of N97?

mj_monserrat wrote:
I want just want to ask for those whoe already updated their 5800 to version 40 firmware if their phone already supports VoIP. I've read on some forums that Nokia 5800 doesn't support VoIP. Is the new update already have like the VoIP support of N97?
No, it's voip capabilities are exactly the same as previous firmware versions so it still does not support true native voip like the N97 does.
The 5800 is highly unlikely to ever receive this feature. As before you will need to use a program such as fring or nimbuzz for voip on the 5800.

New Firmware Version 1.0.5.1.00 released for EOS C500 & C500PL Cinema Cameras

New EOS C500 & C500 PL Firmware Version 1.0.5.1.00 offers numerous improvements to functionality including compatibility with the Canon RC-V100 Remote Controller. Learn more about this Firmware update and download the update.

Hi, AlexK. I just found the answer for your question in F5/F55 user manual(v.6), on p. 46.In a word, you can't use your double speed viewfinder function.Refer to the last sentence. Viewfinder Double Speed function is not effective on the following settings.- When System Frequency is 59.94/50.- When Recording format is SStP Sr-SQ 444 / SStP SR-SQ Lite 422 / SStP SR-SQ 422, ProRes 422, DNxHD 220x / DNxHD 145.- When "Setting" in "Slow Shutter" of the Camera menu is set to "On."- When "Setting" in "S&Q Motion" of the Camera menu is set to "On," and the "Frame Rate" setting is 1 to 60P. At this moment, it's not available to everyone.Hope Sony make it available with future firmware update, if technically possible. Bryan

HH5 dropping connection - new firmware version

Similar Messages

Maybe you are looking for