Hi 2 every 1.. i had ipodtouch 1st generation of 3.1.3 version.. can any 1 send apps tat suite diz version.. tq

hi 2 every 1.. i had ipodtouch 1st generation of 3.1.3 version.. can any 1 send apps tat suite diz version.. tq

iOSSearch - search the iTunes store for compatible apps.
Vintapps 3.1.3 - paid app.
Apple Club - filter apps by iOS version.

Similar Messages

  • I have a iPodtouch 4 generation and the screen is cracked can I fix it

    I have a iPodtouch 4 generation and the screen is cracked can I fix it

    Yes. There are repair shops that will do it. There are places that sell repair kits that you can install. Apple also has a replacement service.
      iPods: replacement and battery costs

  • My Mavericks upgrade crashed my hard drive and I had to reinstall Mountain Lion.  Now I cannot get any of the apps that I purchased to download.  The icons on the launchpad just say "waiting" no matter what I try.

    My Mavericks upgrade crashed my hard drive and I had to reinstall Mountain Lion.  Now I cannot get any of the apps that I purchased to download.  The icons on the launchpad just say "waiting" no matter what I try.  My app store ID is fine.  What do I do?

    Are you now using a different username from the one you used prior to migrating? If so that is the reason for the problem. You might, then, give this a try:
    To fix Home folder permissions
    Open the Terminal application in the Utilities folder.  At the command line prompt enter or paste the following command line:
    sudo chown -R `id -un`:`id -gn` ~
    Press RETURN.  You will be prompted to enter your admin password which will not be echoed.

  • TS1702 I have just tried to install Anthill to my iPod touch Gen 4. I get a message "Anthill failed to install" on the iPod. I already had Anthill Free installed so deleted it. I can install other free apps but not Anthill Free. Have tried the 7 steps. An

    I have just tried to install the full version of Anthill to my iPod touch Gen 4.  I get a message on the iPod saying "Anthill failed to install" and an error on the computer "OxE8000004".  I already had Anthill Free installed so deleted it in case it was interferring with the new download.  I can install other free apps but now can't even install Anthill Free.  I have tried the 7 resolution steps advised by Apple and have totally run out of ideas as to what I can try next.  I am using a new laptop since installing Anthill Free the first time and am now running Windows 7, otherwise everything else is the same.  Any help would be sincerely appreciated.  Thanks.

    - Maybe here:
    iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting
    - Try redownloading the app directly to the iPod by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Original itouch (1st generation) needs to update to be able to add new apps

    My daughter has the original itouch. It is the MA623LL with version 2.2.1 (5H11) installed. She said she cannot continue to add apps from itunes. It continually tells her to update. The itunes on our computer is updated to version 9.2.0.61 itunes 9. It tells her to update to iphone 3.0 software update. Does anyone know how I would go about doing this and if this is a software download I need to purchase.

    awaddell wrote:
    My daughter has the original itouch. It is the MA623LL with version 2.2.1 (5H11) installed. She said she cannot continue to add apps from itunes. It continually tells her to update. The itunes on our computer is updated to version 9.2.0.61 itunes 9. It tells her to update to iphone 3.0 software update. Does anyone know how I would go about doing this and if this is a software download I need to purchase.
    As others have said, the 1st generation iPod Touch can take OS 3. My 1st Generation device actually has OS 3.1.3 on it. Regretfully, this device is not compatible with iOS 4, so there will be new software updates/releases that I can not install because they require iOS 4, but the device still works...

  • The replacement shipment of my iPod 1st generation did not arrive and I can not trace the shipment. Who can I contact?

    I received an email that the replacement of my IPOD NANO was shipped. It was supposde to arrive at my address in France within two working days. Now, we are 4 weeks later and the shipment has still not arrived. There is a tracking number in the email but it does not have a link. I do not know which express delivery service is supposed to deliver. How can I verify the shipment? Who can I contact for help to track the delivery or resend the replacement product?

    Thanks for the advice. I contacted the expresslane service and have to admit that it works very well. They call you back immediately! I have contacted them already three times: unfortunately, the first person gave me a wrong tracking information, the second person was "technical" and asked me to call during business hours. Number 3 was helpful and told me that the shipping by French postal service might take 5-6 weeks (and not the 2 days as announced in the e-mail I had received). So, I still have to wait and contact them again if the replacement iPod does not arrive in the coming days ... We will see!

  • I've got an iPad  (1st generation) it works perfectly but i can't update it, can i do something with it?

    Is there any possibility of changing it at a store or something?

    You can sell it. You won't get it that much for it at this point, but if you really want to upgrade, you can try sites like gazelle.com, cashforyourmac.com, sellyourmac.com, etc. Amazon, Walmart, Best Buy might also take original ipads, but they'll give you a gift card instead of cash. Google 'where to sell ipad' and you'll get many suggestions.
    If money is a concern and you do sell your ipad to upgrade, you might try the Apple online certified refurbished store. All of their ipads have brand new front and back covers, a brand new battery, and a full one year warranty including 90 days of free phone support. Shipping is free in the refurb store. I don't think any other place gives you all that when you buy a used ipad.
    Please note if you do sell it, be sure to back up all of your data with itunes before you restore it to factory settings. Please read this - http://support.apple.com/kb/ht1414
    Hope this helps.

  • 1st Generation iPod Touch No Longer Recognized by Windows 7 PC

    I have a 1st generation iPod Touch (no camera) that can no longer connect to my Windows 7 pc. Plugging in the iPod via USB does not trigger any sort of dialog box in Windows and it doesn't trigger a message saying a device has been connected; the iPod does not show up in either iTunes, Computer, Device Manager or Devices and Printers, either as an Apple mobile device or an unrecognized device, and does not charge when connected to USB (though the wall-charger still works). As far as my computer is concerned this iPod does not exist. I had successfully synced this iPod as recently as one week ago and am ready to pitch the thing in the garbage if I can't find a solution.
    I have the latest version of iTunes as well as the most up-to-date Windows updates. I have already followed all the steps listed here (iOS: Device not recognized in iTunes for Windows) multiple times with no success.
    I also have tried following the instructions listed here (Re: For those Windows users who suddenly cannot see their device in iTunes. Here's a solution that has worked.) but this also hasn't worked since the iPod isn't recognized in the Device Manager and I am not given the option of updating the drivers, manually or otherwise.
    I have uninstalled/re-installed iTunes and all related Apple services multiple times. The Apple Mobile Device Service is functioning normally. iTunes diagnostics indicate that there is no device connected no matter what I do. I have reinstalled my Windows USB drivers and changed the settings on the USB Root Hub in the Windows Device Manager to disable power saving options.
    I have tried connecting the device to another PC which detects and syncs another apple device (iPhone 5) with no issues, and had the exact same result: the computer doesn't even recognize an iPod is connected.
    I can't update the Apple Mobile Device Drivers because the device is not recognized by my machine in any way.
    I even completely reset my iPod and that just left me with a unactivated iPod that still isn't detected.
    I am really unbelievably fed-up with the useless "try checking your USB cable"-style advice that people seem to offer on this forum. If anybody has dealt with this issue and has any serious advice other than "re-install iTunes," it would be much appreciated.

    You said "I am really unbelievably fed-up with the useless "try checking your USB cable"-style"
    - Did you try another cable?
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    Try on another computer

  • Why my 1st generation nano earbuds not working with 6th generation nano?

    Hi there,
    I had a 1st generation iPod Nano and Apple just replaced it with a 6th generation nano, however the earbuds jack of my 1st gen does not fit all the way into the 6th gen, it leaves a tiny bit outside and I couldn't push it all the way in, though I could hear sounds through the earbuds.  Is there anyone out there that experience this?  I thought the earbuds connector is universal.
    Also, I'm not sure if this is related to the earbuds not fitting all the way in.  My new Nano shuts itself off about 1 minute or 2 after I turn it on, I am thinking it may think there is no earbuds connected to it, could this be why?
    Thanks for any help!
    Ray.

    Push harder, the headphone jack on the 6 is very tight when new.

  • 1st Generation Ipod Touch Fall

    Hi guys
    I have had a 1st generation Ipod touch for 2 years and still use it pretty much everyday. Unfortunately I dropped it onto a hard floor today for the first time. I was kneeling over and it dropped out of my shirt pocket onto the aluminium back without damaging the screen of even scratching it in any way. Thing is it wont turn on at all now. Im sure its charged as I was using it shortly before the fall. Im at work so cant connect it to itunes yet. Any ideas about what could have gone wrong and how to fix it?

    That symptom is one of those covered here:
    iPod touch: Hardware troubleshooting

  • 1st generation vs. 3rd generation Ipad and Cable TV Viewing app.

    I recently had the opportunity to borrow a 3rd generation ipad from work.  I brought it home and loaded the optimum online app. from my cable company that allows you to watch cable anywhere you are within range of your home WIFI supplied by them.
    I was really surprised when I was able to take the ipad out back to the furthest most point of our property, where a summer screen house is set up,
    and although the signal from my Netgear WNR834B v2 router was hovering around 1 or 2 signal strength on the iPad3, the quality of the TV signal being streamed did not waver at all.  The picture was absolutely pristine (after a few seconds) and there were absolutely no drop outs of the streaming video.  Again, THIS with absolute minimum signal strength.
    I had to return the device to work, but picked up a used 1st generation iPad on ebay, and loaded the same optimum online app. onto it.  On the 1st generation device, the signal was both visually fuzzier (at that furthest point in the backyard) and had freezes and breaks in the streaming video at that same furthest point outside at the edge of the property.  It works great inside near the router or in most points in the house and is pristine.
    My first question...did they updgrade some technology between the 1st and 3rd generation iPads that would account for the difference in the way the weak signal drops out on the 1st generartion device, but did not on the 3rd generation ipad?  Or could that be the app itself somehow making use of the upgraded technology between the two generation of devices?
    My second question....I'm trying to figure out how to boost and extend the WIFI signal to that furthest point in the backyard, which is several hundred feet away from the house.  An Airport Extreme doesn't seem to provide that distance level of extention, unless I bought two, but that would require one of them being outside to cover the distance I'm trying to get to.  I'm contemplating purchasing an Amped Wireless Repeater and range Extender that advertises 10,000 square feet extention, but the reviews on the device are mixed.
    Any input would be appreciated.

    The major difference between the two versions is that Generation 2 and higher products allow simultaneous dual band wireless operation.
    Your Time Capsule will produce either a 5 GHz or 2.4 GHz network, but not both simultaneously. Since you have iPhones connecting to the network, you are using the 2.4 GHz band.
    Most of your newer devices are capable of connecting at the much faster 5 GHz speeds, but if you set your current Time Capsule up to operate at 5 GHz, the iPhones and iPod will not be able to connect.
    A newer version Time Capsule produces both a 2.4 GHz and 5 GHz signal simultaneously, so faster devices would connect to the 5 GHz band and slower devices connect to the 2.4 GHz band.
    That being said, there is also something to be said for leaving well enough alone. Your call.

  • My 1st generation iPhone cannot connect to iTunes store

    I have a 1st generation iPhone with iOS 2.  When I open the App Store app I get a pop up message that says "cannot connect to iTunes Store". The iPhone is connected to wifi and loads pages perfectly.  Please help!

    I had a go at that.. and it comes up saying i dont even have any updates to download.. but i do on my iPhone. It's annoying. Even if i do download the apps on my computer and sync, how are my sisters supposed to update my app on their ipods/iphones?

  • My friend asked me to load some of my music to his 1st generation ipod from my 4th generation ipod - do i need to have the older software to do this?

    My friend asked me if I would help him out buy sharing my extensive music collection with him.  He mailed me his ipod it is running version 3.1.3 (7E18) I believe it is an ipod 1st generation.  I am running version 4.3.5 (8L1) on a 4th generation ipod.  Am I going to have to download the older version for his ipod in order to have full access to it?  Also, I connected his ipod to my computer and was able to access his music library (by opening a new account on computer); however, his apps are all over the place and I was attempting to organize them, but was unable to acces the apps.  The apps appear to be locked.  What gives?

    You can only sync to one computer, unless it is set to manual. The easiest way is to have the music in his library at any rate.
    If it is purchased music it is tied to your account and would need to be authorized to play on other computers, I wouldn't advise going that route.

  • HT1273 Can 1st generation Apple TV use AirPlay function ?

    Can 1st generation use AirPlay function ? Or need any upgrade ? Thanks

    We've posted some tips related to this matter on this link to Apple TV
    The tips are located toward the bottom of the page.
    The information likely won't help everyone but it will answer some questions.
    Per Apple policy, we want you to know we might benefit from your visit to our free information or even profit.
    We hope you find the information and video(s) useful.

  • Mountain Lion & Airport Express (1st generation)

    Since upgrading to Mountain Lion, my Airport Express (1st generation) has becomed unusable. How can I still use it? Feels kinda absurd, it is still working perfectly, although old.

    Did you ever get an answer to your question...  I have the same issue

Maybe you are looking for

  • Uninstall & install iOS5 on iPhone4

    I have an iPhone4 having size of 8GB. When I connect iPhone to iTunes, It shows me total space 6.37 GB. Q.1 ) If apple says 8GB, where is the remaining space then ? It should specify somewhere that 1.73 GB being used by iOS system. Why is not specifi

  • TREX problem: Rapid Installer 2.0

    First I try to install EP 6.0 SR1 with Rapid Installer 2.0, I got an trex error in the installation. In this forum (read by Nicky Gromeleit) I got the information that installing TREX in rapid installation is not possible so I try again the following

  • BPC 7.5 NW - COPY DATA in ScriptLogic

    Hi we have this code ok. *WHEN CTA_HHRR *IS BAS(REMUNERACIONES) *REC( FACTOR = ([CTA_HHRR].[PARAM_000000001],[Centro_De_Costo].[Dummy]),BAS(REMUNERACIONES) ) *ENDWHEN Now, we need copy data value inserted in ACCOUNT1 for 2010.ENE to FEB.2010 until 20

  • Installing BusinessObjects Edge Series 3.1 ERROR CMS: STW00226

    Hi, I'm installing BO Edge Series on an Oracle Database but in one of the steps in the installation where it says choose the database, I choose Oracle, there are three fields, 1 host, 2 username, 3 password. In the first choose the instance of oracle

  • Itunes hangs. can't sync with phone. have re-installed, not luck. as soon as i open itunes it says cannot sync with phone and hangs

    Since a few days ago I am unable to sync my iphone 5s with itunes on Macbook pro. As soon as I open itunes, it hangs. it doesn't give me the opportunity to disable or enable the syncing, it hangs immediately. I have also tried removing itunes from Ma