Hi! 21.5" iMac Intel after

Hi! I had to reinstall OS X 10.6.8 on my 21.5" iMac Intel after which I can't install the Lion from the Apple Store I purchased last year. It downloads but comes with an error message to install. Any help is appreciated.
Thank you.

Make sure your Mac meets Lion's requirements:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
As for downloading issues ..
Installing the Mac OS X 10.6.8 Update Combo reinstalls the App Store for you which may help. It's ok to do this even though you are already running v10.6.8.
Restart your Mac after the combo is installed then launch the App Store.
How to re download apps from the Mac App Store:
Open the App Store. From the menu bar click Store > Sign In
Click Purchases from the top of the App Store window.
Select which apps you want to re download. Then right or control click where you see Installed then click Install.
Make sure and use the same Apple ID used for the original purchase.

Similar Messages

IMac Intel - After installing 10.6.5 imac freezes on startup

I installed 10.6.5 on my intel imac over the weekend and after a couple of uses my imac will no longer boot.
It gets to the gray screen with the loading spinner and after a few seconds the spinner freezes.
I've tried booting into safe mode. After the progress bar disappears the gray screen and spinner appears after a few more seconds the spinner freezes again.
I've reset the p-ram multiple times.
There is a cd in the drive which I can't remove. I tried booting into Open Firmware using Command-Option-O-F; but even that boot freezes.
Any ideas?

You can try getting the CD out by holding down the eject button while booting, if you can get the CD out then you can boot try booting from the Install Disc that came with the Mac. If you can't get is ejected you will probably need to take it in for service at an AASP.
I'm assuming you haven't been using a bootable clone like SuperDuper or Carbon Copy Cloner on an external HD. If you have then you could boot from that.
Roger

Unable to boot computer iMac intel after downloading and installing latest iPad software

I downloaded and installed the latest iPad software and my iMac will now not boot up. The iMac was getting a little slow just prior. Is one year old and this is the first problem. I have put the system DVD in and rolled back a couple weeks. Still no start up.

Imayit55 wrote:
Sorry. I downloaded the latest iPad update through iTunes using my iMac. Then synced the iPad to update the iPad. Updated iPad is fine. iMac will now not boot up. I put the iMac osx install dvd disk in and used it to rollback two weeks. No help. I am now running the disk verify program from the osx install DVD
There is no rollback feature on the OSX disc (which version of OSX is this, Leopard, Snow Leopard?) so I am unable to understand this unless you are referring to a restore from Time Machine, is this what you did?

Migrating to iMac (Intel) after 25+ years pf PC use!

Hi everyone. My first post here, and I'm a Mac virgin, so please treat me gently!
Next week I'm picking up my new iMac. This will be the first Mac I have ever owned (or even used) and I have a question: What is the fastest and easiest way to transfer my PC data (mainly my own digital photos) over to the iMac? I have about 100 gig of data that I want to transfer. My first thought was to backup my stuff to DVD and then copy it off into the Mac, but that would take a couple of dozen DVDs. I do of course have backups of the data already but they are on a secondary HD.
Any help would be appreciated.

Welcome to Apple Discussions!
Do you have a home network? That is probably the fastest way. For more information about Macs and switching to the bright side, see the following links.
How to Move to a Mac: http://www.apple.com/macosx/switch/
Switch 101: http://www.apple.com/support/switch101/
Mac 101: http://www.apple.com/support/mac101/
iMac Fast Start: http://docs.info.apple.com/article.html?artnum=303636

TA25225 Display Flickers in my 21" Imac Intel. This happened after the fan noise in my machine. I also reported the problem and gave to the service centre, but the problem still persist. Please help. I purchased it 3 - 4 weeks ago

Hello,
I purchased my imac intel 21" 3-4 weeks ago and in the 2nd week i faced an issue with the machine. When i switched on in, there was a fan noise and a white screen. The machine had hanged. I reported the problem and gave to the service centre. After testing for a week, they said that there is no problem with the imac. Again i faced the same problem after receiving it from the service centre. They again tested the machine for 3-4 days and reported as no problem with the machine. Couple of days back, I received the machine from the service centre, and on the same day when i switched it on, there are flickers in the display. Please help me solve the issue. I am from India. The service here is very bad.
Hope for a resolution
Thanks

Hello RedDevil07
Yes I agree with seventy one. It's common sense to do this, especially now. I would also contact AppleCare and report this issue with them, it will get documented and you will have a caseID that you can refer to when talking to them in the future should this issue go one.
Be polite with AppleCare and your AASP. Hopefully everyone is being honest and trying to help you and not what might appear to be the opposite.
Patience is a virtue, but I thoroughly understand your frustration.
Let us know how it goes, we are here to help in whatever way we can.
I encourage you to contact AppleCare to report this experience and get their recommendations. There is an expectation that you should have that AppleCare is there to help you as a customer. I am sure they will too!

My 5 yr old 2 GHz Intel Core Duo 20" iMac, right after I disconnected an external HD that had been on the desktop (i.e. I forgot to eject it properly), started displaying video anomalies (lines); testing (TechTool Deluxe 3.1.3) indicates the video is f

My 5 yr old 2 GHz Intel Core Duo 20" iMac, right after I disconnected
an external HD that had been on the desktop (i.e. I forgot to eject it
properly), started displaying video anomalies (lines); testing
(TechTool Deluxe 3.1.3) indicates the video is failing.
The graphics card is an ATI Radeon X1600. Is this reasonably
replaceable? If so, is the "MPC ClientPro 434 All In One ATI MXM X1600
PCIe 128MB Video Card" I found on eBay (for $25, used) essentially the
same unit?
My soldering skills are, sadly, poor.
And it only dawned on me a couple days ago that because this iMac does
not have a Core 2 Duo processor, it will not be able to enter the
"Lion" generation.
Thanks,
Patrick
PS Are manuals for this model available? I have a copy of the Peachpit
Apple Training Series "Desktop and Portable Systems, Second Edition"
but it only goes up to the G5 20" iMac. There doesn't appear to be a
3rd or later edition in the series.

My 5 yr old 2 GHz Intel Core Duo 20" iMac, right after I disconnected
an external HD that had been on the desktop (i.e. I forgot to eject it
properly), started displaying video anomalies (lines); testing
(TechTool Deluxe 3.1.3) indicates the video is failing.
The graphics card is an ATI Radeon X1600. Is this reasonably
replaceable? If so, is the "MPC ClientPro 434 All In One ATI MXM X1600
PCIe 128MB Video Card" I found on eBay (for $25, used) essentially the
same unit?
My soldering skills are, sadly, poor.
And it only dawned on me a couple days ago that because this iMac does
not have a Core 2 Duo processor, it will not be able to enter the
"Lion" generation.
Thanks,
Patrick
PS Are manuals for this model available? I have a copy of the Peachpit
Apple Training Series "Desktop and Portable Systems, Second Edition"
but it only goes up to the G5 20" iMac. There doesn't appear to be a
3rd or later edition in the series.

I am puzzled by iMac(Intel ?). I am running an iMac 24 and use Mac:Office 2008. After having downloaded my Os X LION upgrade, I am suddenly unable to SAVE (and thus alter) my Excel quotations. This is a major issue for a salesman. Can anybody help me

I am puzzled by the meaning of iMac (Intel) as I use an iMac 2 period. I am running Mac : Office 2004 and do all my quotations in Excel. After upgrading to OS X LION, I am suddenly unable to SAVE my spreadsheets. As a salesman whose quotations need frequent updating, my situation is perilous to say the least. Can anyone help me ?

Office for Mac 2004 is NOT compatible with Lion. It must be upgraded to Office for Mac 2008 or 2011, once you have upgraded the files will be accessable. Office for Mac 2004 is written for old PPC (Power PC) based machines. Beginning with Lion support for PPC based apps has been dropped.

Can't use ipod and external HD anyon imac g3 after using it on intel mac...

hi, i've recently bought a intel imac and it has (what else) tiger on it. My girlfriend has an old g3 imac with jaguar on it. Today I connected my ipod to the old g3 imac (because i needed some files, about 10gb) and it didn't appear in finder or in itunes.
After trying some stuff, like resetting and retrying, etc., I went home to get my external HD and again, when i plugged it in, it didn't appear in finder. Strange, because before I had my new computer, the ipod and the HD were connected to the g3 imac all the time and on the intel imac, they still work perfect.
Then, I went to disk-utility and it recognised my HD but when i tried to activate the external HD from there, nothing happened. No error, no message, nothing.
But (and as we say in Belgium, now comes the ape out of the sleeve) when i clicked repair (in disk utility), it said that i didn't have the permissions to activate it...
--it was something like cannot activate dev/disk/blablabla dont have permission something something...
Could it be that my new computer has put some sort of protection on my ipod and external HD? and how can I remove that protection?
Or is there another solution for this strange and dark mystery??????

I have 2 ipods, both would not work on G3 iBook once connected to an Intel iMac. Took me a long time on the phone to Apple to figure this one.
It seems to be a conflict with the 'volume format' of the ipod. Plugging it into an Intel will change the format to 'Mac OS extended (journaled)' for some reason my G3 would not recognise it then. To fix it I plugged ipod to the Intel and went to disk utility. Select the ipod (hopefully you can activate it). Go to the Erase menu and change the volume format to 'Mac OS extended'.
It should stay on that format and work on both computers.
Hope it works
iMac (Intel) Mac OS X (10.4.5)

My iMac Intel 17" stalls at bluescreen after updating Tiger 10.4.6

After auto upadting my OSX 10.4.6 on my iMac Intel 17" system it is stalling at bluescreen after the Apple symbol and wheel rotation page. Ineed help to come out of it. I have data in my desktop and also in Harddisk.
iMac Intel 17" Mac OS X (10.4.6)

I was installing the update to 10.4.6 earlier this evening, and had the very same problem that you described, Ambarisha.
After about an hour on the bluescreen I got angry, and did a restart (the wrong thing to do, I know). It wouldn't even complete the load bar screen at that point, and would hang up.
Then I tried tried Disc Utility, found a number of problems while verifying the disc, fixed them, restarted, and it locked up again on a blue screen after the load page bar disappeared.
I ended up reinstalling the System from the OSX Install Discs that came with the Mac.
Luckily, it seems as if all of the information is still on my computer, but I had to reinstall Photoshop because some files it used that are apparently installed in the system folder were now missing.
So now I don't want to try to update at all for fear of more lost work time.
Is this a common problem, and if so, is there a fix or perhaps a work around?
Thanks for any help, and sorry that I could not answer your question, Ambarisha.

If i buy imac(intel) in canada apple store and then after i want 2 gift my brother in india so u can ship it in india

if i buy imac(intel) in canada apple store and then after i want 2 gift my brother in india so u can ship it in india

You will need to ask the authorities in India and Canada, this is a technical help forum. I suspect you are simply trying to save your brother money however I suspect it would be easier and less expensive in the long term if he buys the system he wants in India.
Roger

IMAC intel A1208 is stuck on blue screen after start-up. What is the fix?

IMAC intel A1208 is stuck on blue screen after start-up. How can this condition be resolved?

Please carefully read Apple's Gray screen appears during startup

After updating to Snow Leopard on my iMac (Intel) DVDs not recognized

After updating to Snow Leopard on my iMac (Intel) DVDs (Software, Movies, Data, Etc.) are not recognised however CDs are recognised.
Can any one help me to solve the problem?

Zap the PRAM and Reset the SMC, then try again.

No sound on iMac Intel 24'' EMC 2267 after hard drive replacement

I replaced my hard drive on my iMac Intel 24'' EMC 2267, due to numerous bad blocks, by following all the instructions on iFixit.com. I did not experience any problems.
I then installed all my files from a Time Machine backup. There were no problems with the restoration of my files. It seems that my new hard drive works beautifully.
However, one serious problem I have is that now there is no sound on my iMac. There is no startup chime, and there are no other sounds. When clicking on Sound in System preferences, it says that there are "no output devices found".
When opening system profiler, in the Audio (built-in) tab it says "Audio ID: 0"
I re-opeend my iMac to make sure that all cables were connected properly, and I did not manage to spot any problems.
I tried to reset PRAM and EMC but these did not solve the problem. I am working under MacOS X 10.6.8
Can someone help please? Any information provided will be most appreciated. Thanks in advance for your support.
Regards - Gina

I think when you replaced your hard drive you bumped into the daughter board and that is for the sound and the wireless, You need to get another daughterboard or contact the Apple Store if your Mac is stilll under warranty.

Full Firewire Port Failure (three different machines : iMac Intel, iMac G5, Black Macbook)

I'm experiencing a failure of all FireWire ports on all of my three machines. I believe this problem began with a faulty external, FireWire powered hard drive from G-Tech. Here are all my specs, followed by a rundown of the order of events that has lead to this situation, followed by the various troubleshooting I have done.
Equipment :
iMac Aluminum Intel - 24" Mid 2007 - running OsX 10.5.8 - currently 1 FW400 and 1 FW800 ports disabled
iMac G5 - 20" - running OsX 10.5.8 - currently 2 FW400 ports disabled
MacBook - 13" black Early 2008 - running OsX 10.5.8 - currently 1 FW400 port disabled
2 500GB G-Drives (by G-Tech) - AC powered
1 5TB G-RAID Drive (by G-Tech) - AC powered
1 250GB G-Drive Mini (by G-Tech) - FW powered
Initial Setup :
1 500GB G-Drive connected directly to iMac Intel via FW800
1 500GB G-Drive connected to first 500GB G-Drive via FW800 (daisy chained)
1 250GB G-Drive connected to second 500GB G-Drive via FW400 (daisy chained)
1 5TB G-RAID connected directly to iMac Intel via FW800>400 adapter
Sequence of Events :
I had transferred some files to my G-Drive Mini in order to move them to my MacBook from my iMac Intel. I copied the files to the G-Drive Mini and ejected it normally and plugged it into my MacBook via FW400. The drive would not mount, and the power indication light would not go on. After experimenting with various connections and cables I was able to get the drive to power with FW400 and USB connected at the same time, but the drive would still not mount.
I then plugged the G-Drive Mini back into the 2nd 500GB G-Drive as it was previously connected via FW400. This action caused the G-Drive to immediately reboot and eject itself from my iMac Intel.
I then attempted to plug the G-Drive Mini into my older iMac G5 via FW400. Immediately upon plugging in, the computer shut down, and would not restart.
At this point I kind of started to freak out. I was unaware of the extent of the damage, but was upset that the FW powered G-Drive Mini had shutdown my iMac G5. I contacted G-Tech Support and they offered to replace the drive and instructed me how to manually reset the computer's SMC by opening up the iMac and finding the Cuda switch. This worked and the computer was able to start and function again, but the FW400 port seemed to be disabled.
I then tried to swap out configurations and drives on my iMac Intel to see if there was any cable problems, but doing so, slowly rendered all my FireWire ports useless. It's almost as if the act of plugging in the FW-powered G-Drive Mini started a kind of shortout chain reaction. I soon learned that none of my hard drives would connect to any of my three machines, with any kind of cable combination via FW400 or 800.
I am currently able to connect my 5TB G-RAID drive to any machine via USB, as well as my G-Drive Mini. I am unable to access the other two external hard drives, as one has only FW400 and 800 ports and the other's USB connection is not functional as well on any machine.
Troubleshooting Steps Taken :
I have on all machines, reset the SMC in the following methods. iMac G5 - manually, by opening the case and pressing Cuda switch. iMac Intel - unplug, hold power button, restart method. MacBook - unplug, hold power button, restart method.
I have also on all machines, reset the PRAM by the Cmnd + Opt + P + R method at startup.
I have also unplugged all cables / removed battery, from all machines and left alone for a period of at least 12 hours, then re-plugged in each device one at a time.
I have also restored my hibernate mode (through Terminal) on my iMac Intel to mode 3 and also turned on Virtual Memory in system preferences and set hibernatemode to mode 7, the restarted and attempted to plug in devices. The reason I even began to deal with the hibernate mode was because I had around the same time my ports began malfunctioning, installed the DeepSleep widget, which allows you to control your computer's hibernate mode. I thought that tweaking with this setting may have made my computer incapable of recognizing devices that were plugged in. I have since uninstalled the widget and experimented with different hibernatemodes to no avail.
I also have Repaired Disk Permissions and Repaired Disk on all my machines, from within my Admin User as well as from the OsX Install Disk.
Sometimes in my System Profiler (like right now for example on my iMac Intel) my computer is "Unable to list FireWire devices," but sometimes, no warning message comes up and it simply displays the appropriate Bus speed.
I also conducted a system restore using a backup from my 5TB G-Raid Drive via USB, to a date before these problems started, but my ports are still not working.
Summary :
I am looking at a situation where all my FW ports on all my computers appear to be disabled, and possibly also on my four external hard drives, with one possible USB port malfunction on one external drive. The only root of this seems to be a malfunctioning FW-powered external hard drive.
Is this possible? Has this happened to anyone else before? G-Tech assures me that it is impossible for my 250GB G-Drive Mini to draw enough power from a computer to permanently disable any ports, but I have tried all of the FW port problem troubleshooting steps and am at a loss.
I do not have AppleCare and would like to avoid bringing two iMacs, a MacBook and four hard drives to the Apple store and take my chances with the geniuses.
I would appreciate any help or advice you all have. Thanks for reading and for your support!

Ok. So if that was too confusing, I've re-labeled this post with letters for my hard drives and some mapping of the connectivity configurations I have attempted.
Equipment :
iMac Aluminum Intel - 24" Mid 2007 - running OsX 10.5.8 - currently 1 FW400 and 1 FW800 ports disabled
iMac G5 - 20" - running OsX 10.5.8 - currently 2 FW400 ports disabled
MacBook - 13" black Early 2008 - running OsX 10.5.8 - currently 1 FW400 port disabled
1 500GB G-Drive (by G-Tech) w/ no USB port - AC powered : A
1 500GB G-Drive (by G-Tech) w/ USB port - AC powered : B
1 5TB G-RAID Drive (by G-Tech) - AC powered : C
1 250GB G-Drive Mini (by G-Tech) - FW powered : D
Initial Setup :
C > FW400-800 adapter > iMac Intel
D > FW400 > A > FW800 > B > FW800 > iMac Intel
Sequence of Events :
D > FW400 > MacBook
I had transferred some files to my G-Drive Mini D in order to move them to my MacBook from my iMac Intel. I copied the files to the G-Drive Mini D and ejected it normally and plugged it into my MacBook via FW400. The drive would not mount, and the power indication light would not go on. After experimenting with various connections and cables I was able to get the drive to power with FW400 and USB connected at the same time, but the drive would still not mount.
D > FW400 > A > FW800 > B > FW800 > iMac Intel
I then plugged the G-Drive Mini D back into the 2nd 500GB G-Drive A as it was previously connected via FW400. This action caused the G-Drive to immediately reboot and eject itself from my iMac Intel.
D > FW400 > iMac G5
I then attempted to plug the G-Drive Mini into my older iMac G5 via FW400. Immediately upon plugging in, the computer shut down, and would not restart.
At this point I kind of started to freak out. I was unaware of the extent of the damage, but was upset that the FW powered G-Drive Mini D had shutdown my iMac G5. I contacted G-Tech Support and they offered to replace the drive and instructed me how to manually reset the computer's SMC by opening up the iMac and finding the Cuda switch. This worked and the computer was able to start and function again, but the FW400 port seemed to be disabled.
I then tried to swap out configurations and drives on my iMac Intel to see if there was any cable problems, but doing so, slowly rendered all my FireWire ports useless. It's almost as if the act of plugging in the FW-powered G-Drive Mini D started a kind of shortout chain reaction. I soon learned that none of my hard drives would connect to any of my three machines, with any kind of cable combination via FW400 or 800.
D > USB > AnyMachine
C > USB > AnyMachine
I am currently able to connect my 5TB G-RAID C drive to any machine via USB, as well as my G-Drive Mini D. I am unable to access the other two external hard drives, as one has only FW400 and 800 ports (A) and the other's USB connection is not functional as well on any machine (B).
Troubleshooting Steps Taken :
I have on all machines, reset the SMC in the following methods. iMac G5 - manually, by opening the case and pressing Cuda switch. iMac Intel - unplug, hold power button, restart method. MacBook - unplug, hold power button, restart method.
I have also on all machines, reset the PRAM by the Cmnd + Opt + P + R method at startup.
I have also unplugged all cables / removed battery, from all machines and left alone for a period of at least 12 hours, then re-plugged in each device one at a time.
I have also restored my hibernate mode (through Terminal) on my iMac Intel to mode 3 and also turned on Virtual Memory in system preferences and set hibernatemode to mode 7, the restarted and attempted to plug in devices. The reason I even began to deal with the hibernate mode was because I had around the same time my ports began malfunctioning, installed the DeepSleep widget, which allows you to control your computer's hibernate mode. I thought that tweaking with this setting may have made my computer incapable of recognizing devices that were plugged in. I have since uninstalled the widget and experimented with different hibernatemodes to no avail.
I also have Repaired Disk Permissions and Repaired Disk on all my machines, from within my Admin User as well as from the OsX Install Disk.
Sometimes in my System Profiler (like right now for example on my iMac Intel) my computer is "Unable to list FireWire devices," but sometimes, no warning message comes up and it simply displays the appropriate Bus speed.
I also conducted a system restore using a backup from my 5TB G-Raid Drive C via USB, to a date before these problems started, but my ports are still not working.
Summary :
I am looking at a situation where all my FW ports on all my computers appear to be disabled, and possibly also on my four external hard drives (A, B, C, D), with one possible USB port malfunction on one external drive (B). The only root of this seems to be a malfunctioning FW-powered external hard drive.
Is this possible? Has this happened to anyone else before? G-Tech assures me that it is impossible for my 250GB G-Drive Mini D to draw enough power from a computer to permanently disable any ports, but I have tried all of the FW port problem troubleshooting steps and am at a loss.
I do not have AppleCare and would like to avoid bringing two iMacs, a MacBook and four hard drives to the Apple store and take my chances with the geniuses.
I would appreciate any help or advice you all have. Thanks for reading and for your support!

Problem with photoshop CS6 I have an imac intel 10.6.8...when I try to launch photoshop the icon bounces a few times then the adobe app manager tries to open then they both quit. they keep doing this over and over again but won't launch. worked fine for a

problem with photoshop CS6 I have an imac intel 10.6.8...when I try to launch photoshop the icon bounces a few times then the adobe app manager tries to open then they both quit. they keep doing this over and over again but won't launch. worked fine for a few days after install.

problem with photoshop CS6 I have an imac intel 10.6.8...when I try to launch photoshop the icon bounces a few times then the adobe app manager tries to open then they both quit. they keep doing this over and over again but won't launch. worked fine for a few days after install.

Hi! 21.5" iMac Intel after

Similar Messages

Maybe you are looking for