Hi, a bit of a complicated one :)

We have move from Switzerland to Italy and I used a time capsule as back up disk and wireless in Switzerland. The Italian telephone company came to install the internet with their own wireless router and had no idea what to do with my time machine. We do have internet working but am not sure if I can connect my my time machine to the wireless router? Also would like to know if I can just plug in my time machine into my MacBook Pro with an ethernet cable to enable me to back up my computer?
Thanks for your help in this matter.
Best regards,

If is possible to connect the Time Capsule to your wireless router via ethernet? Take a look at this link, https://discussions.apple.com/thread/3706927?start=0&tstart=0

Similar Messages

HT201269 Bit of a tough one...I have a hard drive, iPod and iphone synced to an itunes on a computer that's been irreparably broken. Just bought a macbook pro and want to try and salvage everything onto the itunes on there. Any ideas?

Bit of a tough one...I have a hard drive, iPod and iphone synced to an itunes on a computer that's been irreparably broken. Just bought a macbook pro and want to try and salvage everything onto the itunes on there. Any ideas?

Yeah it seems to be fine although I'm a bit reluctant to fire it up with the Mac just incase. Thanks for the response btw

Bit of a strange one.... HD Movies "Judder" when streaming to ATV2

Bit of a strange one.... all my HD Movies since the latest ATV2 update "Judder" when streaming.
It's very hard to describe but whenever there is a fast Zoom or Pan shot the image flickers for around half a second. It seems to happen every 20 seconds or so, this has only been the case since the latest update of ATV2.
I purchased Tron Legacy (HD) from the iTunes store and it occurs when playing that movie. It also happens on all my self generated HD contect.
Strangely it does not occur when streaming to my 1st Gen Apple TV, which makes me think it has nothing to do with my Home Network setup, as they are both connected via Ethernet cables.
There is only a problem with HD Streaming and ATV2.
Any assistance would be appriciated
Hans

The last update seems to have introduced a feature which lets the Apple TV detect the native frequency of your TV, in the UK this is probably but not always 50 Hz, this is beneficial for Home video and broadcast content in these locations where the frame rate is 25 fps. It isn't ideal for 30 fps or 24 fps content though which most of the iTMS movies and TV shows are.
Also of relevance is that some TV's make a better job of telecine/detelecine than others due to the quality of their components.
Although I don't necessarily think that Apple are responsible for the ability of 3rd party TV's, the problem could be easily overcome by allowing the user to manually select the Apple TV output as was the case with the Apple TV 1. This would allow the user to switch to 60 Hz for 30/24 fps content and 50 Hz for 25 fps content.
Some TV's have motion settings which worsen/improve the situation depending on their settings.

Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - not working for one user - working for another

Hi,
I recently have an issue with Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - NOT working for one user - working for another.
Windows 7 updates recently installed ???
By checking the device properties on the user that works - "Synaptics PS/2 Port Touchpad 13/10/2011 Version 15.3.29.0"
When the other user logs on, the touchpad works for a few seconds, then a displays a black square with a red diagonal line through it, then the touchpad won't respond. Trying to use the keypad to navigate to system diagnosics or anything to find further info is useless....

Hey eagle_no11,
Thank you for joining the HP Support Community!
I will do my best in assisting to hopefully get the TouchPad to work on the second user profile.
What I would like to start off with, is to restore the original Synaptics drivers onto the profile that is not working correctly. I have included the document Using Recovery Manager to Restore Software and Drivers (Windows 7).
Once you have installed the original drivers, you will need to complete all updates from both HP, as well as Windows. For these updates, if you open the HP Support Assistant, and select Maintain, you should see an option for updating.
Please let me know how these steps do work out for you.
Have a great day!
I worked on behalf of HP

Home folder empty, can't login, complicated one--asking for experts

My home folder is empty and when I log in to my username I just get the blue pattern screen and it never progresses.
I posted this to the PB forum also because I'm not sure what caused this... It's complicated.
OK, for starters... Latest OSX, 1.25gh with 2 gigs Crucial ram. Filevault turned on. Lately there has been a little bit of strangeness from the laptop... more spinning wheels than normal, more delays. SMART status always said verified. Yesterday ran hardware check off the laptop install disk and everything checked out.
I occasionally use a G-Raid Firewire 400/800 CardBus adapter that often freezes up the laptop and causes a forced restart. I think I had it in at the time that i was doing a backup to an external drive with SuperDuper. It did cause a freeze a little bit earlier. On first backup try I got an error due to having too much data on my drive to be cloned by SuperDuper, so I trashed several gigs of photos I didn't need on my PB HD anymore (the photos had been in the HD area, not my encrypted home folder). It should have freed up enough space to successfully clone but I still got the SuperDuper error that said in the log that there wasn't enough free space. So I figured I'd restart. Ever since then, I haven't been able to get past the login on either my main drive or the clone. Ran DiskWarrior, repaired permissions, and repair disk off disk utility to no avail. However, I can log in to two other usernames (my wife's an a guest username). My user folder appears to be empty.
Luckily, I have a third clone on a pocket HD for such an occasion on the road, but it's a bit dated so I'd rather get my current user folder back if possible.
Help??? Anyone???

Before doing anything below, I reccomend you try this. In your wife's account, open up your old users folder. Choose File>Get Info. Where it says size, if the size is over a couple hundred megabytes, then all of your data is still there. If it just says a couple of KB, post here. I think your data is gone. Continue if it says something over a couple hundred MB or any amount of GB.
I noticed David Yonder's reply in the PB forum. What he was saying actually makes a lot of sense. Here is what I reccomend. Log into your wife's account. Open up system preferences. Go to Accounts, "Click the lock to make changes," select your account, not your wife's, and click "-" (delete) at the bottom. Click okay at the prompt. Create a new Administrator account with the same name as your old one. Then, open up /Users/Deleted Users/yourusername.sparseimage You should have all of your old files back. Create a new adiministrator account for yourself. Make a new folder on the root level of your hard drive. Name it "Backup." Copy all of the recovered files into that folder and login to your new account. Open up the backup file as well as your new users folder and drag all of the recovered files into their respective folders. That should do it. If it doesn't work, post again. Happy fixing!
Jake
iMac G5 Mac OS X (10.4.3)

Bit of a strange one this. Any help appreciated.

I have been stuck on a PPC g5 2gb dual tower for the last 8 years. 12 months ago the internal power died and I paid to have it repaired. A couple of weeks this happened again. It's not really economical for me to repair it and I really need to be getting up to speed before I fall further behind the Mac community. With this in mind I took the plunge and bought a new MacBook pro this week. I am excited about the possibility of this machine but my issue is this. I presume it will come with lion or mountain lion installed.
My G5 tower had two internal drives one with leopard and one tiger. A newish western digital caviar black 1.5 tb disc which was partitioned into a 1tb and a 500 mg drive. Both these were to host the OS 10.5.8 my files iTunes iPhoto mail docs and other bits. The other internal drive was a bootable 10.4.7? Disc running audio apps cubase etc
I presume the internal discs are still intact and readable although the Mac is dead. How will I migrate the data to the new MacBook pro. Is it advisable to buy an external usb3 enclosure and get the data somehow that way. Then I can use these drives as backups for the new Mac.
I know most poc programs I had will need to be replaced. However will I be able to get my iPhoto and iTunes library back from the redundant drives and what about my mail? Is there anything else I need to be aware of and will it be a complete nightmare or would this process be straight forward. I know I am moving three operating systems ahead so I can only imaging I may have some difficulty. Any advice would be greatly appreciated.
Thanks in advance.

j Foss wrote:
I presume it will come with lion or mountain lion installed.
Most likely. However, do note that it might in all likely hood boot with Snow Leopard, since the firmware has changed. At least that's the consensus amongst those buying up iMacs, MacPros, and MBPs. Apparently, won't work with the ones shipping with retina displays. That said, it might behoove you to spend $20 USD and get a Snow Leopard install disc. Borrow another machine, install it onto an external HD, update it to 10.6.8 and other OS X apps, and try booting the new MBP with it.
Is it advisable to buy an external usb3 enclosure and get the data somehow that way.
Either that or a combined FW800/USB 3.0 enclosure. Then, consider updating the Leopard volume to Snow Leopard. Or getting an additional ext HD with FW800/USB 3.0 ports, cloning the Leopard one, and then upgrading one or the other to SL->10.6.8. Then, hook it up to the new MBP, follow the steps in Pondini's Setup New Mac guide. Once that's finished, try booting with the SL ext HD. If that works, then you'll be able to use all legacy PPC apps except the classic ones.
If successful, whether or not you wipe Lion/ML from the MBP, clone the SL volume to it, or clone the Lion/ML volume to the ext HD (another partition) so you can play with it, is up to you.
Bottom line is you can probably do most of your current Leopard work with the MBP running SL. If so, then you can take your time examining whether or not to move forward to the iOSified OSs, Lion and ML. I compute with SL and play with the others, but, since I have no iOS or wireless devices, they don't offer much for computing and minor security improvements.

64 bit version of Business One

I have looked at the supported platform list on this portal and see no mention of when SAP plans to release a 64 bit version of SAP B1. The current versions will run on a Windows 2008 Server x64 platform but they appear to still be running as a 32 bit application.
Has anyone heard?
Thanks

Thanks Gordon. I wasn't implying they should replace the 32 bit version only that they should release a 64 bit version like Microsoft does for SQL Server and you can choose which one you want to install.
Since SAP B1 likes memory, having native access to more than 4 GB would probably help it perform better.
I think SAP moved to 64 bit only on their other SAP platforms.

Separating 16 bits of data into one 12 bit and one 4 bit channel

I have 16 bits of binary data and i'm trying to split these into one 12 bit and one 4 bit channel. I know that I could use something like:
Dim Channel1 : Set Channel1 = Block.Channels.Add("Channel1", eI16)
Channel1.Formatter.Bitmask = 4,095 'xxxx 1111 1111 1111
but, i'm not sure how to grab those 4 bits out of the 16 bit channel1 and make channel2. It's like i almost need to say something like:
Dim Channel2 : Set Channel2 = Block.Channels.Add("Channel2", eI16)
Channel2 = Channel1.Formatter.Bitmask = 61,440 '1111 xxxx xxxx xxxx
Can anyone help out???? thanks.

OK...This is still straightforward. Her is what you want to do :
CurrPos = File.Position ' remember where the block starts
Set Block = File.GetBinaryBlock()
' set up all channels which can be read directly
Dim Channel1 : Set Channel1 = Block.Channels.Add("Channel1", eU16)
Dim Channel2 : Set Channel2 = Block.Channels.Add("Channel2", eByte)
Dim ChannelPH : Set ChannelPH = Block.Channels.Add("Dummy", eU16) ' just a placeholder
Dim Channel5 : Set Channel5 = Block.Channels.Add("Channel5", eU16)
Dim Channel6 : Set Channel6 = Block.Channels.Add("Channel6", eByte)
' Now we need a block which has one channel only. This channel will be used to extract the bits.
' The block needs to start where the third schannel of the above block starts :
File.Position = CurrPos + 2+1 ' 2 for the U16 channel, 1 for the byte channel
Set Block = File.GetBinaryBlock()
' Set the scan width. This defines the gaps between the values of a channel
Block.BlockWidth = 2+1+2+2+1 ' U16 + Byte + U16 + U16 + Byte
Dim Channel3 : Set Channel3 = Block.Channels.Add("Channel3", eU16)
' .. apply bitmask and scaling (see my last example)
' Do the same for the second channel
Set Block = File.GetBinaryBlock()
' Set the scan width. This defines the gaps between the values of a channel
Block.BlockWidth = 2+1+2+2+1 ' U16 + Byte + U16 + U16 + Byte
Dim Channel4 : Set Channel4 = Block.Channels.Add("Channel4", eU16)
.. apply bitmask and scaling (see my last example)
Do the same for the second channel
I hope this works as expected. Let me know if you need more help...
Andreas

32-bit mode and only one Instrument?!?!

I have my Logic Studio/Pro 9.1.3 set to run in 64-bit mode... But unfortunately I can only view one Virtual Instrument at a time. Is there anyway to view multiple instrument interfaces or is this just a limitation of running in 64-bit mode.
Also, if this is a limitation of 64-bit mode will they eventually add the ability to open more than one V.I. at a time? I like to jump between virtual instruments and the 32-bit VIs (Which most of mine are) only run one at a time.

montreaux wrote:
I have my Logic Studio/Pro 9.1.3 set to run in 64-bit mode... But unfortunately I can only view one Virtual Instrument at a time. Is there anyway to view multiple instrument interfaces or is this just a limitation of running in 64-bit mode.
Strictly speaking it is a limitation of using 32-bit plugins in 64 bit mode. The plugins don't run in Logic anymore, so you effectively switch to a different program (32b AU bridge) when opening the interface of 32 bit plugins.
It is just a waiting game until most/all 3rd party plugs and instruments are 64 bit, or until the 32bAUbridge has improved to indeed show multiple GUI's at a time.
Also, if this is a limitation of 64-bit mode will they eventually add the ability to open more than one V.I. at a time? I like to jump between virtual instruments and the 32-bit VIs (Which most of mine are) only run one at a time.
No idea what the plans are of the Logic developers. I hope they'll improve it, I expect they'll improve it, but I don't know anything for sure in that respect.

Bit of a difficult one

Okay so here is the persistent problem,
I have an iPhone 4 and ever since updating to iOS 7 i have had endless problems.
The biggest one being that every app that i have ever bought/downloaded, keep downloading all at once and it happens when i try to download a previously purchased app.
in full detail.
i open the app store go to purchased, scroll through untill i find the app i want to download again (This time GTA 3)
a message pops up saying that i have previously purchased this app so wont have to pay again and i have to click ok.
after clicking okay it shows my app is downloading i go to the home screen and after about 30-40 seconds it dissapears
i try again and the same happens including the message. but after it dissapears this time i will get the grey box that appears before the app logo/icon appears. then 1 by 1 or even 3 in one go. it wont stop even if i dissconect from wi/fi and mobile data.
the only way i can stop it is by plugging it in and restoreing the iphoine
if anyone can help please!!!

If you have endless problems with the update, you can restore it via iTunes but backup before you do so. Problems might be caused from OTA update.
Set Settings>General>International>Language>English
Settings>iTunes & AppStore>Sign out and sign back in.
You can also tried a hard reset by holding power and home button till it restarts and release power when u see apple logo.
You can also Settings>General>Reset>Reset Network settings.

When I open a new window, it always opens a bit to the right , or to the left, or a bit above the last one opened. Is there a way to avoid this?

windows 7 home edition
64-bits
firefox 5.0

Are you using a bookmark? There is a little-known feature of bookmarks that can load them in Firefox's sidebar. This allows you to work with two pages side-by-side. To change that setting, right-click the bookmark > Properties, then uncheck the box for "Load this bookmark in the sidebar".
(You probably didn't set this yourself. If you use a link on a website to have the site add a bookmark to Firefox, due to restrictions on what sites can do, those will always be targeted toward the sidebar.)
If that's not it, have you noticed any pattern in when this happens?

Reinstall QuickTime X a very COMPLICATED ONE TRUST ME!!!!

People I'm such a loser, accidently I trashed my quicktime playex X while cleanig my macbook pro 13 inch using the Mac Keeper software. Obviously if you are such a lucky guy as I am, you would go to your Mac OS Snow Leopard or Application install DVD and using Pacifist or other application you would download your Quicktime in minutes and everything would be fine.
BUT when I try to do so, my Mac OS or Application DVD WOULD NOT READ. The funniest thing is that i never used the **** DVD's this is my first time andit seems they don't work, now it coul be because now i live in argentina and my DVD driver got stock in DVD region 4 (for latin america) i bought my apple in Vegas back in 2010 and it was region north america, wich I think is region 2, but anyways the DVD won't work, I have NO warranty, NO money right now to buy the quicktime X and I know is not legal but i for sure try torrents etc, NOT.
I just pay internationally and called to apple support in USA and they said that the good thing is that I can go to a Apple Store and they would try my DVD's once they see it dosen't work they might install quicktime X for me. BUT in argentina the govertment does not aloww companys from USA to manage any king of bussiness in there own, so here in argentina THERE IS NO APPLE STORE only a place called MACSTATION that is a retail company that charge even the air you take inside the store. I know that i can use Quick time 7 Pro, BUT I'm a filmmaker student and I just recently bought my Final cut Pro X Suite (I save lots of money for that) and the only way that software works in full is by using and sharing skills wih the quicktime X application. WHAT SHOULD I DO????? there sould be something for this particular case! THANKS

i bought my apple in Vegas back in 2010 and it was region north america, wich I think is region 2
Region 1.
I know that i can use Quick time 7 Pro, BUT I'm a filmmaker student and I just recently bought my Final cut Pro X Suite (I save lots of money for that) and the only way that software works in full is by using and sharing skills wih the quicktime X application. WHAT SHOULD I DO????? there sould be something for this particular case! THANKS
QuickTime is not an application. It is a structure embedded in the operating system. If you had actually actually trashed this structure, it is likely you could not use most applications installed on your system since virtually all process/display image content in one form or another. On the other hand, The QT X Player and the QT 7 Player are both "applications." Therefore, it is most likely that all of the routines you require for FCP processing are sill available for your use—assuming you have not deleted your FCP "pro" codec components.
My recommendation would be to download and install the QT Player 7 app or MPEG Streamclip for temporary use while you try to locate a copy of the QT X Player app if you really want it. For instance, if you have it installed on a secondary Snow Leopard platform or have an external Snow Leopard start-up drive connected to your main system, then it would also contain a copy of the QT X Player which could easily be copied from one "Applications" folder to the other.

Macbook problem - this is a complicated one...

MacBook Pro - snow leopard - 15inch, 2.53ghz dual mid 2009
I've been using macs for some 20 yrs, this current machine has served me well for some 5+ years, so I consider myself an experienced user, I'm totally at home with mac gear, fitting ram, hard drives etc etc (the machine is factory standard, apart form a new hard drive fitted as an attempt to resolve these problems)
The problem started last week when the spinning beachball appeared on startup when one enters the password/selects the user. No matter what, the ball persisted. I reset, pram, nvram, smc, reinstalled all my files etc from a time machine back up, all to no avail. Any and all peripherals have been detached to check it wasn't a conflict issue there, even the apple power cable.
Days have been spent on this. I've run the apple hardware test (extended) on the utilities disk - all ok. I've run diskwarrior, techtool pro deluxe, onyx.... all find no hardware faults whatsoever - only software ones: minor file issues which have all been resolved without issue.
I've reset permissions, disk verification etc..
Then I've 100% erased the disk and reinstalled the entire system software and then it would start up, but hang once one it got part way through the numerous questions - eg: select language, country, etc..
I then installed a different hard drive - a new hitachi 1tb disk 7200rpm. At the same time I used a blower to remove any fan dust etc while the machine was open. All system software installed ok, but again it stalled with the beachball at the select country etc stages (I was not trying to transfer any data from another mac/time machine backup, rather going for a clean new install).... Faced with this failure I selected the option that I wanted to move data from a time machine back up instead and this time it worked, but again the machine hung on startup after the time machine back up had completed.
Then when starting up the machine it would hang at the password stage, or startup and then when the desktop appeared hang, or once it made it even further allowing me to boot up software programs but later froze. Now its back to hanging on the password/user startup page.
So everything has been reset, clean installs, thorough hardware testing, software conflicts ruled out as I've done totally clean installs purely from apple original dvds, rest every parameter. Run every diagnostic I can find and ruled out the idea its a secondary minor battery issue as I believe these MacBooks do not have a small battery to remember minor things rather using a capacitor charged from the main battery.
Perhaps its a very random breakage somewhere, fractured solder etc, but would prefer not to buy a secondhand tested logic board and tentatively install when the issue may not be this at all.
Finally the ram is the original apple installed units and has passed every diagnostic test...
So any ideas would be appreciated... many thanks

Hi, Kairty,
I see you're new here. This is a user-to-user forum. Apple tech support doesn't actively participate. It's a big holiday weekend for many people so, it may take a little while for someone to get over Xmas dinner, log on, see your post and know what the answer is. You can contact Apple directly using the info found through the link "Contact Us" which is found at the lower right of every page.
You might also try searching for your problem in search box that appears under the words "Search Discussions" (as opposed to the one at the very top of the page).
Happy New Years!

Bit of a tricky one ....

Ok, from my query I have this:
1,2,3,4,5,6,7,8,9
And I want to turn it into this
<table>
<tr>
<td>1</td>
<td>2</td>
<td>3</td>
<td>4</td>
<td>5</td>
</tr>
<td>6</td>
<td>7</td>
<td>8</td>
<td>9</td>
<td></td>
</tr>
</table>
now if my list now grows to this
"1,2,3,4,5,6,7,8,9,10,11,12,13,14" I want my table to include a
second row etc. How the **** do I program this. I am having such a
tough time and its reallly strating to frustrate.
If anyone can tell me how to do this. I would be over the
moon.
Many Thanks hugh

oh yes I have this code already.
<cfset Columns = 5>
<cfset CurrentColumn = 0>
<cfset RowCompleted = 0>
<cfset Rows=Int(usersview.RecordCount/Columns)>
<cfset OddColumns = usersview.RecordCount mod Columns>
<cfif OddColumns neq 0>
<cfset Rows = Rows +1>
</cfif>
<cfset Increment =
Int(usersview.RecordCount/Columns)+1>
<table border="1">
<cfprocessingdirective suppresswhitespace="yes">
<cfloop from="1" to="#rows#" index="Row">
<cfset LeftOverIncrement = 0>
<tr>
<cfloop index="Column" from="1" to="#Columns#">
<cfif Column gt (OddColumns +1)>
<cfset LeftOverIncrement = LeftOverIncrement +1>
</cfif>
<cfset CurrentRow = (Row + (Increment * CurrentColumn) -
LeftOverIncrement)>
<cfif CurrentColumn eq (Columns -1)>
<cfset CurrentColumn = 0>
<cfelse>
<cfset CurrentColumn = (CurrentColumn+1)>
</cfif>
<cfoutput>
<td><cfif (Row lt Increment or OddColumns gt 0) and
(CurrentRow lte usersview.RecordCount)>#the
value[CurrentRow]#<cfelse></cfif></td>
</cfoutput>
<cfif Row eq Increment>
<cfset RowCompleted = RowCompleted +1>
</cfif>
<cfif RowCompleted is OddColumns>
<cfset OddColumns =0>
</cfif>
</cfloop>
</tr>
</cfloop>
</cfprocessingdirective>
</table>

Bit of a weird one!

A strange problem just started happening yesterday & continues randomly. Every now & then the sides of my Desktop reduce by 8mm on the L & 4mm on the R. Whereas the desktop should cover the entire screen it is now pure black on the L & R sides. However this problem recovers all by itself every now & then. It keeps happening. Any suggestions?
Athlon XP2400
MSI KT4 Ultra
768mb RAM
MSI G4ti4200 128mb

Maybe your monitor geometry is starting to go? Are you using a CRT? I'd try hooking up a second monitor and seeing if the problem reproduces itself first.

Hi, a bit of a complicated one :)

Similar Messages

Maybe you are looking for