Hi! a little help for me!

I m new and i want to know some little information of this service...first i want to say that I m italian and I stay into an appartment on rent for about 3 months! Can i use BT FON whitout buy a modem? I want to connect with my mobile phone but i have not any pc or television or other...so i don t want buy a pakage..how can i do?
please sorry for my english and use a simple wordls! thenks!

Ciao, Sì, è possibile utilizzare BTFON finché si dispone di un wifi sul vostro laptop. Tutto quello che dovete fare è collegare al segnale e aprire il browser web. È possibile acquistare l'accesso dalla schermata di accesso. State attenti però se vedi voucher di accesso per £ 3, 5 € o 15 £ questi buoni FON e sono venduti da FON che hanno sede in Spagna. Sei best off acquistare i buoni BT Openzone.
Spero che questo aiuti, se avete problemi con i buoni chiamata 08000223322
RAID
Mi dispiace il mio italiano non è così buono

Similar Messages

Audigy 2 Tech support little help for n

Original Message Follows:
Subject: CLI - Technical Support Request
Self Description: ID(3) Advanced PC UserSupport Inquiry: ID() I am installing or using the product for the first timeProduct: Audigy 2 ZSOperating System: Windows 2000Creative Model Number: SB0240Computer Brand/Model: Home builtProcessor/CPU: P4 3.0ghzMemory: .024gigBIOS Type/Revision: Award Bios SPE000 Pro-G.ESystem Board/Chipset: GA-8IPE000/Intel 865PE Host/AGP/Controler ICH5 IO
Detailed Problem Description:I have recently made a purchase from e-bay form your company for Creative Sound Blaster Audigy 2 Sound Card http://cgi.ebay.com/ws/eBayISAPI.dll...92950&tc=photo I have install this product to go along with my Creative Labs Inspire P5800 5. speaker system. I am having the following problems.
. I can only get output from 2 speakers front left and front right.2. I cannot get my microphone to work at all. Its plugin to the proper port. It worked with the old sound card. It works on other pc's I have at my residence. So its not the microphone. I checked all the connections and they are correct. I have been to the knowledge base with no luck. I have been through the forums searching and the majority of the forum responses are users helping users with very little input from Creative labs. (disappointed)I have installed/un-installed/re-installed without any luck, the software that came on the cd. I have also retrieved the last software downloads from your web site without any luck.So either I am missing something here, or I got a defecti've sound card.
REPLY/Answers inline:
Jason, My answers are inline.
> Thank you for contacting Creative Technical Support. > With regards to the issue you are having, may I know the model and > serial number of the product you are having? It should start with CT or SB followed by 4 numbers >found on the sound card. As for the serial number, it can be found on the sticker and the ink stamp >which is printed on the back of the card. SB0240 > Below is a link that may help with the location of the model number. Thanks. Run a keyword search for > SID2456 from the link below.> http://us.creative.com//support/kb/> > For the 2 speakers output issue, may I know are you using digital or analog connection for your >speakers? I assume its an analog connection Creative Insprire P5800 as I don't have anything like a EAX control module that goes in between. Also I have no sound at all til I go to the speaker setting control panel andde-select digital output only.
I have 3 wire connection Green Line out (front) Black line out 2 (rear) and Orange line out 3 (center subwoofer) These connect from the back of the sound card directly into the subwoofer. Green (front) black (rear) orange (center subwoofer)
My old sound card RealTek`AC97 worked fine and I had sound in all my speakers. Yes I have removed the old card and un-installed the old drivers for it. Also the mircophone worked with the old sound card so I know thats not an issue. > Sorry for any inconvenience caused. > We'll need this information so that we can provide you with the correct remedy.
Reply/Answers Again Inline:
> May I know have you enabled CMSS?Yes I have this enabled, disabled and re-enabled to try and get this to work. > . Open MediaSource (Start, All Programs, Creative, Creative MediaSource, Creative MediaSource >Organizer).> 2. There should be an EAX button underneath the Record button at the bottom of the screen, towards >the left. Beside this button, there should be a small ellipsis button (. . .) that you can press. >Click on this. Doing this locks up my pc as soon as I hit the (....) tab. The pc spikes to 00% and the only thing I can do is hit the reset button on the pc to hard boot it. I have tried this several times with the same results. Note: I DO NOT have anything running in the background as anti virus programs and such. I don't even have anything like that installed on my pc. NOTE: I can press the EAX button itself to make it from high lighting green on the button to not high lighting green. This has had no effect on the problems I am having. > 3. Go to the CMSS 3D tab and check the box next to "Enable CMSS 3D" The only way I can get to this is by: Start>Program Files>Creative Media>Source>Creative Media Source Go, then the GO button>Product Settings>EAX Console. I have enabled, disabled and re-enable the CMSS 3D with no changes to my problem.> 4. Place a dot next to either CMSS or CMSS2. Whichever sounds better to you. I have tried CMSS and CMSS2, I have the same results with either enabled or even with CMSS 3D enabled or disabled. I only get sound out of 2 of my speakers. I know its not the speaker system (Creative Inspire P5800) because all the speakers worked with my old sound card. > It is important to remember that if you do wish to play a 5. encoded file, you will need to turn CMSS >off. Otherwise you might not receive each discreet channel. This has been Noted ref. to 5. encoded. But I would like to just play anything at this time and have all my speakers work.
> For your microphone, I wil need you to do a mic test.>CHOOSE THE RECORDING SOURCE> . Double click on the Windows Volume Control (generally on task bar) to load the mixer> 2. Go to Options > Properties > 3. Select adjust volume for: Recording, and hit OK> 4. Place a check mark under the proper recording source (Microphone) in the Recording Control box. Done, already checked this. And doubled checked it to make sure. > TEST RECORD THE AUDIO> . Go to Start > Programs > Accessories > Multimedia > Sound Recorder.> 2. Click the Record button (red dot)> 3. Talk into the microphone > 4. Let it record the source for a little bit> 5. Hit the Stop button (black square)> 6. Hit the Play button (single black arrow pointing right)> 7. You should now hear the audio that you recordedNo sound recorded what so ever. I tested 3 different mircophones and none worked. I ran this test on the two other pc's I have at my residence and the mircophones worked and windows recorded just fine. YesI have it plug into the proper slot. > Does it help?I wished it did. > Please get back to us on your findings. Thanks.
Reply/Answers inline:
Dear Creative Labs,DO YOU PEOPLE EVEN READ THE PRIOR CORESPONDCE FROM THE PRIOR E-MAILS SINCE YOU APPARENTLY HAVE MUTLITPLE PEOPLE WORKING THE SAME SUPPORT TICKETS.
I WILL REPLY IN ?CAPS? TO MAKE SURE YOU DON?T MISS ANYTHING THIS TIME??. MY REPLIES ARE INLINE AND IN CAPS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
> Thanks for the reply. I need you to know that SB0240 is the Sound Blaster Audigy 2. AS STATED IN MY PRIOR E-MAIL YES IT IS AN AUDIGY 2 SOUND CARD SEE INFORMATION BELOW. Support Inquiry: ID() I am installing or using the product for the first timeProduct: Audigy 2Model: SB0240Blaster Audigy 2 Sound Card http://cgi.ebay.com/ws/eBayISAPI.dll...92950&tc=photo ARE WE CLEAR ON THIS NOW? > Please try the following cleansweep and re-installation procedure, to see if it works:-> . Click START / RUN / Type MSCONFIG and press ENTER. AS STATED BEFORE I AM RUNNING WINDOWS 2000 MSCONFIG.EXE DOES NOT COME WITH WINDOWS 2000 AS DEFAULT. SO TO MAKE SURE I FOLLOWED YOUR DIRECTIONS TO THE ?T? I WAS ABLE TO GET THE MSCONFIG.EXE MICROSOFT. THE COMMON USER WOULD NOT HAVE KNOWN THIS AS THEY WOULD HAVE TRIED ABOVE AND GOTTEN AN ERROR MSG THAT MSCONFIG COULD NOT BE FOUND. > 2. Insert a check to the left of SELECTIVE STARTUP and deselect 'LOAD STARTUP ITEMS'. DONE! > 3. Select the SERVICES tab and select HIDE ALL MICROSOFT SERVICES. DONE! > 4. Uncheck all results and click OK. DONE! > 5. Click OK and reboot when prompted. DONE! > 6. Enable the WINDOWS XP STARTUP MENU by rebooting your computer and tapping F8 once >every second OR holding the SHIFT key while rebooting. I AM RUNNING WINDOWS 2000 AS STATED BEFORE, IF YOUR GOING TO USE TEMPLATES MAKE SURE THEY REFER TO THE OPERATING SYSTEM THE USER HAS. BUT F8 STILL IS THE DEFAULT KEY TO GET TO THE WINDOWS 2000 STARTUP MENU. > 7. When the menu is displayed, select SAFE MODE and press ENTER. DONE! > 8. Once in SAFE MODE, insert the sound card's installation CD and exit out of the installer DONE! > 9. Click START / RUN. DONE! > 0. Type "X:\AUDIO\DRIVERS\CTZAPXX.EXE into the OPEN field (replace X with the applicable CD->ROM dri've letter). DONE! > . Click OK. DONE! > 2. When the CREATIVE DRIVER UPDATE UTILITY opens, select DRIVER UNINSTALLATION under >UPDATE OPTION. DONE! > 3. If two out of the three options are disabled or grayed out under DRIVER TYPE, click OK. >Otherwise, select WDM. You will then be prompted to reboot, but please do not do so. DONE! > 4. Click START / SETTINGS / CONTROL PANEL / ADD/REMOVE PROGRAMS. DONE! > 5. Remove all Creative SB Audigy 2 programs. DONE! > 6. Close all windows, and reboot the computer normally (ENTER NORMAL MODE). DONE! > 7. The Audigy 2 will be detected by Windows. Cancel the ADD NEW HARDWARE WIZARD when >able. DONE! > In order to install your soundcard properly, I recommend you to ensure the following for the audio >installation and test:
>- The card is the only card installed other than the Graphics card. THE ONLY CARDS THAT ARE INSTALLED ON MY PC ARE THE SOUNDCARD AND GRAPHICS CARD WHICH IS IN A APG SLOT. > - The card is at least one empty slot away from the Graphics card. THE CARD IS ON THE 3 SLOT FROM THE TOP AND SLOT FROM THE BOTTOM WITH NO OTHER CARDS INSTALLED. >- Place the soundcard away from all the others. NO OTHER CARDS ARE INSTALLED >- That the card is seated properly in the PCI slot. YES THE CARD IS PROPERLY SEATED THIS A BASIC A+ CERTIFICATION TASK >- Move the PC's internal wires away from the soundcard. NO WIRES ARE NEAR THE SOUND CARD I.E. POWER CONNECTORS > - That the on-board sound on your motherboard is disabled through the BIOS. CORRECT THIS WAS DONE BEFORE INSTALLING THE SOUND CARD > - That the on-board gameport is disabled through the BIOS. CORRECT THIS WAS DONE BEFORE INSTALLING THE SOUND CARD >- That your motherboard BIOS is up-to-date. MOTHERBOARD IS RUNNING THE LATEST BIOS, ITS ONLY 2 MONTHS OLD. > - That the operating system is up-to-date with the latest service packs and patches. WINDOWS UPDATES ARE UP TO DATE WITH THE LATEST PATCHES > - That there are no background applications open when you attempt the solution. CORRECT AS I STATED BEFORE > - That the anti-virus program is disabled. > NONE LOADED ON THE PC AS I STATED BEFORE > - That if you are over-clocking your system, return all options to their recommended settings. I HAVE NEVER OVERCLOCKED ANY OF MY PC?S > - That you access the PC with administrator rights. CORRECT I AM THE ONLY USER > 8. Perform an installation via the CTRUN program on the CD (X:\CTRUN\CTRUN.EXE where X is the >dri've letter of your CD dri've that has the installation CD). DONE! > 9. Reboot if prompted. DONE! > 20. Please obtain the latest updates for your Audigy 2 card from our website:- http://us.creative.com//support/downloads/
DONE! > 2. Once you are prompted to OPEN FROM CURRENT LOCATION or SAVE TO DISK, select SAVE >TO DISK and download the update to MY DESKTOP.
DONE! > 22. When the file has completed the phase of being transferred to your computer, locate the file on >your desktop and double click the file. DONE! > Do a speaker and diagnostic test. Do you have 5. output? DO I HAVE 5. OUTPUT? NO STILL THE SAME PROBLEM > I also need you to check the Speaker selection setting in Start | Programs| Creative | Sound Blaster >Audigy 2 | Creative Surround Mixer and ensure that it is set to 5. Speakers. Also set 5. at the Control CORRECT SEE LINKS FOR DESKTOP PICTURES http://vibig.rachost.com/desktop/DESK.jpghttp://vibig.rachost.com/desktop/DESK2.jpghttp://vibig.rachost.com/desktop/DESK3.jpg > Panel Speaker Settings.> On speaker systems that are equipped with a Fader or Rear channel volume controls, check to see >that these controls have not been set to use the front channels exclusi'vely. CHECKED! > Do reply back to me if you are still having problems with any error messages prompted. Thanks.
> PLEASE READ! AFTER FOLLOWING THE ABOVE INSTRUCTIONS! I REFERED BACK TO THE PRIOR E-MAIL AND DID THE TEST AS REQUESTED THE RESULTS WERE THE SAME WITH MINOR FIX. > . Open MediaSource (Start, All Programs, Creative, Creative MediaSource, Creative MediaSource >Organizer).> 2. There should be an EAX button underneath the Record button at the bottom of the screen, towards the left. Beside this button, there should be a small ellipsis button (. . .) that you can press. Click on this. > > Doing this locks up my pc as soon as I hit the (....) tab. The pc spikes to 00% and the only thing I >>can do is hit the reset button on the pc to hard boot it. I have tried this several times with the same >>results. THIS NO LONGER LOCKS UP MY PC, I AM ABLE TO HIT THE (?) AND IT BRINGS UP THE EAX CONSOLE SCREEN TO ENABLE CMSS 3D THIS HAS BEEN ENABLED ? DISABLED ? RE-ENABLED WITH THE SAME RESULTS. > CHOOSE THE RECORDING SOURCE> . Double click on the Windows Volume Control (generally on task bar) to load the mixer> 2. Go to Options > Properties > 3. Select adjust volume for: Recording, and hit OK> 4. Place a check mark under the proper recording source (Microphone) in the Recording Control box. > > Done, already checked this. And doubled checked it to make sure. > TEST RECORD THE AUDIO> . Go to Start > Programs > Accessories > Multimedia > Sound Recorder.> 2. Click the Record button (red dot)> 3. Talk into the microphone > 4. Let it record the source for a little bit> 5. Hit the Stop button (black square)> 6. Hit the Play button (single black arrow pointing right)> 7. You should now hear the audio that you recorded > > No sound recorded what so ever. I tested 3 different mircophones and > > none worked. I ran this test on the two other pc's I have at my > > residence and the mircophones worked and windows recorded just fine. Yes> > I have it plug into the proper slot. THIS IS STILL AND ISSUE AS IT STILL DOES NOT WORK. THE SPEAKERS ARE STILL NOT WORKING RIGHT AS I ONLY CAN GET SOUND OUT OF THE FRONT 2 SPEAKERS.NOTHING HAS CHANGED AS WE ARE BACK TO SQUARE ONE AGAINIf someone could help me or shed some light on this situation I would be very grateful. !!!
Thanks,
Capt.

Support have to go over some things first to make sure you've tried them. If it hasn't helped, just mail them back and let them know. It sounds like like you have the settings correct (CMSS, 5. in speaker selection), so there must be something wrong in the installation or configuration of the software.
The CleanBoot troubleshooting page on Microsoft's Kbase might help, although, it sounds like you covered a clean install aswell so that would normally help.
These forums are for user-to-user interaction, rather than Support from Creative. We monitor these forums and reply to some posts, but we can't reply to every topic and offer everyone support (that's what the phone and e-mail support are for).
Cat

A little help for a newbie?

Hi, I am currently a newby in developing apps, It got to my ears that a little TV channel has a competition on creating an app to view their webpage without using safari browser...I would like to get some help with that, if that is possible!Thanks!

or, just find the PhoneBook constructor, and newthat
sucker.That depends on what the constructor does (it
shouldn't do any more than initialize the instance)
and what instance methods there are. He wants on
program to cause another one to do what's currently
in that second one's main.
I agree that in general it's probably a better idea
to creat a phone book and ask it to do things, but
just constructing one won't necessarily work for the
OP with his current code.Hmmm. I have to think about this a little. It seems to me that it depends on how much application logic resides in the main class, and how the OP wants to interface. If all he can do is call main, then he has little programmatic control, since the interface is defined by the public methods. Unless all he wants to do is start it up, and then interface by way of the GUI.

Little help for calling report from a form

hi,
I AM NOT ABLE TO CALL THE REPORT WITH THE FOLLOWING CODE. PLEASE TELL ME WHERE I AM DOING WRONG! THANKS A LOT!!
It is Oracle 9i and Reports 6i.
-> I have a form with only one BUTTON.
-> I have a REPORT with only one USER PARAMETER 'P_1' which is a number.
-> I have only one query INSIDE the report. It is "SELECT * FROM EMP WHERE EMPNO = :P_1'
-> I added the report to form in the OBJECT NAVAVIGATOR of FORM and the NAME OF REPORT is 'REOPRT4'
here is the code on the form:
================================
When_button_pressed
DECLARE
vid report_object;
vname varchar2(100);
BEGIN
vid := find_report_object('Report4');
vname := run_report_object(vid);
END;
==================================
-> the FORM and REPORT are in "c:\helloworld" directory.
-> the error I am getting is 'internal pl/sql error'
-> I WANT THE USER TO ENTER THE RUNTIME PARAMETER FOR THE REPORT AT RUNTIME, so no need to worry about supplying the parameter through code!!!
Thank You very much. I appreciate your kind help!!

I think that you have to add some code, see page 15 in this:
http://otn.oracle.com/products/forms/pdf/277282.pdf
Helena

A little help for HDMI sound output.

I have an HP Pavilion HPE Series. Pavilion H8-1214 PC
I bought an HDMI cord several months back, to hook up my TV as a second monitor (like for watching movies) and worked fine for some time up until last night when when I tried to update my drivers (like graphics) since it seemed like on certain sites or games it was slow or unresponsive (like facebook games). Now I can't get the audio to work for my TV (the HDMI output) as you can see in the screen shot I took.
http://puu.sh/9SZOT/ab1c31984d.png
I have tried returning to an older restore point - that helped temporarily until I turned my computer on today and realized I still had that problem. I have tried uninstalling that particular driver and reinstalling it - doesn't help, tried disabling and re-enabling - doesn't help.
The only way it seems to work is when I turn the TV on first and then restart my PC, but that is kind of a hassle since when I want to watch a show or movie I have to restart instead of just turning it on and setting TV as "default device" in "Playback Devices" like I did before.
Is there a way to fix this? Please help. Thanks in advance.

Hi,
Install the HP posted AMD graphics driver for your PC. It's not uncommon for HP to use a propriety graphics driver.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

A little help for my xmonad configuration???

i'm totally new with xmonad, and i'm all confused with this problem...
it says that the last statement in a 'do' block must be an expression or something...
i'm just following http://thinkingeek.com/2011/11/21/simpl … en2-conky/,
everything goes right except the "log hook" part...
i don't really know Haskell code,
thanks for the help and sorry for my bad English,
here's the code...
-- import stuffs {
import XMonad
import XMonad.Actions.CycleWS
import XMonad.Hooks.ManageDocks
import XMonad.Hooks.ManageHelpers
import XMonad.Hooks.SetWMName
import XMonad.Hooks.DynamicLog
import XMonad.Hooks.UrgencyHook
import XMonad.Hooks.FadeInactive
import XMonad.Hooks.EwmhDesktops
import XMonad.Layout.SimpleFloat
import XMonad.Layout.NoBorders (smartBorders, noBorders)
import XMonad.Layout.PerWorkspace (onWorkspace, onWorkspaces)
import XMonad.Layout.Reflect (reflectHoriz)
import XMonad.Layout.IM
import XMonad.Layout.SimpleFloat
import XMonad.Layout.Spacing
import XMonad.Layout.ResizableTile
import XMonad.Layout.LayoutHints
import XMonad.Layout.LayoutModifier
import XMonad.Layout.Grid
import XMonad.Operations
import XMonad.Prompt
import XMonad.Prompt.RunOrRaise (runOrRaisePrompt)
import XMonad.Prompt.AppendFile (appendFilePrompt)
import XMonad.Util.Run
import Control.Monad
import Data.Ratio ((%))
import System.IO
import System.Exit
import qualified XMonad.StackSet as W
import qualified Data.Map as M
-- end of import stuffs }
-- default terminal {
myTerm = "urxvt"
-- end of default terminal }
-- workspaces {
myWork = ["home", "surf", "devs", "ofce", "play", "misc"]
-- end of workspaces }
-- mod key {
myModm = mod4Mask
-- end of modkey }
-- window border {
myBord = 1
myNorm = "#272727"
myFocu = "#5387BF"
-- end of window border }
-- keybinding {
-- key to add
addKeys x = [
-- closing window
((modMask x, xK_c), kill)
-- key to remove
removeKeys x = [
-- gmrun
(modMask x .|. shiftMask, xK_p),
-- closing window
(modMask x .|. shiftMask, xK_c)
-- strip the key to remove
strippedKeys x = foldr M.delete (keys defaultConfig x) (removeKeys x)
-- merging keys
myKeys x = M.union (strippedKeys x) (M.fromList (addKeys x))
-- end of keybinding }
-- layout hooks {
defaultLayouts = tiled ||| Mirror tiled ||| simpleFloat ||| Full
where
-- tiling algorithm
tiled = Tall nmaster delta ratio
-- master window count
nmaster = 1
-- master pane portion
ratio = 2/3
-- increment/decrement resize
delta = 3/100
-- specific workspaces
miscLayout = noBorders $ Full
-- merging layout
myLayo = onWorkspace "misc" miscLayout $ defaultLayouts
-- end of layout hooks }
-- log hooks
myLogh :: Handle -> X ()
myLogh h = dynamicLogWithPP $ defaultPP {
ppCurrent = dzenColor "#ebac54" "#1B1D1E" . pad,
ppVisible = dzenColor "white" "#1B1D1E" . pad,
ppHidden = dzenColor "white" "#1B1D1E" . pad,
ppHiddenNoWindows = dzenColor "#7b7b7b" "#1B1D1E" . pad,
ppUrgent = dzenColor "#ff0000" "#1B1D1E" . pad,
ppWsSep = " ",
ppSep = " | ",
ppLayout = dzenColor "#ebac54" "#1B1D1E" . (
\x -> case x of
"ResizableTall" -> "^i(" ++ myBitmapsDir ++ "/tall.xbm)"
"Mirror ResizableTall" -> "^i(" ++ myBitmapsDir ++ "/mtall.xbm)"
"Full" -> "^i(" ++ myBitmapsDir ++ "/full.xbm)"
"Simple Float" -> "~"
_ -> x
ppTitle = (" " ++) . dzenColor "white" "#1B1D1E" . dzenEscape,
ppOutput = hPutStrLn h
-- end of log hooks
-- manage hooks {
myMana = composeAll . concat $ [
-- apps to surf
[ className =? t --> shiftWin "surf" | t <- mySurfClass ],
-- apps to devs
[ className =? t --> shiftWin "devs" | t <- myDevsClass ],
-- apps to float
[ className =? f --> doFloat | f <- myFloatClass ]
where
shiftWin = doF . liftM2 (.) W.greedyView W.shift
mySurfClass = ["Luakit", "luakit", "Chromium"]
myDevsClass = ["Geany", "Gedit", "Netbeans"]
myFloatClass = ["Gimp"]
-- end of manage hooks }
-- dzen bar
myDzen = "dzen2 -x '1440' -y '0' -h '24' -w '640' -ta 'l' -fg '#FFFFFF' -bg '#1B1D1E'"
myBitmapsDir = "/home/perud/.xmonad/dzen2"
-- end of dzen bar
-- status bar
myStat = "conky -c /home/perud/.xmonad/.conky_dzen | dzen2 -x '2080' -w '1040' -h '24' -ta 'r' -bg '#1B1D1E' -fg '#FFFFFF' -y '0'"
-- end of status bar
-- MAIN METHOD
main = do
dzenLeftBar <- spawnPipe myDzen
dzenRightBar <- spawnPipe myStat
xmonad $ defaultConfig {
terminal = myTerm,
workspaces = myWork,
modMask = myModm,
borderWidth = myBord,
normalBorderColor = myNorm,
focusedBorderColor = myFocu,
keys = myKeys,
layoutHook = myLayo,
logHook = myLogh dzenLeft >> fadeInactiveLogHook 0xdddddddd,
manageHook = myMana
-- END OF MAIN METHOD
Last edited by perud (2013-02-14 02:28:03)

Please use code tags when pasting to the boards:
https://wiki.archlinux.org/index.php/Fo … s_and_Code

Little help for a novice - Need a ps script to list user with their email only.

Hi,
I need to extract every month the user list which have their email information on it, so i don't need to extract the user services etc from the AD.
Today, i'm using this script i made :
clear-host
Import-Module activedirectory
$CurrentDate = Get-Date
$CurrentDate = $CurrentDate.ToString('dd-MM-yyyy')
Get-ADUser -Filter * -server ad.test -SearchBase "dc=ad,dc=test" -Properties DisplayName,sn,givenname,Company,Description,EmailAddress | select DisplayName,sn,givenname,Company,Description,EmailAddress | export-clixml "C:\users_$CurrentDate.xml"
But like this i have every user of the ad even the ones without email.
Is there any filter to only extract theses one ?
Thanks for your help.

Hi,
Try this:
$CurrentDate = (Get-Date).ToString('dd-MM-yyyy')
Get-ADUser -Filter "mail -like '*'" -Server ad.test -SearchBase "dc=ad,dc=test" -Properties DisplayName,sn,givenname,Company,Description,EmailAddress |
Select DisplayName,sn,givenname,Company,Description,EmailAddress |
Export-Csv "C:\users_$CurrentDate.csv" -NoTypeInformation
Don't retire TechNet! -
(Don't give up yet - 12,420+ strong and growing)

A little help for creating a procedure

Hi,
I'm new to oracle so i would really appreciate your help. Here is the scenario: i have several table in a database, in one table, let's call it table_a i have some values like: assignment, employee_id, account and so on. In another table, table_b i also have some data the is found in table_a like: employee_id, assignmnet, employee_name... and so on. I must create a procedure to check in table_a by value assignment(pk) and find what assignments are not in table_b and then insert these values in table_b, table_c.... . How do i create the comparison part?

Hi,
If It would have to insert only in table_b, then you can go for MERGE, that will be fine instead of procedure.
Other options would be
INSERT ALL
INTO table_b VALUES (<required columns>)
INTO table_c VALUES (<required columns>)
SELECT <the columns>
FROM table_a
where assignmnet_id not in (select assignmnet From table_b);
- Pavan Kumar N

Little Help For the New Bee

Hello,
though I work a lot with FCP and all the other pro applications, I have never been in a professional enough environment to have to use Compressor. I have a file that is an MPEG 4 Movie. Dimensions: 720X304. I just need to be able to put it into Final Cut Pro and edit with the best quality. How do I go about converting? I messed around with it for a while, but with no success. It seems very straight foward, but I think I am missing something. Please help if you can.
thanks,
Toolius

Hey Toolius
if i am reading this information correctly, this file's codec is a mpeg, but with AAC audio. are you SURE that you didnt leave out the 4 in mpeg4???
what is the extension of the file, *.mov, *.mp4?
if you want to edit in FCP, then all you have to do is a simple transcode to the file.
seems like you have a widescreen 16:9 (maybe 1.85 or 2.35) file.
you can do this transcode in one of two ways, via QT Pro itself, or Mpegstreamclip.
would you want to keep your video as 16:9 or 4:3?
if you want it 16:9 you have 2 options, 720x480 anamorphic or 960x540 (this is for 16:9, 1.78 FF, so yo will still have mattes).
if you want it 4:3 then you can use 720x480.
the only thing with all this is that your footage is compressed, so try to keep it as lossless as possible throughtout the whole process, like that, you minimize cascade compression (basically compressing the already compressed footage).
make sure that you also keep in mind your codec sequence, like that, you will NOT have to render this footage!~
Mikey M.

Little help for simple gallery

Hi, i use a very simple spry gallery. the xml format is this
<photos>
<photo pathtn="..." path="..." description="..." />
<photo......
<photo......
</photos>
Then on the thumbnails div i've got a spry:repeat and a
spry:setrow to set the content of the spry:detailregion which shows
the large image and the description. The gallery works very well,
but what i'd like to do is to change the aspect of the active
thumbnail...Nothing too complicated..just a thicker border ...how
could i do this?
thanks!

I don't know if this is best way to do it, but I wrapped my
thumbnails section in a div called "thumbnails" to which i applied
the spry:region="dsPhotos dsGalleries dsGallery".
From here, I entered my spry div:
<div spry:repeat="dsPhotos"
onclick="HandleThumbnailClick('{ds_RowID}');"
onmouseover="Spry.Effect.AppearFade('tn{ds_RowID}',
{duration:1000,from:100,to:20,toggle:true})"> <img
id="tn{ds_RowID}" alt=""
src="galleries/{dsGalleries::@base}{dsGallery::thumbnail/@base}{@thumbpath}"
width="24" height="24" /></div>
Then I closed the thumbnails div.
From here, I simply created a #thumbnails rule in my css
file, and changed my border like so:
#thumbnails img {
padding: 1px;
clear: none;
float: left;
height: 24px;
width: 24px;
margin-top: 5px;
margin-right: 5px;
margin-bottom: 0px;
margin-left: 0px;
border: 2px solid #CCCCCC;
Hope this helps!

Little help for the beginer

when I try to compile this program
import java.applet.Applet;
import java.awt.*;
public class OnnurTilraun extends Applet
     TextField t1, t2;
     Button b1;
     Label a1;
     public void init()
          t1 = new TextField(20);
          t2 = new TextField(20);
          b1 = new Button("Heilsa");
          a1 = new Label("Nafn:");
          this.add(a1);
          this.add(t1);
          this.add(b1);
          this.add(t2);
     public boolean action(Event e, Object o)
          if (e.target == b1)
               t2.setText("Good day" + t1.getText());
               return true;
          return false;
I get this message(Note: "Filename".java uses or overrides a deprecated API.
Note: Recompile with -deprecation for details.
Tool completed successfully)
but when I try to run the applet the appletviewer can�t start the applet so I recompile with -deprecation I get this message("filename".java:26: warning: action(java.awt.Event,java.lang.Object) in java.awt.Component has been deprecated
     public boolean action(Event e, Object o)
^
1 warning
Tool completed successfully)
What to do, I don�t know so I asking you

The warning message you get about deprecation is a warning and not a fatal error, and you may ignore it. It means that you use code that is considered "outdated", and that may (or may not) be discontinued in some future JVM. It is probably not the reason you can't run the applet. The reason appletviewer won't start the applet is hard to know without knowing what error message you get, but a wild guess is that there is some minor error in html file you use to start the applet
If you don't want to ignore the deprecation warning, do the rewrite virum suggested. As for the problem with "cannot resolve symbol", you need to import the ActionEvent class. Add
import java.awt.event.*;together with your other import statements.

A little help for a noob

I have all sorts of sounds and samples in a folder called loops. Many of these are from the AMG jam packs. I just purchased a new macbook pro and when I go to use mainstage it will not find the sounds in this folder. On my previous macbook I had used many of these sounds in mainstage. Can anyone tell me why I can not load these sounds? Is there a way to load these sounds directly into mainstage? Thanks.

that would be a really cool idea (jam along to drum loops) but I don't believe Mainstage is built for that. You can manage it fine with Logic Pro though by enabling Software Monitoring and record-enabling your guitar track while playing a loop.

Little help with complex XML data as data provider for chart and adg

Hi all,
I've been trying to think through a problem and Im hoping for
a little help. Here's the scenario:
I have complex nested XML data that is wrapped by subsequent
groupings for efficiency, but I need to determine if each inner
item belongs in the data collection for view in a data grid and
charts.
I've posted an example at the bottom.
So the goal here is to first be able to select a single
inspector and then chart out their reports. I can get the data to
filter from the XMLListCollection using a filter on the first layer
(ie the name of the inspector) but then can't get a filter to go
deeper into the structure in order to determine if the individual
item should be contained inside the collection. In other words, I
want to filter by inspector, then time and then tag name in order
to be able to use this data as the basis for individual series
inside my advanced data grid and column chart.
I've made it work with creating a new collection and then
looping through each time there is a change to the original
collection and updating the new collection, but that just feels so
bloated and inefficient. The user is going to have some buttons to
allow them to change their view. I'm wondering if there is a
cleaner way to approach this? I even tried chaining filter
functions together, but that didn't work cause the collection is
reset whenever the .refresh() is called.
If anyone has experience in efficiently dealing with complex
XML for charting purposes and tabular display purposes, I would
greatly appreciate your assistance. I know I can get this to work
with a bunch of overhead, but I'm seeking something elegant.
Thank you.

Hi,
Please use the code similar to below:
SELECT * FROM DO_NOT_LOAD INTO TABLE IT_DO_NOT_LOAD.
SORT IT_DO_NOT_LOAD by WBS_Key.
    IF SOURCE_PACKAGE IS NOT INITIAL.
      IT_SOURCE_PACKAGE[] = SOURCE_PACKAGE[].
LOOP AT IT_SOURCE_PACKAGE INTO WA_SOURCE_PACKAGE.
        V_SYTABIX = SY-TABIX.
        READ TABLE IT_DO_NOT_LOAD into WA_DO_NOT_LOAD
        WITH KEY WBS_Key = WA_SOURCE_PACKAGE-WBS_Key
        BINARY SEARCH.
        IF SY-SUBRC = 0.
          IF ( WA_DO_NOT_LOAD-WBS_EXT = 'A' or WA_DO_NOT_LOAD-WBS_EXT = 'B' )
          DELETE IT_SOURCE_PACKAGE INDEX V_SYTABIX.
        ENDIF.
ENDIF.
      ENDLOOP.
      SOURCE_PACKAGE[] = IT_SOURCE_PACKAGE[].
    ENDIF.
-Vikram

I've added a pdf to itunes and i want to change it so its visible with an album (digital booklet). But for some reason, when i click get info, its all greyed out and the little box for read only is unticked. please help - urgent! thanks

I've added a pdf to itunes and i want to change it so its visible with an album (digital booklet). But for some reason, when i click get info, its all greyed out and the little box for read only is unticked. please help - urgent! thanks

Hi
My first thoughts are
• iMovie ill behaving - Trash the iMovie pref file - use to set things right
• in reg. to Photos - Did You change iPhoto Photo Library - Then iMovie get's lost as it peeks into iPhoto on start up to see where photos are stored. Set iPhoto back to first Photo Library (when iMovie is not running) then start iMovie.
Yours Bengt W

Need a little help new to mac

Need a little help I'm new to Mac.. i have had my ibook for over a year now and i like it a lot, but some times my usb post dies on my for a couple days maybe weeks. Ill have my ipod connected and when i go to plug in a flash drive. It doesn't detect my ipod anymore and my usb port don't work. it says that they were "removed improperly" and now they are not working again..i have tried to reinstall the whole os again and that doesn't work i don't have the hardware test disk so i don't know what could be the problem i know its not the logic board is there any test i can do to it to find out the problem its an ibook late 2001... there is no reset button on it. i tried to hold in the space bar and now when i boot up i get prompt to this screen that shows the world and then a folder with a ? mark but then after a few sec it boots right up im a mess need some help

+it says that they were "removed improperly"+
You have to go to the iPod's icon on your computer (or the flash drive's icon), select it and eject it there before removing it. Otherwise, data can be corrupted and/or lost. Repeatedly removing it without ejecting it from the desktop can cause it not to be recognized any longer.
If your iBook is a "late 2001" model. It should have a reset button. Check out the chart here to make sure which model iBook you have:
http://support.apple.com/kb/HT1772?viewlocale=en_US
+i get prompt to this screen that shows the world and then a folder with a ? mark but then after a few sec it boots right up+
It's trying to find a network volume from which to boot.
Once it's booted up, go to System Preferences > Startup Disk, and select your Mac OS X startup volume. Then close System Preferences. The next time you start up, it should start up without looking for a network volume.

Hi! a little help for me!

Similar Messages

Maybe you are looking for