Hi  about country grouping

is there any way to search employees that assigned in country grouping 99?

Hi,
Go to PA0003 and use field VIEKN. This always has country grouping value of employee.
Thanks,
Chiranjeevi.

Similar Messages

  • 'No assignment of payroll data to BW month for country grouping 99'

    hi gurus,
    i am getting the error 'No assignment of payroll data to BW month for country grouping 99'
    to solve this i went to
    SBIW>Settings for Application-Specific DataSources (PI)->Human Resources->Payroll Plug-In>Assignment of Payroll Data to BW Month
    i am choosing country 99 and here i get 4 options which should i choose.
    1.payment date of for- period
    2.end date of in -period
    3payment dare of for -period
    4payment dare of  in- period
    regards
    man

    Hi,
    As per the settings in the SBIW code in R/3 , we can go with a single Time based assignment for a Country at a time.So we can not use both IN Period and FOR period for the same country code.
    For more information, refer the below path.
    SBIW>Settings for Application-Specific DataSources (PI)->Human Resources->Payroll Plug-In>Assignment of Payroll Data to BW Month
    Under human resources.....go to payroll and assignment of payroll data to BW
    if you do not get...use Cntl + F and enter payroll..
    you will get
    in Assignment of payroll data to BW Month, after giving country grouping, what type of period assignment should be given. in R/3 dev side when i have chosen
    1.End of For period, extracted 972 records
    2. End of In period, extracted 1023 records
    3. Payment date of For period, extracted 972 records(just the same as in the first option)
    4.Payment date of In period, extracted 0 records
    Do u know more about these options??? one more thing to clarify on this. While doing payroll data extraction, do we have consider or say give "Define time frame for transfer", if that is compulsory then i have done that by givigng
    Earliest date as 01.01.2005
    Latest date as 31.12.2005
    but in the info package selection i have given to extract 01.01.2005 to 28.02.2006 and it has extracted successfully even 2006 records which means that though we define time frame, extraction is independent of this time frame, am i correct???
    Hareesh

  • I had 41 tabs open in about six groups over the last year and a half and I just close them and exited Firefox. Is there any way to get them back?

    <blockquote>Locking duplicate thread.<br>
    Please continue here: [[/questions/856718]]</blockquote>
    I had 41 tabs open in about six groups over the last year and a half and I just close them and exited Firefox. Is there any way to get them back?
    Also, is there any way to save a group or an open session and then restore it later?

    History menu, if it was destroyed in the last session
    then use "Restore Previous session:" and then restore all windows also from the history menu.
    If done in this session try the restore all windows under the history menu.

  • Copy wage type from one country grouping to another

    Hi,
    How can I copy a wage type on transaction PU30 from one country grouping to another, where wage type group is 00TR (Trip costs)? I need this copy for Finland, because it doesn't have this wage type group.
    Thanks.
    Sónia

    Hi Sonia,
    we are facing a similar issue. Kindly let us know how you were able to copy the wage type group 00tr and also the model wage types for travel expenses.
    would appreciate your immediate reply.
    thanks & regards
    rao

  • How to change country grouping of Wage Type

    Hi Experts,
    I am facing problem in scenario where I am creating a new Wage Type by copying it through the WT in the country grouping 08 - UK. but I want the new WT should appear under the country grouping 27 - HK. We have asked client to give the WT from country grpng HK but thy said it need copied thr WT availabale in country grpng 08.
    Now I need to change the country grpng of newly copied WT so that i can assign it to expense type which falls under country grpng 27.
    Please can anyone help me in changing country grpng for WT.
    Thanks in advance.
    Priyanka Dhuke

    Hi Venkat,
    I was doing that steps only. But my problem is diffrent.
    As per u r example, I need create wage type YYYY under cntry grpng 27 by copying wage type XXXX which is under cntry grpng 08. When I'm cratng WT YYYY by cpoyng it frm wt XXXX it comes under 08 only where as i want tht under 27.
    if i select cntry grpng 27 while gng into OH11 then i'm unable to get wt XXXX in the Original Wage Type field.
    Hope this clear to you.
    Thanks
    Priyanka Dhuke

  • To get the company code and country grouping attached to a position

    Hi everyone,
    I have a position and I need to get the company code and the country grouping that this position is attached to. Could you kindly suggest an FM or a class which would fetch the above data keeping in mind the inheritance tree. That is, if the company code is not maintained in HRP1008, then it should look for the same in the Org Unit that this position belongs to and so on..
    Any help will be greatly appreciated.
    Regards,
    Alpana.

    Hi
    Check the A011 relationship of the position and get the cost center, from cost center you can get the company code and country grouping from Cost Center Master CSKS.
    ~~~Ganesh Kumar K.

  • A question about cache group error in TimesTen 7.0.5

    hello, chris:
    we got some errors about cache group :
    2008-09-21 08:56:15.99 Err : ORA: 229574: ora-229574-3085-ogTblGC00405: Failed calling OCI function: OCIStmtFetch()
    2008-09-21 08:56:15.99 Err : ORA: 229574: ora-229574-3085-raUtils00373: Oracle native error code = 1405, msg = ORA-01405: fetched column value is NULL
    2008-09-21 08:56:28.16 Err : ORA: 229576: ora-229576-2057-raStuff09837: Unexpected row count. Expecting 1. Got 0.
    and the exact scene is: our oracle server was restart for some reason, but we didnot restart the cache group agent. then iit start appear those errors informations.
    we want to know, if the oracle server restart, whether we need to restart cache agent?? thank you..

    Yes, the tracking table will track all changes to the associated base table. Only changes that meet the cache group WHERE clause predicate will be refreshed to TimesTen.
    The tracking table is managed automatically by the cache agent. As long as the cache agent is running and AUTOREFRESH is occurring the table will be space managed and old data will be purged.
    It is okay if very occasionally an AUTOREFRESH is unable to complete within its defined interval but if this happens with any regularity then this is a problem since this situation is unsustainable. To remedy this you need to try one or more of:
    1. Tune execution of AUTOREFRESH queries in Oracle. This may mean adding additional indexes to some of the cached Oracle tables. There is an article on this in MetaLink (doc note 473493.1).
    2. Increase the AUTOREFRESH interval so that a refresh can always complete within the defined interval.
    In any event it is important that you have enough space to cope with the 'steady state' size of the tracking table. If the cache agent will not be running for any significant length of time you need to manually cleanup the tracking table. In TimesTen 11g a script to do this is provided but it is not officially supported in TimesTen 7.0.
    If the rate of updates on the base table is such that you cannot arrive at a sustainable situation by tuning etc. then you will need to consider more radical options such as breaking the table into multiple separate tables :-(
    Chris

  • Reg: Adding Country Group 99 for Infotype 9

    Hello Guru's,
    Can anyone help me with adding a New Country to Infotype 0009 (Bank Details).
    1. In Component FPM_OVP_COMPONENT - Application HRESS_A_PERSINFO - Created a Application Configuration(AC)
    2. Started the AC and gave Component Configuration(CC) to go to the applications for Bank Details
    3. Go to Edit Page -  Bank Details edited the Wire Schema for HRESS_CC_PER_DTL_BANK_XX to use Custom Config id created for FPM_FORM_UIBB and FPM_LIST_UIBB
    4. In the General Settings - Floorplan Settings - Application Controller Settings - Changed the Configuration Name to Z configuration name which was created for Component HRESS_C_PERSINFO_CONFIG
    5. Component HRESS_C_PERSINFO_CONFIG is used to link the custom Component Configuration created where the masking is done.
        Created 2 Component Configuration for FPM_FORM_UIBB for US and UK and within the Component Configuration created for HRESS_C_PERSINFO_CONFIG replaced to open the link for US and UK.
    6. Component Config for HRESS_C_PERSINFO_CONFIG is missing the configuration for Country Grouping 99, so created an entry for Other Countries and assigned the US Component Configuration to open.
    Note 2035081 - How to add a custom infotype to ESS 'Personal Profile' in WD ABAP
    I couldn't find any document or note to add a country to Infotype.
    Please help me.
    Thanks,
    Pramod

    Hi Siddharth Rajora,
    When using GENIL_MODEL_EDITOR to add the Dependent Object and activating the changes, it is giving error on other Dependent Objects which are not been touched.
    Below is the error I am getting when saving the entry.
    Let me know if there is anything else I am missing.
    Thanks,
    Pramod

  • HT204150 I somehow have about 100 group name in my contacts and I want to highlight and delete them all, there is nothing in them , I don't know how they got there but with iCloud they are on all devices

    IN my contacts under groups, i have about 100 Group names listed and they are empty, I never created them and they are in all our devices, is there a way to delete them without doing one at a time?

    No way to get rid of them at all?  Or are you saying I have to do it one by one?  Thank you

  • Any one have any information about Security Group to send it to me

    any one have any information about Security Group to send it to me
    what is it and how can we use it in our work

    Have a look in the general R12 MOAC and FA concepts.
    With security groups, you can defined a set of organizations with a shared access.
    E.g. you defined one Secruity groups and assigned in these group 5 organizations.
    The security group is assign to a responsibility.
    You have access to these 5 organizations over one responsibility, you must not change the responsibility, if you will enter transactions for a other organization.

  • From which infotype we get details about empoyee group ,subgroup company co

    From which infotype we get details about empoyee group ,subgroup company code.  based on the selected job position for new employee.

    Hi Aruna,
    If i can understand your question better, when we do the hiring how to fetch the default EG/ESG/Co.Code/PSA etc....based on the input of position...
    When you create position in OM; also create
    1. Infotype 1008 - Account assignment - To Fetch Co. Code, PA, PSA, Controlling area
    2. Inotype 1013 - EG/ESG - To Fetch Emp Group/Emp SubGroup
    Now when you run the hiring action, on IT0000, input the position and hit an enter key...this will call the related values (if integration is active).
    Good Luck !!!!
    Kumarpal Jain.

  • Question about Everyone Group in SharePoint 2013

    Hi,
    I have couple of question about EVERYONE group below,
             - As per the best practice which Group we should use instead of EVERYONE group in Sharepoint ?
             - What is the difference between Everyone and All Authenticated Users Group
    We have added Everyone Group in different sites, now the question is if we hide this group showing up in sharepoint people picker, is there any impact interms of current site?
             - Is there any way we can hide Everyone group showing up in the people picker only for the site / Site Collection level.
    Please help.
    Thanks
    srabon

    There is no functional difference between the Everyone group and All Authenticated Users (after Active Directory has been upgraded to Server 2003 native schema).
    I'm not aware of any function to hide the group from the People Picker.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • ESS/MSS for International Country grouping

    Hi all,
    Scenario: We are implementing Portal ESS/MSS on ECC6 and have loaded the Best Practices with the below components.
    SAP NetWeaver Portal 7.0 SP12 with the following additional software components
         BP ERP05 Common Parts 1.0 SP08 (BP_ERP5COM)
         BP ERP05 ESS 1.0 SP08 (BP_ERP5ESS))
         BP ERP05 MSS 1.0 SP08 (BP_ERP5MSS)
         SAP ESS 600 SP08 (SAP_ESS)
         SAP MSS 600 SP08 (SAP_MSS)
         SAP PCUI_GP 600 SP08 (SAPPCUI_GP)
    Now, the ESS and MSS is to be implemented for a Country Grouping 99 - International and not any specific country.
    Problem: The iViews are not loading for International, when the R/3 config setting is for 99. While it seems to be calling the right iViews for 10 - USA or 12 - Belgium.
    Can you please assist on how to link up the Users to the roles and correct iViews.
    Thank you.
    Sandeep

    Hi Anil,
    Steps in brief:
    0. Once you have implemented the Busin. Packages from SAP you will get all the Portal Content which is country specific. This is the same content being called from R/3 using country specific resources.
    1. Go to R/3 -> Pers Admin -> ESS -> General Settings -> Home Page for SS -> Services -> Define Country Srvcs.
    Go into Define Country specific srvcs and you will see the view V_T7XSSSERSRVCG
    2. This table contains all the country specific implementations offerred by SAP. You can use some of these and copy/create for CGrpng 99 as below. This should be based on what services you want to use on ESS.
    EMPLOYEE_PERSINFO_ADDRESS         99    EMPLOYEE_ADDRESS_BE_SERVICE
    EMPLOYEE_PERSINFO_ADDRESS05       99    EMPLOYEE_ADDRESS_BE_SERVICE05
    EMPLOYEE_PERSINFO_BANK            99    EMPLOYEE_BANK_BE_SERVICE
    EMPLOYEE_PERSINFO_BANK05          99    EMPLOYEE_BANK_BE_SERVICE05
    EMPLOYEE_PERSINFO_FAMMEMBER       99    EMPLOYEE_FAMMEMBER_BE_SERVICE
    EMPLOYEE_PERSINFO_FAMMEMBER05     99    EMPLOYEE_FAMMEMBER_BE_SERVICE05
    3. Also make sure your CGrpng in Pers Area/ PSA is set to 99, basically Employee shold belong to 99.
    Hope this helps in figuring out a few more things !!
    Good luck
    ~ Sandeep

  • Problem with HRFORM for country grouping 40.

    Hello Everybody,
    I have created HR Form ZSAP_PAYSLIP_IN for India (Country Grouping = 40 ) copied from standard HR form SAP_PAYSLIP (for Country Grouping 99). The DDIC structure /1PYXXFO/ZSAP_PAYSLIP_IN and the smartform ZPYXXFO_ZSAP_PAYSLIP_IN are generated succefully and both are activated. But while trying to generate the HR form I am getting the following error "Generated print program contains a syntax error". In the program /1PYXXFO/ZSAP_PAYSLIP_IN_PRNT its giving error in this line
    NODES:   PAYROLL     TYPE PAYIN_RESULT.
    Please help.
    Thanks in advance.
    Debasis

    That's my guess, as it worked for me:
    It doesn't compile, because there's a bug in the structure of the PNP logical database.
    Payroll result structure specific to your country is not listed as a 'possible type' for LDB node 'Payroll'.
    You can correct it easily in tracaction SE36. Choose PNP, tab: 'Structure'.
    Double-click on 'PAYROLL'. Click on 'Possible types'.
    Add country-specific structure (PAYIN_RESULT).
    Tell me what happened
    PS. Be aware that this is a modification to the system and you need a key for this object.
    Message was edited by: Jacek Wojciechowski

  • Personal Data and Address for Country Grouping 99 - error on ESS

    Hello All,
    I have configured personal data and address infotypes in ESS for the country grouping 99.
    I have done the following config
    1. Assign Screen Structure to Infotype Versions
    2. Define Active Subtypes and Use Case
    3. Define Country-Specific Applications
    4. Created a Z service and then assigned this service to subarea.
    I made use of US service and copied to z.
    after the config when i log on to the portal and check the personal data or address links am getting the error:
    An exception occurred that was not caught., error key: RFC_ERROR_SYSTEM_FAILURE
    the st22 dump is
    Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED_NO
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
    caught in
    procedure "HRXSS_PER_CLEANUP" "(FUNCTION)", nor was it propagated by a RAISING
    clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    You attempted to use a 'NULL' object reference (points to 'nothing')
    access a component.
    An object reference must point to an object (an instance of a class)
    before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.
    I searched in the forum but still am unable to figure it out where i am wrong or missing any config or any other technical error.
    Can any one pls help me

    http://wiki.sdn.sap.com/wiki/display/ERPHCM/HowtoReuseCountryspecificapplicationsforMolga99
    check the steps in above link
    and also please check with some standard country like india 40 or usa 10 what use cases and time constraints have been set
    INFTY - Now specifies the infotype.
    USECASE - Corresponds to the value in the table V_T7XSSPERSUBTYP.
    ZEITB - Corresponds to the value in the table V_T591A (V_T582A).
    Page 2
    SUBTYPE_TAB - Here, you will find a list of the subtypes that have
    already been checked and that are correct.
    You then find the subtype in METADATA-SUBTY. However, you must move up
    one subroutine in the call hierarchy in advance to do this.
    This data makes it easy for you to identify the infotype and the subtype
    and correct the inconsistency by making entries in the tables mentioned.
    ie
    T_cd:SE24 >>CL_HRPA_PERNR_INFTY_XSS >> CHECK_USECASE_WITH_CONSTRAINT >>
    for
    usecase = A1, A4, B1, B4 (table V_T7XSSPERSUBTYP)
    you need to have
    zeitb = '1' OR zeitb = '2' (table V_T591A)
    for
    usecase = A2, A3, A5, B2, B3, B5
    you need to have
    zeitb = '2'
    for
    usecase = A6, B3
    you need to have
    Zeitb = '3'

Maybe you are looking for