Hi,about http receiver adapter.

i use http receiver adapter.
the message was sent from send to receiver via http adatper of integratio engine.
but how should i get payload of message?
i can not get the payload data in receiver application.
i set prolog as "&loaderXML=".
and then the parameter name of payload is "loaderXML"
but i can not get the parameter name "loaderXML" from http reques

Tcode - Sxmb_moni go to , Double click the message - HTTP receiver one, Right side --go to - Request Message Mapping ..go for the pay load content,
HI.
there are not "Request Messge Mapping" entry in right side.

Similar Messages

HTTP receiver Adapter configuration

Hi All,
I want to post an XML message using HTTP Receiver Adapter for my BPM scenario (Idoc to HTTP service)
The receiver has Oracle gateway and it expects message in following format.
HTTP Header
 HttpVersion: HTTP/1.1
 Authorization: Digest username=myusername,
 realm=[email protected],
 nonce=dcd98b7102dd2f0e8b11d0f600bfb0c093,
 uri=/dir/index.html,
 qop=auth,
 nc=00000001,
 cnonce=0a4f113b,
 response=6629fae49393a05397450978507c4ef1,
 opaque=5ccc069c403ebaf9f0171e9517f40e41
 Contentlength: 12345
 Contenttype: text/html
HTTP Body
 TRANSPORT_PROTOCOL=OXTA
 TRANSPORT_PROTOCOL_VERSION=1.0
 REQUEST_TYPE=SEND
 MESSAGE_ID=A1234567890ZZ0987654321
 MESSAGE_TYPE=XML
 MESSAGE_STANDARD=OAG
 TRANSACTION_TYPE=PO
 TRANSACTION_SUBTYPE=PROCESS
 DOCUMENT_NUMBER=12345
 PARTYID=9999
 PARTY_SITE_ID=8888
 PROTOCOL_TYPE=HTTPSOXTA
 PROTOCOL_ADDRESS=HTTPS://www.me.com/servlets/oracle.ecx.oxta.
 transportAgentServer
 USERNAME=myusername
 PASSWORD=myloginpassword
 ATTRIBUTE1=
 ATTRIBUTE2=
 ATTRIBUTE3=
 ATTRIBUTE4=
 ATTRIBUTE5=
 PAYLOAD=<xml ... ...>
I think this is not a typical HTTP URL type of format, is it?
And I am not sure how I can build the message. Where do I put the parameters like TRANSPORT_PROTOCOL, TRANSPORT_PROTOCOL_VERSION, REQUEST_TYPE etc in the HTTP adapter?
Also is there any place where I can see the final actual XI message that is sent to HTTP service?
Any help will be really appreciated.
Thanks and regards,
Rahul.

Hi Rajeev,
The receiver system should have the details about the content type it expects. I got that from the team who monitors our receiver system.
The HTTP Body of HTTP adapter is made up of PrologPayloadEpilog.
So I added the paramter list that receiver system expects as part of the Prolog. Refer to the HTTP body that I have posted in my earlier message. Out of that till ".....Payload=" is added to Prolog and XI then appends actual payload to it.
To be precise -
TRANSPORT_PROTOCOL=OXTA&TRANSPORT_PROTOCOL_VERSION=1.0&MESSAGE_TYPE=XML&MESSAGE_STANDARD=UNIVERSAL&TRANSACTION_TYPE=XXXE&TRANSACTION_SUBTYPE=ORDER_I&DOCUMENT_NUMBER=PO12345&PARTY_SITE_ID=ESAP_ORDER_I&USERNAME=***&PASSWORD=**&PAYLOAD=
So in the end it worked out well.
Cheers,
Rahul.

Remove namespace alias for HTTP receiver adapter

hello all,
I have a scenario, IDOC->XML (HTTPS). Standard output of PI has ns0: as prefix for each xml tag (ns0 alias for namespace)
I want to remove the namespace alias while preserving the namespace in the output. So removing namespace reference in external definition is not a option.
Is there any way to use XMLAnonymizerBean for HTTP receiver adapter? What are other alternatives (java mapping)?
Thanks,
sachin

Thanks stefan, prateek.
Prateek: I checked this blog earlier. It talks about inbound processing. My scenario is outbound HTTP and I am not sure how I can use specific adapter service as mentioned in blog in outbound case as other scenarios are using standards adapter_plain service.
Stefan: I will try this approach.
regards,
sachin

Dynamic URL for HTTP receiver adapter

Hi all,
when the XI send the http request to the target system, the format maybe like this:
header + body the body is including: Prolog, payload and Epilog
here is about the target system have a 'input' parameter(maybe string type)
is it possible to pass the 'head + body' these value(or maybe the whole http request message) into input
i mean is it possible to set the dynamic URL for http receiver adapter like this:
http://host:port/path?input=<the header and body>
i have searched the blog Dynamic Configuration of Some Communication Channel Parameters using Message Mapping
Link:[/people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping]
and the similar threads in the forum
please give me some advice
thanks in advance

When a HTTP server requests the whole message as URL parameters, then I assume that the server also requests an HTTP GET, which is not supported by XI.
Could you check this?
Regards
Stefan

HTTP Receiver Adapter payload as single line plain text with out any tags.

Hi PI experts,
I have a strange problem in http receiver adapter.
Sender RFC (SAP) Receiver: HTTP.
Receiver system expects the output from XI in the below format in a single line plain text with out any tags in the payload. and the content type should be application/x-www-form-urlencoded
Group=Test&Sentinel=Web%20Server&Facility=5345&Order Number=XT-XWHM-Y-NA&Serial Number=123456&@LABEL_QUANTITY=5&@LABEL_NAME=111114_Q
Is there any way to achieve this using http receiver adapter. Business is not ready to accept the output from XI not even in a single element instead they only need it as a JUST a plain text.
Appreciate early response on this.
Thanks in Advance,
Jitender

Dear Ola,
Could you elaborate how you achieved in catching the response data from the receiver in case of HTTP receiver adapter?
The target service is not a WebService but some python script that must to receive some paramters via POST request.
HOW can I post this parameters?
Here you entered the fields of the message type of the request in the header parameters of the receiver adapter? Thats fine.
But what about the message type and vice versa of the response from the receiver?
Regards
Rebecca

HTTP Receiver adapter with post

Hello,
I have following scenario.
XI (http receiver adapater) -
> 3rd party web based application.
The 3rd party application expects XI payload to be part of URL with POST Method.
When HTTP receiver adapter sends request to 3rd party application, the URL looks like as follows.
http://myserver:6789/myapplication/name1=value1&name2=value2&.....&name27=value27
I looked at HTTP receiver adpater document on SDN. I see some attributes such as headerfiled1, headerfiled2..... headerfield6 and urlfield1....urlfield6. I have about over 25 fields to be passed with URL.
Now I have following questions.
1. How to make XI payload as name value pairs and part of URL.?
2. I think the default for http adapater is GET, How to configure http adaper to use POST?
I appreciate your help.
Thank you,
Balaji

> 1. How to make XI payload as name value pairs and part of URL.?
You should create the whole URL in a user defined function in mapping.
> 2. I think the default for http adapater is GET, How to configure http adaper to use POST?
HTTP adapter (and SOAP adapter) use HTTP POST. GET is not supported.
Regards
Stefan

When i send a test message throw the RWB for Http receiver adapter it is giving the error "Error in processing caused by: com.sap.aii.adapter.http.api.HttpAdapterException: ERROR_SOCKET_TIMEOUT, Read timed out"

when i send a test message throw the RWB for Http receiver adapter it is giving the error "Error in processing caused by: com.sap.aii.adapter.http.api.HttpAdapterException: ERROR_SOCKET_TIMEOUT, Read timed out"

Hi, Michal
I have read your Weblog. It makes sense to me. Thanks a lot for your help! However, I still have some questions and listed them as following. Could you please help to answer them?
Q1: I am new to SAP-XI. So I have no idea about TCODE-SXMB_ADM. Could you introduce more details about it?
Q2: The XI system I am using is running on SAP-ICC's machine. The tools I can use are:
1.Builder for Integration Repository
2.Builder for Integration Configuration
3.System Landscape Directory
4.Runtime Workbench
5.Administration System (for Repository, Directory, Runtime)
Please note that I do not have a complete control on this SAP-XI. Do you think whether or not I can set the timeout parameter by following the instructions provided in your Weblog?
For more details about my SAP-XI, please access the following Web page:
http://iccxi.sap.com:58000/rep/support/admin/index.html
Q3: The following messages are extracted from the SAP-XI. Wish they are hepful to solving my problem.
2006-06-19 05:12:16 Success The message was successfully received by the messaging system. Profile: XI URL: http://iccxi.sap.com:58000/MessagingSystem/receive/AFW/XI
2006-06-19 05:12:16 Success Using connection AFW. Trying to put the message into the request queue.
2006-06-19 05:12:16 Success Message successfully put into the queue.
2006-06-19 05:12:16 Success The message was successfully retrieved from the request queue.
2006-06-19 05:12:16 Success The message status set to DLNG.
2006-06-19 05:12:16 Success Delivering to channel: ValidationRequestHandlerServiceChannel
2006-06-19 05:12:16 Success SOAP: request message entering the adapter
2006-06-19 05:12:37 Success SOAP: call failed
2006-06-19 05:12:37 Error SOAP: error occured: java.net.ConnectException: Connection timed out: connect
2006-06-19 05:12:37 Error Exception caught by adapter framework: Connection timed out: connect
Thanks
Menghua Li

Plain http receiver adapter question

Guys,
Is there any way to see the actual https request that I am sending out with the Plain http receiver adapter?
I am getting back an application level error response, but not sure what is wrong with my message, I would like to see it the way it was sent out.
I know about SMICM where I can look at the trace file but it doesn't show me the actual https request - unless I'm missing something.
Thanks a lot,
Viktor

Have you tried with some sniffers like TCPGateway.
/people/stefan.grube/blog/2007/03/29/troubleshooting-soap-http-and-mail-adapter-scenarios-with-tcpgateway
Regards,
Prateek

Is it possible to debug "CL_HTTP_PLAIN_OUTBOUND" FROM HTTP RECEIVER ADAPTER

Hi All,
In my PI interface the data from R/3 ( using abap proxy ) is getting posted on a external server using HTTP receiver adapter .
I assume that it triggers this class when you run the HTTP receiver adapter -CL_HTTP_PLAIN_OUTBOUND
Please let me know how can i enable debugging for triggering this class.
Please let me know the steps to debug this class by triggereing from SAP PI system ( when we run the interface on PI system )
Regards,
Reddy

Hi ,
i am not sure about this,i wolukd prefer developing JAVA Proxy or File Adapter . try this code it read the data from website, try in you stand alone application,it is able to read or not.
you will face two problems,you have to convert CSC file to XML it is not possible in HTTP Adapter,
import java.lang.*;
import java.util.*;
import java.net.*;
import java.io.*;
class URL2AC
        public static void main(String args[]) {
       try {
          URL url = new URL("http://www.XXXXXXX.com/raj.txt");
          URLConnection uc = url.openConnection();
          BufferedReader in = new BufferedReader(new InputStreamReader(uc.getInputStream()));
          while (in.readLine()!=null)
               System.out.println(in.readLine());
       catch(Exception e) {
          e.printStackTrace();
Regards,
Raj

Hi! I need steps for HTTP Receiver adapter

My scenario is like this:
HTTP(HTTP Sender adapter)->XI->File(File adapter).
For this Iam sending the data as payload in the body of HTTP. Now What am i going to do is the opposite of above scenario:
File(FileAdapter)->XI->(HTTP Receiver Adapter)HTTP.
I would like to know what are the steps to transfer a file(xml) from File adapter to XI and from there to Http.
How to send the data using File adapter. Please suggest me some steps.
Hoping a quick response!!!
Thanks in advance!

Hi Datta,
For a HHTP -> XI -> FILE Scenario:
DESIGN:
1. Create DataTypes for source and Destinations. Create elements for all the text fields of your HTTP Client so that they can all be mapped into the destination file
2. Create MessageTypes for the two datatypes.
3. Create Message Interfaces. The One for HTTP is the sender, Asynchronous ( as no response is expected) and one for File is receiver, asynchronous.
4. Do the mapping. It will be mostly a one to one mapping of the fields.
5. Create the Interface Mapping.
Configuration:
1. Import your Business System under your Configuration Scenario.
2. Create 2 communication channels. One for Http as a sender and one for File as a receiver.
Check these links for the configuration part.
http://help.sap.com/saphelp_nw04/helpdata/en/43/64db4daf9f30b4e10000000a11466f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/44/79973cc73af456e10000000a114084/content.htm
3. Do the Receiver Agreement for file. HTTP doesnt need a sender agreement.
4. DO the Receiver Determination and Interface Determination.
Weblog which talk about the same scenario:-
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - although this weblog is
aimed at explaining the sync-async bridge.. Sriram has taken http-to-file scenario as the example
(use case) and explained it...
Check this SDN tv demo, it has detail of HTTP adapter setup.
https://media.sdn.sap.com/SDNTV/main.asp?mediaId=107
Refer to this link for adapter settings.
http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
You should also have a HTTP client to send message to XI. In the connecting parameters to XI u have to use the URL in the pattern mentioned by Alex. U have to give all the configuration details in the URL.
Regards,
Abhy
Message was edited by: Abhy Thomas

HTTP Receiver Adapter - delete ?xml version="1.0" encoding="UTF-8"?

Hi,
Is it possible to delete the part below when sending an HTTP request through HTTP receiver adapter without any java/abap/xslt mapping?
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_SELL xmlns:ns0="http://test.com/Sell">
Thanks
Arman

Hi,
<?xml version="1.0" encoding="UTF-8"?>
Specifies that the given message is xml
<ns0:MT_SELL xmlns:ns0="http://test.com/Sell">
Specifies its a MessageType of the payload, without this that message is not identifies and is not processed. Its manditory to have these. Other wise error will raise.
Regards,
Prasanna

Manipulate the URL in HTTP receiver adapter possible?

hello together,
i have an HTTP receiver adapter. To the parameters which i can tick in XI as default (sender party, sender service, ....) i want to add some parameters too.
who can i do that? i have read the weblog from william li. i tried to change the parameter link the comments at the end of the blog (see kurt rasmussen) but nothing happend..... the parameters are not available....
can somebody help me?
thanks a lot
alex

hello michal,
yes, i did. i took the information from http://help.sap.com/saphelp_nw04/helpdata/en/43/64dbb0af9f30b4e10000000a11466f/content.htm and tried to put some special information to URL. nothing to see.
is it mandatory to use a mapping to fill the URL parameter fields, isn't it??
i am using a port sniffer to see the URL and the fields (parameters) in it.
thanks a lot.
alex

HTTP Receiver Adapter

Hi,
I am working on a scenario, where I am posting xml message on https url, for which I am using HTTP receiver adapter.
I have created RFC destination of type 'G' in sm59 to make an https call, where I have provided following details:
In Technical Settings:
Target Host - <Hostname>
Service No. - 443
Path Prefix - <url path>
Logon Security:
SSL - Active
SSL Client Certificate - Default SSL Client (Standard)
UserName - <Username>
Password - <Password>
I have used this RFC destination in 'HTTP Destination' of HTTP receiver adapter.
When I test this interface, I am getting this error.
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_CLIENT</SAP:Code>
<SAP:P1>110</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP client. Code 110 reason</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
Can you please help me resolve this issue. Please let me know, if I am following the right steps.
Thanks in advance
Regards,
Amit

Hi -
Since you're using the http destination option in the channel, you just specify the user/pwd in the destination.
Regarding the issue, first, for the Logon/Security option in the destination, unless you'll be using a client certificate to authenticate, you should choose option ANONYM SSL Client (Anonymous) - you still provide the user/pwd in the Logon section. Make sure you have imported the root cert of the CA verifying the server's identity into the client certificate list within STRUST (node SSL Client (Anonymous)).
Also, for some hints on the issue, look at the ICM trace - tcode SMICM->Goto->Trace File... you may need to increase the trace level - SMICM->Goto->Trace Level... After resolving the issue, make sure to set the trace level back to default.
Regards,
Jin

How to set HTTP header field "cookie" with http receiver adapter?

Hi,
I am using http receiver adapter (not axis) in a scenario. I could not set a parameter with key cookie in http header. Is there some kind of restriction to set it? I am able to set others like connection and create custom fields using ASMA and dynamic key configuration via UDF on mapping.
Could you please comment on, is cookie http parameter special or noneditable by PI's http adapter? I am looking for a solution without editing any abap code...
Regards,

I believe it is possible since axis adapter provides very same functionality. Let me summarize my scenario may be it helps:
I am trying to call series of webservice lets say in a BPM. First service (login service) will provide me with a session id (in http header with key Set-Cookie) then I will call another service which has that session id in its http header with key cookie then I am going to logout. So I am testing the second part now, but it doest let me send cookie http header parameter.
I hope I clarified a bit more my problem.
Regards,

Adapter specific properties (http receiver adapter)

Hi,
does anybody know the technical name for the HTTP destination of a http receiver adapter.
The documentation lists only the names URLParamOne to URLParamSix and HeaderFieldOne to HeaderFieldSix.
Neither the technical name for URL nor for a HTTP destiantion are mentioned.
Regards,
Marc

Hello Moorthy,
I know this part of the documentation.
So I set the indicator within the communication channel.
Now, I have to fill the dynamic configuration during my mapping. My code looks like following:
DynamicConfigurationKey keyURL = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/HTTP", XXXXX);
// access dynamic configuration
DynamicConfiguration conf = (DynamicConfiguration) param.get (StreamTransformationConstants.DYNAMIC_CONFIGURATION);
// set value
conf.put(keyURL, url);
So what has to be filled instead of XXXXX ?
Regards,
Marc

Hi,about http receiver adapter.

Similar Messages

Maybe you are looking for