Hi,about message mapping

why is always disabled the dependencies button in the message mapping editor of IR.
it is for ever gray whether in edit mode or not?

Hi,
The dependency button in Message mapping is used to show the Source field mapped to which target field.
Can u explain ur query clearly...
Regards
San
Remember to set the thread to solved when you have received a solution there is a Way.

Similar Messages

Doubt About Message Mapping

Hi Experts,
I have to get list of materials from sap r/3 system which starts with some Alphabate. Where can i do it .And how to do it . I think we can do it in Message Mapping. Please let me know the step by step process.
Helpful Ans wi be reward
Regards
Khanna

Hi Michal,
Here i am implementing HTTP TO RFC scenario
i have BAPI BAPI_MATERIAL_GETLIST
i have source structure MaterialNo.And in the receiver side i have BAPI.
Now my question is i want to get the materials which starts with some CA*
How can i achieve this in Message Mapping????????
Please Explain me in detail
Regards
Khanna

Issue about message mapping in XI

Hi,
I faced a mapping issue.
Mapping check the decimal pont position in the total string.
suppose value from ABAp side is 9.55
if length is 5.
then XI will give the value is 00955 ( i applied the right justified condition )
This is OK...
But in mapping when no value is coming from ABAP side,that time XI give error.
How do i create this mapping...????????
Regards,
sanghaitra

Hello,
This is OK...
But in mapping when no value is coming from ABAP side,that time XI give error.
Assuming that the value is null or suppressed, you can use the node function mapWithDefault for your mapping e.g
source -> mapWithDefault:00000 -> target
If the value is a space or blank, you can use this logic
constant:00000 -> \
source -> trim -> equalsS ----> ifThenElse -> target
constant: -> / source -> /
Hope this helps,
Mark
Edited by: Mark Dihiansan on Sep 8, 2011 8:08 AM

Question about message mapping

Hi,
When I use the visual mapping tool, I specify the condition that:
<SourceValue> equalsA 1, <TargetValue> value is 1; else it's 0.
However in the source XML, sometimes source XML is like:
<Root>
</Root>
where there's no SourceValue element. And now the mapping has exception. Then I try to use IsNil functionality, however then another exception saying "cannot cast '' to decimal" occurrred.
Is there a way for me to judge in the mapping so that I can pass through, e.g., when there's no this element, the target value is also 0.
Best regards,
-Stanley

Hi ,
Refer these blogs . It will help to u
Workflow in SAP NetWeaver
Visual Composer demo - Customer and Google API
Need to get a SAP NetWeaver component implemented quickly? Try SAP Best Practices
Visual Composer7.1 and Yahoo Maps - Part I
Regards,
Suryanarayana

Some quesionts about message mapping

becase I need use some pics to explain my question, so I post the question to my googlepage.
<a href="http://wanghui1225.googlepages.com/xi_question_1">http://wanghui1225.googlepages.com/xi_question_1</a>
Regards,
Hui
Message was edited by: Wang Hui

Hi,
Since you are using collapse context, the SUPPRESS is coming. Functionality of collapse is it delete all values from all contexts from the inbound queue except for the first value. Empty contexts (= ResultList.SUPPRESS) are replaced by empty strings.. Finally, all internal context changes are deleted, so that all values belong to one and the same context.
Give the input queue for collapseContext, then it will be really helpful.
See the input queue had 3 true's followed by false (2) and true (2). As you can see that the starting context itself is false and so SUPRESS came in the output queue.
What i suggest is to check all these queues simultaneously:
1) exist
2) context
3) splitbyvalue
with different values then you will be able to figure out the reason.
Regards
Suraj
Message was edited by: S.R.Suraj

Step by step message mapping/testing examples

Hi!
I have read many blogs and SAP literature about message mapping.
However, none of them gives step by step details.
Can anybody give any very detailed mapping procedures?
Thanks a lot!

Lee,
Have you seen this three series of weblogs where he is explained very clearlyn (2nd one is for mapping):
/people/james.guanzon/blog/2006/02/22/how-to-support-industry-standards-in-xi-part-i-of-iii--interfaces
/people/james.guanzon/blog/2006/03/23/how-to-support-industry-standards-in-xi-part-ii-of-iii--mapping
/people/james.guanzon/blog/2006/09/09/how-to-support-industry-standards-in-xi-part-iii-of-iii--config-test
If you want to test your mapping go through the weblog:
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
Also check this weblogs for reference on mapping:
/people/claus.wallacher/blog/2006/04/17/replication-of-nodes-using-the-graphical-mapping-tool
/people/daniel.graversen/blog/2006/09/15/message-mapping-verification
/people/harrison.holland5/blog/2006/12/08/mapping-context-changes-in-xi
---Satish

[RFC to File]Problem about Changing file name in message mapping.

Hi,
my problem:
 Type:RFC to File
 I change the file name in message mapping.
when I call the RFC to send the data twice at the same time, both of the output file names are changed while I only want to change the second output file name.
 thanks
Sam

In my MM, the input values to these variables (var1, var2 and var3) are (<ZZCOMBI>array,G499999,END_FIFC0029) ,
var1 is an array of input <ZZCOMBI> item list;
var2 is get from a property file by call another UDF;
var3 is constant value.
the test input data :
I send the data for the first time:
- <rfc:Z_IFCFR821_ZIFCTT82100010 xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
- <T_ZIFCTS82100010>
- <item>
<ZZCOMBI>G000002G000002</ZZCOMBI>
<ZZKYKBN>*</ZZKYKBN>
<ENAME_VE />
<ENAME_Z5 />
</item>
</T_ZIFCTS82100010>
</rfc:Z_IFCFR821_ZIFCTT82100010>
so the input values to these variables (var1, var2 and var3) are (G000002G000002,G499999,END_FIFC0029)
the output file name(File1) :END_FIFC002920090413-171534-053.dat
output record: G000002G000002
because the data what I send is the last record, the system send the dummy data for the second time by program.
- <rfc:Z_IFCFR821_ZIFCTT82100010 xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
- <T_ZIFCTS82100010>
- <item>
<ZZCOMBI>G499999</ZZCOMBI>
<ZZKYKBN />
<ENAME_VE />
<ENAME_Z5 />
</item>
</T_ZIFCTS82100010>
</rfc:Z_IFCFR821_ZIFCTT82100010>
so the input values to these variables (var1, var2 and var3) are (G499999,G499999,END_FIFC0029)
the output file name(File2) :END_FIFC002920090413-171533-928.dat
output record: G499999
I find that File2(20090413-171533-928) was ouput before File1(20090413-171534-053 ) from the time stamp.
I am not sure about that "XI will create a message ID for each message and the messages are independent." as you mentioned above.
Best regards
Sam
Edited by: YONGHE ZHOU on Apr 15, 2009 3:59 AM

About message queue in message mapping?

Hi SDNer,
I have been read help.sap.com and sdn threads about message queue
I hope this thread should be help for all like me.
thank you
Sha

Hi Shankar,
XI uses Queue's to store messages, If you worked on message mapping you can see the how queue look like,
Every queue having context ,it separate the values,it store the messages in highrarchy manner.
Using Context Handling we resoleve context issues.
Using node functions we aceive Context Handling.
Search in SDN there is some good blogs abt Node Functions, if you understand nodefunction you wil understand the Queue concepts.
Regards,
Raj

Problemin activating Message Mapping

Hi experts,
I am facing some problem while activating the message mapping, error is as follows:
"Internal error while checking object Message Mapping.
[][db2][jcc][102][10040] Non-atomic batch failure.
The batch was submitted, but at least one exception
occurred on an individual member of the batch.
Use
getNextException() to retrieve the exceptions for specific
batched elements."
PLEASE PROVIDE ME WITH SOME IDEA ABOUT WHY IT IS HAPPNING.
Thanks in advance.
Regards
Pradeep

Hi,
The same error is solved in this thread..
Problem Activating Mappings in the IR -- see the last 2 comments.
Thanks
Swarup

Creation of CDATA with message mapping

Hello all,
Is everyone absolutely sure that a cdata string cannot be created in the middle of an xml file using message mapping?
I have tried doing the XSL map in other blogs I even tried writing a whole XSL map in xml spy - yet xi complains about not finding this class file and that class file. I'm having a hard time believing that this is so hard to do in XI - especially when Microsoft web service implementation seem to long for data crammed into a string ( in my experience ).
Any help is GREATLY appreciated.
Thank you!!!
Scott

Hi Scott,
Pls follow the following steps to insert XML string into a single element:
Create a xsl file with the following data:
<?xml version='1.0' ?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" NSpace>
<xsl:template match="/">
<namespace:name1>
<xsl:text disable-output-escaping="yes"><![CDATA[<![CDATA[]]></xsl:text><xsl:copy-of select="//namespace:name"/><xsl:text disable-output-escaping="yes"><![CDATA[]]]]></xsl:text><xsl:text disable-output-escaping="yes"><![CDATA[>]]></xsl:text>
</namespace:name1>
</xsl:template>
</xsl:stylesheet>
In the above code I have removed xmlns:p2="http://frik.bcc.com.pl" which is not needed.
Also you have to put '//' before the target element from where you want to start creating XML string over here it is name. And name1 is the element you want to store the XML string in.
So anything in the element name will be stored in name1
Regarding the namespace: To find out the namespace test your message mapping between the source and the target without adding XSLT mapping. After testing click on 'SCR' tab present on top of the target window. There you will see ns1: or ns2: attached to each element. Replace namespace in the above code with ns1: or ns2:. And replace NSpace in the above XSL Header with the namespace in the SCR of test map.
So the final XSL file will look like that:
<?xml version='1.0' ?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns1="http://sap.com/xi/HR">
<xsl:template match="/">
<ns1:name1>
<xsl:text disable-output-escaping="yes"><![CDATA[<![CDATA[]]></xsl:text><xsl:copy-of select="//ns1:name"/><xsl:text disable-output-escaping="yes"><![CDATA[]]]]></xsl:text><xsl:text disable-output-escaping="yes"><![CDATA[>]]></xsl:text>
</ns1:name1>
</xsl:template>
</xsl:stylesheet>
Dont forget to put '//' before the target element.
This should work. Or pls put the source and target xml struct and we will assist you further.
Regards,
Ashish

Weblogs for different message mapping needed

Hi,
I want to do scenarios using XSLT mapping, ABAP mapping, Java mapping.
Can you suggest me some weblogs...
Thanks,
Ram

Hi Ram,
thought i will start of from scratch.Mapping is basically done to convert one form of xml into another form. This can be done using either of them mentioned below.
- Graphical mapping
- XSLT mapping
- JAVA mapping
- ABAP mapping
To know more about each of them please go thru the following links. And if you ask me your which is better, it depends basically on the scenario you implementing and the complexity involved. Anyways please go thru the following links:
Graphical mapping
/people/bhanu.thirumala/blog/2006/02/02/graphical-message-mapping-150-text-preview
http://www.sapgenie.com/netweaver/xi/mapping1.htm
/people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
XSLT mapping
http://help.sap.com/saphelp_nw04/helpdata/en/73/f61eea1741453eb8f794e150067930/content.htm
JAVA mapping
http://help.sap.com/saphelp_nw04/helpdata/en/e2/e13fcd80fe47768df001a558ed10b6/content.htm
ABAP mapping
/people/r.eijpe/blog
To know more about the value mapping tools for the SAP Exchange Infrastructure (XI), please go thru the following link:
http://www.applicon.dk/fileadmin/filer/XI_Tools/ValueMappingTool.pdf
To get an idea as to what value mapping is, please go thru the following links:
http://help.sap.com/saphelp_nw04/helpdata/en/13/ba20dd7beb14438bc7b04b5b6ca300/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/f2/dfae3d47afd652e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/2a/9d2891cc976549a9ad9f81e9b8db25/content.htm
most of the links that I have provided also helps you get the step by step procedure of doing the same. And also involves the procedure to implement certain advanced features.
Hope this clears your doubt fully.
Also go through this threads...
Re: Different types of Mapping in XI
Regards,
Abhy

How to validate a date in message mapping

Hi experts,
how to validate a date in message mapping. For ex: if date comes as 2008/02/31, then file it shold not get processed.how to achieve this in message mapping. Please help .
Thanks&Regards,
Reyaz Hussain

Hi,
There are few simple ways for date validation as follow,
1.If you would like to handle it in XI only, then in message mapping you could verify about it with the help of generating smart exception.
For e.g in mapping there is one Date conversion API i.e. somthing DateTransformation It converts the incoming date format to required format. Here give the date format i.e expected from Sender File.
If in case the format miss-matched then it will create the exception.
You could handle this exception with the use of [Alert notification|http://help.sap.com/saphelp_nw04/helpdata/en/2c/abb2e7ff6311d194c000a0c93033f7/frameset.htm] and could be even able to notify to sender system about it.
2. The another solution is easy for SAP synchornous communication --If you are passing the file data to SAP, then you could use below function modules to verify date format in receiver RFC/BAPI or inbound IDOC program. If the sy-subrc is not 0 then don't process further.
CONVERT_DATE_FORMAT
ISU_DATE_FORMAT_CHECK
Thanks
Swarup

Writing message mapping function in Java in integration repository

Hi XI Pundits,
I am new to XI. I was working on Message mapping in intergration repository.
To map the source messages to target messages, we do graphical kind of mapping like drag and drop.
There are some functions aavilable at the bottom like concatehate, trim and etc. which we use if we need to modify the source message and map to target.
But in case we face a situation when we don't find the function which suits our requirement, I guess we need to write a new function. We can write these new function using Java only.
Can someone throw some light on this ?
What do we do to invoke java editor in integartion reposity to write mapping function in java ?
Can someone give an example of snippet of code ?
Thanks.

Hi Tushar,
Go thro this help link. You will get all info about User defined function.
http://help.sap.com/saphelp_nw04/helpdata/en/22/e127f28b572243b4324879c6bf05a0/frameset.htm
To get more understanding on mapping go thro this link(PDF File)
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9202d890-0201-0010-1588-adb5e89a6638
Hope this helps.
regards,
P.Venkat
Message was edited by: Venkataramanan

Different options for message mapping in BPM

Hey guys
i m in the learning phase of BPM and am kinda confused with the different ways we can do message mapping in a BPM scenario.
first of all we can do message mapping before BPM,we can also do after BPM and lastly we can do inside BPM(ofcurse this is not recommended as its too resource consuming)
i have bene through starters blog on BPM by Krishna moorthy and Arpit seth,and now am wondering how to use the mapping in diff. ways
suppose i m doing a simple File to File with BPM(just for practise purpose)
now here is what i have designed in IR
DT_sender_File DT_receiver_File
MT_sender_File MT_receiver_File
MI_Outbound_sender(async,outbound), MI_Inbound_receiver(async,inbound)
AI_sender(abstract,async) AI_receiver(abstract,async)
MM_File_File(using MT_sender_File and MT_receiver_File)
now i want to clear some doubts about interface mapping.my understanding is
if i do interface mapping between MI_Outbound_sender and AI_receiver,this will be interface mapping before BPM.
if i do interface mapping between AI_sender and MI_Inbound_receiver,this will be interafce mapping after BPM
and if i do interface mapping between AI_sender and AI_receiver then it will be mapping inside BPM.
is my understanding correct?if yes,then does that means we can we any of the above mapping in our scenario.(if we dont consider the performance issue as of now)
thanx
saif

Hi Saif,

is my understanding correct?
Yes, thts correct
if yes,then does that means we can we any of the above mapping in our scenario
Of course, u can use any of them (overlooking the performance issue)
Regards,
Prateek

How to use functions in Message Mapping

Hi All,
I am new to SAP XI. I don't know how to use functions in message mapping. Can any body tell me how to use IF condition in message mapping.
Please provide me a good link where I can get the details how to use those functions.
Thanks,
Srinivas.

HI Srinivas
Please take a look at these links,
http://help.sap.com/saphelp_nw04/helpdata/en/43/c4cdfc334824478090739c04c4a249/content.htm
/people/sravya.talanki2/blog/2005/08/16/message-mapping-simplified--part-i
/people/sravya.talanki2/blog/2005/12/08/message-mapping-simplified-150-part-ii
This will help you
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/190eb190-0201-0010-0ab3-e69f70b6c257
http://help.sap.com/saphelp_nw04/helpdata/en/55/7ef3003fc411d6b1f700508b5d5211/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/a8/bfc6373c8fea43bdb3541535bcbd43/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8a57d190-0201-0010-9e87-d8f327e1dba7
This will give you a detailed Idea about Context
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db95f835c111d1829f0000e829fbfe/frameset.htm
This will give more explanation on Queue
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/51a39490-0201-0010-5b9f-ae21e8b78195
For understanding node functions this blog will help you
/people/sravya.talanki2/blog/2005/12/08/message-mapping-simplified-150-part-ii
Not sure you can find a collection of all...
Cheers..
Vasu
** REward Points if found useful **

Hi,about message mapping

Similar Messages

Maybe you are looking for