Hi, After migration of smart form into adobe form, while checking( syntax )
hi,
After migration of smart form into adobe form, while checking( syntax ) the error message will be displayed like the Sender Country is not filled. if i fill the sender country then only the adobe form activate but no sender country is provided in smart form. how can we rectify this problem in migration of smart form into adobe forms ( Address node ).
sender country is not mandatory in smart form but comes into adobe form it is mandatory. How can we handle this type of issues.
Thanks®ards,
Ashok Reddy
I too have the same query..to check Adobe form after migrating from smartform.
Can anybody answer in this regard?
Thanks in advance..
Similar Messages
-
Migration of JSP forms into adobe forms for PCRs
Hi All,
I am working on Upgrade project for ESS/MSS. Our client had JSP based PCRs which we need to migrate into adobe based PCRs.
i have few questions regarding this migration.
Has someone the experience to migrate a JSP based PCR into Adobe based PCR?
How much effort the migration will take, and can we fully reuse ISR configuration and workflow?
Thanks,
AnkurIf you are using the SAP delivered JSP forms - there maybe equivalent SAP delivered Adobe based PCRs in the next ESS/MSS releases that you can use instead of migrating the forms
I am not aware of any tools or documentation that help to migrate custom JSPs to custom Adobe forms
As I see it you would have to create new Adobe based versions of your JSP PCRs - I am vaguely aware of a guide entitled
"Developing Your Own Personnel Change Requests" for ERP2004 - however I am not sure how you would obtain a copy
or whether this approach is recommended, supported or complete - this documentation would detail how to create an ISR based Adobe form
At the same time there may be restrictions as to what standard JSP forms are available as standard Adobe forms and what can be configured in the ISR scenarios (for example use of Value Help in WD JAVA Adobe scenarios)
- SAP have been recommending instead of creating say a ISR based Adobe form for WD JAVA to
use HCM processes and forms (also available in the MSS role) going forward
- HCM processes and forms is WD ABAP based framework using Adobe which allows users to create custom Adobe forms which update back-end infotypes directly from the Portal - also such scenarios as Value Help etc may be possible (or more easily achieved)
Best wishes
Stuart -
Migrated smart form to adobe form - the changes after wards
Hi Experts,
I migrated a smart form into Adobe form.
When I open the layout most of the fields are out there in the layout, what changes should we do exactly after the migration.
Please help me out.
Thanks in Advance,
PraveenHi,
Can you give me your email id so that i can send you a pdf having the information to create interactive forms in ABAP or go though the below link to download this pdf.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c2567f2b-0b01-0010-b7b5-977cbf80665d
for more details go through the below url:
http://help.sap.com/saphelp_nw2004s/helpdata/en/c8/4adf7ba13c4ac1b4600d4df15f8b84/frameset.htm
Please reward points if helpful.
Thanks and regards,
Vaibhav Tiwari. -
Migration of smartforms into adobe forms
hi,
After migration of smart form into adobe form, while checking( syntax ) the error message will be displayed like the Sender Country is not filled. if i fill the sender country then only the adobe form activate but no sender country is provided in smart form. how can we rectify this problem in migration of smart form into adobe forms ( Address node ).
sender country is not mandatory in smart form but comes into adobe form it is mandatory. How can we handle this type of issues.
Thanks®ards,
Ashok ReddyHi Aravind
Have you checked the following threads before posting
Smartforms or Adobe Interactive Forms?
Regards
Sachin -
Can I enter an image into a form on Adobe Forms Central?
Can I enter an image into a form on Adobe Forms Central?
Yes, you can add an image to a form design using the toolbar button highlighted below:
-
How can I embed an DOCTYPE HTML Form from Adobe Forms central into a responsive html5 page?
How can I embed an DOCTYPE HTML Form from Adobe Forms central into a responsive html5 page?
-LuisHi,
You can embed the form on your website, but you need to make sure that javascript has been enabled in the browser. You need to copy the embed code and add it into your HTML code. If you would like FormsCentral to generate embeded HTML form without using javascript, you may post a feature request and vote it. Hope it helps! Thanks!
Kind regards,
Shiyao Bao -
i have the following problem: i lost my cs6 Adobe Production Premium installer dvds and the serials within the package, after all i logged here into adobe and cant find any product in my profile, so i am not able to see my serials or my installations i have on my macbookpro. Can you help me to find out where i am registerd?
If your registrations do not show at https://www.adobe.com/account.html you will not get help in an open forum
You MAY get help at Contact Customer Care
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us" -
is there a way to bring these forms into adobe indesign or adobe acrobat professional or nitro and make them editable/fillible so I don't have to recreate them from scratch?! please advice. thanks
If you want to process those files in the software that you have already you will need to use DNG converter 8.3 or newer to create digital negative copies of your raw files. If you upgraded your Lightroom to Lightroom 5.3 or newer you would be able to open the original raw files. I am not familiar enough with Photoshop Elements to tell you for sure what version you need. But it has to be compatible with Camera Raw 8.3 or newer in order to open the files from your camera.
-
How to convert smartforms into Adobe forms.
Hi......
How to convert smartforms into Adobe forms.
Regards
Anbu BHi,
You need to use the Function Module CONVERT_OTF.
Please check the below code
REPORT zsuresh_test.
Variable declarations
DATA:
w_form_name TYPE tdsfname VALUE 'ZSURESH_TEST',
w_fmodule TYPE rs38l_fnam,
w_cparam TYPE ssfctrlop,
w_outoptions TYPE ssfcompop,
W_bin_filesize TYPE i, " Binary File Size
w_FILE_NAME type string,
w_File_path type string,
w_FULL_PATH type string.
Internal tables declaration
Internal table to hold the OTF data
DATA:
t_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
Internal table to hold OTF data recd from the SMARTFORM
t_otf_from_fm TYPE ssfcrescl,
Internal table to hold the data from the FM CONVERT_OTF
T_pdf_tab LIKE tline OCCURS 0 WITH HEADER LINE.
This function module call is used to retrieve the name of the Function
module generated when the SMARTFORM is activated
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = w_form_name
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
fm_name = w_fmodule
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Calling the SMARTFORM using the function module retrieved above
GET_OTF parameter in the CONTROL_PARAMETERS is set to get the OTF
format of the output
w_cparam-no_dialog = 'X'.
w_cparam-preview = space. " Suppressing the dialog box
" for print preview
w_cparam-getotf = 'X'.
Printer name to be used is provided in the export parameter
OUTPUT_OPTIONS
w_outoptions-tddest = 'LP01'.
CALL FUNCTION w_fmodule
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
control_parameters = w_cparam
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
output_options = w_outoptions
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
job_output_info = t_otf_from_fm
JOB_OUTPUT_OPTIONS =
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
t_otf[] = t_otf_from_fm-otfdata[].
Function Module CONVERT_OTF is used to convert the OTF format to PDF
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
MAX_LINEWIDTH = 132
ARCHIVE_INDEX = ' '
COPYNUMBER = 0
ASCII_BIDI_VIS2LOG = ' '
PDF_DELETE_OTFTAB = ' '
IMPORTING
BIN_FILESIZE = W_bin_filesize
BIN_FILE =
TABLES
otf = T_OTF
lines = T_pdf_tab
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
ERR_BAD_OTF = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
To display File SAVE dialog window
CALL METHOD cl_gui_frontend_services=>file_save_dialog
EXPORTING
WINDOW_TITLE =
DEFAULT_EXTENSION =
DEFAULT_FILE_NAME =
FILE_FILTER =
INITIAL_DIRECTORY =
WITH_ENCODING =
PROMPT_ON_OVERWRITE = 'X'
CHANGING
filename = w_FILE_NAME
path = w_FILE_PATH
fullpath = w_FULL_PATH
USER_ACTION =
FILE_ENCODING =
EXCEPTIONS
CNTL_ERROR = 1
ERROR_NO_GUI = 2
NOT_SUPPORTED_BY_GUI = 3
others = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Use the FM GUI_DOWNLOAD to download the generated PDF file onto the
presentation server
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE = W_bin_filesize
filename = w_FULL_PATH
FILETYPE = 'BIN'
APPEND = ' '
WRITE_FIELD_SEPARATOR = ' '
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
IMPORTING
FILELENGTH =
tables
data_tab = T_pdf_tab
FIELDNAMES =
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks,
Ruthra -
Converted Smart Form to Adobe Form
Hi,
Does anyone have a list of all converted Adobe Form with their print programs?
mySapERP2005 and mySapER2004.
I was searching on service.sap.com/notes but I cannot find a clear overview. I have read that SAP has converted 46 smart forms to adobe forms.
Does anyone has more information?
Thanks.
Vivek.Hi,
Does anyone have a list of all converted Adobe Form with their print programs?
mySapERP2005 and mySapER2004.
I was searching on service.sap.com/notes but I cannot find a clear overview. I have read that SAP has converted 46 smart forms to adobe forms.
Does anyone has more information?
Thanks.
Vivek. -
How do I add a functional "submit button" to a pdf form in Adobe Acrobat Pro XI ? I created the pdf form in Adobe Forms Central. It's for an online Diet Questionnaire. After people complete the form I'd like them to click "SUBMIT" and the completed form will be emailed to me.
This can be a bit confusing because Acrobat 11 comes with the desktop app that allows you to create simple PDF forms without having a FormsCentral account. Some people find this helpful, but you need to understand that when you generate the PDF form, it is Reader-enabled by Acrobat. In order to edit the form further in Acrobat, you have to create a non-enabled copy of the form. You do this in Acrobat by opening the form and selecting: File > Save a Copy
and opening the copy. It is not opened automatically.
You can now add a button and set it up to submit by email, either using a "Submit a form" action or the submitForm JavaScript method. You can set it up to include just the form data or the entire PDF, and will want to use a mailto type URL. Submitting the form to the FormsCentral server has a number of important advantages over email (much more reliable, more secure, etc.), so you might want to consider it.
If the form needs to be saved with Reader versions prior to 11, then you will need to Reader-enable the document. In Acrobat 11 you do this by selecting: File > Save As Other > Reader Extended PDF > Enable More Tools -
Hi, i had created a form on adobe forms central, but i don't have access to the results now. any help would be appreciated.
Hi massif76198910,
I don't see that you had a paid FormsCentral account. Were you using the free account? If so, you should still have access to the form until FormsCentral is retired on July 28 2015,
Are you able to log in? Or do you get an error when you try to log in to your account? Please try clearing the browser cache, or logging in via a different browser.
Best,
Sara -
I had my computer re imaged and reintalled Adobe XI. Now I cannot locate my forms in Adobe Forms Central. Help!
From your question, I take it you have Photoshop Elements 5.0.
You should ask over in the Photoshop Elements forum how to restore catalogs. I hope you have back ups of your images because the organizer doesn't physically store your images.
Link to Photoshop Elements forum:
http://forums.adobe.com/community/photoshop_elements -
Integrating mutiple forms into one form using tab canvas
Hi everyone,
I'm relatively new to Forms 6.0 and also to this discussion. Could somebody please explain the pros/cons while integrating 8 maintenance forms into one form(Each page in the tab canvas representing one form)?
Any help will be greatly appreciated.
Thanks
ArunaIf the maintenance forms are small, you can integrate them into a single form with a tab canvas, although 8 may prove difficult--try it and see what it looks like to have eight tab pages. Make sure the first block and field in the form navigator is the field you want to show at startup.
You would use multiple forms (1) to modularize largish chunks of complex code that don't interact with each other (2) to decouple logically separate applications (3) to decouple reusable modules that you can then pop into other applications (4) to create shareable components to share through an object library into base forms.
In your case, the main issue is the logical separation with reusability also raising its head. Each form is logically distinct for maintaining a specific set of tables, so putting it in a separate form makes sense. It would also allow you to reuse the maintenance forms in different applications without including everything. This might be a security issue, for example--some apps might need access to only some of the 8 forms.
Tab pages are also not as easily formatted as you might like, so check it out before assuming that tab page interfaces in Forms are your solution. -
Smart form to Adobe form migration Log errors
Hi Guys,
I tried to migrate a smartform to adobe form, but I encountered issues in the created migration log.
I am new to Adobe forms, I'm hoping that you could help me correct these issues...
Below are the errors encoutnered:
ERROR1:
- "Field SFSY-PAGE is unknown. it is neither in one of the specified tables nor defined in the DATA statement.
(this looks like a declaration problem, I checked the left pane (system fields) SFSY is declared, this is being used instead of SFPSY because I am using smartforms compatible interface.
ERROR2:
- "TLINE" is not an internal table "OCCURS n" specification is missing.
(I also checked TLINE declarations, everything is declared by the system during convertion.. not sure where to put the proper declaration to address this issue)
ERROR3:
-"VBDPR" is neither specified under "TABLES" nor is it defined as an internal table.
(This one is coded in the smartform exactly same with the migrated adobe form. Another data declaration issue, how can this be done in adobe forms?)
ERROR4:
-Field ITEMS5-POSEX has a conversion routine (see SAP Note 796755) --> I will check this note and let you know
All syntax errors are under the context tab, inside the node source code was generated after the convertion and created the tab program lines.
ERROR1: Code
v_finalpage = v_counterpage + sfsy-page
ERROR2: Code
* Read the sales orders text
PERFORM read_salestxt TABLES tline
USING 'Y032'
v_text
'VBBK'.
ERROR3: Code
LOOP AT vbdpr WHERE....
I explained the issue the best way I can, hope this is enough to give you the idea..please provide feedback on this.
Rgds,
Jeffbroodwar
Edited by: Jeffbroodwar on Mar 23, 2011 2:12 PMHi All,
Just incase others encounter this (new to migration) please see the answers below:
ERROR1: SFSY - in my code, this was used to create the form pages. in ADOBE forms, we can use the ready objects inside
the layout designer (just drag and drop page n of m just look for it in the objects palette.
ERRORS2 to 3: Tables, I used type table as reference (create in SE11) and declared it in my interface as reference for my tables that have errors (change ref --> LIKE to TYPE then replace the table used in smartform with the newly created type table.
ERROR4: Just see sapnote. just change the data type to avoid errors in calculation.
Hope this will help.
Thanks,
Jeffbroodwar
Maybe you are looking for
-
Correctly decoded? need a lot of help on this one!
Having trouble with adobe reader. getting a message that says: Adobe Reader could not open 'testdocxxxx.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and was
-
My Ipod-touch was ios5 when I bought. You recommend to upgrade ios6, because set-up icon always shows me "+". For that on facebook I can't see wall photos. So I want my ipod touch to be back as initial version ios5. How can I do? please tell me.
-
Issue in Payables invoice import prorgam
HI All, I have run the Payables invoice import prorgam. result is completed normal. now the problem here is invoices data is not populated in Base table. when i check ap_rejections_table, it does not contain any records. can some one guide me how to
-
Error Handling - displaying Error on ALL error events
I am trying to set up a global error handling page error.cfm so that whenever any error at all occurs I can display my error.cfm page. At first I tried the following in the application.cfm page, and then ran a page that tried to output a variable tha
-
WSUS Server Cleanup Wizard... to run or not to run?
Hi, Sometimes on my server, the WSUS synchronization fails (operation timed out) and I heard that running the Server Cleanup Wizard could help. I also heard that nothing should be done in the WSUS console because it's managed by SCCM. For SCCM, is it