Hi,after upgrade to OS x mavericks i can't open my windows at BOOTCAMP, anyone can help me with this situation?

HI after i upgrade to new Os x Mavericks i found that i cant open my WINDOWS in my BOOTCAMP, its always appear asking me to windows running or not well shut down properly message, after i try to go to RUNNING WINDOWS NORMALLY it stil cant open and auto open and running on MAC. anyone please help me. Thank you

Ok this worked to solve the error.
Use cmd prompt in windows 7 or 8 and run as admin:
sc config lanmanworkstation depend= bowser/mrxsmb10/nsi
sc config mrxsmb20 start= disabled
No need for all that power shell nonsense as shown elsewhere for windows 8.
That's it. Also force smb2 disabling on the apple side for good measure.
With the above I was able to network mavericks and windows 8.1 pro flawlessly. He issues I had before where I could not read video, ISO and audio files (but could open documents and pictures from the windows machine connected to an apple network share folder went away.

Similar Messages

  • After upgrade, firefox will not launch says : you cannot open the application "Firefox" because it is not supported on this architecutre how can i get firefox to work again?

    unable to launch firefox after I upgraded firefox

    I see you are using a PPC Mac with OSX 10.5.8.
    Either you can use the last release from Mozilla worked on PPC which is 3.6.*.
    The current 3.6.22 is at http://www.mozilla.org/en-US/firefox/all-older.html
    Or use a third-party build from http://tenfourfox.blogspot.com/2011/08/601-now-available.html
    As of Firefox 4.0 and newer a '''Intel''' Mac and OSX 10.5+ is required.

  • After Downloading 10.4..my itunes wont even open on my computer..anyone know the solution to this?

    After downloading 10.4 my itunes wont even open on my computer..we have tried different things to see if it will open, downloaded it again..and still it wont open.

    try running as administrator -- a temp solution for me anyway.  Waiting for apple to fix whatever this is.   At least one other poster here had same problem and "solution" worked for him as well.

  • After upgrading to OS X Mavericks syslogd needs lot of memory and cpu, system is very slow

    After upgrading to OS X Mavericks the system is very slow. securityd and syslogd are using 50% of cpu and memory is also used by syslogd and kerneltask (8 GB out of 12). After rebooting the system it runs very well, a view days later (without reboot, only hibernating) the situation is the same.
    Looks like a problem in OS X. Any solutions?

    I haven't worked out the LDAP messages but I noticed at other times I was seeing lots of album art messages from BlackBerry desktop. I'd already uninstalled the app but it still had processes running. I followed this link to remove completely; http://apple.stackexchange.com/questions/57023/how-to-uninstall-completely-black berry-device-manager
    CPU levels have been noticeably lower ever since.

  • After upgrading to OS X Mavericks Time machine stops working

    After upgrading to OS X Mavericks Time machine stops backing up and sometimes hangs on ,,preparing,, for o days and sometimes stops inmediatly. Report says:
    Backing up to /dev/disk1s2: /Volumes/Backup/Backups.backupdb
    Event store UUIDs don't match for volume: Macintosh HD
    *** Terminating app due to uncaught exception 'NSRangeException', reason: '*** -[__NSArrayM objectAtIndex:]: index 0 beyond bounds for empty array'

    Is this a Firewire or Thunderbolt connected disk?  There are know issues with that in Mavericks.  If so try connecting the drive by USB as you continue.
    Is it a WD drive?  There appear to be issues with those drive on Mavericks.
    Time Machine Troubleshooting
    http://pondini.org/TM/Troubleshooting.html
    A4 - Full Reset of TIme Machine

  • Epson Stylus Photo T50 is idle after upgrading to OS X Mavericks, Epson Stylus Photo T50 is idle after upgrading to OS X Mavericks

    Hello,
    I have an Epson Stylus Photo T50 and after upgrading to OS X Mavericks it does work and is idle the whole time.
    I'm from Brazil and would like to know if an update comes out soon or is there another solution for my case?
    I'm waiting for aid

    You probably need an updated driver:
    Epson drivers for Mavericks:
    http://www.epson.com/cgi-bin/Store/support/SupportMavericks.jsp

  • My mail messages are blank after upgrading to OS X Mavericks. How do I fix this??

    My mail messages are blank after upgrading to OS X Mavericks. How do I fix this??

    Hi, I had this same problem. I have a load of work subfolders and was showing the message header but no content. I think it lost the link to the original messages.
    There may be a simpler way but I fixed it by going to the mail folders in finder. I took the following steps:
    Go to user library (hold down the alt key whilst clicking the Go menu in finder to access user library)
    Go to user/Library/Mail/V2/Mailboxes. You should be able to see your mailboxes and your original messages (ending .emlx) after clicking down the hierachy in each mailbox. For some reason mail added a "-2" onto the end of each mailbox which I think has caused the problem.
    Copy each required mailbox (.mbox) onto desktop. I removed the "-2" at this stage to clean things up.
    In Mail, choose File/Import Mailboxes....
    Import data from: Apple Mail. Click continue, navigate to desktop and choose the relevant .mbox folders. Click Choose.
    It should then import the mail to a new folder called import in mail. You can then rename that folder or move the subfolders out.
    I moved the .mbox folders on my desktop to my documents folder as a backup just in case. I then deleted the problem mailboxes from the finders mailboxes folder.
    Problem solved - for me anyway!!
    Hope this helps.

  • I am using macbook air, after upgrading to os x mavericks, i am not able to mount my 1 tb seagate go flex hard drive , any solutions , also iPhoto is not upgrading , every time i try to upgrade, it shows an error.....

    i am using macbook air, after upgrading to os x mavericks, i am not able to mount my seagate 1 TB go flex hard drive, also iphoto upgrades crashes mid way ... what to do ?

    What exactly crashes?  iPhoto upgrades to a library or the application? 
    What format is the external HD?
    OT

  • Okidata printer errors after upgrading to OS X Mavericks

    Immediately after upgrading to OS X Mavericks, when I try to print with my Okidata C330DN color laser printer will NOT print in color.
    I get this message:
    "The Print Dialog Extension could not be loaded because it has not been updated to run in this application's secure environment".
    I contacted Okidata, who said "give us a week" to update the driver.  Well, they updated their driver, I just installed it, and get THE SAME ERROR...

    This is because of sandboxing, and Okidata will need to release another driver that handles these permissions issues. You can try printing from a non-sandboxed application like Safari, if that helps.

  • Corrupt windows after upgrading to OS X Mavericks

    I just upgraded to OS X Mavericks and have noticed that my windows have corrupt areas around the border of them.  Also, if I hover over an icon on the lower bar, it pops up a white blob instead of the actual text.  This seems to be occuring when I start my laptop from sleep mode.  If I resize the window or maximize the window it still has the corrupt areas around the window. Anyone else seeing this same problem?

    Take a representative screenshot of the anomaly and post it in a reply.
    To take a screenshot hold ⌘ Shift 4 to create a selection crosshair. Click and hold while you drag the crosshair over the area you wish to capture and then release the mouse button. You will hear a "camera shutter" sound. This will deposit a screenshot on your Desktop.
    If you can't find it on your Desktop look in your Documents or Downloads folder.
    When you post your response, click the "camera" icon above the text field:
    This will display a dialog box which enables you to choose the screenshot file (remember it's on your Desktop) and click the Insert Image button.
    ⌘ Shift 4 and then pressing the space bar captures the frontmost window.
    ⌘ Shift 3 captures the entire screen.
    Drag the screenshot to the Trash after you post your reply.

  • Itunes freezes after upgrading to OS X Mavericks v10.9.3 on connecting iPhone 5

    Itunes freezes after upgrading to OS X Mavericks v10.9.3 on connecting iPhone 5.
    I tried it with a differnt Iphone and the results are the same. Any suggestions?

    Hi JZN1994,
    Welcome to the Apple Support Communities! I understand that after updating your computer to 10.9.3 iTunes stops responding when an iPhone is connected to it. There may be few different steps you will need to go through to get this resolved. I suggest working through the steps in the attached article.
    iTunes: May become unresponsive when connecting iPhone, iPad, or iPod touch
    http://support.apple.com/kb/ts3219
    Thanks for reaching out, 
    -Joe

  • My Dock icons looks garbled after upgrading to OS X Maverick.

    My Dock icons looks garbled after upgrading to OS X Maverick.Not all but most of them look like scattered dots instead of the icons, tried restarting multiple times still no use.
    I installed OS X Maverick last week and for a week it looked fine. I have restarted the OS for copule of times after upgrade. Now the Icons in the dock seem to be garbled.

    The dock preferences may be corrupted ...
    Open the Finder. From the Finder menu bar click Go > Go to Folder
    Type or copy paste the following:
    ~/Library/Preferences/com.apple.dock.plist
    Click Go then move the com.apple.finder.plist file to the Trash
    Restart your Mac.

  • My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.

    My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.

    Hmmmm... would appear that you need to be actually logged in to enable the additional menu features.
    Have you tried deletting the plists for MAS?
    This page might help you out...
    http://www.macobserver.com/tmo/answers/how_to_identify_and_fix_problems_with_the _mac_app_store
    Failing that, I will have to throw this back to the forum to see if anyone else can advise further.
    Let me know how you get on?
    Thanks.

  • I'm unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK

    I’m unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK – and only fails when I write from iTunes.  The drivers are up to date
    Microsoft Windows 7 x64 Business Edition Service Pack 1 (Build 7601)
    Dell Inc. Latitude E6420
    iTunes 12.0.1.26
    QuickTime 7.7.6
    FairPlay 2.7.39
    Apple Application Support 3.1
    iPod Updater Library 12.0
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 8.0.5.6
    Apple Mobile Device Driver 1.65.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 3.06.0.2770
    Gracenote MusicID 3.06.0.2770
    Gracenote Submit 3.06.0.2770
    Gracenote DSP 3.06.0.2770
    iTunes Serial Number 756D13C00C3583C8
    Current user is not an administrator.
    The current local date and time is 2015-01-13 14:47:35.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Intel(R) HD Graphics Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 12.0.1.26 (x64) is currently running.
    iTunesHelper 12.0.1.26 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** CD/DVD Drive Tests ****
    LowerFilters: SbCeCd (3.2.6.3),
    UpperFilters: GEARAspiWDM (2.2.3.0),
    F: HL-DT-ST DVD+-RW GU40N, Rev A103
    Drive is empty.
    The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.
    F: HL-DT-ST DVD+-RW GU40N, Rev A103
    Audio CD in drive.
    Failed Reading table of contents, error 4000.
    Check the website of your computer or drive manufacturer to verify that you have the latest firmware for your CD / DVD drive.
    Audio CD reading failed. Error Code:   87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87.
    iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
    Get drive speed failed. Error Code: 4000.
    The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.

    Hi iTunes-1,
    Welcome to the Support Communities!  The error message you posted indicates a possible firmware update is needed for iTunes for Windows to work with your CD drive.  
    iTunes for Windows: Updating the firmware on your CD or DVD drive - Apple Support
    http://support.apple.com/en-us/HT201852
    Having outdated firmware can cause issues using CDs and DVDs with iTunes for Windows. Firmware is a type of software stored in a chip in hardware that can sometimes be updated.Identifying drives and firmware versions
    To run CD Diagnostics, follow the steps in this document.
    After following the steps to run CD Diagnostics linked above, look at section three to find out more about your optical drive(s).
    Here is an example of what section three might look like:
    In this example there are two drives. Drive E is a Samsung DVD-ROM drive with a model designation of SD-616 that has firmware version F000. Drive F is an NEC drive with a model designation of NR-7900A that has firmware version 1.08.Updating the firmware
    If the optical drive you are using came with your computer, check with the support site for your computer for a firmware update. Typically you will need to go to the support website for the computer maker and click on a "downloads" or "updates" link, and then enter your computer model designation and operating system version to see what updates are available. Then look through the available updates for a firmware update for your optical drive. Download the updater and run it. If you need assistance applying the update, contact the maker of your computer.
    If the optical drive you are using came as a separate part (was not included with a computer), check the support site for the drive maker for a firmware update. Sometimes the manufacturer is not clear in the CD Diagnostics results. In that case, you may just have to search the Internet for the drive model designation. You can usually find out who made the drive by looking through the results of such a search. Once you have identified who made your drive, go to the support website for that company. Look for a "downloads" or "updates" link, and then enter your optical drive model designation. Download the updater and run it. If you need assistance applying the update, contact the maker of the optical drive.Verifying that the firmware was updated
    Run CD Diagnostics again.
    Examine the CD Diagnostics results. The firmware version for the drive should be the new version.
    Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability. Risks are inherent in the use of the Internet. Contact the vendor for additional information.
    Last Modified: Nov 8, 2014
    Also, you mentioned that you have been successful burning a CD with the Windows OS.  Make sure that you have closed all software programs that can access the CD burner so that there isn't a conflict for the drive.   Sometimes chaning the burn speed from "maximum" to 8x can also help in this situation.
    I hope this information helps ...
    - Judy

  • After upgrading to Yosemite I cannot share my pages document by mail as a word format - HELP please!!!

    After upgrading to Yosemite I cannot share my pages document by mail as a word format - HELP please!!!

    You don't need to go to the App Store to for support for Steam and Minecraft. You need to go to their website(s).
    You're welcome 

Maybe you are looking for

  • SP3 not installing with Snow Leopard

    I've been trying to reinstall Windows XP partitioned on my new mac along with Snow Leopard. The Service Pack 3 will not install with the XP and many errors pop up. I do have SP2 installed and windows is running fine except when trying to update the s

  • Where to make changes to calendar height, width, and misc changes

    Apex 4.2 I have a page with a calendar on it. I have several issues with formatting the data within each cell. Currently, I use a substitution string to place the id in the calendar cell. Clicking the id will link to another page. What I notice is th

  • N96 - RM 297

    Hey guys this is my first post here. I recently bought a nokia n96 from shanghai, china. Ofcourse, all the features are good but i didnt realize that it doesnt have 3G or wifi. I am an Indian and right now, I'm in shanghai on vacation. I will be taki

  • Is RoboHelp 7 compatible with Windows 8 64-bit?

    Is Robohelp 7 compatible with Windows 8 64-bit?

  • Wifi not working on passworded hotspots

    HEY GUYS! My friend is having a problem with his Gateway computer running Windows 8. I know this is not the kind of place to talk about Windows but you guys are always so helpful so I thought I would give it a try. His computer doesn't connected to W