Hi all could  any body  forward me application forms reading material

Hi all,
I am working on application forms, can anybody send me the related material
my mail id:::::::[email protected]
Regards,
Sri

Hi,
Could u plz send me wht applcation forms reading materail u want . i will send it to u....
regards,
sana m.

Similar Messages

  • I had a trouble with my lap top and had to format hard disk and install all soft ware again. could any body tell me how to transfer the application and data in my i phone back to my laptop.

    I had a trouble with my lap top and had to format hard disk and install all soft ware again. could any body tell me how to transfer the application and data in my i phone back to itune.

    You can't. It still thinks that your iPhone is synced with another iTunes library (the one that you had before you reformatted the hard drive.

  • Could any body tell me the significance of Partner Profiles in IDOC PROCESS

    Hi,
    Could any body tell me the significance of Partner Profiles in IDOC process.
    Thanks in Advance,
    BSV.

    Hi,
    The partner profile is used to validate the sender and receiver system for a given message type and to assign to the correspondence process code (function module) to post the IDoc to application system.
    This applies for both Inbound and Outbound IDOC's.
    Also please check this link for more information.
    http://help.sap.com/saphelp_46c/helpdata/en/dc/6b803343d711d1893e0000e8323c4f/frameset.htm
    Regards,
    Ferry Lianto

  • Could any body give me the FICO and MM flows

    hi, this kalyan
            could any body give me the FICO and MM flows

    Hi,
    Check this out.
    FICO Module:
    Please chcek this link and go to SAP R/3 Enterprise Application Components ->
    Cross-Application Components -> Financial.
    http://help.sap.com/saphelp_470/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
    you will go through this link
    http://www.sapgenie.com/sapfunc/fi.htm
    Check this Link it out
    http://www.sap-img.com/sap-download/sap-tables.zip
    FI :
    http://www.thespot4sap.com/IntroTo/SAP_FI_Module_Introduction.asp
    http://www.thespot4sap.com/IntroTo/SAP_CO_Module_Introduction.asp
    for tables check out link..
    http://www.sapgenie.com/abap/tables_fi.htm
    Take a look at this.
    http://www.sap-img.com/sap-fi.htm
    Please chcek this link and go to SAP R/3 Enterprise Application Components ->
    Cross-Application Components -> Financial.
    http://help.sap.com/saphelp_470/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
    you will go through this link
    http://www.sapgenie.com/sapfunc/fi.htm
    http://www.erpgenie.com/sapfunc/fi.htm
    http://www.sap-img.com/index.htm
    http://www.amazon.com/Configuring-SAP-Essential-Financial-Controlling/dp/0782125972
    MM module:
    http://www.sapfunctional.com/MM/MainPage.htm
    For MM tables: refer
    Re: MM FLOW
    Reward points if helpful.
    Regards,
    Ramya

  • Could any body explain the step by step procedure of creation of BOM in DP?

    Hi,
    Could any body explain the step by step procedure of creation of BOM in DP?
    Is there any document available to create the step by step procedure?
    Please mail to this Id:[email protected]
    Regards,
    Chow.

    Look at this source
    http://help.sap.com/saphelp_scm41/helpdata/en/62/944d40cef71059e10000000a155106/frameset.htm
    The steps are very simple
    (1) PreRequisite: There should be a SNP/PPDS PDS  generated either from R3 BOM/Routing or APO IPPE object
    (2) Use the transaction mentioned earlier- /SAPAPO/CURTO_GEN_DP - Generate DP Production Data Structure
    Let us know If you are looking for the settings which are to be used in the transaction mentioned above
    or
    You need to know how to create the SNP/PPDS PDS or IPPE object
    Regards
    Kumar

  • Hi all can any bady forward me questionier for developing blue print in CRM

    hi friends
    Hi all can any bady forward me questionier for developing blue print in CRM Sales and Service
    my peronal email id is- [email protected]
    goods suggetion will be awarded
    gegds
    devi

    Dear Devi,
    You have taken a good decision.
    CR Docs:
    http://mysapbi.blogspot.com/2006/12/sap-crm-tutorials.html
    Sap CRM Help:
    http://help.sap.com/saphelp_crm50/helpdata/en/1a/023d63b8387c4a8dfea6592f3a23a7/frameset.htm
    SAP Building Block Library:
    http://help.sap.com/bp_bblibrary/600/BBlibrary_start.htm
    Service MarketPlace:
    https://websmp210.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000288472004E
    SDN CRM Links:
    Links to CRM Documentation
    Hope this helps you.
    Do award points if you found them useful.
    Regards,
    Rakesh

  • Could any body help me , I lost my iphone so how can i get it back , I didn't download find my i phone , but i have the box with the serial number

    MY iPhone is lost & i dont have find my phone app also i dont have Icloud
    I know the simcard number & the serial Number which incloud the box for the iphone
    Could any body help me to locate my iphone ?!!

    What To Do If Your iDevice Is Lost Or Stolen
    iPhone, iPod Touch, and iPad
    If you activated Find My Phone before it was lost or stolen, you can track it only if it is connected to the Internet by Wi-Fi or cellular. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
    If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
    This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
      1. Reporting a lost or stolen Apple product
      2. Find my lost iPod Touch
      3. AT&T. Sprint, and Verizon can block stolen phones/tablets
      4. What-To-Do-When-Iphone-Is-Stolen
      5. iCloud- Use Lost Mode
      6. What to do if your iOS device is lost or stolen
      7. 6 Ways to Track and Recover Your Lost/Stolen iPhone
      8. Find My iPhone
      9. Report Stolen iPad | Stolen Lost Found Online
    It pays to be proactive by following the advice on using Find My Phone before you lose your device:
      1. Find My iPhone
      2. Setup your iDevice on iCloud
      3. OS X Lion/Mountain Lion- About Find My Mac
      4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)

  • Select  all and dselect all can any body provide a code for these buttons

    hi
    i have taken 4 buttons for select  all and dselect all  and sort up and sort down can any body provide a code for these buttons.
    thanks

    hi,
    Refer this link...
    code for select_all and deselect_all in modulepool

  • Could any body explain me the input arguments to EXEC( );

    in API i Found the function Runtime.getRuntime.exec( ) in six overloaded ways.
    1. Process exec(String command)
    2. Process exec(String[] cmdarray)
    3. Process exec(String[] cmdarray, String[] envp)
    4. Process exec(String[] cmdarray, String[] envp, File dir)
    5. Process exec(String cmd, String[] envp)
    6. Process exec(String command, String[] envp, File dir)
    can any body could explain me explain about
    command, cmdarray, envp & dir

    in API i Found the function Runtime.getRuntime.exec(
    ) in six overloaded ways.What specifically did you not understand about the explanation of the parameters in the javadocs?

  • Could any body suggest hoe to tune this SELECT stmt?

    DATA : BEGIN OF it_bkpf OCCURS 100,
             bukrs  LIKE bkpf-bukrs,
             belnr  LIKE bkpf-belnr,
             gjahr  LIKE bkpf-gjahr,
             blart  LIKE bkpf-blart,
             budat  LIKE bkpf-budat,
             usnam  LIKE bkpf-usnam,
             dbblg  LIKE bkpf-dbblg,
             stblg  LIKE bkpf-stblg,
             stjah  LIKE bkpf-stjah,
             bktxt  LIKE bkpf-bktxt,                    
             grpid  LIKE bkpf-grpid,                    
             awkey  LIKE bkpf-awkey, 
             tcode  LIKE bkpf-tcode,                       
             END OF it_bkpf.
       SELECT bukrs belnr gjahr blart budat usnam dbblg stblg stjah
             bktxt grpid awkey  tcode                          
             INTO TABLE it_bkpf
         FROM bkpf
         WHERE bukrs IN s_bukrs AND
               budat IN postdate AND
               blart IN s_blart AND
                blart in s_blart1 and                         
               usnam IN s_usnam
         %_HINTS ORACLE 'INDEX(BKPF BKPF______Z1)'.
    Could you please suggest what is wrong or how to tune this SELECT stmt?

    hi,
        for increasing  perfomance of the select statement , check u r using the <b>Proper Index</b> of the table( table contains primary index and secondary index).
    once u also check, u provide the low and high values to <b>s_bukrs</b> , <b>s_blart</b>  , <b>s_usnam</b> all these fields( if u define using select-options statement) otherwise it will check from its low value to final value.
        Keep the selected data amount be small.
    for furthur refarence u follow these links.
    http://www.sapbrain.com/ARTICLES/TECHNICAL/optimization/optimization.html
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/abap/abapPerformanceand+Tuning&
    http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
    regards,
    AshokReddy.

  • On backing up my Iphone4 because I lost my contacts I lost my work email could any body help me restore it thanks Greg.

    Hi on backing up my Iphone 4 to the computer cause I lost my contacts it found my contacts but lost my work email which is Education Queensland I had my own email plus Icloud and then my work so I was hoping some one could help me restore it.
    Thanks Greg,

    Hi on backing up my Iphone 4 to the computer cause I lost my contacts it found my contacts but lost my work email which is Education Queensland I had my own email plus Icloud and then my work so I was hoping some one could help me restore it.
    Thanks Greg,

  • Ever since upgrating to ios 8.2  certain apps, delay opening or don't open at all.  Any body out there having the same issues?

    How do I get Apps to open up immediately after installing iOS 8.2

    I have exactly the same issue.
    Iphone 6/ IOS8.2 - Mitsubishi Outlander PHEV (Buitlin Mitsubishi Multimedia system)
    BT Streaming - BT Conneciton drops evey couple of seconds
    BT Phone calls - BT connection drops every now and then.
    I see the BT icon disappearl every now and then on the radio's screen even when the connection is not in use.
    Ipad AIR-2 / Logitech thin keyboard cover:
    BT conneciton lost often.
    Come on Apple! Fix this!!!

  • This trigger giving mutation error? any body can tell why?

    Hi All,
    Could any body tell me where is the problem in my trigger.
    my tables are.
    1) EMP :- emp_id,emp_movement_status
    2) EMPLOYEES_DAILY_MOVEMENT :- emp_id,transaction_time,transaction_remarks.
    if i delete a entry from transactions_table, it has to take latest remarks from the maximum record after deletion of the record, then update EMP table accordingly.
    trigger is:-
    CREATE OR REPLACE TRIGGER change_employee_status AFTER INSERT OR UPDATE OR DELETE ON
    employees_daily_movement FOR EACH ROW
    DECLARE
    local_remarks VARCHAR2(50);
    BEGIN
    IF DELETING THEN
    SELECT transaction_remarks INTO local_remarks FROM employees_daily_movement WHERE
         transaction_id = (SELECT MAX(transaction_id) FROM employees_daily_movement WHERE
         emp_id = :old.emp_id );
    /* here im expecting to take the TRANSACTION_REMARKS column value from employees_daily_movement after deleting the record which i wanted */
    UPDATE emp SET emp_movement_status = local_remarks WHERE emp_id = :old.emp_id;
    END IF;
    END;
    Thanks in advance

    Hi Mr Rao,
    You can handle muttating erros with following
    1. Database version is oracle 9i and above, you can over come this problem for ever by using pragma autonomous_transaction.
    2. Another way is, if you database version earlier to 9i then you can re-pharase this trigger by writting statement level trigger instead row level.
    Cheers!!
    Mahesh Ragineni

  • Can any body tell me, how to send/receive the sms from java application

    Hi All,
    Can any body tell me, how to send/receive the sms from java application to mobile phones.
    I have installed the jsms engine and when i try to connect to the mobile device ,the jsms server is giving
    the following error.
    Cannot connect to GSM Device, error : -11

    The best place to ask your question is at the JSMS website, forum or mailing list since this is no error that directly comes from a class belonging to the core Java classes.

  • Could any one tell me what is the difference between swfloader and module loader?

    Hi  All,
                          Could any one tell me what is the difference between SWFLoader and Module Loader in Flex3 in detail?

    Hi,
    ModuleLoader is a kind of strange API that is really just intended to look like SwfLoader for modules that contain a single visual component, and hides most of the module loading infrastructure, which is all about class factories.
    What I mean by "only loaded once" is that if you have several places in the code that call the ModuleManager.getModule("url").load() call, it will only ever get loaded over the wire and interpreted once, subsequent "loads" will just re-dispatch pseudo-load events to the new client.  In other words, the class factory is a singleton for a given url. Unloading is a totally different story.  As you note, not everything is truly unloadable, because there may be lots of references to stuff in
    the module that will keep it alive and un-GC'ed.
    I suggest playing with the low-level API so that you understand the backing implementation, and this should help you understand the limits of ModuleLoader.
    The main difference between modules and applications is that modules have lower overhead, and they only ever get loaded once, no matter how many times you load them. If you're using the ModuleLoader API, keep in mind that you're losing about half the functionality of the module system.  I will assume that you are, because otherwise it would be obvious where to expose methods.  You might want to play around with the lower level ModuleManager API just to get a hang of what's going on - ModuleLoader is a pretty thin veneer over the lower API.                
                    Basically, what you want to do is to have your module implement an interface, say IModuleWhatever.
    Also try and refer to this link which was previously discussed in this forum..
    http://forums.adobe.com/message/74404
    Thanks,
    Bhasker

Maybe you are looking for