Hi all......................i have a query in kmat configurabale material

Please help me its very urgent
Ticket: regarding duplication of requirements being triggered in MRP.
In this regard, I have already communicated to you that we identified following reasons are contributing factor for duplication of requirements in MRP.
1. Sale orders (after diversion) need to be deleted after order settlement (Need to be implemented through APSS).
2. We have been loading MRP on FERT, when the K-MAT order received, it creates additional requirement (since FERT has got prefix in Arrangement number). Hence we have already defined our BOM in line with KMAT configuration.
As I requested you, we require Consultant for 2 to 3 days at CPIPL to tryout loading MRP (as per KMAT configuration) in Quality server and move the same to Production server. If you have any other better options, we would like to hear from Consultant.
Request your support in this regard.

hi,
nobody can understand ur requirement ,
please be clear in communicating !!!!!!!!!!!!

Similar Messages

Count all records in a query

Hi all,
I have a query for debtors. This query is working fine. In query output, I just want a number that contains total no of records present in a query. How can i do that? Is that possible in BI??
Regards,
Aisha Ishrat
ICI Pakistan Ltd

Just create a New formula in the querry and put in the formula... in the result column u will get the desired out put....
Khaja

Display count of all records in a query on VC

Hi all,
I have a query for debtors. I want that on VC, only the no of document present in that query should be displayed instead of all documents in a chart or table. Is that possible on dash board? If yes then how??
Regards,
Aisha Ishrat
ICI Pakistan Ltd.

If it's an SQL query then do a: "select count(*) from table_debtors where ......"
Or you can use the Sigma operator. Just add this between your data source and the output table. When configuring the operator choose "count" for the fields.
Henning
Edited by: Henning Strand on Jan 22, 2008 8:04 AM

Do all users of an Excel workbook need to have Power Query installed?

If I create an Excel file that makes use of Power Query to fetch data, do all users that will open this file require Power Query be installed on their system?
Shawn Keene

Yes, they do need to have power query installed. If you fetch data using Power Query, that adds a new type of connection to the list of connections in that workbook. To refresh that connection, you need the Power Query addin to be installed and run.
Thanks
Zafar Abbas

Hi all......................i have a query related to spl bus process

hi all hero's,
i have a query related to spl bus process.
while configuration of spl bus process there is no any problem and while it comes to billing
a ticket will rise and its integration with fi-sd and i e
missing data G/L account.
can any body solve it plz
regards,
balaji

G/L assignment requires to be maintained in T.Code VKOA.
If you check where the error is:
T.Code: VF02 - Enter Billing Document Number --> "(on the topmost Blue line) Environment --> Account Determination analysis --> Revenue Account.
Here you will get all the condition type & you can analyse where theerror is.
Regards,
Rajesh Banka

The target element was not found, so all intermediate elements were ignored. As a result, an incorrect element that matches the target element's search properties can be found. Verify that all intermediate elements in Query Id have valid and unique search

Hi All,
I am using CUIT to write automated UI test cases. I have a dialog containing few edit control and buttons.
While running the test it is able to click the button.
However I am getting few warnings as below.
The target element "Technology Name: 'MSAA';Search Configuration: 'VisibleOnly'; Search Properties - ControlType : 'Button',Name : 'OK'" was not found, so all intermediate elements were ignored. As a result, an incorrect element that matches the target
element's search properties can be found. Verify that all intermediate elements in Query Id have valid and unique search properties.
Technology Name: 'MSAA'
Search Configuration: 'VisibleOnly'
Search Properties -
ControlType : 'Button'
Name : 'OK'
Mouse button : 'Left'
I need to resolve these warning. Can anybody suggest me how to resolve these warnings.

Hi sanjay_t,
From these warning message as you provide, I doubt that maybe the button control did not be found successfully by the searchproperties when you playback the Coded UI test.
So I suggest you can try to use DrawHighlight Method to check if the button control
is found before you perform actions on the button target control.
(2)I suggest you can try to use
FindMatchingControls Method on the button control to check if there are more than one control which matches the specified searchproperties and filterproperties.
In addition, as you said that you are using CUIT to write automated UI test. it means that you record the UI action by handing code, am I right?
If yes, I suggest that you can create a simple coded UI test through recording actions using Coded UI Test Builder. Then
generate the code and then try to playback. If playback succeeds, then cross check the properties from UIMap.Designer.cs file. You can reference the code about entering values in the text edit in the UIMap.Designer.cs file to write
your own code.
For more information about how to find a control for coded UI test, I suggest you can refer the following blog.
http://blogs.msdn.com/b/balagans/archive/2009/12/28/9941582.aspx
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Getting a "Displaying only the newest results below. To view all results, narrow your query by adding a filter" message in error

I have a list with almost 10000 items. I have a view that should be returning 8 items. For me, the Farm Admin, I see the full set of expected values. The message "Displaying only the newest results below. To view all results, narrow your query by
adding a filter" shows for other users. This makes no sense -
there ARE filters on this view. I'd rather not increase the throttle limit.
Anthony Kelly

Hi Ajk,
Check that the list is not scoped by an audience; but, I'm afraid that either way admin, (e.g. non Farm admin or site collection admin)
I'd recommend exporting to excel, create two new spreadsheets and then import as custom lists.
Best of luck and cheers,
Stacy Anothersharepointblog.blogspot.com

RMAN-05556: not all datafiles have backups that can be recovered to SCN

Oracle 11.2.0.2 SE-One
Oracle Linux 5.6 x86-64
Weekly refresh of a test db from prod, using rman DUPLICATE DATABASE, failed with “RMAN-05556: not all datafiles have backups that can be recovered to SCN”
Background Summary:
Weekly inc 0 backup of production starts on Sunday at 0100, normally completes around 1050. Includes backups of archivelogs
Another backup of just archivelogs runs on Sunday at 1200, normally completes NLT 1201.
On the test server, the refresh job starts on Sunday at 1325. In the past this script used a set until time \"to_date('`date +%Y-%m-%d` 11:55:00','YYYY-MM-DD hh24:mi:ss')\"; -- hard-coded for ‘today at 11:55’.
For a variety of reasons I decided to replace this semi-hard coding of the UNTIL with a value determined by querying the rman catalog, getting the completion time of the inc 0 backup. This tested out just fine in my vbox lab, even when I deliberately drove some updates and log switches during the period the backup was running. But the first time to go live I got the above reported error.
Details:
The key part of the inc 0 backup is this (run from a shell script)
export BACKUP_LOC=/u01/backup/dbprod
$ORACLE_HOME/bin/rman target=/ catalog rman/***@rmcat<<EOF
configure backup optimization on;
configure default device type to disk;
configure retention policy to recovery window of 2 days;
crosscheck backup;
crosscheck archivelog all;
delete noprompt force obsolete;
delete noprompt force expired backup;
delete noprompt force expired archivelog all;
configure controlfile autobackup on;
configure controlfile autobackup format for device type disk to '$BACKUP_LOC/%d_%F_ctl.backup';
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT   '$BACKUP_LOC/%U.rman' MAXPIECESIZE 4096 M;
sql "alter system archive log current";
show all;
backup as compressed backupset archivelog all delete all input format "$BACKUP_LOC/%U.alog";
backup as compressed backupset incremental level 0 database tag tag_dbprod;
sql "alter system archive log current";
backup as compressed backupset archivelog all delete all input format "$BACKUP_LOC/%U.alog";
list recoverable backup;
EOF
The archivelog-only backup (runs at noon) looks like this:
export BACKUP_LOC=/u01/backup/dbprod
$ORACLE_HOME/bin/rman target=/ catalog rman/***@rmcat<<EOF
configure backup optimization on;
configure default device type to disk;
configure retention policy to recovery window of 2 days;
crosscheck backup;
crosscheck archivelog all;
delete noprompt force obsolete;
delete noprompt force expired backup;
delete noprompt force expired archivelog all;
configure controlfile autobackup on;
configure controlfile autobackup format for device type disk to '$BACKUP_LOC/%d_%F_ctl.backup';
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT   '$BACKUP_LOC/%U.rman' MAXPIECESIZE 4096 M;
sql "alter system archive log current";
show all;
backup as compressed backupset archivelog all delete all input format "$BACKUP_LOC/%U.alog";
list recoverable backup;
EOF
And the original refresh looked like this:
>> a step to ftp the backups from the prod server to the test server, and some other housekeeping <<, then
cd /backup/dbtest
echo "connect catalog rman/***@rmcat" > /backup/dbtest/dbtest_refresh.rman
echo "connect target sys/*******@dbprod" >> /backup/dbtest/dbtest_refresh.rman
echo "connect auxiliary /"             >> /backup/dbtest/dbtest_refresh.rman
echo "run {"                           >> /backup/dbtest/dbtest_refresh.rman
echo "set until time \"to_date('`date +%Y-%m-%d` 11:55:00','YYYY-MM-DD hh24:mi:ss')\";" >> /backup/dbtest/dbtest_refresh.rman
echo "duplicate target database to DBTEST;" >> /backup/dbtest/dbtest_refresh.rman
echo "}" >> /backup/dbtest/dbtest_refresh.rman
So, my mod to the refresh was
bkup_point=`sqlplus -s rman/***@rmcat <<EOF1
set echo off verify off feedback off head off pages 0 trimsp on
select to_char(max(completion_time),'yyyy-mm-dd hh24:mi:ss')
from rc_backup_set_details
where db_name='DBPROD'
and backup_type='D'
and incremental_level=0
exit
EOF1`
cd /backup/dbtest
echo "connect catalog rman/***@rmcat"     > /backup/dbtest/dbtest_refresh.rman
echo "connect target sys/*******@dbprod"    >> /backup/dbtest/dbtest_refresh.rman
echo "connect auxiliary /"                >> /backup/dbtest/dbtest_refresh.rman
echo "run {"                              >> /backup/dbtest/dbtest_refresh.rman
echo "set until time \"to_date('${bkup_point}','YYYY-MM-DD hh24:mi:ss')\";" >> /backup/dbtest/dbtest_refresh.rman
echo "duplicate target database to DBTEST;" >> /backup/dbtest/dbtest_refresh.rman
echo "}"                                  >> /backup/dbtest/dbtest_refresh.rman
Now the fun begins.
First, an echo in the refresh script confirmed the ‘bkup_point’:
=======================================================
We will restore to 2013-08-25 10:41:38
=======================================================
Internally, rman reset the ‘until’ as follows:
executing command: SET until clause
Starting Duplicate Db at 25-Aug-2013 15:35:44
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=162 device type=DISK
contents of Memory Script:
   set until scn 45633141350;
Examining the result of LIST BACKUP (the last step of all of my rman scripts) the full backup shows this:
BS Key Type LV Size       Device Type Elapsed Time Completion Time
5506664 Full 61.89M     DISK        00:00:03     25-Aug-2013 02:11:32
        BP Key: 5506678   Status: AVAILABLE Compressed: NO Tag: TAG20130825T021129
Piece Name: /u01/backup/dbprod/DBPROD_c-3960114099-20130825-00_ctl.backup
SPFILE Included: Modification time: 24-Aug-2013 22:33:08
SPFILE db_unique_name: DBPROD
Control File Included: Ckp SCN: 45628880455   Ckp time: 25-Aug-2013 02:11:29
BS Key Type LV Size       Device Type Elapsed Time Completion Time
5507388 Incr 0 206.03G    DISK        08:30:00     25-Aug-2013 10:41:30
List of Datafiles in backup set 5507388
File LV Type Ckp SCN    Ckp Time             Name
1    0 Incr 45628880495 25-Aug-2013 02:11:38 +SMALL/dbprod/datafile/system.258.713574775
>>>>>>>>> snip lengthy list <<<<<<<<<
74   0 Incr 45628880495 25-Aug-2013 02:11:38 +SMALL/dbprod/event_i2.dbf
Backup Set Copy #1 of backup set 5507388
Device Type Elapsed Time Completion Time      Compressed Tag
DISK        08:30:00     25-Aug-2013 10:41:36 YES        TAG_DBPROD
    List of Backup Pieces for backup set 5507388 Copy #1
    BP Key Pc# Status      Piece Name
    5507391 1   AVAILABLE   /u01/backup/dbprod/eeoi55iq_1_1.rman
    >>>>>>>>>>>>> snip lengthy list <<<<<<<<<<<
    5507442 52 AVAILABLE   /u01/backup/dbprod/eeoi55iq_52_1.rman
Notice the slight difference in time between what is reported in the LIST BACKUP and what was reported by my query to the catalog.
Continuing with the backup list, the second archivelog backup in the script generated six backupsets. The fifth set showed:
BS Key Size       Device Type Elapsed Time Completion Time
5507687 650.19M DISK        00:02:18     25-Aug-2013 10:54:53
        BP Key: 5507694   Status: AVAILABLE Compressed: YES Tag: TAG20130825T104156
Piece Name: /u01/backup/dbprod/ekoi643j_1_1.alog
List of Archived Logs in backup set 5507687
Thrd Seq     Low SCN    Low Time             Next SCN   Next Time
1    1338518 45632944587 25-Aug-2013 05:58:18 45632947563 25-Aug-2013 05:58:20
    >>>>>>>>>>>>> snip lengthy list <<<<<<<<<<<
1    1338572 45633135750 25-Aug-2013 10:08:21 45633140240 25-Aug-2013 10:08:24
1    1338573 45633140240 25-Aug-2013 10:08:24 45633141350 25-Aug-2013 10:30:06
1    1338574 45633141350 25-Aug-2013 10:30:06 45633141705 25-Aug-2013 10:41:51
1    1338575 45633141705 25-Aug-2013 10:41:51 45633141725 25-Aug-2013 10:41:55
Notice the availability of the archivelogs including the referenced scn.
Investigation of the ftp portion of the refresh script confirmed that all backup pieces were copied from the prod server.
So what am I overlooking? Having reverted back to the original script to get the refresh completed,

HemantKChitale wrote:
So, technically, you only need the database and archivelogs backed up by the database script and not the noon run of the archivelog backup.
backup as compressed backupset archivelog all delete all input format "$BACKUP_LOC/%U.alog";
backup as compressed backupset incremental level 0 database tag tag_dbprod;
sql "alter system archive log current";
backup as compressed backupset archivelog all delete all input format "$BACKUP_LOC/%U.alog";
Yet, why does backupset 5 of the noon archivelog backup show archivelogs from 10:30 to 10:40 if they had been deleted by the database backup script which has a delete input ? It is as if the database backup script did NOT delete the archivelogs and the noon run was the one to backup the archivelogs (again ?)
No, that is from the morning full backup. Note the 'Completion Time" of 25-Aug-2013 10:54:53
However, the error message seems to point to a datafile. Why would reverting the recovery point to 11:55 make a difference, I wonder.
As do I.
Also puzzling to me are the times associated with the completion of the backups. I don't recall ever having to scrutinize a backup listing this closely so I'm sure it's just a matter of filling in some gaps in my understanding, but I noticed this. The backup report (list backup;) shows this for the inc 0 backup:
BS Key Type LV Size
Device Type Elapsed Time Completion Time
5507388 Incr 0 206.03G
DISK
08:30:00
25-Aug-2013 10:41:30   ------- NOTE THE COMPLETION TIME ----
List of Datafiles in backup set 5507388
File LV Type Ckp SCN
Ckp Time
Name
1
0 Incr 45628880495 25-Aug-2013 02:11:38 +SMALL/dbprod/datafile/system.258.713574775
------ SNIP ------
74   0 Incr 45628880495 25-Aug-2013 02:11:38 +SMALL/dbprod/event_i2.dbf
Backup Set Copy #1 of backup set 5507388
Device Type Elapsed Time Completion Time
Compressed Tag
DISK
08:30:00
25-Aug-2013 10:41:36 YES
TAG_DBPROD   ------- NOTE THE COMPLETION TIME ----
List of Backup Pieces for backup set 5507388 Copy #1
BP Key Pc# Status
Piece Name
5507391 1   AVAILABLE   /u01/backup/dbprod/eeoi55iq_1_1.rman
------ SNIP ------
5507442 52 AVAILABLE   /u01/backup/dbprod/eeoi55iq_52_1.rman
Then the autobackup of the control file immediatly following:
BS Key Type LV Size
Device Type Elapsed Time Completion Time
5507523 Full
61.89M
DISK
00:00:03
25-Aug-2013 10:41:47   ------- NOTE THE COMPLETION TIME ----
BP Key: 5507587   Status: AVAILABLE Compressed: NO Tag: TAG20130825T104144
Piece Name: /u01/backup/dbprod/DBPROD_c-3960114099-20130825-01_ctl.backup
SPFILE Included: Modification time: 25-Aug-2013 05:57:15
SPFILE db_unique_name: DBPROD
Control File Included: Ckp SCN: 45633141671   Ckp time: 25-Aug-2013 10:41:44
Then the archivelog backup immediately following (remember, this created a total of 5 backupset, I'm showing number 4)
BS Key Size
Device Type Elapsed Time Completion Time
5507687 650.19M
DISK
00:02:18
25-Aug-2013 10:54:53   ------- NOTE THE COMPLETION TIME ----
BP Key: 5507694   Status: AVAILABLE Compressed: YES Tag: TAG20130825T104156
Piece Name: /u01/backup/dbprod/ekoi643j_1_1.alog
List of Archived Logs in backup set 5507687
Thrd Seq
Low SCN
Low Time
Next SCN   Next Time
1
1338518 45632944587 25-Aug-2013 05:58:18 45632947563 25-Aug-2013 05:58:20
------ SNIP ------
1
1338572 45633135750 25-Aug-2013 10:08:21 45633140240 25-Aug-2013 10:08:24
1
1338573 45633140240 25-Aug-2013 10:08:24 45633141350 25-Aug-2013 10:30:06
1
1338574 45633141350 25-Aug-2013 10:30:06 45633141705 25-Aug-2013 10:41:51
1
1338575 45633141705 25-Aug-2013 10:41:51 45633141725 25-Aug-2013 10:41:55
and the controlfile autobackup immediately following:
BS Key Type LV Size
Device Type Elapsed Time Completion Time
5507984 Full
61.89M
DISK
00:00:03
25-Aug-2013 10:55:07   ------- NOTE THE COMPLETION TIME ----
BP Key: 5508043   Status: AVAILABLE Compressed: NO Tag: TAG20130825T105504
Piece Name: /u01/backup/dbprod/DBPROD_c-3960114099-20130825-02_ctl.backup
SPFILE Included: Modification time: 25-Aug-2013 05:57:15
SPFILE db_unique_name: DBPROD
Control File Included: Ckp SCN: 45633142131   Ckp time: 25-Aug-2013 10:55:04
and yet, querying the rman catalog
SQL> select to_char(max(completion_time),'yyyy-mm-dd hh24:mi:ss')
2 from rc_backup_set_details
3 where db_name='DBPROD'
4 and backup_type='D'
5 and incremental_level=0
6 ;
TO_CHAR(MAX(COMPLET
2013-08-25 10:41:38
SQL>
which doesn't match (to the second) the completion time of either the full backup or the associated controlfile autobackp.
Hemant K Chitale
I hope this posts in a readable, understandable manner. I really struggeled with the 'enhanced editor', which I normally use. When I pasted in blocks from the rman report, it kept trying to make some sort of table structure out of it .... guess I'll have to follow that up with a question in the Community forum ....

Mail merge doesn't see all records in Access query

Office 13 running on Win 8.1.
I have a query in Access that show 4 records when I run it. If I specify this query as my data source (select recipients) and then choose to edit the recipient list, there are only two records! The query in Access looks like this:
SELECT Membership.[m-nbr], Membership.[m-first], Membership.[m-member-since], Membership.[m-pick], Contact.[c-zip], Regions.[r-region-name], Regions.[r-region-director], Regions.[r-region-email], Membership.[m-member-since], Associates.[a-first-name], Associates.[a-id]
FROM ((Membership INNER JOIN Contact ON Membership.[m-nbr] = Contact.[c-nbr]) INNER JOIN (Regions INNER JOIN [Region/State] ON Regions.[r-region] = [Region/State].[rs-region]) ON Contact.[c-state] = [Region/State].[rs-state]) LEFT JOIN Associates ON Membership.[m-nbr]
= Associates.[a-nbr]
WHERE (((Membership.[m-pick])=True) AND ((Associates.[a-id]) Like "*A" Or (Associates.[a-id]) Is Null) AND ((Year([m-member-since]))=Year(Date())))
ORDER BY Contact.[c-zip];
If I remove this part: "((Associates.[a-id) Like "*A" Or (Associates.[a-id] is Null AND" then all 4 records show up in the recipient list.
In short, members can have multiple associates, but only the"A" associate is to be included in this letter. (associates have the same number as the member, with an a,b,c etc. appended. A member number could be 8741 and an associate number 8741A.
Why is this happening? Thanks, ~Steve
Steve Woodward

Hmm, I tend to work in SQL mode when creating queries in Access - in that case, it doesn't change what you write. But I see that in the tabular Design mode it does change to ALIKE and that it works OK - something I wasn't aware of. I read that ALIKE is supposed
to allow "%" and "_" even when the database is in "Jet mode.
FWIW in ANSI mode, I would not expect LIKE "%a" to work in Access but it should work from OLE DB
But in any case, it still works OK here, so still not sure what is wrong.
As a workaround, it might be necessary either to export the query results from Access, then use the exported data as your source, use the query to create a new table and use that as the data source, or connect using DDE (to do that, in Word, you have to
check Options->Advanced->General->Confirm file format conversion on open. Then go through the connection process again and select the .accdb/.mdb. If it's a .accdb, you will have also have to check "Show all" when you get to the "Confirm Data Source"
dialog box. At that point, you need to select the "MS Access Databases via DDE" option from the list (even if you have a .accdb, which isn't listed in the file types for that connection method).
All of these approaches have their disadvantages (e.g. DDE may not connect easily and probably won't return Unicode data correctly) but may at least give you another avenue of investigation.
Peter Jamieson

Execute a command only after all subscribers have consumed their messages

Let's say we have queue Q1 and we enqueue two messages M1 and M2. Q1 has three subscribers S1, S2, and S3. We want to execute some process P1 only after ALL subscribers (S1-S2-S3) have consumed all of their message (M1-M2). Is this something Q1 would know about (it knows once all subscribers have processed all their messages) so that on "ALL Done" event it can start P1 either directly or by enqueuing a message for another subscriber, or is this something that requires hand-written code that would keep track of who has dequeued what and execute P1 once everybody is done.

what you can do is to right another piece of code querying queue table on regular basis. When your query is returning 0 count that shows that all messages have been dequeued.

Displaying only the newest results below. To view all results, narrow your query by adding a filter.

Hi,
In one of my list there are 33,000 records.
It gives message "Displaying only the newest results below. To view all results, narrow your query by adding a filter."
I don't want to change my threshold limit. Can anybody please tell me steps to resolve this issue?
Regards,
Amit Khatri

I have a list of 11,000 items. Even though I have setup filters on it and it shows all 10 records based on that filter, it still shows that warning on top. For some items, even with those filters, I don't see the list items at all. How do I deal with
this situation. I don't want to change my threshold limits from CA either. Please help.
MAK

Who can decode this who ever can I will give 4 dukes cause thats all i have

who ever is the first to decode this and tell me what it says I will give you 4 duke dollars since that is all I have here it is
vs.vo.~

seeing something
vszz}.vss

HT1430 my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

There is a hardware problem. Whether it's worth it to you to have no working phone for 2 months until you can update vs paying for replacement/repair now is a question only you can answer.

After trying to update my iphone 5 to ios 7 via itunes my phone will not work at all, all i have is an itunes logo and cable logo on the screen HELP!!!!

after trying to update my iphone 5 to ios 7 via itunes my phone will not work at all, all i have is an itunes logo and cable logo on the screen HELP!!!!

you'll want to restore it using itunes and recovery mode
http://support.apple.com/kb/ht1808

My itunes will not work at all. i have deleted and reinstalled in over ten times, i have ended the process, i have reinstalled quicktime i few times, i have deleted many folders. What else can i do? Please help:(

My itunes will not work at all. i have deleted and reinstalled in over ten times, i have ended the process, i have reinstalled quicktime i few times, i have deleted many folders such as TEMP, itunes helper et What else can i do? Please help:(

Now it sometimes keeps coming up and working but once i plug an ipod in it freezes my whole computer up and no i dont get any response from itunes at all

Hi all......................i have a query in kmat configurabale material

Similar Messages

Maybe you are looking for