Hi all, looking for a code to unlock my handset 4s

hi all, looking for a code to unlock my handset 4s

Contact your mobile carrier. and pay any levies they make .They may need you to confirm the iMEi code.
That iMEi code is then passed to Apple for them to change the status on their servers, and you get a confirmation from your mobile carrier -either text or email. inviting you to connect your phone to iTunes on your PC/Mac .
Follow on screen prompts and your iPhone becomes unlocked.
Or search the greater inter webs with terms for instance say Jailbreak, iPhone unlock etc....
Then take the security consequences for your actions.

Similar Messages

Looking for a code to change networks

hi im looking for a code to change networks can someone please help me

If you mean you want to use a different SIM on your SIM locked iPhone., there is no "code" for that. You need to contact the carrier the phone is locked to. Only they can unlock it. Apple does not unlock phones.

Looking for Source Codes

hi everyone!
I am looking for source codes with the following characteristics:
- significant data processing (like fft or image processing algorithms)
- use of just a few classes and/or packages (it must not use awt or swing)
- code is not so big (200 lines of code at most)
- program is multithreaded (it is not necessary)
If anyone could help me, I would appreciate a lot.
Thanks.

Building a portfolio are we?

Looking for sample code using "first_tab" and "next_tab"

Looking for sample code using "first_tab" and "next_tab". How is it used with ItemID within a dialog box? I've read the reference books - don't understand it.

Hi Ray,
There are several ways to do this, and in the example I created, I actually did not end up using shift registers. I've attached some example code that basically multiplies the period by the duty cycle percentage to achieve the number of milliseconds to be high and low.
You would just need to insert your DIO code in each frame of the sequence structure.
Hope that helps. Kind regards,
-Sam F, DAQ Marketing Manager
Learn about measuring temperature
Learn how to take voltage measurements
Learn how to measure current
Attachments:
70_PWM_Example.vi ‏23 KB

Looking for sample code of pwm output with Labview 7

we are looking for sample code in LabView 7 for producing a pwm output. We are current using a 3rd party digital I/O board and just want to generate a pwm output on several of the bits.

Hi Ray,
There are several ways to do this, and in the example I created, I actually did not end up using shift registers. I've attached some example code that basically multiplies the period by the duty cycle percentage to achieve the number of milliseconds to be high and low.
You would just need to insert your DIO code in each frame of the sequence structure.
Hope that helps. Kind regards,
-Sam F, DAQ Marketing Manager
Learn about measuring temperature
Learn how to take voltage measurements
Learn how to measure current
Attachments:
70_PWM_Example.vi ‏23 KB

Java.lang.instrumentation (looking for examples, code snippets)

I'm exploring the use of java.lang.instrumentation, management for a variety of tasks such as profiling, monitoring, etc.
I'm looking for some code snippets and examples to get me bootstrapped. Didn't find any doing a search.

Unfortunately there aren't any examples of java.lang.instrument usage available yet. I will try to rectify this.
java.lang.instrument.Instrumentation is an interface, but it is not an interface that users of java.lang.instrument implement. A single instance of a class, internal to the JRE, which implements this interface is created if and only if the -javaagent flag is used. This sole instance is then passed into the premain method.
Robert G. Field
JSR-163 Specification Lead

Looking for sample code to create my own pub/sub!

I am a new bee in JMS. So I would really appreciate if
some one could give me some hint to start up with my school project. I am looking for a sample Java code that will:
For the Publisher:
1. Connect to a broker [create it, if it does not exist]
2. Create a publisher/destination.
3. Create a pub-sub queue
4. Publish a message
5. Ack or Nak depending on if the subscriber got or did not get the message.
For the Subscriber:
1. Connect to a broker [create it, if it does not exist]
2. Subscribe to the broker
3. Subscribe to the Queue
4. Show an received messages on the console.
Here are the command line params for both the Publisher and subscriber:
runPub 127.0.0.1:7676 myTestBroker myQueue "this is my message"
runSub 127.0.0.1:7676 myTestBroker myQueue
Please tell me if there are similar java code that will do all this and work with ANY JMS compatible client. i.e. I should not have to use the Admin tool of any JMS Server (MQSeries, iPlanet, SonicMQ etc etc). The code should follow the JMS spec and do this programmatically.
Thank you very very much in advance for doing this great favor.
With regards,
Amir.

Thanks a lot for that hint. I think that's a great tutorial for a beginner. I could compile those sample codes from chapter 4 with out any problem, but could not run it. I also installed j2sdkee1.3.1 and updated my classpath according to the spec. But when I tried to run the "j2ee -verbose" command it was giving me the following error message:
ERROR: Set J2EE_HOME before running this script.
Any advise for me that I should follow next. Thanks again.

Looking for sample code of HOW-TO use EntityFacadeImpl class

I have created the following using JDeveloper Ver 9.0.3.1:
1. Entity Bean
Localinterface: userLocal.java
Local home interface: userLocalHome.java
Remote interface: user.java
Remote home interface: userHome.java
Bean implementation: userBean.java
2. Facade Session Bean (auto generated by JDeveloper)
userFacade.xml
userFacadeColImpl.java
userFacadeImpl.java
I am looking for sample client code on how to make use the facade session bean.
Thanks in advance.

repost

Looking for transaction code in MM to display Business Area, PO, AO,& Values

Hello everyone,
I am looking for a Transaction Code that will display Business Area, Outline Agreement, Purchase Order and Values.
Can anyone recommend?
Ananh

Dear Ananh,
You can try transaction code ME2M and enter the document type and enter the relevent fields to get the required results.
Regards,
Manjunath

Looking for T-code like 9KE0 (Correction Between Profit center)

Hi experts,
Iml looking for a T-code that allows me corrections from a profit center to another one. I used 9KE0 but it allows the correction without control.
(for example when i want to make correction between cost center, it's better to use KB61 than KB11N) I want the same solution for profit centers....
PLZ HELP

like KB11N is not there in PCA. you have to use 9KE0 and use (-/+) signs respectively and you can post the documents.
satish

Looking for Serial Code Security for Dreamweaver Extensions.

Hello
I am looking for a solution or an extension which would allow me to secure my Dreamweaver Extension with a Serial Code so that i can atleast save it from being pirated.
Does anyone have a solution for this ? I would like to purchase it.

Could you please share the following log files from your system so that we could debug this issue.
Files : amt3.log and oobelib.log from /tmp on Mac or %TEMP% on Win).
Please send it to [email protected]
Thanks
Vikas

Looking for sample code to decrypt MYSAPSSO2 session cookie

Hello,
I am looking for a sample code to decrypt MYSAPSSO2 session cookie and get the username out of it.

Hi Roy,
if you just need the username the easiest way is to grab the Cookie and Decode it using Base64. The username is contained in cleartext.
e.g.
MYSAPSSO2 Ticket as fetched from Browser:
AjExMDAgABFwb3J0YWw6bXRyaWNhcmljb4gAE2Jhc2ljYXV0aGVudGljYXRpb24BAApNVFJJQ0FSSUNPAgADMDAwAwADRDAxBAAMMjAwODA3MjUwNTA3BQAEAAAACAoACk1UUklDQVJJQ0%2F%2FAQUwggEBBgkqhkiG9w0BBwKggfMwgfACAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGB0DCBzQIBATAiMB0xDDAKBgNVBAMTA0QwMTENMAsGA1UECxMESjJFRQIBADAJBgUrDgMCGgUAoF0wGAYJKoZIhvcNAQkDMQsGCSqGSIb3DQEHATAcBgkqhkiG9w0BCQUxDxcNMDgwNzI1MDUwNzU5WjAjBgkqhkiG9w0BCQQxFgQUxUGK!5EDTrHQErPQCVJhEySzTBAwCQYHKoZIzjgEAwQvMC0CFQCD3K2A2hrgpNa5EceiDXjRN309ewIUTM3DJi8QTxmk%2FJez!rjnFlTM3BQ%3D
Decoded Ticket using Base64:
1100 uFFFD portal:mtricaricou02C6uFFFD basicauthentication uFFFD
MTRICARICO uFFFD 000 uFFFD D01 uFFFD 200807250507 uFFFD uFFFDuFFFDuFFFD
If you want to do it programmatically using any libraries to completely decode the ticket, check the validity and also access the certificate information inside the ticket you can use a SAP Extension called SAP SSOEXT (Goto service.sap.com/swdc and search for SSOEXT => The package also contains documentation and samples for various programming langauges such as JAVA).
This one needs dynamic libraries or shared libraries to be linked.
There also is a pure JAVA approach.
Have a look at this:
http://www.zope.org/Members/Dirk.Datzert/MySapSsoSupport/
But:
The approach of decrypting the cookie does not really make since when you are in a SAP system it is more intended for 3rd party systems in order to implement SSO.
Hope this helps
Cheers

Beginner looking for sample code

Hello Mobile Developers,
Just got my Flash Builder 4.5 two days ago. I have some Flex and Objective-C experience. I am looking for some example code
showing me how to build a simple "ActionScript Mobile Project" for the iPad. Any links or snippets are welcome.
Is it possible or planned to be possible, to build a native Objective-C Project in XCode and include the ActionScript/AIR features as a Library or
Framework, so that one could mix native UIKit Views with others based on ActionScript ?
Or is it possible to implement ActionScript wrappers around native code ?
Regards,
Dirk

Hi,
Just tried the sample with my Flash Builder 4.5 - without success. The project references a Flex SDK named "superhero". I changed that to Flex 4.5
which is the one that came with Flash Builder.
It seems that the project requires AIR 2.7. Which Flex SDK do I need to run this example ?
Regards,
Dirk

Looking for shockwave coder

Hello, I am currently working on a project for a site,
opsgear.com. I am making a program for them that takes the base
paintball gun for all their mods, and allows the user to add
whatever mods they want on there. It will be a pretty complex
program, because some parts will have to be able to slide along
rails, some parts aren't compatible with other, and some parts,
like scopes, attach on parts at different heights. It will be a lot
of work. Knowledge of weapons would be nice, but not necessary.
Here is the thread that shows all the models,
http://opszone.invisionzone.com/ind...44&hl=converter.
I have already made a deal with them. I had a coder that was
willing to help, but he dopped out. Here is how I would like the
program to work. It is step by step, you start out with the
tippmann a5. Then you hit next, and it goes to stocks, and you pick
a stock, then you hit next, and it goes to handguards, and you pick
a handguard, and so on. When you have picked all your parts it
generates the model with all the parts you have picked on it. Like
I said almost all the models are done, so you have plenty to work
with. You can contact me at [email protected]

Are you manipulaing 3D models or 2d images in shockwave.
Looks like
your rendered model address has been truncated by ...
>
http://opszone.invisionzone.com/ind...44&hl=converter.

Looking for sample code of JSP consumer of XML

Does anyone have info. on how to send XML to a JSP? Hopefully, I can have any client (able to post to http), create the XML, then send it off to a URL which is a JSP. The JSP then parses the XML and builds html based on data from the XML.
Thanks,
Jay

I'm not quite sure I understand what you mean. Do you want someone to be able to send an xml file via Http POST and have you transform that to html to display?
Anyway, here is some code wich may be useful.
The following is from a servlet used to transform data generated from a sql database to xml and to send the xml to a browser:
     response.setContentType("text/xml");
     PrintWriter out         = response.getWriter();
     JDBC2XML jdbc2xml   = new JDBC2XML();
     DataSource ds         = JNDIBean.lookupDataSource(request.getParameter("dsName"));
     out.println(jdbc2xml.execute(ds, request.getParameter("sql")));In the above, the JDBC2XML just generates the xml from the sql.
The following is from a servlet which recieves xml and transforms it to html. The servlet is mapped to *.xsl and uses the xsl file requested to do the transformation.
         TransformerFactory tFactory = TransformerFactory.newInstance();
         //get the real path for xml and xsl files.
         String ctx = getServletContext().getRealPath("") + FS;
         // Get the XML input document and the stylesheet.
         Source xmlSource = new StreamSource(new StringReader(xml));
         Source xslSource = new StreamSource(new URL("file", "", qryDoc).openStream());
         // Generate the transformer.
         Transformer transformer = tFactory.newTransformer(xslSource);
         // Perform the transformation, sending the output to the response.
         transformer.transform(xmlSource, new StreamResult(out));FS in above is: System.getProperty("file.separator");
If you simply want a jsp to display xml using a stylesheet I suggest you use JSTL - it's simple to learn and all the work has already been done for you. BTW, if you so choose, feel free to modify/re-write any of the above code to meet your needs. YMMV.

Hi all, looking for a code to unlock my handset 4s

Similar Messages

Maybe you are looking for