Hi all, May i know how to create filters in Hyperion Planning Application?

Hi all, May i know how to create filters in Hyperion Planning Application?
i don't know how to create filters in Planning Application. but my superior asking me to create filters.
Thanks & Regards,
Sekhar

Go to Administration > Dimensions > Select Dimension > Select the member to want to assign acccess filters to :- Assign Access
Repeat process for all access permissions.
If there is a lot of permissions to set you could use a utility :-http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_admin/ch03s07.html
Refresh Planning including security filters
Also have a read of :- http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_admin/mg_secfilter.html
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

  • May i know how to create Transactional Infocube, Data from cube to cube

    Hi All,
    I need to create a Transactional Infocube. Can anyone help me how to create that. and how it differs from Basic cube while creating Transactional Infocube.
    My other question is how to load data from one cube to another.( is it possible from basic to transactional )
    It's urgent.
    regards,
    Ali

    Hi Ali,
    http://help.sap.com/saphelp_sem60ep1/helpdata/en/7b/a90e78d10311d4b3490050dadfb23f/frameset.htm
    Transactional InfoCubes differ from Basic InfoCubes in their ability to support parallel write accesses. Basic InfoCubes are technically optimized for read accesses .
    Use
    Transactional InfoCubes are used in connection with the entry of planning data. See also Overview of Planning with BW-BPS. The data from this kind of InfoCube is accessed transactionally, meaning data is written to the InfoCube (possibly by several users at the same time). Basic InfoCubes are not suitable for this. You should use Basic InfoCubes for read-only access (for example, when reading reference data).
    transactional infocubes can be filled with data using two different methods: using the transaction of BW-BPS to enter planning data and using BW staging, whereas planning data then cannot be loaded simultaneously.
    Anyway, the data from this kind of infocube is accessed transactionally, meaning data is written to the infocube (possibly by several users at the same time); basic infocubes are not suitable for this. I think this is the only proper use of this type of cube...
    We have an option to switch the Tranasaction cube such as "Loding allowed and Planning not allowed" and "Planning allowed and loading not allowed".
    please check these links,
    http://help.sap.com/saphelp_nw04/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm
    function module to read and write to a transactional infocube
    read and write to transactional infocube
    read and write to a transactional infocube
    Regards,
    Priyanka

  • Error creating a new Hyperion Planning Application

    Hi Everybody,
    I'm trying to create a new application in Hyperion 9, but I have a problem because when I configure the application in the wizard, that show me an error "An error ocurred while processing this page. Check the log for details".
    When I review EAS I see the application but database is not create and the application in Planning doesn't appear.
    I tried checking logs but I never found something (No error in the app server or Logs of application).
    The steps that I followed:
    1. Create a new schema.
    2. Configure Datasource with new schema.
    3. Configure App with wizard.
    Regards.

    First of all you will only see the Application in EAS, the databases are not created until you create them from within planning.
    What I suggest is you delete the application in EAS otherwise it will keep failing, then run planning in the foreground and not as a service, so start it up from the start menu, this way an errors will be outputted to the command window.
    Then try again creating an application.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Hi, may i know how can i get all data back after update ios 6

    Hi,
    May i know how can i get all data back after update ios 6 and all my data lost ?

    You can restore the phone and when prompted to restore choose from icloud account. BUT MAKE SURE there is 1.) an icloud backup for your phone. 2.) you are using the same apple id.
    apl

  • HT201269 one fine day, my i phone just hangup lost all contact detail. The screen only show a picture depicting cable connection to iTune. I have tried to restore iphone to factory setting but not working .  May i know how to proceed to recover lost conta

    one fine day yesterday, my i phone just hangup lost all contact detail. The screen only show a picture depicting cable connection to iTune. I have tried to restore iphone to factory setting but not working .  May i know how to proceed to recover lost contacts.

    I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

  • May i know how to develop this scenario

    Hi Experts,
             can any one help in this scenario, i am getting data from different external system (data comes as flat files from 3 different leagasy systems,  aswell from oracale data base),  i want to post these data to Payroll system(R3). may i know how many file adapters and communicatoin channles do i requre to implement this scenario.
    thanks,
    dhanush

    Dhanush,
    As far as my understanding from ur scenario. You need BPM to achiveve the same.
    You need 4 communication channels from sender side and one receiver channel.
    3 sender channels pointed to 3 different legacy systems and 1 communication channel for Oracle.
    Mapping logic must be N:1
    BPM Logic.
    Fork (4 branches )-->Place receiver step on each branch and check all of them to start the process ---> Transformation step(N:1 Mapping) -
    >Send
    Hope it helps!!
    -raj.

  • May I know how to check whether my WWAN is HSDPA or EV-DO Verizon?

    Hi I just bought a new IBM Lenovo Thinkpad X61. The type is 7675-4KU.
    May I know how to check the WWAN is HSDPA or EV-DO Verizon?
    After I install the driver, how should I do to connect to internet using WWAN??
    Thank You.
    Solved!
    Go to Solution.

    All X61's have the SIM slot, whether they have a WWAN card or not.
    You would also see the WWAN card under Vista: right click Computer > Properties > Device Manager > Network adapters.
    If the Advanced button under ThinkVantage System Information is disabled, either something is wrong with your ThinkVantage Productivity Center setup, or you have a permissions problem.
    I doubt that you have a WWAN card. Your system does not have one by default. You would have had to ask for one to be added when you bought it.
    I don't work for Lenovo. I'm a crazy volunteer!

  • May i know how to Reward points

    hi friends
    may i know how to Reward points  i tried but i coudn't success to give points

    Dear Kishore,
    How to give points: Mark your thread as a question while creating it. In the answers you get, you can assign the points by clicking on the stars to the left. There are 3 radio buttons. Depending on the level of help you have got with the answer you can award points.
    You also get a point yourself for rewarding (one per thread).
    Hope this helps you.
    Do award points if you found them useful.
    Regards,
    Rakesh

  • TS3694 Itunes can't start because MSVCR80.dll is missing from your computer.  I've tried reinstalling but problem continues.  May anyone knows how to fix it?

    Itunes can't start because MSVCR80.dll is missing from your computer.  I've tried reinstalling but problem continues.  May anyone knows how to fix it?

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99395)

  • Does anyone here knows how to create a login page thru JDBC?

    Anyone here knows how to create a login page which connect to database thru JDBC but not JDBC-ODBC bridge?

    Hi..pls you'll do people here a great good if you could explain yourself better..!
    Anyway if you are trying to connect to an Oracle Database you dont need the jdbc-odbc bridge as oracle provides a special driver for java applets/applications that is "the thin driver" and the "oci driver"..so if you are connecting to Oracle your connection will look like this:
    Class.forName("oracle.jdbc.driver.OracleDriver"); //not sun.jdbc.odbc.JdbcOdbcDriver
    Connection con = DriverManager.getConnection ("blah blah, blah");
    no need for the jdbc-odbc bridge.
    I hope i've answered your question.
    Thanks.

  • I need to know how to create a pdf document larger than 129 inches from MS Project 2007

    I am completely new to Adobe Acrobat Pro 9. I need to know how to create a PDF which is larger than 129 inches for use on a plotter from MS Project 2007. I have searched the Adobe support articles with no success. Any help would be appreciated.  Thank you.

    Thank you.  I have tried that but it will only let me go to 129 X 129 inches, no larger.
    Sincerely,
    Bill Stern
    NSD IT Support
    22289 Exploration Drive
    Suite 305
    Lexington Park, MD 20653
    Phone: 301.862.4577 ext 10
    Fax: 301.862.9828
    Email: [email protected]

  • I want to know how to create a new script that can be run in batch proces in Photoshop Element 11 ?

    I want to know how to create a new script that can be run in batch proces in Photoshop Element 11 ?

    Have a look at the menu file/process multiple files. You can choose to add your signature (or the caption) to the image and export the new files.
    If that solution is not flexible enough, consider using the very affordable (12$)  Elements+ add-on which offers a 'meta stamp' script :
    http://elementsplus.net/v5/en/meta-stamp.htm
    Otherwise, have a look at other free and good solutions like Faststone Photoresizer, Xnview...

  • In iPhoto 11, I know how to create new libraries.  I do not know how to split my existing large library into the new ones.

    In iPhoto 11, I know how to create new libraries.  I do not know how to split my large existing library into the new libraries?

    You need to use the iPhoto Library Manager.
    (66928)

  • Please let me know how to create a iTunes ID without billing account because I don't have a bank account?

    Please let me know how to create a iTunes ID without billing account because I don't have a bank account?

    Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card

  • Is anyone know how to create dynamic pdf file from a JSP page or Servlet ?

    Hi
    Is any one know how to create a dynamic PDF file from JSP or servlet. I need to have standard form format needs to be created and want to send the info to that form dynamically.
    Is there any libraries available?
    Thanks

    I posted a link in this thread to a lib that lets you create PDFs from an app. They have a Java version. I have not used it but I know someone who used it with Microsoft ASP and they liked it.
    http://forum.java.sun.com/thread.jsp?forum=31&thread=287285
    -S-

Maybe you are looking for