Hi all small problem

hi all,
i want to make use of select statement to call the function,in that function we are performing some DML operations
but using functions we can not perform DML operations, i have gone though google i found something that
saq>variable g_num number
scott@ORA92> exec :g_num := ser_adm.populateServices (-1, 'A', 'B', 2, 'C', 'D', 3, SYSDATE)
http://www.oracle-base.com/forums/viewtopic.php?f=2&t=4782
i am obiee developer so, in obiee we can call the functions but not procedures
thing is we need to perform some DML operations from obiee answers so, how can i make it out
thanks
Sreedhar

Hi, Sreedhar,
791907 wrote:
hi all,
i want to make use of select statement to call the function,in that function we are performing some DML operations
but using functions we can not perform DML operations, i have gone though google i found something thatYou can perform DML inside a function. You might have read something that said such a function can't be used in a SQL statement, which is true, but in the example you posted:
saq>variable g_num number
scott@ORA92> exec :g_num := ser_adm.populateServices (-1, 'A', 'B', 2, 'C', 'D', 3, SYSDATE) you're not calling the function from a SQL statement, so it should work.
What are "saq>" and "scott@ORA92>"? Are they SQL*Plus prompts? Why do they change from one statement to the next? Is part of the problem that you have to re-connect as a different user?
http://www.oracle-base.com/forums/viewtopic.php?f=2&t=4782
i am obiee developer so, in obiee we can call the functions but not procedures
thing is we need to perform some DML operations from obiee answers so, how can i make it outSorry, I don't know anything about obiee.

Similar Messages

Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend

Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend

I just went through this and it appears that my Focusrite Saffire was the culprit. I connected all the outputs on the focusrite according to the way the jacsk on the back were labeled and then set up the multichannel speaker setup to match. Then I went into STP, created a pink noise clip and panned it around, the LFE, center and rears were not in the right place.
I reconnected the hardware to match the 5.1 pan pot in STP then changed the multichannel speaker setup to match. Everything appears to be correct now but I would have loved to have been able to just assigned the output busses to correct outputs in the saffire.
Next step is to pan that pink noise around with my SPL meter to calibrate the room.

Problem with installing free App (Everything is fine, bur we had a small problem getting your license)

Hello,
We have free App for SharePoint Online. Some our customers have problems with the installation. After install they see an issue with obtaining a license which should be free.
"Everything is fine, bur we had a small problem getting your license. Please go back to the SharePoint store to get this app again and you won't be charget for it."
See the screen:
How can we resolve the issue?
Thank you!
Our App: "Resource Reservation"
https://store.office.com/resource-reservation-WA104276770.aspx

Hi Gabe,
First, please check the suggestion above is helpful. I also suggest you removing all version of Office and re-install Office 2013.
We can try to run the application as an administrator and check if it works.
1. Right click the shortcut of the application or the main application.
2. Select properties.
3. Select compatibility tab and select "Run this program as an administrator."
If there is anything I can do for you about this issue, don't hesitate to tell me.
Best regards,
Greta Ge
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Many small problems in Mavericks

When user experience many small problem in daily work, I feel the design is failed.
Memory management has a lot of problem, I feel my macbook is abnormal slow after I upgraded to Mavericks. Sometime, I need to wait for several sec to get what I want.
I think this problem is extreme important for OS.
When I want to start a probelm, click once, no response, click twice, pop-up 2 times after 5 sec.
Then i change my way of work, clock one time, work on other task. 5 sec later, multi desktop switch the desktop to the starting program. Then, I don't know what I was doing.
Another is sound problem, sound doesn't work sometime and need some kind of procedure to get it back.
Please don't ask me do something to solve the problem everytime when it happen. It is OS task to work it properly.
Whatever how many great feature you added is meaningless if user daily experience is bad.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a couple of minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; Pc () { o=`grep -v '^ *#' "$2"`; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed '/^ *$/d; s/^ */ /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; o=`SP Hardware | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d; /[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]||0[^2]8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; for b in Thunderbolt USB; do o=`SP $b | sed -En '1d; /:$/{s/ *:$//;x;s/\n//p;}; /^ *V.* [0N].* /{s/ 0x.... //;s/[()]//g;s/$.*: $$.*$/ $\2$/;H;}; /Apple|SCSM/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); E=; for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* || continue; ls | while read f; do [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && e=" *" || e=; awk -F_ '!/ag$/{$NF=a[split($NF,a,".")]; print $0 "'"$e"'"}' <<< "$f"; done | tail`; Pm "${D[$i]} diagnostics"; done; [[ "$o" =~ \*$ ]] && printf $'\n* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|last value [1-9]|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process \"$s\" with UID ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process \"$s\" with UID ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | grep -v com\.apple\.CSConfig | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/Star*; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail/B,P*P,Qu*T,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; [[ "$ID" =~ ^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID ]] || printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`for e in DYLD_INSERT_LIBRARIES DYLD_LIBRARY_PATH; do launchctl getenv $e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter
exec bash
in the window and press return. You should then get a new line ending in a dollar sign.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know your password, or if you prefer not to enter it, just press return three times at the password prompt.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
8. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If it happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Small problem

I am very new to java, and having a small problem:
When i click on a button, i want the buttons name to be displayed
in a text field, saying "You have pressed" then the name of the button.
but i want to do this with multiple buttons and not just one button, so i want to be able to press any button and its name to be displayed in a text field.
your help will be appreciated

Sorry if i did not display code, thanks to all those who replied, heres some of the code, if i have gone wrong in any where could you please help me too correct, i think you will have a general idea of what i am trying to achieve:
import java.awt.*;
import java.awt.event.*;
import java.awt.Button;
import java.lang.Object;
public class Calculator extends Applet implements ActionListener
Button b1 + b2 + b3 + b4 + b5 + b6 + b7 + b8 + b9 + b10 + b11 + b12 + b13 + b14 + b15 + b16 + b17 + b18;
setLayout(new GridLayout(5,4));
public void init( );
Button b1 = new Button( "1" );
b1.addActionListener ( this );
add(b1);
Button b2 = new Button( "2" );
b2.addActionListener ( this );
add( b2 );
Button b3 = new Button( "3" );
b3.addActionListener ( this );
add( b3 );
Button b4 = new Button( "4" );
b4.addActionListener ( this );
add( b4 );
Button b5 = new Button( "5" );
b5.addActionListener ( this );
add( b5 );
Button b6 = new Button( "6" );
b6.addActionListener ( this );
add( b6 );
Button b7 = new Button( "7" );
b7.addActionListener ( this );
add( b7 );
Button b8 = new Button( "8" );
b8.addActionListener ( this );
add( b8 );
Button b9 = new Button( "9" );
b9.addActionListener ( this );
add( b9 );
Button b10 = new Button( "10" );
b10.addActionListener ( this );
add( b10 );
Button b11 = new Button( "+" );
b11.addActionListener ( this );
add( b11 );
Button b12 = new Button( "-" );
b12.addActionListener (this );
add( b12 );
Button b13 = new Button( "x" );
b13.addActionListener ( this );
add( b13 );
Button b14 = new Button( "/" );
b14.addActionListener (this );
add( b14 );
Button b15 = new Button( "MC" );
b15.addActionListener ( this );
add( b15 );
Button b16 = new Button( "MR" );
b16.addActionListener ( this );
add( b16 );
Button b17 = new Button( "M+" );
b17.addActionListener ( this );
add( b17 );
Button b18 = new Button( "c" );
b18.addActionListener ( this );
add( b18 );
after this i get stuck, i don't know how to create a small text field that syas you have pressed (then the button name) if this coding is wrong, can you please explain what i have done wrong!
Thanks

Small problem led to big problem

I had a few contacts that existed on my Centro which did not exist on my desktop. So I contacted the Palm Chat Support. The person who helped me had me perform several things which eventually led to my phone getting stuck in a loop. Things were not getting better so I asked to be transferred to a supervisor. The supervisor told me the only solution was a hard reset. I finally agreed to this. Now when I reinstall any applications (not third-party) such as calendar or address book, my phone won't come on. I can see the calendar or the address book but when I go to turn on the phone, it goes back into the endless loop. A soft reset will not take it out of the loop, only a hard reset. When I do a hard reset, I then have the ability to use the phone again but I have no data in my calendar, address book, etc. So essentially I have either a PDA or a Phone--but I can't have both. This started as a very small problem (a few missing contacts which I could have probably/should have probably just manually entered into the desktop). Now I have a very big problem, simply b/c of what I was directed to do by Support. Is there any hope?
Post relates to: Centro (AT&T)

There could be to issues going on here that you are having this result. One thing could be corrupted data such as your contacts or calendar, the other could be corrupted programs that are coming back from a hotsync.
The first I would like to troubleshoot as it is the easiest. To fix this what we need to do is hard reset your device. The instructions to do that is here http://kb.palm.com/wps/portal/kb/common/article/887_en.html this tells you how to do all types of resets. Also, what we need to do is rename your backup folder. What this folder is, it hold all your programs from the last time you synced your PC. On your computer go here
Palm Desktop 4.2 and below
My Computer--> C drive --> Program files --> Palm/PalmOne--> your hotsync username
Palm Desktop 6.2.2
My Documents/Documents --> Palm OS Desktop --> your hotsync username
Right click on your backup folder and rename it to "backupOld". Resync your device to the same user name and you will get all your contacts, calendar, tasks, and memos.
You can install the programs again but make sure they are compatible with the device. Also try one program again and wait 24 hours to see if the same thing happens again. This way you know what program is causing the issue.
If you have any questions about this or if this does not work please post back.

Recursive mergeSort... small problem with infinate recursion.

Basically, I have made a recursive mergeSort method, but there is a small problem...im getting stuck with an eternal recursion, which is obviously followed up swiftly by a stack flow error, problem is I cant see where im going wrong...
The error reads, "Exception in thread "main" java.lang.StackOverflowError at part3.mergeSort(part3.java:56)"
Heres the code... any help is highly appreciated, as I am new to java, and this is for university.
public class part3
    public static void main(String[] args)
      // Declare array of unsorted values.
      int[] values = {1,3,5,7,9,2,4,6,8,10};
      // Display unsorted values on screen.
      System.out.println("Unsorted Values");
      for(int i= 0;i < values.length; i++)
           System.out.println(values);
mergeSort(values, values.length);
output(values);
public static void mergeSort(int[] vals, int n)
// Declare necessary values
int lowCount, highCount;
int[] low, high;
int i, j, k;
if (n > 1)
          low = new int[n];
          high = new int[n];
          for(i=0,j=0,k=0; i < n; i++)
               if(vals[i] < low.length)
                    low[j] = vals[i];
                    j++;
               else
                    high[k] = vals[i];
                    k++;
          lowCount = j;
          highCount= k;
          mergeSort(low, lowCount);
          mergeSort(high, highCount);
          for(i = 0; i < lowCount; i++)
               vals[i] = low[i];
          for(i = 0; i < highCount; i++)
               vals[i+lowCount] = high[i];
public static void output(int[] data)
for(int i = 0; i < data.length; i++)
     System.out.print(data[i] + " ");
          System.out.println();

yes sorry, that was it, when i put that code in my class... i get an acception in thread main...
heres the code i now have...
I know i need to add a main method, but im completely unsure of what I need to put inside the main method, if you get what i mean...
sorry for all the hassle... :(
public class part3
     * Mergesort algorithm.
     * @param a an array of Comparable items.
    public static void mergeSort( Comparable [ ] a ) {
        Comparable [ ] tmpArray = new Comparable[ a.length ];
        mergeSort( a, tmpArray, 0, a.length - 1 );
     * Internal method that makes recursive calls.
     * @param a an array of Comparable items.
     * @param tmpArray an array to place the merged result.
     * @param left the left-most index of the subarray.
     * @param right the right-most index of the subarray.
    private static void mergeSort( Comparable [ ] a, Comparable [ ] tmpArray,
            int left, int right ) {
        if( left < right ) {
            int center = ( left + right ) / 2;
            mergeSort( a, tmpArray, left, center );
            mergeSort( a, tmpArray, center + 1, right );
            merge( a, tmpArray, left, center + 1, right );
     * Internal method that merges two sorted halves of a subarray.
     * @param a an array of Comparable items.
     * @param tmpArray an array to place the merged result.
     * @param leftPos the left-most index of the subarray.
     * @param rightPos the index of the start of the second half.
     * @param rightEnd the right-most index of the subarray.
    private static void merge( Comparable [ ] a, Comparable [ ] tmpArray,
            int leftPos, int rightPos, int rightEnd ) {
        int leftEnd = rightPos - 1;
        int tmpPos = leftPos;
        int numElements = rightEnd - leftPos + 1;
        // Main loop
        while( leftPos <= leftEnd && rightPos <= rightEnd )
            if( a[ leftPos ].compareTo( a[ rightPos ] ) <= 0 )
                tmpArray[ tmpPos++ ] = a[ leftPos++ ];
            else
                tmpArray[ tmpPos++ ] = a[ rightPos++ ];
        while( leftPos <= leftEnd )    // Copy rest of first half
            tmpArray[ tmpPos++ ] = a[ leftPos++ ];
        while( rightPos <= rightEnd ) // Copy rest of right half
            tmpArray[ tmpPos++ ] = a[ rightPos++ ];
        // Copy tmpArray back
        for( int i = 0; i < numElements; i++, rightEnd-- )
            a[ rightEnd ] = tmpArray[ rightEnd ];
}

Some small problems. Is this the OS or my device?

Hi all,
I have a MS Surface 2 RT since half a year and I've been experimenting small problems that I wanna know if you know a solution or you think is a device problem and I should contact the vendor.
Here are the problems:
- Almost every time I start the Email app, it closes inmediately and I have to start it again
- Most of the times, when I plug in a headsets, and then unplug it, the sound doesn't work from the speakers, and I have to re-start the device
- Most of the times, when I unplug the keyboard/cover, the on-screen keyboard doesn't appear, and I have to re-start the device, or plug in / unplug the keyboard/cover again
Do you think it's aproblem with the device? the OS? My WIndows 8.1 is up to date.
Many thanks.

Hi DanielHenry -
I'll try to deal with your issues as best I can. I'm a designer too using CS3 applications the same as yourself, so have come across similar issues.
Firstly, the display. There are many negative posts about the display on the 20inch iMac if you search these forums. The problem is that the display Apple have used has a much poorer viewing angle, hence the colour shifts you're seeing. I have a 24inch iMac at home and a 20inch iMac at work. The 24inch screen is far superior and great for graphics work. There really isn't anything you can do about the 20inch screen apart from plug in a second monitor or upgrade to a 24inch iMac.
Secondly, I think all of the rest of your problems may be down to the 1GB of RAM you have. If you're using CS3, Quark etc then you'll have speed issues with only 1GB RAM. And that includes your Finder slowing down too. If you can, I'd recommend you buy a 4GB RAM upgrade kit from someone like Crucial [here|http://www.crucial.com/uk/index.aspx?cpe=CHAWKuk]. They are cheap and very easy to install. Just unscrew one screw, pop out the old RAM, put in the new RAM and screw the one screw back in. Easy. The instructions are [here|http://support.apple.com/kb/HT1760].
I hope this helps.

Facing a small problem while executing WDA application from portal

Hi Experts,
I developed web dynpro for ABAP application and placed table UI control, which contains 270 records. Executing from SE80, it is working fine and showing clearly all records.
This application integrated in portal, while executing this applicaiton from portal, it is working fine and showing all records.
Here I facing a small problem i.e Pager ( footer area ) of table.
When the table is displayed there are the small box in the below of the table showing ROWS 244 of 270.
244 will be available in a small box. this 244 is not showing clearly, while executing from portal ( last digit 4 displying half part only). but 244 showing clearly while executing from SE80.
Kindly suggest how to resolve this problem.
Thanks & Regards
Sridhar

Hi Gopi Krishna,
Thanks for your time. From SE80, it is working fine and showing clearly row number. There is no property for increase width of small box, which contains current row number).
Facing problem while executing from portal.
Thanks & Regards
Sridhar

Some small problems with my new 3G iPhone

Having some small problems with my new iPhone, nothing major, just annoying.
1. When I plug my iPhone in to charge/sync my Adobe photoshop keeps trying to download the photos on my iPhone, which causes an error message from Adobe that it can't download and it stops all syncing and removes my iPhone from iTunes. I have to unplug and reinsert USB cable and sometimes it works ok and sometimes I have to reinsert again. Also when charging, it will disconnect, reconnect and the samething all over again, photoshop trying to get photos and an error message.
2. Can't send e-mails via 3G? Only can get, have to connected to a WiFi to send e-mails, or is this normal?

When your iPhone includes photos in the Camera Roll, it is also detected as a digital camera when connected to your computer, and whichever app you have selected to import photos will automatically launch to import the photos. If you haven't imported these photos, it is a good idea to do so as with any other digital camera. I import the photos followed by deleting the photos from the iPhone after the import process is complete. If I want any of the imported photos available on my iPhone for viewing, I add the photos to an existing album that is selected to be transferred to my iPhone under the Photos tab for my iPhone sync preferences, or add the photos to a new album followed by selecting the album under the Photos tab followed by a sync.
If your iPhone's Camera Roll does not include any photos that have not been imported, Adobe Photoshop should not launch automatically when your iPhone is connected.
I know how to disable the selected application for photo import from launching automatically regardless with a Mac, but not with Windows.
Regarding the sending email problem, who is the email account provider and does the email account provider have an authenticated SMTP server?
Most ISPs block the use of SMTP servers that are outside of their network or not provided by the ISP being used for your internet connection unless the SMTP server is authenticated. When connected to the internet via AT&T's cellular network, it is no different in this regard. AT&T's SMTP server is included and available by default for use with an email account that does not have an authenticated SMTP server when connected to the internet via AT&T's cellular network, but you probably won't be able to use this SMTP server for sending messages with the account when connected to the internet with your ISP via an available wi-fi network - especially if the email account is provided by your ISP.
I access two email accounts with the iPhone's mail client and both accounts have an authenticated SMTP server. I've never had any problems sending with either account regardless the ISP being used for an available wi-fi network, or when connected via AT&T's cellular network.

Is there an update forthcoming to 4.0 to fix all the problems? Since it's installation, my PC operation has slowed to a crawl and I'm experiencing numerous "unresponsive script" and "low virtual memory" messages.

My PC was running fine before 4.0, and since then it is as described above. Almost thought this was a virus masquerading as a legit update (has happened to me before). Will there be an update to fix all the problems that have been reported, or do I have to bring in the Geek Squad to replace Firefox with Explorer?

My PC was running fine before 4.0, and since then it is as described above. Almost thought this was a virus masquerading as a legit update (has happened to me before). Will there be an update to fix all the problems that have been reported, or do I have to bring in the Geek Squad to replace Firefox with Explorer?

I want to go back to the previous 2014.2 version. .3 is much too buggy and full of error messages. Creating problems as I am on a timeline with my client and I don't have time to fool around with all the problems.

2014 .3 is much too buggy and full of error messages. Creating problems as I am on a timeline with my client and I don't have time to fool around with all the problems.

You didn't mention what error(s) you've encountered? A workaround for the most commonly hit problem is here Re: error in Muse : Object UID:U6875 has two (or more) owners: U3633 and U3165
If you have a copy of your .muse file that has not been saved using 2014.3, you can downgrade by uninstalling Muse and then choose Previous Version in the Filters drop down in the Apps panel of the Creative Cloud desktop app. There will be a popup next to Muse where you can select a prior version to install.

I purchased photoshop elements and i am having all the problems in the world installing it.... first the link in the emails were errors and secondly i have downloaded and installed multiple times and it says my serial number from the email i received is i

I purchased photoshop elements and i am having all the problems in the world installing it.... first the link in the emails were errors and secondly i have downloaded and installed multiple times and it says my serial number from the email i received is incorrect.... please help

Ok, since this forum is for Photoshop Standard and Photoshop Extended, we don't know much about Photoshop Elements. There is a Photoshop Elements forum and I'll link it for you since they best know how to field your questions.
Photoshop Elements
Good luck on it!
Gene

Should I get an iMac with all the problems about?

So, as my birthday is coming up I decided to get an iMac, however on Wednesday I read on Gizmodo about the yellow screen debacle, so after doing some research on the matter I'm not sure what to get any more.
I decided (Before I read this on Giz) to get a 21.5" iMac.
So I have a few questions about it.
1: Does the 21.5" iMac's screen flicker and blackout like the 27", it's very hard to find info about it as it seems it only affects 27", but is that because it doesn't effect 21.5" or because not many people bought the 21.5" iMac
2: Just how bad is this 'yellowing', I've looked at various photos of it and can hardly see any problem, does anyone have a really bad screen with the bottom of the screen being strongly yellow tinted?
3: Should I just skip all these problems and get a Macbook?
Please help me decide!

You have done your research on the new iMacs so you already know the answers to your questions. It's difficult to come to a consensus though because some report problems and some report they have no problems. It's your birthday... in my honest opinion, go for it.
Post back when you have your machine as to your findings on your machine. That's the one that matters.
Sorry if I am sounding a little tired of this but many people have asked the same question and many have provided the same answers. If you are very conservative you might want to wait and see, but if you don't want to postpone your birthday, go ahead; your iMac may be fine and if not, Apple will make it right. Do buy AppleCare.

Itunes imports cd; but they are all small files, and incomplete. Itunes plays neither the cd nor the imported songs. Anyone else faced this issue?

itunes imports cd; but they are all small files, and incomplete. Itunes plays neither the cd nor the imported songs. Anyone else faced this issue?

i've had this happen when the cd is extremely dirty. usually only one or two tracks though, not a whole cd.

Hi all small problem

Similar Messages

Maybe you are looking for