Hi any advise on regarding bandwith for ISE nodes (DC & DR)
Hi any advise on regarding bandwith for ISE nodes (DC & DR)
Refer
Bandwidth Requirements for Distributed Deployments
http://www.cisco.com/c/dam/en/us/solutions/collateral/enterprise/design-zone-security/howto_50_ise_deployment_tg.pdf
Similar Messages
-
ISE 1.1.1 to ISE 1.2 upgrade path for ISE node
Hi,
Currently in ISE deployment , we have 2 ISE nodes with 1.1.1.268 version with latest patch,
ISE nodes hold following personas
Node1 : Admin, Monitoring , PSN
Node 2 : PSN
How will above deplyoment should be upgrade to 1.2 ?
In which order they should be upgraded ? Any supporting doc covering above deployment for ISE 1.2 upgrade .Kindly check the following links for references
http://www.cisco.com/en/US/docs/security/ise/1.2/release_notes/ise12_rn.pdf
http://www.cisco.com/en/US/docs/security/ise/1.2/upgrade_guide/b_ise_upgrade_guide_chapter_01.pdf
https://www.cisco.com/en/US/docs/security/ise/1.2/open_source_license/Cisco_Identity_Services_Engine_1.2_Open_Source_Documentation.pdf -
My iphone 4 does not make any sound except when i have call. Any sound notification for example whatsapp or email or playing song i could not hear a pip, but when blug the earphone i could hear all sound via earphone, any advise??
Check the Mute switch, which is on the left side of the phone above the volume buttons.
-
Hi, my iTunes Match has been stuck on "5490 of 5518 songs checked for the last two days." Have tried stopping and restarting it a few times but it always gets stuck in the same place. Any advise on where to go from here?
ttt
-
new to itunes. saved several songs to wishlist so that I could return later to purchase and It says error occured when I click on wishlist. I went back in a tried to save some of the same songs that i selected earlier and its says they are already saved but wont display them so that i can purchase. Any advise ?
new to itunes. saved several songs to wishlist so that I could return later to purchase and It says error occured when I click on wishlist. I went back in a tried to save some of the same songs that i selected earlier and its says they are already saved but wont display them so that i can purchase. Any advise ?
-
Cisco ise 1.2 install certificates for ise cluster question
hello all i have an ise cluster of 4 devices. 1 primary admin/secondary monitor, 1 secondary admin/primary admin and 2 policy nodes
i need to install public CA certs on them. can I generate 1 CSR on one of the nodes, that includes a SAN with the DNS names of all the nodes?
Therefore get only 1 cert from the CA, and export and import the same cert into all the other nodes?
or do i have to generate 1 CSR for each node and purchase 4 certs? Wild card certs is not an option. tHANKS,ISE allows you to install a certificate with multiple Subject Alternative Name (SAN) fields. A browser reaching the ISE using any of the listed SAN names will accept the certificate without any error as long as it trusts the CA that signed the certificate.
The CSR for such a certificate cannot be generated from the ISE GUI. http://www.cisco.com/c/en/us/support/docs/security/identity-services-engine-software/113675-ise-binds-multi-names-00.html
Cisco ISE checks for a matching subject name as follows:
1. Cisco ISE looks at the subject alternative name (SAN) extension of the certificate. If the SAN contains one or more DNS names, then one of the DNS names must match the FQDN of the Cisco ISE node. If a wildcard certificate is used, then the wildcard domain name must match the domain in the Cisco ISE node's FQDN.
2. If there are no DNS names in the SAN, or if the SAN is missing entirely, then the Common Name (CN) in the Subject field of the certificate or the wildcard domain in the Subject field of the certificate must match the FQDN of the node.
3. If no match is found, the certificate is rejected.
Regards,
Jatin Katyal
*Do rate helpful posts* -
Cisco Wireless Broadcast Domain Sizing for ISE depoloyments
Good Day Community,
While deploying Cisco ISE solutions we have come across some conflicting deployment models. We have a corporate wireless network segmented in to 3 broadcast domains(class C). Which might be on the small side how ever the CCDA and CCDP tracks suggest only using up to a /23 network segment. While this is starts to present a challenge with regards to the ISE Authz policies as the ISE AuthZ Profile can only place it into one vlan id. This can be worked around by disabling aaa override. How ever this is against the design guide of TrustSec and you lose a lot of functionality of the ISE to authorize devices for a BYOD a single SSID.
Surely this must have been faced by other people out there deploying Wireless ISE solutions with +1000 concurrent devices.
Any and all suggestions are welcome.You should be able to use "interface group" instead of a vlan when aaa-overriding using ISE.
In this way you can map multiple vlans to the same interface group. So when overriding, users could get any vlan/subnet IP belong to that interface group.
interface group concept illustrate in this post
http://mrncciew.com/2013/01/27/understanding-vlan-select-feature/
HTH
Rasika
**** Pls rate all useful responses **** -
Access Switch Recommendation for ISE
Dear Expert,
My client is thinking to role out the ISE in the network they have old switches 2950g which supports only authentication with ISE.
In order to utilize most of the feature if not all we are thinking to replace them with 2960g.
Any advice, expereinvce in this regards will be very helpful for the recommended model for the access layer.
ThanksYou can use any of the L2 switches for 802.1x authentication and if you want L3 features you should use the L3 switches for reference you can check the list of features and IOS form the following link
http://www.cisco.com/en/US/solutions/collateral/ns170/ns896/ns1051/product_bulletin_c25-712066.html
http://www.cisco.com/en/US/solutions/ns170/ns896/ns1051/trustsec_matrix.html
and hardware compliance from the list for all ISE versions
http://www.cisco.com/en/US/products/ps11640/products_device_support_tables_list.html -
Limiting network bandwith for SAP printing
We are usinge ERP 6.0 (Win / MSSQL). One of the issues we are facing is that SAP printing take too much network bandwith.
Our network bandwith between Datacenter and office is 1Mbps.
Is ther any way to limit the use of network bandwith for SAP printing. Let's say up to 30 % of bandwith is assigned to SAP printing.
Thanks.Hi,
I am not aware of such way to "assign" bandwidth. For this reason you need to do precise network capacity planning and start the printing only when you do not have a peak of other important activities.
Best regards.
Sylvia -
Can any one give me answer for these questions
Can any one give me answer for these questions. I got these questions from net plz post the answers you know
ABAP CERTIFICATION QUESTIONS
1. If a table does not have MANDT as part of the primary key, it is ____.
A: A structure
B: Invalid
C: Client-independent
D: Not mandatory
2. In regard to CALL, which of the following is NOT a valid statement?
A: CALL FUNCTION
B: CALL SCREEN
C: CALL TRANSACTION
D: CALL PROGRAM
3. Name the type of ABAP Dictionary table that has these characteristics:
Same number of fields as the database table
Same name as database table
Maps 1:1 to database table
A: Pooled
B: Cluster
C: Transparent
D: View
4. An event starts with an event keyword and ends with:
A: Program execution.
B: END-OF-EVENT.
C: Another event keyword.
D: END-EVENT.
5. What is the system field for the current date?
A: SY-DATUM
B: SY-DATE
C: SY-DATID
D: SY-SDATE
6. The following code indicates:
SELECT fld1 fld2 FROM tab1 APPENDING TABLE itab
WHERE fld1 IN sfld1.
A: Add rows to the existing rows of itab.
B: Add rows to itab after first deleting any existing rows of itab.
C: Select rows from tab1 for matching itab entries.
D: Nothing, this is a syntax error.
7. You may change the following data object as shown below so that it equals 3.14.
CONSTANTS: PI type P decimals 2 value '3.1'.
PI = '3.14'.
A: True
B: False
8. The SAP service that ensures data integrity by handling locking is called:
A: Update
B: Dialog
C: Enqueue/Dequeue
D: Spool
9. Which of these sentences most accurately describes the GET VBAK LATE. event?
A: This event is processed before the second time the GET VBAK event is processed.
B: This event is processed after all occurrences of the GET VBAK event are completed.
C: This event will only be processed after the user has selected a basic list row.
D: This event is only processed if no records are selected from table VBAK.
10. Which of the following is not a true statement in regard to a hashed internal table type?
A: Its key must always be UNIQUE.
B: May only be accessed by its key.
C: Response time for accessing a row depends on the number of entries in the table.
D: Declared using internal table type HASHED TABLE.
11. TO include database-specific SQL statements within an ABAP program, code them between:
A: NATIVE SQL_ENDNATIVE.
B: DB SQL_ENDDB.
C: SELECT_ENDSELECT.
D: EXEC SQL_ENDEXEC.
12. To measure how long a block of code runs, use the ABAP statement:
A: GET TIME .
B: SET TIME FIELD .
C: GET RUN TIME FIELD .
D: SET CURSOR FIELD .
13. When a secondary list is being processed, the data of the basic list is available by default.
A: True
B: False
14. Given:
DATA: BEGIN OF itab OCCURS 10,
qty type I,
END OF itab.
DO 25 TIMES. itab-qty = sy-index. APPEND itab. ENDDO.
LOOP AT itab WHERE qty > 10.
WRITE: /1 itab-qty.
ENDLOOP.
This will result in:
A: Output of only those itab rows with a qty field less than 10
B: Output of the first 10 itab rows with a qty field greater than 10
C: A syntax error
D: None of the above
15. After a DESCRIBE TABLE statement SY-TFILL will contain
A: The number of rows in the internal table.
B: The current OCCURS value.
C: Zero, if the table contains one or more rows.
D: The length of the internal table row structure.
16. You may declare your own internal table type using the TYPES keyword.
A: True
B: False
17. After adding rows to an internal table with COLLECT, you should avoid adding more rows with APPEND.
A: True
B: False
18. Which of the following is not a component of control break processing when looping at an internal table?
A: AT START OF
B: AT FIRST
C: AT LAST
D: AT NEW
19. A dictionary table is made available for use within an ABAP program via the TABLES statement.
A: True
B: False
20. Which of the following would be best for hiding further selection criteria until a function is chosen?
A: AT NEW SELECTION-SCREEN
B: SELECTION-SCREEN AT LINE-SELECTION
C: SUBMIT SELECTION-SCREEN
D: CALL SELECTION-SCREEN
21. What must you code in the flow logic to prevent a module from being called unless a field contains a non-initial value (as determined by its data type)?
A: ON INPUT
B: CHAIN
C: FIELD
D: ON REQUEST
22. The AT USER-COMMAND event is triggered by functions defined in the ____.
A: screen painter
B: ABAP report
C: menu painter status
D: ABAP Dictionary
23. In regard to a function group, which of the following is NOT a true statement?
A: Combines similar function modules.
B: Shares global data with all its function modules.
C: Exists within the ABAP workbench as an include program.
D: Shares subroutines with all its function modules.
24. In regard to SET PF-STATUS, you can deactivate unwanted function codes by using ____.
A: EXCLUDING
B: IMMEDIATELY
C: WITHOUT
D: HIDE
25. In regard to data transported in PAI when the FIELD statement is used, which of the following is NOT a true statement?
A: Fields in PBO are transported directly from PAI.
B: Fields with identical names are transported to the ABAP side.
C: Fields not defined in FIELD statements are transported first.
D: Fields that are defined in FIELD statements are transported when their corresponding module is called.
26. The order in which an event appears in the ABAP code determines when the event is processed.
A: True
B: False
27. A field declared as type T has the following internal representation:
A: SSMMHH
B: HHMMSS
C: MMHHSS
D: HHSSMM
28. Which of the following is NOT a component of the default standard ABAP report header?
A: Date and Time
B: List title
C: Page number
D: Underline
29. Assuming a pushbutton with function code 'FUNC' is available in the toolbar of a list report, what event is processed when the button is clicked?
A: AT USER-COMMAND.
B: AT PFn.
C: AT SELECTION-SCREEN.
D: END-OF-SELECTION.
30. In regard to field selection, what option of the SELECT statement is required?
A: FOR ALL ENTRIES
B: WHERE
C: INTO
D: MOVE-CORRESPONDING
31. The following program outputs what?
report zjgtest1
write: /1 'Ready_'.
PARAMETER: test.
INITIALIZATION.
write: /1 'Set_'.
START-OF-SELECTION.
write: /1 'GO!!'.
A: Set_ GO!! (each on its own line)
B: Set_ Ready_ GO!! (all on their own lines)
C: Ready_ GO!! (each on its own line)
D: Ready_ Set_ GO!! (all on their own lines)
32. To declare a selection criterion that does not appear on the selection screen, use:
A: NO-DISPLAY
B: INVISIBLE
C: MODIF ID
D: OBLIGATORY
33. An internal table that is nested within another internal table should not contain a header line.
A: True
B: False
34. What is output by the following code?
DATA: BEGIN OF itab OCCURS 0, letter type c, END OF itab.
itab-letter = 'A'. APPEND itab. itab-letter = 'B'. APPEND itab.
itab-letter = 'C'. APPEND itab. itab-letter = 'D'. APPEND itab.
LOOP AT itab.
SY-TABIX = 2.
WRITE itab-letter.
EXIT.
ENDLOOP.
A: A
B: A B C D
C: B
D: B C D
35. To select all database entries for a certain WHERE clause into an internal table in one step, use
A: SELECT_INTO TABLE itab_
B: SELECT_INTO itab_
C: SELECT_APPENDING itab
D: SELECT_itab_
36. After a successful SELECT statement, what does SY-SUBRC equal?
A: 0
B: 4
C: 8
D: Null
37. This selection screen syntax forces the user to input a value:
A: REQUIRED-ENTRY
B: OBLIGATORY
C: DEFAULT
D: SELECTION-SCREEN EXCLUDE
38. If the following code results in a syntax error, the remedy is:
DATA: itab TYPE SORTED TABLE OF rec_type WITH UNIQUE KEY field1
WITH HEADER LINE.
itab-field1 = 'Company'. itab-field2 = '1234'. INSERT TABLE itab.
itab-field1 = 'Bank'. itab-field2 = 'ABC'. INSERT TABLE itab.
SORT itab.
LOOP AT itab.
write: /1 itab-field1, itab-field2.
ENDLOOP.
A: There is no syntax error here
B: Remove the SORT statement
C: Change INSERT to APPEND
D: Add a WHERE clause to the loop
39. If this code results in an error, the remedy is:
SELECT fld1 fld2 FROM tab1 WHERE fld3 = pfld3.
WRITE: /1 tab1-fld1, tab1-fld2.
ENDSELECT.
A: Add a SY-SUBRC check.
B: Change the WHERE clause to use fld1 or fld2.
C: Remove the /1 from the WRITE statement.
D: Add INTO (tab1-fld1, tab1-fld2).
40. When modifying an internal table within LOOP AT itab. _ ENDLOOP. you must include an index number.
A: True
B: False
41. To allow the user to enter values on the screen for a list field, use:
A: OPEN LINE.
B: SET CURSOR FIELD.
C: WRITE fld AS INPUT FIELD.
D: FORMAT INPUT ON.
42. Before a function module may be tested, it must first be:
A: Linked
B: Authorized
C: Released
D: Active
43. To include a field on your screen that is not in the ABAP Dictionary, which include program should contain the data declaration for the field?
A: PBO module include program
B: TOP include program
C: PAI module include program
D: Subroutine include program
44. If a table contains many duplicate values for a field, minimize the number of records returned by using this SELECT statement addition.
A: MIN
B: ORDER BY
C: DISTINCT
D: DELETE
45. The system internal table used for dynamic screen modification is named:
A: ITAB
B: SCREEN
C: MODTAB
D: SMOD
46. Within the source code of a function module, errors are handled via the keyword:
A: EXCEPTION
B: RAISE
C: STOP
D: ABEND
47. Which system field contains the contents of a selected line?
A: SY-CUCOL
B: SY-LILLI
C: SY-CUROW
D: SY-LISEL
48. The following statement writes what type of data object?
WRITE: /1 'Total Amount:'.
A: Text literal
B: Text variable
C: In-code comment
D: Text integer
49. For the code below, second_field is of what data type?
DATA: first_field type P, second_field like first_field.
A: P
B: C
C: N
D: D
50. Which of the following describes the internal representation of a type D data object?
A: DDMMYYYY
B: YYYYDDMM
C: MMDDYYYY
D: YYYYMMDD
51. A BDC program is used for all of the following except:
A: Downloading data to a local file
B: Data interfaces between SAP and external systems
C: Initial data transfer
D: Entering a large amount of data
52. In regard to PERFORM, which of the following is NOT a true statement?
A: May be used within a subroutine.
B: Requires actual parameters.
C: Recursive calls are allowed in ABAP.
D: Can call a subroutine in another program.
53. What is the transaction code for the ABAP Editor?
A: SE11
B: SE38
C: SE36
D: SE16
54. In regard to HIDE, which of the following is NOT a true statement?
A: Saves the contents of variables in relation to a list line's row number.
B: The hidden variables must be output on a list line.
C: The HIDE area is retrieved when using the READ LINE statement.
D: The HIDE area is retrieved when an interactive event is triggered.
55. Database locks are sufficient in a multi-user environment.
A: True
B: False
56. The complete technical definition of a table field is determined by the field's:
A: Domain
B: Field name
C: Data type
D: Data element
57. In regard to LEAVE, which of the following is NOT a true statement?
A: May be used to return immediately to a calling program.
B: May be used to stop the current loop pass and get the next.
C: May be used to start a new transaction.
D: May be used to go to the next screen.
58. The following code indicates:
SELECT fld6 fld3 fld2 fld1 FROM tab1 INTO CORRESPONDING FIELDS OF TABLE itab
WHERE fld3 = pfld3.
A: The order of the fields in itab does not matter.
B: Fill the header line of itab, but not the body.
C: Table itab can only contain fields also in table tab1.
D: None of the above.
59. The ABAP statement below indicates that the program should continue with the next line of code if the internal table itab:
CHECK NOT itab[] IS INITIAL.
A: Contains no rows
B: Contains at least one row
C: Has a header line
D: Has an empty header line
60. What will be output by the following code?
DATA: BEGIN OF itab OCCURS 0, fval type i, END OF itab.
itab-fval = 1. APPEND itab.
itab-fval = 2. APPEND itab.
FREE itab.
WRITE: /1 itab-fval.
A: 2
B: 0
C: blank
D: 1
61. To allow the user to enter a range of values on a selection screen, use the ABAP keyword:
A: DATA.
B: RANGES.
C: PARAMETERS.
D: SELECT-OPTIONS.
62. If an internal table is declared without a header line, what else must you declare to work with the table's rows?
A: Another internal table with a header line.
B: A work area with the same structure as the internal table.
C: An internal table type using the TYPES statement.
D: A PARAMETER.
63. Assuming an internal table contains 2000 entries, how many entries will it have after the following line of code is executed?
DELETE itab FROM 1500 TO 1700.
A: This is a syntax error.
B: 1801
C: 1800
D: 1799
64. To remove lines from a database table, use ____.
A: UPDATE
B: MODIFY
C: ERASE
D: DELETE
65. All of the following may be performed using SET CURSOR except:
A: Move the cursor to a specific field on a list.
B: Move the cursor to a specific list line.
C: Move the cursor to a specific pushbutton, activating that function.
D: Move the cursor to a specific row and column on a list.
66. When is it optional to pass an actual parameter to a required formal parameter of a function module?
A: The actual parameter is type C.
B: The formal parameter contains a default value.
C: The formal parameter's \"Reference\" attribute is turned on.
D: It is never optional.
67. Coding two INITIALIZATION events will cause a syntax error.
A: True
B: False
68. Adding a COMMIT WORK statement between SELECT_ENDSELECT is a good method for improving performance.
A: True
B: False
69. To save information on a list line for use after the line is selected, use this keyword.
A: APPEND
B: EXPORT
C: WRITE
D: HIDE
70. To bypass automatic field input checks, include this in PAI.
A: AT EXIT-COMMAND
B: ON INPUT
C: ON REQUEST
D: LEAVE TO SCREEN 0.
71. Within a function module's source code, if the MESSAGE_RAISING statement is executed, all of the following system fields are filled automatically except:
A: SY-MSGTY
B: SY-MSGNO
C: SY-MSGV1
D: SY-MSGWA
72. The following code indicates:
REPORT ZLISTTST.
START-OF-SELECTION.
WRITE: text-001.
FORMAT HOTSPOT ON.
WRITE: text-002.
FORMAT HOTSPOT OFF.
AT LINE-SELECTION.
WRITE / text-003.
A: Text-002 may not be selected.
B: The value of text-002 is stored in a special memory area.
C: Text-002 may be clicked once to trigger the output of text-003.
D: None of the above.
73. The ____ type of ABAP Dictionary view consists of one or more transparent tables and may be accessed by an ABAP program using Open SQL.
A: Database view
B: Projection view
C: Help view
D: Entity view
74. A concrete field is associated with a field-symbol via ABAP keyword
A: MOVE
B: WRITE
C: ASSIGN
D: VALUE
75. The output for the following code will be:
report zabaprg.
DATA: char_field type C.
char_field = 'ABAP data'.
WRITE char_field.
A: ABAP data
B: A
C: Nothing, there is a syntax error
D: None of the above
76. Page footers are coded in the event:
A: TOP-OF-PAGE.
B: END-OF-SELECTION.
C: NEW-PAGE.
D: END-OF-PAGE.
77. The event AT SELECTION-SCREEN OUTPUT. occurs before the selection screen is displayed and is the best event for assigning default values to selection criteria.
A: True
B: False
78. The TABLES statement declares a data object.
A: True
B: False
79. Assuming tab1-fld7 is not a key field, how can you prevent reading all the table rows?
SELECT fld1 fld2 fld3 FROM tab1 INTO (fld4, fld5, fld6)
WHERE fld7 = pfld7.
WRITE: /1 fld4, fld5, fld6.
ENDSELECT.
A: Take fld7 out of the WHERE clause.
B: Create an index in the ABAP Dictionary for tab1-fld7.
C: Use INTO TABLE instead of just INTO.
D: Take the WRITE statement out of the SELECT_ENDSELECT.
80. Which of the following is NOT a required attribute when creating an ABAP program?
A: Application
B: Title
C: Status
D: Type
81. When creating a transparent table in the ABAP Dictionary, which step automatically creates the table in the underlying database?
A: Adding technical settings to the table
B: Checking the table syntax
C: Saving the table
D: Activating the table
82. Within the ABAP program attributes, Type = 1 represents:
A: INCLUDE program
B: Online program
C: Module pool
D: Function group
E: Subroutine pool
83. If this code results in an error, the remedy is:
SELECT fld1 SUM( fld1 ) FROM tab1 INTO_
A: Remove the spaces from SUM( fld1 ).
B: Move SUM( fld1 ) before fld1.
C: Add GROUP BY f1.
D: Change to SUM( DISTINCT f1 ).
84. Which keyword adds rows to an internal table while accumulating numeric values?
A: INSERT
B: APPEND
C: COLLECT
D: GROUP
85. Assuming itab has a header line, what will be output by the following code?
READ TABLE itab INDEX 3 TRANSPORTING field1.
WRITE: /1 itab-field1, itab-field2.
A: The contents of the third row's itab-field1.
B: The contents of the third row's itab-field1 and itab-field2.
C: The contents of the third row's itab-field2.
D: Nothing.
86. The following code indicates:
SELECTION-SCREEN BEGIN OF BLOCK B1.
PARAMETERS: myparam(10) type C,
Myparam2(10) type N,
SELECTION-SCREEN END OF BLOCK.
A: Draw a box around myparam and myparam2 on the selection screen.
B: Allow myparam and myparam2 to be ready for input during an error dialog.
C: Do not display myparam and myparam2 on the selection screen.
D: Display myparam and myparam2 only if both fields have default values.
87. Which statement will sort the data of an internal table with fields FRUIT, QTY, and PRICE so that it appears as follows?
FRUIT QTY PRICE
Apples 12 22.50
Apples 9 18.25
Oranges 15 17.35
Bananas 20 10.20
Bananas 15 6.89
Bananas 5 2.75
A: SORT itab DESCENDING BY QTY PRICE.
B: SORT itab BY PRICE FRUIT.
C: SORT itab.
D: SORT itab BY PRICE DESCENDING.
88. Which keyword adds a line anywhere within an internal table?
A: APPEND
B: MODIFY
C: ADD
D: INSERT
89. To read a single line of an internal table, use the following:
A: LOOP AT itab. _ ENDLOOP.
B: READ itab.
C: SELECT SINGLE * FROM itab.
D: READ TABLE itab.
90. Which Open SQL statement should not be used with cluster databases?
A: UPDATE
B: MODIFY
C: DELETE
D: INSERT
91. To include a field on your screen that is not in the ABAP Dictionary, which include program should contain the data declaration for the field?
A: PBO module include program
B: TOP include program
C: PAI module include program
D: Subroutine include program
92. This flow logic statement is used to make multiple fields open for input after an error or warning message.
A: GROUP
B: FIELD-GROUP
C: CHAIN
D: LOOP AT SCREEN
93. Given:
PERFORM subroutine USING var.
The var field is known as what type of parameter?
A: Formal
B: Actual
C: Static
D: ValueANSWERS :
1. If a table does not have MANDT as part of the primary key, it is ____.
A: A structure
B: Invalid
C: Client-independent
D: Not mandatory
Ans : C
2. In regard to CALL, which of the following is NOT a valid statement?
A: CALL FUNCTION
B: CALL SCREEN
C: CALL TRANSACTION
D: CALL PROGRAM
Ans : D
3. Name the type of ABAP Dictionary table that has these characteristics:
Same number of fields as the database table
Same name as database table
Maps 1:1 to database table
A: Pooled
B: Cluster
C: Transparent
D: View
Ans : C
4. An event starts with an event keyword and ends with:
A: Program execution.
B: END-OF-EVENT.
C: Another event keyword.
D: END-EVENT.
Ans: C
5. What is the system field for the current date?
A: SY-DATUM
B: SY-DATE
C: SY-DATID
D: SY-SDATE
Ans : A
6. The following code indicates:
SELECT fld1 fld2 FROM tab1 APPENDING TABLE itab
WHERE fld1 IN sfld1.
A: Add rows to the existing rows of itab.
B: Add rows to itab after first deleting any existing rows of itab.
C: Select rows from tab1 for matching itab entries.
D: Nothing, this is a syntax error.
Ans : B
7. You may change the following data object as shown below so that it equals 3.14.
CONSTANTS: PI type P decimals 2 value '3.1'.
PI = '3.14'.
A: True
B: False
Ans : B
8. The SAP service that ensures data integrity by handling locking is called:
A: Update
B: Dialog
C: Enqueue/Dequeue
D: Spool
Ans : C
9. Which of these sentences most accurately describes the GET VBAK LATE. event?
A: This event is processed before the second time the GET VBAK event is processed.
B: This event is processed after all occurrences of the GET VBAK event are completed.
C: This event will only be processed after the user has selected a basic list row.
D: This event is only processed if no records are selected from table VBAK.
Ans :
10. Which of the following is not a true statement in regard to a hashed internal table type?
A: Its key must always be UNIQUE.
B: May only be accessed by its key.
C: Response time for accessing a row depends on the number of entries in the table.
D: Declared using internal table type HASHED TABLE.
Ans : C
11. TO include database-specific SQL statements within an ABAP program, code them between:
A: NATIVE SQL_ENDNATIVE.
B: DB SQL_ENDDB.
C: SELECT_ENDSELECT.
D: EXEC SQL_ENDEXEC.
Ans : D
12. To measure how long a block of code runs, use the ABAP statement:
A: GET TIME .
B: SET TIME FIELD .
C: GET RUN TIME FIELD .
D: SET CURSOR FIELD .
Ans : C
13. When a secondary list is being processed, the data of the basic list is available by default.
A: True
B: False
Ans : B
14. Given:
DATA: BEGIN OF itab OCCURS 10,
qty type I,
END OF itab.
DO 25 TIMES. itab-qty = sy-index. APPEND itab. ENDDO.
LOOP AT itab WHERE qty > 10.
WRITE: /1 itab-qty.
ENDLOOP.
This will result in:
A: Output of only those itab rows with a qty field less than 10
B: Output of the first 10 itab rows with a qty field greater than 10
C: A syntax error
D: None of the above
Ans : B
15. After a DESCRIBE TABLE statement SY-TFILL will contain
A: The number of rows in the internal table.
B: The current OCCURS value.
C: Zero, if the table contains one or more rows.
D: The length of the internal table row structure.
Ans ; A
16. You may declare your own internal table type using the TYPES keyword.
A: True
B: False
Ans : A
17. After adding rows to an internal table with COLLECT, you should avoid adding more rows with APPEND.
A: True
B: False
Ans : A
18. Which of the following is not a component of control break processing when looping at an internal table?
A: AT START OF
B: AT FIRST
C: AT LAST
D: AT NEW
Ans : A
19. A dictionary table is made available for use within an ABAP program via the TABLES statement.
A: True
B: False
Ans : A
20. Which of the following would be best for hiding further selection criteria until a function is chosen?
A: AT NEW SELECTION-SCREEN
B: SELECTION-SCREEN AT LINE-SELECTION
C: SUBMIT SELECTION-SCREEN
D: CALL SELECTION-SCREEN
Ans : D
21. What must you code in the flow logic to prevent a module from being called unless a field contains a non-initial value (as determined by its data type)?
A: ON INPUT
B: CHAIN
C: FIELD
D: ON REQUEST
Ans : A
22. The AT USER-COMMAND event is triggered by functions defined in the ____.
A: screen painter
B: ABAP report
C: menu painter status
D: ABAP Dictionary
Ans : C
23. In regard to a function group, which of the following is NOT a true statement?
A: Combines similar function modules.
B: Shares global data with all its function modules.
C: Exists within the ABAP workbench as an include program.
D: Shares subroutines with all its function modules.
Ans ; C
24. In regard to SET PF-STATUS, you can deactivate unwanted function codes by using ____.
A: EXCLUDING
B: IMMEDIATELY
C: WITHOUT
D: HIDE
Ans : A
25. In regard to data transported in PAI when the FIELD statement is used, which of the following is NOT a true statement?
A: Fields in PBO are transported directly from PAI.
B: Fields with identical names are transported to the ABAP side.
C: Fields not defined in FIELD statements are transported first.
D: Fields that are defined in FIELD statements are transported when their corresponding module is called.
Ans ; C
26. The order in which an event appears in the ABAP code determines when the event is processed.
A: True
B: False
Ans : B
27. A field declared as type T has the following internal representation:
A: SSMMHH
B: HHMMSS
C: MMHHSS
D: HHSSMM
Ans : B
28. Which of the following is NOT a component of the default standard ABAP report header?
A: Date and Time
B: List title
C: Page number
D: Underline
Ans ; A
29. Assuming a pushbutton with function code 'FUNC' is available in the toolbar of a list report, what event is processed when the button is clicked?
A: AT USER-COMMAND.
B: AT PFn.
C: AT SELECTION-SCREEN.
D: END-OF-SELECTION.
Ans : A
30. In regard to field selection, what option of the SELECT statement is required?
A: FOR ALL ENTRIES
B: WHERE
C: INTO
D: MOVE-CORRESPONDING
Ans : B
31. The following program outputs what?
report zjgtest1
write: /1 'Ready_'.
PARAMETER: test.
INITIALIZATION.
write: /1 'Set_'.
START-OF-SELECTION.
write: /1 'GO!!'.
A: Set_ GO!! (each on its own line)
B: Set_ Ready_ GO!! (all on their own lines)
C: Ready_ GO!! (each on its own line)
D: Ready_ Set_ GO!! (all on their own lines)
Ans : C
32. To declare a selection criterion that does not appear on the selection screen, use:
A: NO-DISPLAY
B: INVISIBLE
C: MODIF ID
D: OBLIGATORY
Ans : A
33. An internal table that is nested within another internal table should not contain a header line.
A: True
B: False
Ans : B
34. What is output by the following code?
DATA: BEGIN OF itab OCCURS 0, letter type c, END OF itab.
itab-letter = 'A'. APPEND itab. itab-letter = 'B'. APPEND itab.
itab-letter = 'C'. APPEND itab. itab-letter = 'D'. APPEND itab.
LOOP AT itab.
SY-TABIX = 2.
WRITE itab-letter.
EXIT.
ENDLOOP.
A: A
B: A B C D
C: B
D: B C D
Ans : A
35. To select all database entries for a certain WHERE clause into an internal table in one step, use
A: SELECT_INTO TABLE itab_
B: SELECT_INTO itab_
C: SELECT_APPENDING itab
D: SELECT_itab_
36. After a successful SELECT statement, what does SY-SUBRC equal?
A: 0
B: 4
C: 8
D: Null
Ans : A
37. This selection screen syntax forces the user to input a value:
A: REQUIRED-ENTRY
B: OBLIGATORY
C: DEFAULT
D: SELECTION-SCREEN EXCLUDE
Ans : B
38. If the following code results in a syntax error, the remedy is:
DATA: itab TYPE SORTED TABLE OF rec_type WITH UNIQUE KEY field1
WITH HEADER LINE.
itab-field1 = 'Company'. itab-field2 = '1234'. INSERT TABLE itab.
itab-field1 = 'Bank'. itab-field2 = 'ABC'. INSERT TABLE itab.
SORT itab.
LOOP AT itab.
write: /1 itab-field1, itab-field2.
ENDLOOP.
A: There is no syntax error here
B: Remove the SORT statement
C: Change INSERT to APPEND
D: Add a WHERE clause to the loop
Ans :
39. If this code results in an error, the remedy is:
SELECT fld1 fld2 FROM tab1 WHERE fld3 = pfld3.
WRITE: /1 tab1-fld1, tab1-fld2.
ENDSELECT.
A: Add a SY-SUBRC check.
B: Change the WHERE clause to use fld1 or fld2.
C: Remove the /1 from the WRITE statement.
D: Add INTO (tab1-fld1, tab1-fld2).
Ans : D
40. When modifying an internal table within LOOP AT itab. _ ENDLOOP. you must include an index number.
A: True
B: False
Ans : A
41. To allow the user to enter values on the screen for a list field, use:
A: OPEN LINE.
B: SET CURSOR FIELD.
C: WRITE fld AS INPUT FIELD.
D: FORMAT INPUT ON.
Ans : C
42. Before a function module may be tested, it must first be:
A: Linked
B: Authorized
C: Released
D: Active
Ans : D
43. To include a field on your screen that is not in the ABAP Dictionary, which include program should contain the data declaration for the field?
A: PBO module include program
B: TOP include program
C: PAI module include program
D: Subroutine include program
Ans : B
44. If a table contains many duplicate values for a field, minimize the number of records returned by using this SELECT statement addition.
A: MIN
B: ORDER BY
C: DISTINCT
D: DELETE
Ans : C
45. The system internal table used for dynamic screen modification is named:
A: ITAB
B: SCREEN
C: MODTAB
D: SMOD
Ans : B
46. Within the source code of a function module, errors are handled via the keyword:
A: EXCEPTION
B: RAISE
C: STOP
D: ABEND
Ans : A
47. Which system field contains the contents of a selected line?
A: SY-CUCOL
B: SY-LILLI
C: SY-CUROW
D: SY-LISEL
Ans : D
48. The following statement writes what type of data object?
WRITE: /1 'Total Amount:'.
A: Text literal
B: Text variable
C: In-code comment
D: Text integer
Ans : A
49. For the code below, second_field is of what data type?
DATA: first_field type P, second_field like first_field.
A: P
B: C
C: N
D: D
Ans : A
50. Which of the following describes the internal representation of a type D data object?
A: DDMMYYYY
B: YYYYDDMM
C: MMDDYYYY
D: YYYYMMDD
Ans : A
51. A BDC program is used for all of the following except:
A: Downloading data to a local file
B: Data interfaces between SAP and external systems
C: Initial data transfer
D: Entering a large amount of data
Ans : A
52. In regard to PERFORM, which of the following is NOT a true statement?
A: May be used within a subroutine.
B: Requires actual parameters.
C: Recursive calls are allowed in ABAP.
D: Can call a subroutine in another program.
Ans : B
53. What is the transaction code for the ABAP Editor?
A: SE11
B: SE38
C: SE36
D: SE16
Ans : B
54. In regard to HIDE, which of the following is NOT a true statement?
A: Saves the contents of variables in relation to a list line's row number.
B: The hidden variables must be output on a list line.
C: The HIDE area is retrieved when using the READ LINE statement.
D: The HIDE area is retrieved when an interactive event is triggered.
Ans : B
55. Database locks are sufficient in a multi-user environment.
A: True
B: False
Ans : B
56. The complete technical definition of a table field is determined by the field's:
A: Domain
B: Field name
C: Data type
D: Data element
Ans : A
57. In regard to LEAVE, which of the following is NOT a true statement?
A: May be used to return immediately to a calling program.
B: May be used to stop the current loop pass and get the next.
C: May be used to start a new transaction.
D: May be used to go to the next screen.
Ans : B
58. The following code indicates:
SELECT fld6 fld3 fld2 fld1 FROM tab1 INTO CORRESPONDING FIELDS OF TABLE itab
WHERE fld3 = pfld3.
A: The order of the fields in itab does not matter.
B: Fill the header line of itab, but not the body.
C: Table itab can only contain fields also in table tab1.
D: None of the above.
Ans : C
59. The ABAP statement below indicates that the program should continue with the next line of code if the internal table itab:
CHECK NOT itab[] IS INITIAL.
A: Contains no rows
B: Contains at least one row
C: Has a header line
D: Has an empty header line
Ans : B
60. What will be output by the following code?
DATA: BEGIN OF itab OCCURS 0, fval type i, END OF itab.
itab-fval = 1. APPEND itab.
itab-fval = 2. APPEND itab.
FREE itab.
WRITE: /1 itab-fval.
A: 2
B: 0
C: blank
D: 1
Ans : A
61. To allow the user to enter a range of values on a selection screen, use the ABAP keyword:
A: DATA.
B: RANGES.
C: PARAMETERS.
D: SELECT-OPTIONS.
Ans : D
62. If an internal table is declared without a header line, what else must you declare to work with the table's rows?
A: Another internal table with a header line.
B: A work area with the same structure as the internal table.
C: An internal table type using the TYPES statement.
D: A PARAMETER.
Ans : B
63. Assuming an internal table contains 2000 entries, how many entries will it have after the following line of code is executed?
DELETE itab FROM 1500 TO 1700.
A: This is a syntax error.
B: 1801
C: 1800
D: 1799
Ans : A
64. To remove lines from a database table, use ____.
A: UPDATE
B: MODIFY
C: ERASE
D: DELETE
Ans : D
65. All of the following may be performed using SET CURSOR except:
A: Move the cursor to a specific field on a list.
B: Move the cursor to a specific list line.
C: Move the cursor to a specific pushbutton, activating that function.
D: Move the cursor to a specific row and column on a list.
Ans : C
66. When is it optional to pass an actual parameter to a required formal parameter of a function module?
A: The actual parameter is type C.
B: The formal parameter contains a default value.
C: The formal parameter's \"Reference\" attribute is turned on.
D: It is never optional.
Ans : B
67. Coding two INITIALIZATION events will cause a syntax error.
A: True
B: False
Ans : B
68. Adding a COMMIT WORK statement between SELECT_ENDSELECT is a good method for improving performance.
A: True
B: False
Ans : B
69. To save information on a list line for use after the line is selected, use this keyword.
A: APPEND
B: EXPORT
C: WRITE
D: HIDE
Ans : D
70. To bypass automatic field input checks, include this in PAI.
A: AT EXIT-COMMAND
B: ON INPUT
C: ON REQUEST
D: LEAVE TO SCREEN 0.
Ans : A
71. Within a function module's source code, if the MESSAGE_RAISING statement is executed, all of the following system fields are filled automatically except:
A: SY-MSGTY
B: SY-MSGNO
C: SY-MSGV1
D: SY-MSGWA
Ans : D
72. The following code indicates:
REPORT ZLISTTST.
START-OF-SELECTION.
WRITE: text-001.
FORMAT HOTSPOT ON.
WRITE: text-002.
FORMAT HOTSPOT OFF.
AT LINE-SELECTION.
WRITE / text-003.
A: Text-002 may not be selected.
B: The value of text-002 is stored in a special memory area.
C: Text-002 may be clicked once to trigger the output of text-003.
D: None of the above.
Ans : C
73. The ____ type of ABAP Dictionary view consists of one or more transparent tables and may be accessed by an ABAP program using Open SQL.
A: Database view
B: Projection view
C: Help view
D: Entity view
Ans : A
74. A concrete field is associated with a field-symbol via ABAP keyword
A: MOVE
B: WRITE
C: ASSIGN
D: VALUE
Ans : C
75. The output for the following code will be:
report zabaprg.
DATA: char_field type C.
char_field = 'ABAP data'.
WRITE char_field.
A: ABAP data
B: A
C: Nothing, there is a syntax error
D: None of the above
Ans : B
76. Page footers are coded in the event:
A: TOP-OF-PAGE.
B: END-OF-SELECTION.
C: NEW-PAGE.
D: END-OF-PAGE.
Ans : D
77. The event AT SELECTION-SCREEN OUTPUT. occurs before the selection screen is displayed and is the best event for assigning default values to selection criteria.
A: True
B: False
Ans : B
78. The TABLES statement declares a data object.
A: True
B: False
Ans : A
79. Assuming tab1-fld7 is not a key field, how can you prevent reading all the table rows?
SELECT fld1 fld2 fld3 FROM tab1 INTO (fld4, fld5, fld6)
WHERE fld7 = pfld7.
WRITE: /1 fld4, fld5, fld6.
ENDSELECT.
A: Take fld7 out of the WHERE clause.
B: Create an index in the ABAP Dictionary for tab1-fld7.
C: Use INTO TABLE instead of just INTO.
D: Take the WRITE statement out of the SELECT_ENDSELECT.
Ans :
80. Which of the following is NOT a required attribute when creating an ABAP program?
A: Application
B: Title
C: Status
D: Type
Ans : A
81. When creating a transparent table in the ABAP Dictionary, which step automatically creates the table in the underlying database?
A: Adding technical settings to the table
B: Checking the table syntax
C: Saving the table
D: Activating the table
Ans : D
82. Within the ABAP program attributes, Type = 1 represents:
A: INCLUDE program
B: Online program
C: Module pool
D: Function group
E: Subroutine pool
Ans : B
83. If this code results in an error, the remedy is:
SELECT fld1 SUM( fld1 ) FROM tab1 INTO_
A: Remove the spaces from SUM( fld1 ).
B: Move SUM( fld1 ) before fld1.
C: Add GROUP BY f1.
D: Change to SUM( DISTINCT f1 ).
Ans : C
84. Which keyword adds rows to an internal table while accumulating numeric values?
A: INSERT
B: APPEND
C: COLLECT
D: GROUP
Ans : C
85. Assuming itab has a header line, what will be output by the following code?
READ TABLE itab INDEX 3 TRANSPORTING field1.
WRITE: /1 itab-field1, itab-field2.
A: The contents of the third row's itab-field1.
B: The contents of the third row's itab-field1 and itab-field2.
C: The contents of the third row's itab-field2.
D: Nothing.
Ans ; A
86. The following code indicates:
SELECTION-SCREEN BEGIN OF BLOCK B1.
PARAMETERS: myparam(10) type C,
Myparam2(10) type N,
SELECTION-SCREEN END OF BLOCK.
A: Draw a box around myparam and myparam2 on the selection screen.
B: Allow myparam and myparam2 to be ready for input during an error dialog.
C: Do not display myparam and myparam2 on the selection screen.
D: Display myparam and myparam2 only if both fields have default values.
Ans : A
87. Which statement will sort the data of an internal table with fields FRUIT, QTY, and PRICE so that it appears as follows?
FRUIT QTY PRICE
Apples 12 22.50
Apples 9 18.25
Oranges 15 17.35
Bananas 20 10.20
Bananas 15 6.89
Bananas 5 2.75
A: SORT itab DESCENDING BY QTY PRICE.
B: SORT itab BY PRICE FRUIT.
C: SORT itab.
D: SORT itab BY PRICE DESCENDING.
Ans : D
88. Which keyword adds a line anywhere within an internal table?
A: APPEND
B: MODIFY
C: ADD
D: INSERT
Ans : D
89. To read a single line of an internal table, use the following:
A: LOOP AT itab. _ ENDLOOP.
B: READ itab.
C: SELECT SINGLE * FROM itab.
D: READ TABLE itab.
Ans : D
90. Which Open SQL statement should not be used with cluster databases?
A: UPDATE
B: MODIFY
C: DELETE
D: INSERT
Ans :
91. To include a field on your screen that is not in the ABAP Dictionary, which include program should contain the data declaration for the field?
A: PBO module include program
B: TOP include program
C: PAI module include program
D: Subroutine include program
Ans : B
92. This flow logic statement is used to make multiple fields open for input after an error or warning message.
A: GROUP
B: FIELD-GROUP
C: CHAIN
D: LOOP AT SCREEN
Ans ; C
93. Given:
PERFORM subroutine USING var.
The var field is known as what type of parameter?
A: Formal
B: Actual
C: Static
D: Value
Ans : B -
My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError P1 : c000009c P2 : 00000003 . I have tried to reinstall but no joy. Any advise?
'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
I want to edit Pictures that are on my External Hard Drive Using iPhoto without having to import them every time, it was suggested to me to use Aperture. any advise is appreciated
Aperture is a nice program, I use it myself for it's adjustment and light editing capabiities.
You can save a vault on another drive. -
Upgrade question for ISE 1.1.1 to 1.1.2 patch 8
Hi everyone,
I need some advise on upgrading from ISE 1.1.1 patch 3 to 1.1.2 patch 8...
I have read the upgrade document on the Cisco website http://www.cisco.com/en/US/docs/security/ise/1.1.1/upgrade_guide/upgrade.html and tried to understand it properly, but I have a couple of questions about it.
Firstly, the procesdures detailed are only relevant if you are upgrading from 1.0 or 1.1 to 1.1.x ( i think )... Well I am already running 1.1.1 and I want to upgrade to 1.1.2 patch 8, so is this document right for me?
Secondly, I would like to follow the procedure for a "Two Admin Node Deployment". But the caveat message and Warning message directly below the diagram worries me as I do not know whether these apply to me...
This supports an upgrade of Cisco ISE, Release 1.0 or 1.1 to Cisco ISE, Release 1.1.x with split domain upgrade only, so that the secondary ISE node has to be deregistered individually from the deployment before upgrade.
As I said, firstly I am not upgrading from 1.0 or 1.1 and secondly, what is a split domain upgrade?
Hope you all can help!
thanks
MarioThanks Ravi / Tarik,
so I need to perform a split domain upgrade by following the steps below... (sorry about the formatting)
To perform a two-adminnode deployment upgrade, complete the following procedure:
Step 1
Perform an on-demand backup (manually) of the Primary Administration ISE node from the admin user interface or CLI and an on-demand backup of the Monitoring node from the admin user interface, before upgrading to Cisco ISE, Release 1.1.x.
.Step 2Deregister the secondary node (Node B) from the deployment setup. After deregistration, this node becomes a standalone node.Step 3Upgrade this standalone node to Cisco ISE, Release 1.1.x.When you log in to Node B after the upgrade, if the system prompts you for a license, you must install a valid license for the secondary node based on its UDI. See Obtaining a Valid License, page 1-2 for more information.For more information on how perform an on-demand backup, see the "Performing an On-Demand Backup" section on page 1-3
Step 4Convert the primary node of the previous deployment (Node A) to a standalone node.Step 5Make Node B as the primary node in the new deployment.Step 6Upgrade Node A to Cisco ISE, Release 1.1.x and register to Node B in the Cisco ISE, Release 1.1.x deployment setup as the secondary node.
After you upgrade your deployment, all the policies and other data of the previous deployment will be retained in your new deployment. -
Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?
Some progess I see. To be honest, i would not waste your time with trying to connect using wireless.
You are likely to get poor connections and dropping out.
If its working using a cable, then there is no need to bother with giving me the network settings, bu see how it goes, because sometimes giving the TV a static IP address can give better results.
There is an example of a couple of powerline adapters on the diagram below. Just ignore the network switch unless you want to connect other devices which are near to the TV.
http://forumhelp.dyndns.info/networking/powerline3.jpg
I will monitor the subject line of this thread, should you want to post any more information.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
I have I-phone 5 with 15 GB. I currently have used 12.8 GB. I get error message that storage is almost full, I go to setting and my mail is using 5.7 GB. Can that be how alot of my storage is being used? If so or not any advise?
caek1 wrote:
Hi,
I'm trying to change email address on my Apple ID since the email registered for the account has been hacked and I can't access it anymore. The email I want to change to is connected to another Apple ID I created about 4 years ago, though I successfully changed the email on that account as well. So the email I would like to use for my main Apple ID shouldn't be "locked" anymore.
Though, when trying to change the email on my Apple ID I get an error message (in Swedish, so this is a direct translate from google): "This e-mail address is your email address for notification. It can not be used as the Apple ID or primary email. Choose a different address."
I'm not really sure what this means or how I can fix this.
It means exactly what it says... The email Address is in Use. You cannot re-use it.
Apple ID Support > http://www.apple.com/support/appleid/
Maybe you are looking for
-
How do I have dual monitor for different windows
I wanted to use two monitors. One to monitor my file while the other as my working window. I am using Imac Intel Duo Core 17" and I heard that I need to buy the adapter. If I buy the adapter, what else need I click so that the FCE can be split into 2
-
Can anyone help me copy and paste photos from iPhoto to memory stick
can anyone help me to copy and paste photos from i photo to a memory stick...no the same as my pc and just can't figure it out thanx
-
HT201209 it doesnt work please help... it says it hasnt been probaly actiated ?????
It does not work ((( It says it hasnt been probaly activated my gift card was 15 pounds too please help
-
How to DEPLOY and ACCESS JSR 168 portlet in weblogic server
I installed Web Logic Server 10.3, Web Logic Portal 10.3 and Workshop 10.3 on my system. I created a sample portal application in workshop and able to see the output with the help of workshop. 1. I imported JSR 168 portlet in "Import Utility" and abl
-
ITunes music for iPhoto Slideshow
Not able to use files from iTunes for iPhoto Slideshow. Only SAMPLE MUSIC. This is the message that I get > iTunes The song "The Sad Cafe" could not be used because the original file could not be located.