Hi any body having configuration material on Generic with holding tax

Hi SAP Guru's
Any body having configuration material on Generic with holding tax
Please help me on this because presently i am working UK porject when i am executing transaction code S_P00_07000134 getting no list genarated
Please give me some inputs
Regards,
satya

Hello abhijeeth,
Sent!! chk u r mail for the notes.
Regrads,
shashikanth,
Asssign points for usefull answer.

Similar Messages

Can any body send me material on Work flow

Hi gurus,
Can any body send me material on Work flow.
Regards.
Naveen

Hi,
Check the following links:
http://www.sapbrainsonline.com/TUTORIALS/TECHNICAL/WORKFLOW_tutorial.html
http://sapmaterial.com/workflow.html
http://www.sap-img.com/workflow/sap-workflow.htm
Regards,
Bhaskar

With holding tax report with material and qty fields

Dear All,
Is there any standard report available with with holding tax data with material and qty fields.
Thanks,
Sekhar.

dear Friend,
Withholding tax will deduct on services. Hence Material and quantity is not relavent.
There is no report is available also.
reg
Madhu M

With Hold Tax formula..(if any condition required to applied)

Dear Experts,
Formula where we will put in the wealth tax? In case company is required to pay rent. Up to Rs. 20000 need not required to deduct the tax?
or
TDS required to deduct in professionals only if professional charges exceed Rs.20000.
For this purpose where we define the formula?
Thanks in Advance
Regards,
Venkat

Hi
There are multiple ways to look at it:
1. In the path specified in the previous post, for a combination of With Holding Tax Type and Code, you can define the amounts and the rates. For eg, under 194C, there is a tax Type CI and Tax Code C1. Now in this you need to deduct TDS @ 2% upto Rs 20000 and TDS @ 10% above Rs 20000. So in the formulae, you can maintain the following configuration
Tax Type Tax Code    Base Amount Upto     Percentage
CI               C1              20000                            2
CI               C1               999999999                   10
However, there are certain issues here:
a, There is no provision for validity dates and place to maintain exemption nos
b. For different vendors you may have differentials rates from IT. In that case you may need multiple tax codes to take care of specific rates.
2. You can use a BADI to write your own custom logic. The BADI is FQST_CIN_WITHITEM
Regards
Sanil Bhandari

Hi-can any body give me material of (XI)

HI ALL,
iam venu gopal ,i working in abap ,can any body give matetail of xi ..plz send to me
my mail id [email protected]
thanks & regards
venu gopal

Hi,
Welcome to the world of XI.
the best way to learn XI would be to use the Wealth of material available in XI from its forums, weblogs, presentations ,etc.
Also, I would suggest this link on SAP help for any info that you want on XI,
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
Further, this thread deals with everything that is needed for a starter on XI. Do check it out,
JDBC Receiver: exact SQL statement
/message/527697#527697 [original link is broken]
Re: XI Beginner
Meanwhile,following are the links to weblogs which will help to develop the basic scenarios.
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 - File to JDBC
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - File to ABAP Proxy
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1 - File to File Part 1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 - File to File Part 2
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] - File to Mail
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi - Message Flow in XI
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
/people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally - Maintain RFC destination centrally
/people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u - Triggering Email from folder
/people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party - Handling different partners for IDoc
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible - Testing of integration process
/people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects - Authorization in XI
http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm - Authorization in XI
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
/people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi - Call UNIX Shell Script
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi - Transport in XI
/people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping - Using ABAP XSLT Extensions for XI Mapping
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
/people/sap.user72/blog/2005/11/17/xi-controlling-access-to-sensitive-interfaces - Controlling access to Sensitive Interfaces
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - The same filename from a sender to a receiver file adapter - SP14
/people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine - Payload Based Message Search in XI30 using Trex Engine
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i - XI : Configuring CCMS Monitoring for XI- Part I
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter - XI: HTML e-mails from the receiver mail adapter
/people/sap.user72/blog/2005/11/22/xi-faqs-provided-by-sap-updated - XI : FAQ's Provided by SAP
Regards,
Bhavesh

Is Any Body Having this Issue on there Razr or Maxx with I.C.S.!

When i go to the Web on my Maxx that i have I.C.S installed on and i do a Search by Tapping on the ( Mike ) icon it comes up and is ready for me. i say who i want it to Search for Like weatherbug.com and when it does the search it comes up Like this Weatherbug.com with the First Letter in Capital instead of Lower Case) it will show the web site for a Brief second then it will take it way and will not Let me go ahead and do the Search.
The only way it will let me Complete the Search is if i type it out my self. It should be able to do this with out the issue i Described..
On my other Maxx with Gingerbread it Works Fine when i tap the Mike and say what i want it to search for.!
I'm getting to wander if this is another I.C.S Blunder or is there a setting that i Over Looked that is Causing this
If any body has a Suggestion or Has had this same Issue happen to them on there Razr /Razr Maxx please Post: Thanks..b33

What it's doing Ann is when i do a Voice Search it is Auto Capitalizing the first Letter in the search box it doesn't matter who or what i say it's doing this and i thought maybe by getting rid of Adobe Flash that might Be the Culprit but this Baby is throwing me a Curve Ball and i Don't know what to do with it. When i'm doing a search for let's say androidcentral.com it comes up like this
Androidcentral.com <--this is in the search Box
androidcentral.com <--this is directly below the Search Box and it only stays there for a few seconds then it disappears
it does't give me time to Tap on it and use it.
I have tried Clearing the settings, i Unchecked Auto Capitalization or at least i thought i did there are so many different things you can do or try to do but it's getting the Right one. that counts all i know is i'm gonna keep trying..

Any Guidelines on Configuring Weblogic 8.1 with Node Manager

Hi All, I want to configure Weblogic 8.1 with Node Manager using 4 ports. Is there any step by step guide? Please let me know...
Currently I am referring to this link:
http://download.oracle.com/docs/cd/E13222_01/wls/docs81/adminguide/nodemgr.html
Thanks.

Hi,
Hope the below link may be little helpful: http://middlewaremagic.com/weblogic/?p=971
NOTE: you need not to follow Step8). mentioned in above link because.... WLS8.1 nmEnroll() is not available as part of WLST ...In WLS8.1 no need to start the NodeManager. You can also ignore the Clustering part in the above link ...rest all you need to follow.
Thanks
Jay SenSharma

I need to know if any body is using this hard disk with leoardandtimemachin

Hi i need to know if any body has tried to use this hard drive with time machine and leopard and if any body has have any problems using it with these applications the external hard drive is:
Lacie brick lego hard drive, usb 2 high speed, 7500rmp refrence, 301150U from 2006 thanks

I am not using that drive, but I would recommend a FireWire drive (FireWire 800 if available), for better speed and reliability.

In my App Store showing paid apps in the chart of free apps .... Is this the software problem .? Did any body having this same issue ? Plz tell me

In my iPhone 5s in App Store showing paid apps in the column of free apps ..... Is this software issue ?

Apps are permanently tied to the account used to download them. It was behaving exactly as it should have.

Has any body tried using canon printer driver with Mac OS X v10.7. I just bought a new printer only finding out that I cannot use it. Any suggestions. Thanks

I just bought a canon pixma iX6540 printer only to find out that the driver is not supported. I am using Mac OS X v10.7. Can someone help please. Thanks

Although it mentions OS 10.6 on the link, have you tried downloading the latest drivers - if you haven't already - from the Apple Support site, maybe they'll work:
http://support.apple.com/kb/DL899

Does any body know if all itouches come with a warrenty?

so my itouch is cracked bad. does anybody know if all ipod touches come with a warrenty and if apple replaces ipods for free under warrenty?

When you purchase an iPod, it comes with a 1 year warranty with 90 days of phone support and an option to buy AppleCare to extend another year (total 2 years) after purchase. Unfortunately Apple does not replace because of accidents, spills, modifications, etc.:
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipod
Look under "What types of damages are not covered by my warranty.
But you can get it repaired by Apple for a price.

With holding tax configuration.

HI All,
our client wants to use withholding tax for customers during the payment. I have configured extended withholding tax in SPRO and assigned to customer master record. also working fine when i create the invoice at FI side using FB70/F-22 for customers.
but when I create the invoice from SD side(VA01) itu2019s not working. I have create the statistical condition type ZJ1W and assigned to my pricing procedure VA001. linked this pricing procedure to sales order ,distribution channel and division.
i want this condition type to be auto when I create the sales order in VA01. for this I am trying to maintain the condition records.
but when I try to create the condition records in VK11 for this condition type. I am getting the below error message.
Condition type ZJ1W is not linked to a withholding tax type in country MY
Message no. 8A142
Diagnosis
The condition type is not linked to a withholding type and therefore not usable for the extended withholding solution. Please ensure correct settings in the customizing. Ensure especially that one condition type is only allocated to one withholding type.
please can anybody help me to solve this issue. i am wonder my withholding tax already assigned to country MY and its working fine at FI side. but not working at SD side.
please help me if anybody face this problem before..
thanks in advance...
Regards,
Sandhya.

hi
http://help.sap.com/erp2005_ehp_03/helpdata/EN/e4/5c823ae35c3769e10000000a114084/frameset.htm
for futhur notes
http://help.sap.com/search/search_overview.jsp
nagesh

Standard cost update for configurable material- CU50

Hi,
I am trying to update standard cost for a configurable material using CU50 with reference to the sales order.
System gives a warning message :- Configuration of raw material still not included in price determination
Message no. CK784
Also the save tab is greyed out.
this is the case with all config material
A solution to this would be highly appreciated.
Thanks

Hi,
Refer note 362193 and check if that helps.
regards
Waman

Any body got this file EXTERNAL-RHEL4-10gR2-DVD2-Linux-v2.0.zip

Hello All,
please if any body got this file share it with me !
thanks and regards

Hi
After registering into redhat.com
When I try downloading EXTERNAL-RHEL4-10gR2-DVD2-Linux-v2.0.zip ,
I have to go to the below:
4) Select "Channels" from the toolbar at the top of the page.
5) Select "Easy ISOs" and then click "view the complete list of
software channels with ISO"
6) Choose "Red Hat Enterprise Linux AS x86, AMD64, EM64T, & Itanium"
7) Select the appropriate "Binary Disc's" for your Red Hat solution and
architecture
8) Use whichever tool you are comfortable with to burn the ISO images
to a CD
But still i do not see the EXTERNAL-RHEL4-10gR2-DVD2-Linux-v2.0.zip
Can you please advise on
a. where I can get EXTERNAL-RHEL4-10gR2-DVD2-Linux-v2.0.zip
b. if not atleast which of the CDs from the channels on redhat.com I need to be downloading
Can you please help?
Thanks a lot
Cyril

Generic with holdingtac report T Code : S_P00_07000134

Hi,
I am executing the generic with holding tac report RFIDYYWT ( T Code S_P00_07000134 ).
the report should
1) All vendor invoices paid
2) All credit memos paid
3) All open down payments i.e. down payment paid but not yet settled against a final invoice.
But , I am getting only 1 & 2 documents ( above mentioned ) it means that I am not getting the All open down payments documents in the report output.
please do the needful ASAP.
Thanks in Advance
Arjun

Resolved by using Check Register

Hi any body having configuration material on Generic with holding tax

Similar Messages

Maybe you are looking for