Hi, any help? LR 5.7 won't print.

Hi having new trouble with LR5 Print module, trying to print to Epson R3000 press print LR finds printer then sends data then says its printing there is some activity in the printer like print heads moving over then job disappears from print queue. Have reinstalled LR, Printer and printer drivers.??????????????????????????????? GRRRR

Start from here. click on Lightroom then select Download or Free Trial.
The CC and the stand-alone version use the same installer. You can run as 30-days trial and decide later if you want to subscribe fro a CC plan or want to license as stand-alone.

Similar Messages

Help-HP Officejet 6500-Won't print Black text

Well, I have tried all of the suggestions on this site. My black ink gradually started fading out, so I assumed I needed a new cartridge, but that wouldn't print either, so I put back the old cartridge, which my computer said is half full. I tried resetting the printer 2 or 3 times, tried disconnecting it with the printer both off and on at the time of disconnect, tried realigning twice, tried cleaning the vent hole on the cartridge (which doesn't look like there's even an opening, but it was working before, so it must be like that), and removing the cartridge holder and washing it in the sink. It still does not work. This printer is about 3 or 4 years old. It has worked fine, but it's annoying, because every time you turn it on, it goes through this major resetting process, and it does that after about three or for print jobs, and you have to wait for it to finish. We never could figure out how to set up the fax machine. Does anybody have any other ideas about how to get the black ink to work? I'm using up all my colored ink printing out these test pages!
This question was solved.
View Solution.

It sounds like you have already done quite a bit of troubleshooting for this issue. It sounds like the next step in troubleshooting is to test replacing the printhead. However, before going that route try looking at the troubleshooting document that I will link below.
Troubleshooting Print Quality Issues
* With the printer being 3-4 years old I would say the printer is most likely out of warranty. In this case, one would have to purchase the printhead to test if this resolves the issue. The printhead can be purchase from the HP Parts Store using the part number CN643a. It currently sells for around $70 usd.
With the price of the printhead, I would advise looking into a new printer. The reason being that one could find a new printer for not much more than this and it would come with a full factory warranty.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

A mate has an iphone 4 as a work phone and needs to get all data incl messages onto an old iphone 3 as he is leaving. Is this possible, any help appreciated

A mate has an iphone 4 as a work phone, now he is leaving and needs to get all data incl messages etc onto an old iphone 3. Is this possible, any help appreciated.
Robbie

You won't be able to restore a device running iOS 4.2 from a backup of a device running iOS 5 (as you found out). And the Iphone 3G can only be updated to iOS 4.2.1 so there is no way to migrate from his iPhone 4 back to his iPhone 3G. He would have to at least have an iPhone 3GS, which will update to iOS 5.1 and would be able to restore from the iPhone 4 backup. Unfortunately, there isn't any way around it.

Won't print any .pdf files

I cannot get any .pdf file to print from my Macbook. Is there something i might have inadvertently checked or unchecked or done that might have made this happen? It doesn't matter if it is a file I create or if it is an email attachement, they all send to the printer and then in the printer tray it says stopped and won't restart or print.
Thank you for any help.

More information...
the printer says "error cannot create pdfdocumentref and then a window pops up that says
client-error-not-possible"
any ideas what that means?

HT1695 My iPad will not except my Kodak ESP 1.2 printer via wifi any help please

My iPad will not except my Kodak ESP 1.2 printer via wifi any help please

Is that model a wifi printer? As far as I know, there are no kodak printers that are air print enabled. So you have to use a third party helper of some kind.
Look on Kodak's site. They have options for various models. There might be an app that will help, I believe some models also work with google documents.
If none of those work then you can look to third party apps. I have Print n Share and it works with my iPad, but there's also Printopia and Print Central and I'm sure there are others.

I have an Apple Iphone 3G which I use as an Ipod...which has the 4.2 operating system. I had to 'restore' it and now it won't let me download the Facebook app...says I need to upgrade to a 4.3 system. Any help you can provide me with that?

Hi...I am new to this site and it looks like I posted the question in the subject box...my bad.
I have an Iphone 3G which is used as an ipod (phone service plans are too expensive).
I had some apps on it, Facebook being one of them. The device was goins soooo slow (not even 2G of the available 6 being used) so I did as instructed and backed it up, restored it and then put the info back into it. When I tried to download the Facebook app...it said that I had a 4.2.1 system and needed a 4.3 something system? Can anyone provide any help on this or am I doing something wrong?
Thank you in advance

Sorry. There's nothing anyone can do. The current version of the facebook app will not run on 4.2.1. The iPhone 3G won't run anything higher than 4.2.1. You're stuck.
Maybe it's time to buy yourself a new iPod Touch.

My Game Center won't work on my iPod touch 2nd Gen. It let me sign up but it won't load any of my games and won't let me play with my friends. I don't know why? Any help?

My ipod touch 2nd Gen let me sign up to game center but it won't load any of my games and won't let me play with my friend. I don't know if it's like this because it is old and slow, or what. Please help me figure this out. Thank You.

Try:
- Sign out of Game Center and sign back in
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

Hi my ipod touch 8gb won't turn on just get the apple sign in middle of screen and my laptop also can't find my ipod wen i plug it in? any help would be greatly appreciated thank you.

hi my ipod touch 8gb won't turn on just get the apple sign in middle of screen and my laptop also can't find my ipod wen i plug it in? any help would be greatly appreciated thank you.

OR use this method
1. Press-hold the Home button (big circle below the screen)and the Sleep/Wake button (on top of the iPhone) simultaneously.
2. Continue holding both buttons (Ignore the"Slide to power off") until the iPhone shuts off and begins to restart.
3.You may let go when you see the silver Applelogo.
Thats all Folks!!

My iPhone won't sync to my iTunes because it says my computer is not authorized. When i do authorize it, it claims to already be authorized. When i re-sync my phone it says it is unauthorized. Any help?

my iPhone won't sync to my iTunes because it says my computer is not authorized. When i do authorize it, it claims to already be authorized. When i re-sync my phone it says it is unauthorized. Any help?

Hello katey1717
If you are getting the repeated prompts of asking to authorize your Apple ID, then check out the article below to resolve the issue. Make sure that you go through and remove the SC Info folder and try to authorizer again as that resolved it for me when I had that issue.
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
Regards,
-Norm G.

I just updated my Iphone 3G and now it won´t work anymore. It wouldn´t even boot. It was just working for 3 sek. after the installation and now it shut itself down. Any help, please?

I just updated my Iphone 3G and now it won´t work anymore. It wouldn´t even boot. It was just working for 3 sek. after the installation and now it shut itself down. Any help, please? Thankyou

I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.
You also said: "It also will not let me download any music onto it." What happens when you try to sync music to the iPod?

I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer." I have tried to update my settings, but this doesn't seem to work. Any help would be much appreciated

I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer." I have tried to update my settings, but this doesn't seem to work. Any help would be much appreciated

Hard Drive: The Hard Drive is on my camera (Sony Handycam)
Just needed some info on what is going on with your particular system.
Knowing the exact camera model will also assist us.
If this camera is standard AVCHD you should be able to connect with USB to Mac with FCE open and use Log and Transfer without all the fiddling around converting etc.
What FCE does during ingest is convert files to AIC. (Apple Intermediate Codec)
FCE cannot read the individual files in the BDMV folder, that's why all the converting is required when you use that method.
BTW: regards formatting drives/cards/memory on cameras; it is wise to use the actual device to format rather than a computer. This is a prime cause of read/write goof ups with solid state media. This applies to still or video cameras.
Keeping the COMPLETE card/memory structure in tact is vital for successful transfers.
Try here for some trouble shooting tips:
https://discussions.apple.com/message/12682263#12682263
Al

Updated iTunes to 10.5, iTunes won't work now! Everytime I open iTunes it just freezes and I can't click on anything. It says to take it out of compatibility mode and still doesn't work! any help??

Updated iTunes to 10.5, iTunes won't work now! Everytime I open iTunes it just freezes and I can't click on anything. It says to take it out of compatibility mode and still doesn't work! any help??
Thank you. Nick

Okay, we'll try the technique from the following post. Be sure to be logged in to your usual user account when doing so. (Otherwise you'll be editing the wrong set of HKEY_CURRENT_USER keys.)
Re: How do I turn off the compatibility mode for ITunes.
Does that clear up the compatibility message?

I somehow installed a version of Firefox which won't work on my "old" iMac G5 (10.5.8) so I trashed the program and now I can't get it out of my trash bin... Any help appreciated because now I can't empty my trash at all! Thanks.

I somehow installed a version of Firefox which won't work on my "old" iMac G5 (10.5.8) so I trashed the program and now I can't get it out of my trash bin... Any help appreciated because now I can't empty my trash at all! Thanks!!

You must purchase a new QT key for each computer.
Since you have a new iMac, you are entitled to 90 days of FREE phone tech support from Apple and you can use the Chat with a Support Agent. The online chat support _*is available 24 hours a day, 7 days a week.*_
If you've purchased an AppleCare Protection Plan, you're eligible for the duration of that agreement.

After installing the 64 bit version of itunes my iphone still won't sync. I get the explantation that I mobile driver application did not download and i need to remove and reinstall itunes (which I have done numberous times). Any help?

After installing the 64 bit version of itunes my iphone still won't sync. I get the explantation that I mobile driver application did not download and i need to remove and reinstall itunes (which I have done numberous times). Any help?

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, does your device connect without that message now?

Have Photoshop Elements from 2001. Got new computer with Windows 7 Professional 64 bit. It won't run on my new computer. What version is MOST SIMILAR to the old version I have, that will run on W7P-64? Thanks for any help. Popjer

Have Photoshop Elements from 2001. Got new computer with Windows 7 Professional 64 bit. It won't run on my new computer. What version is MOST SIMILAR to the old version I have, that will run on W7P-64? Thanks for any help. Popjer

You should probably just download the trial version of pse 12 and see if you can live with it.
Download a free trial or buy Adobe products | Adobe downloads
That being said, have you tried to install pse 1 on your computer?
How much free space is on your hard drive?
Do you have Internet Explorer 10 or 11?
Pse 1 can run on windows 7 x64, provided certain conditions are met.

HT4796 After migrating all of my adobe software (Cs4, cs5, etc.) to my new imac, the software won't open due to many errors. Any help on this?

After migrating all of my adobe software (Cs4, cs5, etc.) to my new imac, the software won't open due to many errors. Any help on this?

Welcome to the Apple Support Communities
Adobe software is conflictive when you use Migration Assistant because their applications don't work properly after migration. If you keep the DVDs or the installers of your software, use them to reinstall all your Adobe applications and they should start working correctly

Hi, any help? LR 5.7 won't print.

Similar Messages

Maybe you are looking for