Hi Are there any known compatibility issues with Lopic Pro 9 and Adobe PDF 9?

Hi I am am Using a MacPro OS 10.5.8 2x2.66 GHz Dual-Core Intel Xeon and Logic 9.1.5. Also Adobe PDF 9.0
I can't print my score to pdf. The print box openes but The print button and the preview butten are not responsive!
Is any body else experiencing the same issue?
T.

Only Logic Pro 9.1.8 is officially supported under Mavericks. So: update!

Similar Messages

Are there any known compatibility issues with iMac and Google Chrome?

Does anyone know of any compatibility issues with iMac and Google chrome. A Facebook friend who is a photographer posted recently that Chrome had ruined his iMac. He stead that it ran an update on itself that made safari and chrome unusable - slow running overall. In the end he had to reinstall his OS.
Is anyone aware of this and should I un-install Chrome off my Mac?
Thanks,
S.

There is nothing official but your post will attract a variety of personal experiences. I once loaded Chrome and found myself with the dreaded MacKeeper malware, loads of pop ups and conflicts with my system. Part of the problem is the huge range of add ons you are tempted to take on, many of which are not as strictly tested as Apple extensions. I would say, unless you have a specific reason, leave it alone. The best browser is Firefox and for Macs, Safari is OK.

Any known compatibility issues with disabling onboard sound and using

I have the K7 N2 board and disabled on board sound in the bios to use my Turtle Beach Santa Cruz. Sound seems to work fine in Windows Xp and the few games I have installed so far. My problem is with UT2003. When I try to launch the game I get the splash screen then it simply goes away. When I checked the system folder and looked at the debug log it shows the following.
Exception code: c0000005
Exception address: 77f51f2c 0001:00000f2c C:WINDOWSSystem32
tdll.dll
Call stack:
   77f51f2c 0001:00000f2c C:WINDOWSSystem32
tdll.dll
   77f5268e 0001:0000168e C:WINDOWSSystem32
tdll.dll
   77f52631 0001:00001631 C:WINDOWSSystem32
tdll.dll
   7639131d 0001:0000031d C:WINDOWSSystem32IMM32.dll
   77f5e52d 0001:0000d52d C:WINDOWSSystem32
tdll.dll
   77e798cc 0001:000188cc C:WINDOWSsystem32kernel32.dll
   77e7990f 0001:0001890f C:WINDOWSsystem32kernel32.dll
   7c00442a 0001:0000342a C:Program FilesUnreal Tournament 2003SystemMSVCR70.dll
   77e814c7 0001:000204c7 C:WINDOWSsystem32kernel32.dll
I am able to run UT in safe mode without sound. I yanked my Santa Cruz card and uninstalled the drivers and tried with on board but still had the same problem. Since disabling the sound allows me to play, it has to do something with either the on board or my card or some sort of incompatibility between the two. Anyone know of any issues? On a side note. If I was to wipe my drive and use the on board is the quality of the sound as good as using a separate card? Any help would be appreciated.

Just a follow up...I figured I could spend countless hours trying to figure out why UT wouldn'l load or spend 3 hours wiping the disk and reinstalling software. The latter proved to be worth it. My preference would have been not to install any of the audio drivers at all, but since they are bundled with the system drivers there is really no choice. The one thing I did differently was not to install the live drivers from the disk that came with my board but rather update to the newer Nforce 2 system driver dated 2/25/2003.
So the install went Xp Pro, Sp1, Video drivers, newest system drivers, disable on board sound in bios, Santa Cruz drivers then UT2003 and the game loads fine. I still get the message about the game port not having enough resources but that can be ironed out.
Hopefully this information can help someone else out who might experience conflicts going forward.
A side note..I find that with two network cards (3Com and on board) that Xp will spend about three mintues after it loads non responsive as it looks for the other network connection. Running the network wizard on box 1 connected to the internet and creating the network disk and running it on the other machine allowing the on board card to see the network and eliminates the painful lull after Xp load to the time I can do anything.
Thanks for the timely responses. I'm really enjoying this board. So many options, so little time.

Any known compatibility issues with Norton Antivirus for Mac v.11

I sometimes work freelance for a company that requires freelancers to have an antivirus program on their computers regardless if they are macs.
Anybody know if there are any known compatibility issues with mac Norton Antivirus v.11 and snow leopard?
thanks

Big time. Do not, do not install anything Norton. Your system will be mucked. Comply with the company request and use ClamXav.
http://www.macupdate.com/app/mac/15850/clamxav

Issues with mac pro 2014 and Adobe CC

Having major issues with my New Mac Pro since installing 10.9.3. The issues are with render in Adobe CC products and glitches on displays.
Model Name:          Mac Pro
Model Identifier:          MacPro6,1
Processor Name:          12-Core Intel Xeon E5
Processor Speed:          2.7 GHz
Number of Processors:          1
Total Number of Cores:          12
L2 Cache (per Core):          256 KB
L3 Cache:          30 MB
Memory:          64 GB
Boot ROM Version:          MP61.0116.B05
SMC Version (system):          2.20f18
Illumination Version:          1.4a6

Well known issue and no solution yet. There is nothing wrong with your computer. http://9to5mac.com/2014/05/21/os-x-10-9-3-breaking-mac-pro-graphics-card-compati bility-with-critical-pro-apps/

Are there solutions to Compatibility Issues with Thunderbird, Windows 8.1 and Anti-Virus Software, e.g., MacAfee?

Since I upgraded to Windows 8.1, Thunderbird freezes up and goes into "Not Responding" mode repeatedly every few minutes. My research indicates that it is a problem with compatibility with antivirus software, which obviously is needed with an e-mail program. How can this problem be solved, or is there an antivirus program that works seamlessly with Thunderbird and Windows 8.1?

Personally I use ESET NOD32. It is not cheap, but it is unobtrusive and appears to get the job done. Originally I was drawn there for their server protection, but since I no longer have windows servers that need is gone, but I see no reason to change.
Previously over the years I have used;
* Norton (Found it just to much embedded into the operating system. Something went wrong with it and Windows would not boot.
* Microsoft Security Essentials. Any application using large data files was unworkably slow. That included Thunderbird.
* AVG It was just clunky and I did not like it.
But the big issue these days is the products are not just anti virus, they are suites including firewalls, password managers/vaults and often spam and scam tools. It is usually these later tools that cause the most issues with the firewalls blocking anything but known versions of known software and spam tools that mess up because it has not had enough testing.
Basically your on your own in selecting a product5. I can not recommend one. But I seriously question the need for mail scanning. Especially after that remarkable admission by Symantec regarding Norton's not scanning mail.
Thunderbird does not run any scripts in mail, nor does it do anything with attachments before you open them and then it decodes them and places them in the temp folder where any good anti virus will scan them.
Personally I suggest anti virus rather than security suite software. Especially so if you use Chrome or Firefox browsers and they both use Google lists of known malware and phishing site to block inadvertent visits.
Windows has a firewall, your modem (over 90%) has one as well, those firewalls block ports, protocols and route traffic. Do you also need one that blocks programs?
Mozilla products have a password manager, do you need another? And so the list goes on.

Any known compatibility issues with snow leopard and cs3 creative suite

have leopard and want to upgrade to snow leopard..but am worried about any conflicts with photoshop cs3 and fireworks cs3? Does anyone use this version and have problems?

The extracts below are from http://snowleopard.wikidot.com/
I couldn't see any mention of a CS3 version of Fireworks.
Anecdotal information is variable; some seem to have no problems, others found CS3 unusable, so it's difficult to be categorical for you. Certainly Adobe only consider CS4 and above to be fully compatible.

Are there any known problems/bugs with Lion pre-loaded?

I'm in the market for a Macbook Pro and am wondering if I'd be better off getting it now before it comes shipped with Lion and install it later on when any bugs are worked out.

When I called last night they said they couldn't tell me if they were going out with Lion yet but reminded me of the free upgrade if it didn't come pre-loaded. The local store I called said they were still selling MBPs without it.

Issue with MacBook Pro trackpad and Adobe Lightroom 5

I'm using Lightroom 5 on a MacBook Pro (mid 2012). Whenever I'm in the development tab I am unable to click on anything within the center third of the screen. If I want to get to the 5th or 6th photo in the bottom pan, I have to use my mouse. I am able to click on things only on the left and right sides of the screen for some reason.
This only happens in Lightroom. Any ideas?

Thanks for the quick reply.
Lightroom 5.7.1
OS X Yosemite (10.10.2)
I'm not using an external display. If it matters my MacBook is a 13".
As an example of what I mean, look at the image below. Everything highlighted in green I'm able to click. After I'm in develop for more than a few minutes, I'm suddenly not able to right click or left click on anything. The typical "mouseover" changes don't happen either, such as the subtly highlighting that happens when you mouse over an image in the bottom pain. As if Lightroom isn't detecting the mouse there at all.

Known compatibility issues with 2008 and 2008 R2

For some reason i am not able to make remote connections from VS 2013 to my current installation of SQL server 2008 so i thought to uninstall it and install another edition i got from MSDN but i the uninstall process keeps failing saying theres a known
compatibility issues with 2008 and 2008 R2. it also gave me the option to seek solution online but when i click on it it is unable to get a solution online and i am never able to uninstall it. please help me here. i need to get SQL server up and running. thanks

Hi FLORENCEOKOSUN,
According to your description, you encounter a compatibility issue when uninstalling SQL Server 2008. For further analysis, please help to post the full error message and
SQL Server summary log. By default, the log can be found in: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log.
There is also a KB article about known issues of installing SQL Server 2008 on Windows Server 2008 R2 for your reference.
https://support.microsoft.com/en-us/kb/955725
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

Are there any known issues with Adobe Edge Animate and Yosemite? Experiencing performance issues since upgrading OS

Are there any known issues with Adobe Edge Animate and Yosemite? Experiencing performance issues since upgrading OS. Animation I was working on that had been performing in browser fine suddenly stopped working, and was not related to any action I had done at that point. Also was working in it today and program stopped responding to key board short cut commands.

I am having a whole slew of odd interface problems with a fresh 2014.1.1 on a fresh macbook pro with latest Yosemite. Program locks up, cursor selections don't show, things disappear. I have a mac mini also and the program runs fine on it. Is there possibly something related to the solid state hard drive in new macs?

Are there any known issues with focus stacking or auto align causing PS to stop responding?

Are there any known issues with focus stacking or auto align causing PS to stop responding?

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Are there any known issue with the HP 3005pr USB 3 replicator ?

Hi,
I recently ordered an HP laptop Pavilion dv6t-7000 with Intel i7 and nVidia video. While the unit isn't due to arrve for about 2 weeks, I'm looking for a docking station/port replicator.
Are there any known issues with the HP 3005pr USB 3 replicator ? Does it fully support Win7 64 bit? I am also considering the Targa U3 unit, but I'd prefer HP if I can be assured that it works.
I'd like to be able to leave the laptop closed when at my desk so I can use an external keyboard, mouse, and monitor.
Does HP make this device or does a 3rd party make it for them?
I've read so many stories on various forums regarding these things.
Any suggestions from HP or others? I need to order something soon, but I don't want head aches when it arrives.
thanks,
Steve

This HP USB 3.0 Port Replicator fully supports with Windows 7 64-bit, if that is the one that you are talking about.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Are there any known issues upgrading to 10.8.3 from 10.7.5 with Parallels Desktop already installed in 10.7.5?

Are there any known issues upgrading to 10.8.3 from 10.7.5 with Parallels Desktop already installed in 10.7.5?

Welcome to Apple Support Communities
Most of the applications compatible with Lion are also compatible with Mountain Lion, so you shouldn't have any problem. Mountain Lion supports the latest update for Parallels 7 and 8, so if you haven't got one of these versions, you should upgrade it before upgrading Mac OS X. That application uses extensions, so it may cause kernel panics

Are there any known issues when using PSE 13 after installing Apple's recent 10.10.3 Combo update for Yosemite?

I've had Yosemite for some time and bought/installed PSE 13 afterwards.
In the last few days I upgraded to Yosemite 10.10.3.
As a PSE 13 novice I've been working my way through "Adobe Photoshop Elements 13 - Classroom in a Book". Working through the exercises I've found my iMac is sometimes taking longer to process the functions I'm using than prior ro the 10.10.3 upgrade. E.g., using the Healing Brush tools, Straighten Tool etc.
I've struggled with Apple's upgrade and had to re-install my machine from a previous Time Machine Backup and so I was wondering:-
Are there any known issues with PSE 13 post 10.10.3 upgrade?
Are there things I should be concerned about in the future before accepting an OS X upgrade?
Thanks,
Andy

No, no known issues. However it's a good idea to always delete preferences after OS X system updates.

Hi Are there any known compatibility issues with Lopic Pro 9 and Adobe PDF 9?

Similar Messages

Maybe you are looking for