Hi been trying to  connect my xbox 360 online  and i am h...

 Hi been trying to  connect my xbox 360 online  and i am having major problems  my router is a WRT54GS v.6 i have the newest firmware also i also use a  linksys  wireless adapter for my pc  i am connecting my 360 to my pc and doing internet connection sharing  i can get a ip address this way but not a dns  if i have ics off i do not get a ip address i have tried everything  opening ports on my  router for the 360 and still nothen  i am about to  break my router and get a differnt one. me need helps.

Yes, you have the ports connected backwards.
The WAN port is labelled with the "circle of dots" icon, and must be connected to your DSL modem.
The LAN port is labelled with the "double-headed arrow" icon, and that is where you connect ethernet cabled devices on your LAN.
See Apple's article AirPort Base Station: About the WAN and LAN Ports
What is surprising is that you haven't previously run into all sorts of problems with your existing setup. Once you cable things properly, you will likely have to power down your DSL modem and Base Station for a while (sometimes just an instant, sometimes overnight). After waiting, plug the modem into power and wait a minute. Then plug the base station into power and wait for it to restart.

Similar Messages

  • I have a 27" thunderbolt display NOT the iMac, and I'm trying to connect my xbox 360 to it via the Belkin AV360. I plug everything in and it does not work? I check all the power cables and and connections and still not he issue. Iv'e tried C-F2 also. Help

    I have a 27" thunderbolt display NOT the iMac, and I'm trying to connect my xbox 360 to it via the Belkin AV360. I plug everything in and it does not work? I check all the power cables and and connections and still not he issue. Iv'e tried C-F2 also. has anyone used this devive (AV360) on there own 27" thunderbolt display (not the imac) and gotten it to work? If so I'd appreciate the help.

    There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

  • Trying to connect an XBOX 360 to my airport base station via  ethernet cabl

    Hello,
    I have the older snow airport base station and was trying to connect my xbox 360 to it via an ethernet port. There are only 2 ethernet ports on the snow base station. one is being used by the cable coming from my dsl modem. the other free port i tried plugging into my xbox 360 to no avail. the xbox cant get an ip address. the open ethernet port on the base station is labeled with the circle logo. the one being used by my dsl modem has the two outer pointing arrows. I turned off the airport to my macbook and tried to connect my macbook to that port my xbox was in and it would not connect to the net either. Is it possible, i have the ports backwards. my wireless internet for all 3 mac computers works fine. Any help would be greatly appreciated!!!!
    Thanks!!!
    Vinny

    Yes, you have the ports connected backwards.
    The WAN port is labelled with the "circle of dots" icon, and must be connected to your DSL modem.
    The LAN port is labelled with the "double-headed arrow" icon, and that is where you connect ethernet cabled devices on your LAN.
    See Apple's article AirPort Base Station: About the WAN and LAN Ports
    What is surprising is that you haven't previously run into all sorts of problems with your existing setup. Once you cable things properly, you will likely have to power down your DSL modem and Base Station for a while (sometimes just an instant, sometimes overnight). After waiting, plug the modem into power and wait a minute. Then plug the base station into power and wait for it to restart.

  • Can't connect to Xbox 360 live with Airport Extreme wirelessly

    Just bought Airport Extreme and Xbox 360 slim and we are having trouble connecting wirelessly.
    When testing connection on Xbox, some problems:
    - MTU setting not high enough
    - does not have assigned IP address
    Been trying all day and getting frustrated.  Any help appreciated.

    Unfortunately, the AirPorts do not offer a means to change MTU settings.
    Additional Microsoft articles on the topic of MTU that may be helpful:
    Xbox 360: You cannot connect to Xbox Live: The console fails the MTU test
    Connection Tests: Maximum Transmission Unit (MTU)

  • Can I use the mini displayport to vga adaptor with the xbox vga cable to connect my xbox 360 to my macbook pro?

    I'm trying to find a way to connect my xbox 360 to my mackbook pro. I've searched the internet and found that I can use a eagle eye device but, its to expensive. So after looking at the xbox website, I found a vga adaptor for my xbox and an vga to mini displayport and I was wondering if this would work.

    The minidisplay port is output only. It's not going to show anything from your xbox.

  • Is there a way to connect an Xbox 360 to an HP TouchSmart 520-1030?

    I have had this HP TouchSmart for well over a 2 years. This one question came to mind. Can you hook an Xbox 360 to an HP TouchSmart 520-1030? I have looked and Looked and found nothing helpful on the web.
    Specs are:  HP TouchSmart 520-1030
                          Intel Core i3-2120
                           4 GB's Of ram
                            No HDMI
    This question was solved.
    View Solution.

    Hello ScreenNameHere,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand you are looking to connect your Xbox 360 to your computer. First if you do not mind what is it that you are trying to do? Are you trying to use the TouchSmart as a monitor to play on or are you trying to use the internet access on the computer? As well, I would encourage you to post which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this we can provide you with accurate information.
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • ANYONE trying to connect to Xbox Live w/ GT704WGB PLEASE READ!!!!

    I have been having issues connecting to xbox live all week. Just got new phone/interent service set up monday(2-22-10) Could not connect to Xbox live, wired or wireless, but had not problem connecting wirelessly w/ laptop. the xbox first said NAT set to moderate and to disable UPnP, after that was fixed it said MTU insufficient and had to be set to 1364 or higher(let me save you the trouble of looking its already set to 1492 by default)  
    Contacted Verizon about this issue several times, along w/ intermittent calls to xbox tech support and even actiontec, until verizon finally got me to buy the premium tech support. Take my advice SAVE your money!!!! They did not fix my problem whatsoever. Actiontec finally told me that it was my equipment, so I contacted Verizon and after fighting w/ TS agents then finally after 2 hrs got what I wanted by talking to supervisor and she had them send me a new gateway. but after I got the new gateway, I set it up and had the same issue (so I guess it was not the equipment afterall).
    I did everystep the tech support people had done in the days past and still no connection. If you have had this trouble as well, let me save you the headache of hours on the phone w/ tech support people who are dumber than dirt(i spent a total of over 10hrs in 3 days on phone w/ various TS agents).
    If your actiontec gateway has been messed w/ in anyform or fashion, and connects wireless (or wired) just fine to other devices(PC Wii etc) w/o any modification to gateway, try this:
     RESET the gateway to factory settings(press the little red button on the back of the gateway w/ a pen or small object.
     after all the lights have come back on, go to the gateway site to modify it (enter 192.168.1.1    then hit enter) username is admin and password is password, by default.
    Go to Security, click on DMZ Hosting, click" on" and make sure it is for Xbox 360 not for your PC under DMZ Host PC Name
    Run a "Test live connection"? on xbox360 and it should connect to Xbox Live

    So glad to hear that I could help. No one should have to deal with all the stress and frustration that I had to endure just to get their xbox to connect. Its so incredibly frustrating to find out at the end that It is such an easy fix.

  • Has anyone tried to connect their xbox?

    Has anyone tired to connect their xbox using the wireless Networking Adapter? Every time I try, it tells me that it is not connected. Anyone have any suggestions?

    I believe there is no issue connecting the Xbox 360 via Wired Ethernet (either an ethernet cable directly from Xbox 360 to TC, or via a wired Ethernet bridge). The problem is, as you said, when trying to connect wirelessly via the Xbox 360 Wireless USB adaptor.
    Did Apple say anything more about the fix? Timescales? I'm itching to get a Time Capsule, but not until this issue is fixed.
    Also, if I set the TC to 802.11n with backwards compatibilty (forget the exact option), will this slow the entire network down if I have a mixture of 802.11n and 802.11g devices connecting to it? I read somewhere that it will only slow the network down whilst the actual devices in question are transmitting. Is this correct?

  • Bridging from wireless iBook connection to xbox 360

    I was wondering if anyone might have any advice for me.
    I am currently trying to allow my xbox 360 to share my iBook's wireless by bridging it through the iBook's ethernet jack.
    When running the xbox live set up I have been able to get the IP address confirmed, the DNS as well, however the MTU just fails.
    My iBook is set at 1500, the minimum the xbox wants is 1364, my wireless router is set at 1500. Any ideas? Has anyone else experienced this?

    Tweleveclicks2,
    Welcome to Apple Discussions
    I don't own an Xbox so I can't really help you out. Have you looked at this Connect360? You should look at this previous post.
    Jon
    Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more...  Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

  • I am trying to get my Xbox 360 controller to work on my Mac.

    I am trying to get my Xbox 360 controller to work on my Mac. I have installed the suggested driver and the program ControllerMate. The Mac sees the controller because it shows up and responds. The program ControllerMate also sees the controller and responds appropriately, but the game (Minecraft) doesn't. HAs anyone else cracked this nut or have advice?

    Try using the resetting SMC procedure
    http://support.apple.com/kb/HT3964
    You may have done something similar already, but do it precisely as described.  You should disconnect ALL peripheral devices, except for Apple keyboard and mouse.
    Also, when you plug it back in, if the iMac is currently plugged into an old (or overcrowded) power strip (surge suppressor), try connecting it directly to a wall outlet by itself. 

  • How do I connect my Xbox 360 to my iMac

    I want to use my imac as a TV so i want to know how to connect the xbox 360 to my imac.
    Thank you for your support

    What iMac model do you have ?
    The 2011 ThunderBolt iMacs only work with other ThunderBolt Macs Thunderbolt 10.6 Help: Using another Mac as an external display
    For the 2009 and 2010 27" iMacs with Mini DisplayPort you would need something like the Kanex XD http://www.kanexlive.com/xd
    The Kanex XD is not compatible with ThunderBolt iMacs.
    Stefan

  • Connecting my xbox 360 (elite) to my macbook pro?

    I recently got a Macbook pro for christmas, and was wondering if there was anyway that I could connect my xbox 360 elite to it. I want to use the my macbook screen as a screen for my 360, at least until I can afford a new TV (roommate knocked my 32" samsung off its stand and broke it christmas day...).
    I heard there is a VGA coord from microsoft that connects from a vga port to the back of the xbox, and i have the DVI to VGA adapter for the mac already. Was just making sure this works before I spend the $50.
    Thanks!

    Broschati,
    No, this won't work. The DVI port on your Macbook Pro is for video out. The Macbook Pro's display is connected directly to the GPU, and there is no way to input video to it.
    Scott

  • I've been trying to connect iphone to mac but the mac does'nt reponed

    i've been trying to connect iphone to mac but the mac dose not respond. i upgraded to snow leopard how do i fix the porblem with my mac

    Hi,
    You may also refer to the help document below:
    Creative Cloud Connection Update
    Regards,
    Sheena

  • Qosmio G20 VGA in for connecting to XBox 360

    How can i connect a Xbox 360 to the qosmio using a VGA HD cable like this?
    http://www.xbox.com/en-US/hardware/x/xbox360vgahdcable/
    Is it possible to use the fantastic monitor of the Qosmio to play?
    Any help apreciated

    Mores is right, there is no VGA input on the Qosmio G20 (I wish there was though), you have to use an S-Video connection from your Xbox. Using the Qosmio player works perfectly well, there's no delay at all, the only problem I had was the video quality was utterly terrible. S-Video out from my 360 to a TV was fine, but input into the laptop looked awful, oh well!
    Cheers,
    Steve

  • Router Wont connect my Xbox 360

    Hey, I have a Cisco E2000 and I have multiple devises that work but not my xbox 360.
    I have
    2 computers
    2 iphone 4s 
    2 ipods
    iphone 3gs
    They all connect to the internet fine. My Xbox 360 never connected.
    the xbox can connect to the router. Then the router cannot connect to the internet.
    Please help me!

    You mentioned that the xbox can connect to the router. Is it connected wirelessly to the network or wired to the router? What excatly do you mean it won't connect? You are unable to connect to the network or to the internet? Is your concern with NAT? If it is already connected to the network then there is no problem with the router (as what you have posted other devices are working, it shows that router is working fine). You might need to forward ports in order for you to use or connect to xbox live. And if it still won't work with the router, connect your xbox directly to the modem and test your connection. If still not working, contact your service provider. But try the ports first.
    You may check the link below:
    Error: Your NAT type is set to strict (or moderate)

Maybe you are looking for

  • How to save website when the css is overwritten with stylish or greasemonkey

    I used firefox version 3.6 for a long time. Now, with the newer versions, I find I miss one very important feature. It may be a bug, it may be something I'm doing wrong. Whatever the case may be, I now cannot save websites with the custom stylesheet

  • Sounds problem on my intel iMac

    I have just receive my new speakers (uCubes by UltraLink) and I have a little problem... The sounds play very well on my bootcamp part but when I go to my OS X (Lion), I put the volume on max and it play like the halft of the maximum bootcamp (window

  • File Download Dialog Box

    Hi, I am creating a site using struts framework. In that one I code one "Download" hyperlink. Which should download Excel file to the client site. For this I want the Windows File Download Dialog Box to pop up when the user presses the "Download" hyp

  • Enum and switches

    I have an enum (MessageType) but I am not sure how to read it on the server end. Right now I have this statement: in = clientSocket.getInputStream(); switch(in.read()) case MessageType.LOGIN:  System.out.println("Login"); break; }But this does not wo

  • IPhone 5 error 21 in iTunes when updating?!

    I am stuck in error 21 when (update and recover) with iTunes. I tried the DFU mode but while restoring after extracting and verifying with apple store it enters Recovery Mode and the Error came up ! What should I do?! I can't open my iPhone and I can