Hi, Can Anyone tell me the pattern of SAP SD certification for year 2011 ?

Hi,
Please help me in knowing the following:
1) Is there any negative marking for wrong answers, If YES how much % is it?
2) EXAM Pattern i.e No of Questions Approximately given in EXAM.
3) What is the PASS percentage of EXAM ?
Thanks in advance.
Venkat

Dear Venkat,
There is no negative marking in the certification exam.
There should be around 80-90 questions which would be divided into different sections e.g. Sales, Billing, Shipping, Master Data, Solution Manager etc.
The questions asked will be optional and true false.
You need 70% to pass the exam otherwise you will be disqualified.
Regards,
Ashu

Similar Messages

  • Can anyone tell me the Map Ipad app is available for imac yet. if so where can i download it or is it already on my mac somewhere?

    Hi
    Can anyone tell me if the Maps App is available for Imac yet and if so how do i find it?

    The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    https://sites.google.com/site/emanuelet/

  • I have a MacBook Pro 17 inch and I just destroyed the screen.  Can anyone tell me the keystrokes to turn on the external display as primary?

    I have a 17-inch MacBook Pro with a destroyed screen.  (My son put it on the top of his car and drove off and it fell off.)  Can anyone tell me the keystrokes to make an external monitor the primary monitor?  I can see only the upper left side of the laptop screen so I CAN select system preferences.  I can then arrow over to system preferences and down to make selections I cannot see.  I don't know then what to do or IF I can make the choices needed to make the external monitor primary when all I can do is make keystrokes on items I cannot see.  It's an older (about 2008) MacBook Pro and I would like to use the external monitor to see to connect an external hard drive and download files to install on a new MacBook.  My son might know the iOS but I don't.

    • I don't know then what to do or IF I can make the choices needed to make the external monitor primary
    This is the left side of System Preferences in OS 10.8.3. (if that is not what the MBP is running post back). By the way, if you can grab the top of that pane you could move it over to the top far left. - Same for any pane.
    Do this with the external monitor connected and powered on.
    You need to click on Displays., and then grope for Arrangement and click there.
    When you get there, the two screens are shown.
    The trick is to grab the white stripe (on the left in this image) and move it to the other rectangle. You do not have to position it exactly, it snaps into place when it gets close.

  • I bought a MacBook Air and wish to connect with old iMac 2003-5. The screen on the iMac is black. Can anyone tell me the cable I need to do this please. I have music and photos on the iMac I cannot access. Many thanks. Jax

    I bought a MacBook Air and wish to communicate with old iMac G5 2003-5 (sorry can't remember the year). The screen on the iMac is blank and will not come on but the hard drive still works. Can anyone tell me the cable I need to with the iMac & how to do it. I have music and photos on the iMac I cannot access.
    Also, do I need to special CD/DVD external drive/burner to import music CD's into iTunes? I have tried and it keeps coming up with formatting problems.
    Many thanks. Jax

    dwb
    I have looked for what you said and come up with these 2 cables. Are these the correct ones I need?
    http://store.apple.com/us/product/HA833ZM/A/belkin-firewire-800400-9-pin6-pin-ca ble-2-m66-ft?fnode=51&fs=s%3DpriceLH
    http://www.tekserve.com/store/networking-cables-adapters/cables-adapters/apple-t hunderbolt-to-firewire-adapter.html
    Many tx again.
    JAx

  • Can anyone tell me the field name, table name for the following scenario?

    Hi All,
    Can anyone tell me the field name and the respective table name for the following scenario's?
    1. A report to list all the materials to which Invoice is done and delivery is pending.
    2. A report for Order tracking.
    3. A report, which gives PO(Purchase Order),  Pricing details.
    4. A report, which calculates the MATERIAL COST. It will select all the material issued for the entered service order number from  stock.
    Thanks & Regards,
    P.Gowrishanker
    Edited by: Gowrishanker pari on Jun 1, 2008 8:58 AM

    I believe that OmniVision Technologies has the contract for the 3gs.

  • Can anyone tell me how they are handling software distribution for the iPad in an enterprise environment?

    Can anyone tell me how they are handling software distribution for the iPad in an enterprise environment?

    The new Business Volume Purchase Program is pretty interesting...it can be used to centrally purchase and distribute paid ( not free) items from the AppStore.  We are getting setup to use it.  You can keep an eye on licenses etc.  You can also use a single centralized form of payment. 
    http://www.apple.com/business/vpp/

  • Can anyone tell me the naming conventions for PSa tables

    hi all,
    After the data is loaded into the psa. how to look at the records that are there in psa. And can anyone tell me the naming conventions for psa tables.
    like BIC/????
    thanxs in advance
    regds
    hari

    Hi Hari,
    You want to know the naming convention of PSA table. For that there is a simple technique try this.
    Go to - T code SE11
    In the database table check box give  /BI*  and click search
    next window  in the Description Text box give the r data source name(master)  like
    YIO_ID_ATTR which is assigned to infosource. then click OK.
    then you get the psa table structure.
    You can take structure and check in the T code SE 11
    Hope this is fine.
    Regards
    Sreekanth

  • Can anyone tell me where to find an install guide for the Liveoffice app.

    Can anyone tell me where to find an install guide for the Liveoffice app.
    Thanks
    Jeff

    Hi Jeff,
    You can download the install guide for Liveoffice application from the link provided below,
    http://help.sap.com/businessobject/product_guides/boexi/en/boXI_LiveOfficeInstall_en.pdf
    Hope this helps you.
    Regards,
    Abhijeet T.

  • I have migrated from London to New Delhi and i am facing some problem with my iPhone 4s and i am not able to setup a repair .My phone is in under warranty too. Can anyone tell whats the matter?

    I have migrated from London to New Delhi and i am facing some problem with my iPhone 4s and i am not able to setup a repair .My phone is in under warranty too. Can anyone tell whats the matter?

    The warranty is NOT international. You must take it back to the country of origin if it needs repair. The E.U. is considered a single country for warranty purposes.

  • Can anyone tell me the launch date for Apple ipad mini cellular in India...

    Can anyone tell me the launch date for Apple ipad mini cellular in India...

    I want Apple ipad mini Cellular in india. what should i do.
    I am buying apple product for fist time.

  • Can anyone tell me the flow of BDC program?

    Hi
    Can anyone tell me the flow of BDC program and also what is the significance of each step?
    Thanks
    Gagan

    Not sure what you are asking here.  A BDC program is a recording over an SAP transaction.  The flow is determined by the screen sequence of the transaction which is being recorded. 
    What you do is fill an internal table with screen numbers and fields with values and fcodes.  Then call the transaction using the internal table.
    For example, the following program calls PA30 and enters a time event.
    report zrich_0001
           no standard page heading.
    parameters: p_pernr type pa0002-pernr,
                p_plans type t528b-plans.
    data: mode type c value 'N'.
    data:   bdcdata type table of bdcdata    with header line.
    data:   messtab type table of bdcmsgcoll with header line.
    start-of-selection.
      perform do_transaction using 'P10'
                             p_pernr
                             p_plans.
    *       FORM do_transaction                                            *
    form do_transaction using timev
                              pernr
                              plans.
      data: bdcdate(10) type c,
            bdctime(8) type c.
      call function 'CONVERT_DATE_TO_EXTERNAL'
           exporting
                date_internal = sy-datum
           importing
                date_external = bdcdate.
      write sy-uzeit to bdctime.
      clear bdcdata.  refresh bdcdata.
      clear messtab.  refresh messtab.
      perform bdc_dynpro      using 'SAPMP50A' '1000'.
      perform bdc_field       using 'BDC_OKCODE'
                                    '=INS'.
      perform bdc_field       using 'RP50G-PERNR'
                              pernr.
      perform bdc_field       using 'RP50G-TIMR6'
                                    'X'.
      perform bdc_field       using 'BDC_CURSOR'
                                    'RP50G-CHOIC'.
      perform bdc_field       using 'RP50G-CHOIC'
                              '2011'.
      perform bdc_dynpro      using 'MP200000' '2500'.
      perform bdc_field       using 'BDC_CURSOR'
                                    'T705H-GTEXT'.
      perform bdc_field       using 'BDC_OKCODE'
                                    '=DIFP'.
      perform bdc_field       using 'P2011-LDATE'
                              bdcdate.
      perform bdc_field       using 'P2011-LTIME'
                              bdctime.
      perform bdc_field       using 'P2011-SATZA'
                              timev.
      if timev = 'P10'.
        perform bdc_dynpro      using 'MP200000' '2221'.
        perform bdc_field       using 'BDC_CURSOR'
                                      'P2APL-PLANS'.
        perform bdc_field       using 'BDC_OKCODE'
                                      '=DOIT'.
        perform bdc_field       using 'P2APL-OTYPE'
                                'A'.
        perform bdc_field       using 'P2APL-PLANS'
                                plans.
        perform bdc_field       using 'P2APL-WAERS'
                                'USD'.
      endif.
      perform bdc_dynpro      using 'MP200000' '2500'.
      perform bdc_field       using 'BDC_CURSOR'
                                    'P2011-LDATE'.
      perform bdc_field       using 'BDC_OKCODE'
                                    '=UPD'.
      call transaction 'PA30' using bdcdata
                                    mode mode
                                    messages into messtab.
    * If error occurs, give message and come out.
      if sy-subrc <> 0.
      endif.
      clear bdcdata.  refresh bdcdata.
      clear messtab.  refresh messtab.
    endform.
    *       bdc_dynpro
    form bdc_dynpro using program dynpro.
      clear bdcdata.
      bdcdata-program  = program.
      bdcdata-dynpro   = dynpro.
      bdcdata-dynbegin = 'X'.
      append bdcdata.
    endform.
    *        bdc_field
    form bdc_field using fnam fval.
      clear bdcdata.
      bdcdata-fnam = fnam.
      bdcdata-fval = fval.
      append bdcdata.
    endform.
    Regards,
    Rich Heilman

  • Can anyone tell me the class diagrams of a simple java notepad

    hi,
    Can anyone tell me the class diagrams of a simple java notepad.
    i'm a very beginner in UML.
    thanks in advance.
    Moazzam

    Don't worry too much about that. Figure out what it needs to do. Then grab JUnit and start writing tests & code.
    On xprogramming.com there is a series of articles developing a notepad type app in C#. That might be of some help.
    Dave

  • Can anyone tell me the senarios in which database crashes

    hi
    can anyone tell me the senarios in which database crashes other then backup recovery concepts.when the databse goes live
    regards,
    swapna.s

    Those sort of errors would mostly be TNS errors when the database server runs out of memory (memory configured for Oracle, swapping, number of network connections limit) etc...
    Other than that, if the application is written badly (which I hope is not the case), then users may face deadlock situations but those would be handled by Oracle automatically.
    Of course, these errors can be handled by properly tuning the database or the application.

  • Can anyone tell me the syntax for sendkeys

    Can anyone tell me the syntax for sendkeys-sbo_application.SendKeys("+()") is
    not working

    Hi,
    Have you seen the folowing messages?
    Re: Tab key and lookup table
    Sendkeys("+({TAB})")
    Hope it helps
    Trinidad.

  • Can anyone tell me the iPad customer support hotline phone number I have 133622 but no connection thanks

    Can anyone tell me the AppleCare phone number for wa I have tried 133 622  but no response
    Thanks

    http://support.apple.com/kb/HE57
     Cheers, Tom

Maybe you are looking for

  • Hp officejet scanner is not recognized after upgrading to snow leopard

    I tried calling HP twice and was disconnected both time before speaking to someone. The printer works, just the scanner will not work no matter what I do. Any ideas?

  • Two a/c doc generated during MIRO

    Dear All, During MIRO transaction two accounting documents are generating with different posting dates for some invoices. One accounting doc is generating correctly while in other accounting doc small amount is posted to consumption account and stock

  • Transaction Canceled CU 013 ( )

    Hi System Details ============ R/3 4.7 Enterprise Extn set 110 Oracle 10G Sun Solaris 5.9 Kernel 247 Non Unicode Issue ==== I get the below following error in sm21 for every thirty minutes. I checked the background job. No background jobs have failed

  • Do we need to stop DPM backups when updating SP2013 with CU

    Hi - planning to install the Dec14 CU and want to know if it is required to Stop DPM protection when running PSConfig? Our DPM guy says DPM protection cannot be paused - only stopped and this would remove the Protection group completely and we would

  • Websphere 3.5.4 don't support OracelCallSatement !!!!

    Do the connection in connection pools support OracleCallableStatement? (OracleCallableStatement)conn.prepareCall(plSQL) note: conn is the connection got from websphere 3.5.4--connection pool please help. thanks.