Hi, can I use my G4 as an external HD connected in anyway?

Hi,  Hope you can help me in this....
Can I use my G4 as an external HD connected in anyway to my imac (intel) but in a way that I can see all the HD's that are in the G4?
Similar to a Raid that it lets you see more than one HD at a time.
Also if I have many HDD enclousures how can I connect them to the same port in my imac to have them working in series from each other ?
Do I need to change any of the HD settings? to what? I have 2 SATA 1TB HD, and many more IDE of different memory storage quantity.
Do I need to change anything on the IDE's?
Thank you for your help in advanced....
G

Yes and no.  PowerMacs are formatted differently in terms of booting.   So as a repository for data, they can act as that, but not to boot both Intel Mac and PowerPC Mac from the same partition.  If you manage to make one partition GUID, while the other Apple Partition Map, the latter will boot the PowerPC, while the former will boot the Intel. While booted off the PowerPC, it can't see the contents of the Intel though. Target Disk Mode, which means holding the T key down on the QuickSilver at boot, and then hooking it up to the Intel Mac via Firewire is how you will enable the QuickSilver to appear as an external drive.  Note, I don't think that Target Disk Mode will show all internal drives.  It may only show the boot drive, or any on the logic board's  built-in Parallel ATA bus.  It is unlikely it will see any SATA drives on a PCI card, but it can't hurt to try.

Similar Messages

  • I am trying to get an answer to whether or not I can successfully use Time Machine with an external HDD connected to an airport extreme?  Some forums say yes, some say no.

    I am trying to get an answer to whether or not I can successfuly use Time Machine with an external HDD connected to an airport extreme.  Some forums say yes, some say no.  I'm also curious about formatting the hard drive to work both on my wife's MacBook Pro and my PC.  Any help would definitely be appreciated.

    You may be going on a recollection, that I share, that at one time Apple stated this would be possible:
    In fact, Apple’s Time Machine Web page touted this very capability as recently as last Tuesday, as you can see from Google’s October 16 cache of the page
    Effortless meets wireless. With a hard disk connected to your AirPort Extreme Base Station, all the Macs in your house can use Time Machine to back up wirelessly. Simply select your AirPort Disk as the backup disk for each computer and the whole family can enjoy the benefits of Time Machine.
    But if you look at the current Time Machine page on Apple’s Web site, that text is nowhere to be found.
    That was a long time ago, it has never been officially implemented, and at present they specifically say it cannot be done.
    In summary, it may work, but probably won't, and even if it does it may not be reliable.
    Reference:
    Disks that can be used with Time Machine
    Time Machine can’t back up to an external disk connected to an AirPort Extreme, or...
    and
    Mac OS X v10.5: Time Machine doesn't back up to AirPort Extreme AirPort Disks

  • Can't use voice/video functionality with external domain connected users through federation

    Hello All,
    Hope you keeping well..!!
    We are communicating with external customers lync server through federation option setup on our corporate lync server.  We have received the federation setting from the customer with SIP address which has been setup on our corporate lync servers after
    that we were able to browse the customer contact through corporate lync account.
    We were also able to chat with external customer but however voice/video functionality are not working through same session.  Whenever we try to dial out external customer lync account it ended with error message "call ended due to network issue".
    We have checked the setting from corporate lync servers and network point of view but doesn't find any issue which cause the disconnection to voice/video over lync.  Could you pl help or guide with the way to resolve the issue.
    Thanks, MK

    Thanks for your reply.<o:p></o:p>
    Audio/Video works fine within corporate when dial any lync contact.  We only have issue while trying to use the same functionality with any other
    external lync contact configured over federation option.<o:p></o:p>
    We already checked the security rules and all required ports are open, as confirmed by local resolver group.<o:p></o:p>
    We have checked with external parties and according to them their systems are hosted by Microsoft as part of office 365 suite and they already have
    federation option for 17 different customers which works fine.  Which means issue must be your local end.<o:p></o:p>
    Is there any tool available to identify the issue from client end?<o:p></o:p>
    Also I have a question here....In my corporate environment...client is sitting in India and lync servers are hosted in UK and users connect to it
    over MPLS route.  In Client lync configuration we have  internal/external servers configured .....so when i tried to make a voice call with external lync users then I see from netstat -a command that traffic hitting to multiple public IP addresses
    directly from my machine..<o:p></o:p>
    Does it mean that client required internet connectivity with specific open media ports to connect with external parties for video/voice? or in ideal
    case all request should handle by corporate internal server which should took UK internet path to connect with external lync contact?
    Thanks, MK

  • I have an apple id but ı can not use it for sign in to itunes connect account while publishing my ibook document. Why ı can not login? What can ı do to figure out this problem?

    I have an apple id but ı can not use it for sign in to itunes connect account while publishing my ibook document. Why ı can not login? What can ı do to figure out this problem?

    As note already on the iBA forum [ AppleID for ibooks publishing ], you need two IDs. You can't use your developer ID.
    If you already signed up for books with that ID, you need to talk to Apple to straighten things out.

  • Can i use exfat format for my external western digital harddrive so that i can use in both windows and mac?

    can i use exfat format for my external western digital harddrive so that i can use in both windows and mac?
    thanks in advance.
    <Email Edited by Host>

    Yes you can. OS X version 10.6.6 and later can read/write exFAT. Windows XP SP3 and later can read/write exFAT. As posted by Radiation Mac, you can do it from Windows or from OS X.
    However, I've noticed Windows to be somewhat picky about drives formatted on a Mac. So, if Windows can't read it, try formatting it on the Windows machine, and see how it works on the Mac.
    Posting your email on a public forum isn't a very good idea. It will likely be harvested by spambots and used as the reply-to address for spam it sends out.
    Also, most people are not going to send an email to you for similar reasons. Nobody knows who you are, so sending an email to you could be giving a spammer a valid email address.
    The forum is set up to automatically notify you when there are responses to your questions. When you get one, you would log back into this forum and check to see what the answer was.

  • HT204023 can i use a hotspot on my iphone to connect a kindle fire to my cellular internet?

    Can I use a hotspot on my iphone to connect to a kindle fire on my cellular internet?

    Yes

  • Can I use the optical digital audio cable to connect INSTEAD of the hdmi?  My tv only has 2 hdmi ports, and they're both taken

    Can I use the optical digital audio cable to connect INSTEAD of the hdmi?  My tv only has 2 hdmi ports, and they're both taken

    I'm afraid that's very misleading and inaccurate.
    Firstly an adapter won't work, it would need to be a converter and then if it's a compliant converter it won't let you watch HDCP protected content such as that from netflix or from the iTunes Store.
    Secondly, whilst I'm not going to debate whether component or HDMI is better, component is certainly not better if it's been converted from an HDMI signal. You can't make anything better by simply converting it to another type of signal.

  • Can i use my ipad2 as inertnet device for connect my desktop

    Can i use my ipad2 as inertnet device for connect my desktop

    No, the iPad doesn't have the personal hotspot function and can't share its connection with other devices - that is currently only found on the iPhone

  • Can I use extension cord of macbook air and connect it to iPad charger

    Can I use extension cord of macbook air and connect it to iPad charger?

    If you mean slide off the nubby plug and use the long cord instead? Then yes.

  • Can i use time capsule as a external hard drive

    can i use time capsule as a external hard drive

    Not plugged in by USB if that is what you were thinking.
    You can store files on the TC but you should NOT.
    Store files on the TC.
    This is asked several times a day.. obviously people are struggling with their latest SSD being too small.
    The TC is not suitable for network file server.. but many people having no choice press it into service as such.
    Major issues.
    1. No backup.. no way Time Machine can backup a network drive. No place to backup to.. So all your files will be at risk. And you will need to buy a third party like CCC to do backup.
    2. The TC cannot be partitioned and mixing TM backups and data is not great. It was and is and ever shall be a backup device for Time Machine.
    3. The drive is slow to spin up and quick to spin down.. there is no control. In fact the TC is so lacking in controls for even the router side.. that you cannot do more than the most basic of setups.
    The following are controls on the hard disk side.
    Reformat it. You can name the share. You can do a full archive of the whole disk. This will go at a speed of aprox. 30-50GB/Hr so calculate how long an archive of a full 2TB will take.
    4. iPhoto in particular can easily corrupt its entire library with wireless networking causing a disconnection to one photo. Even if you do this;;; do not move your photo library... you have been warned!!
              Even apple btw say don’t do it.
    http://support.apple.com/kb/TS5168 Although mostly about FAT32           it adds network drives.
    5. iTunes can constantly lose connection to the library. The disk is slow to respond.. itunes on the computer will constantly spit out errors. Even in the midst of streaming the TC can spin down the disk due to caching.
    6. Do not use any live files on the TC no matter what else you do.. if you edit files in whatever program the file must be on the local hard disk.
    7. The only suitable location for most libraries is a computer. You can plug in an external hard disk.
    Read pondini for some work arounds.
    Q3 here. http://pondini.org/TM/Time_Capsule.html

  • Can I use bluetooth on my macbook air to connect to my apple TV

    Can I use bluetooth on my macbook air to connect to my apple TV

    No.
    For more info:
    http://support.apple.com/kb/ht5404

  • Can i use an ipad as an external moniter for a mac or pc? if so, then how?

    can i use an ipad as an external moniter for a mac or pc? if so, then how?

    Or you can use home sharing for free, but it will only allow you to play movies and music from itunes.
    Or you can use any remote desktop software
    https://www.google.com/webhp?hl=en&tab=ww#hl=en&safe=off&output=search&sclient=p sy-ab&q=remote+desktop+apps+from+itunes&oq=remote+desktop+apps+from+itunes&gs_l= hp.3...2689.2689.1.3799.1.1.0.0.0.0.105.105.0j1.1.0.les%3B..0.0...1c.1j2.siVpuwV plPU&bav=on.2,or.r_gc.r_pw.r_qf.&fp=29f1d2d1223cbee7&biw=1280&bih=636

  • Can I use my macbook as a external harddrive to copy files to my imac

    can I use my macbook as a external harddrive to copy files to my imac

    Yup it's called Target Disk Mode. Click the link and follow the instructions.

  • Have a 802.11n time capsule, the range of the wireless network has shrunk down to nothing over last few days. Used to be able to use wireless network anywhere in house, but now can only use in my office. Will not connect to iphones, ipad, itouch, or noteb

    Have a 802.11n time capsule, the range of the wireless network has shrunk down to nothing over last few days. Used to be able to use wireless network anywhere in house, but now can only use in my office. Will not connect to iphones, ipad, itouch, or notebook. Worked fine last week, but over weekend just started having issues.

    It is very possible that you may have some form of Wi-Fi interference that has appeared recently that is preventing your Time Capsule (TC) from providing a clean RF signal.
    I suggest you perform a simple site survey, using utilities like iStumbler, or AirRadar to determine potential areas of interference, and then, try to either eliminate or significantly reduce them where possible. Look for other Wi-Fis that may be operating nearby. Note those with the strongest signals and which channels they are operating on ... then change the channel used by the TC to be at least 3-5 channels away.

  • Can i use airplay if my apple tv is connected to the network by ethernet cable?

    Can I use Airplay  if my Apple tv is connected to the network using an Ethernet cable as apposed to a WiFi connection.

    Thanks. I therefore have a problem as I cannot connect my ipad to the Apple TV. When trying to connect via Airplay my other apple tv appears (that is connected only via WiFi and that connects OK) but the Apple tv connected via the Ethernet does not show. I have looked at all the settings on both apple TV's and the only difference I can see is one is connected via WiFi and the other through Ethernet cable. Any ideas on what I need to check out?

Maybe you are looking for

  • How to mount an url with variable data?

    Hello fellas, i need to use a variable url in an a tag to send emails. Something like: <a href="exemple.com?guest=Name%20Of%20My%20Guest"> Anyone knows how i can encodeURI of an variable data in Eloqua??? Thanks for attention. Respect!

  • APEX Error - ORA-06502

    Hello: I'm in Object Browser in APEX. For all my tables when I try to view the table structure, the following error message appears: report error: ORA-06502: PL/SQL: numeric or value error: NULL index table key value Yet, when I click on the Data tab

  • MDT 2012 measuring amount and deployment time

    I'm on beginning of MDT's Adventure. For our Client we have to prepare in a monthly basis image load reports that contain amount of images deployed in requested period of time with information how many each OS installation took time. If it's possible

  • Oracle.sysman.emsdk.util.jdk.EMException

    I had Oracle infrastructure and Application Server installed on a sun box. I tried to start the infrastructure and application servers. During the process of starting the infrastructure, I am successful with starting the listner, starting up the infr

  • My Premiere CS3 crashes when I am exporting anything.

    Premiere CS3 crashes on my HD project Most of the video i am working with is from the new 5D   The files are as I recorded them on the camera there have been no conversion done to them. when ever I try to export anything out of premiere it crashes an