Hi can NE one tell me hwo to open an external file with it's defualt viewer

hi can NE one tell me hwo to open an external file with it's defualt viewer
e.g. open a .mdb file in access or a .txt file in notepad
thnx
help would be much apreciated

hello can NE one help me?????

Similar Messages

Please please can some one tell me how do you charge ur ipad with ur laptop. it doesn't chage wen I put use the wire. only charges when I plug the socket in.

please please can some one tell me how do you charge ur ipad with ur laptop. it doesn't chage wen I put use the wire. only charges when I plug the socket in. Iv never used an ipad b4 so don't really know much. Hope some one knowz.

The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Can any one tell me how to write the properites files and how to acces

can any one tell me how to write the properites files and how to acces thoose files
plz let me no
thanks in advance

http://www.exampledepot.com/egs/java.util/Props.html

Can any one tell me how to attach a pdf file to the mail through workflow

I have a smart which i am able to convert it to a pdf file...now.. can any one tell me how to attach a pdf file to the mail through workflow

Hi,
To create the task for attachment
Use the BOR SELFITEM and method NOTES_APPEND.
The out come of this task contain a link called attachment with a clip attached. Clisk on that icon and choose the type of attachment u want . RAW , EXCEL , TXT , PDF... Then using the import icon u can attach the document u like.
But the TYPE : OBJ.
Similarly using NOTE_DISPLAY method u can display the documents u like.
In any work item u have the facility to attach any atttchment for further circulation .
Attchment @ WORKITEM
1.Click the workitem for which you want to create the attchment
2.Press create attachment
3. Add the attachment u like (PDF)
Reward points for useful answer.
Richard A

Can any one tell me how can I move to a different folder pictures, that I've cloned, without them staying aggregated? They all come together to the other folder and I don't want that- thanks

Can any one tell me how can I move to a different folder pictures, that I've cloned, without them staying aggregated? They all come together to the other folder and I don't want that… thanks

There's more to it than that.
Folders in Aperture do not hold Images. They hold Projects and Albums. You cannot put an Image in a Folder without putting it in a Project or an Album inside that Folder.
The relationship between Projects and Images is special: every Image must in a Project, and can be in only one Project.
Images can be in as many Albums you want. Putting an Image in an Album does not move it from the Project that holds it.
You can make as many Versions from a Master as you want.
What you want to do may appear simple to you, but it still much adhere to how Aperture works. I still can't tell exactly what you are trying to do (specifically: Images don't live in Folders; moving an Image from a Folder is non-sensical).
It can be very confusing (and frustrating) to get going with Aperture -- but it does work, and can be enormously helpful. If you haven't, take a look at the video tutorials on Apple's Aperture support site.
I feel as though I haven't helped you much -- but we need to be using the same names for interface items in order to get anything done -- and my sense is that you still haven't learned the names of the parts.

Can some one tell me a better way...

Hi All..
I work on a web application. I create user ids for people logging into my application. here I have a small problem.. This is what I am currently doing...
When I create a new user, I assign a new user id to the user and store all hi info.
All our user ids are stored in User_ID table and user info in User_Info table.
First I get the max user id from the User_Id table.
int iuserid = select max(User_ID) from User_ID;
Then I add ' 1 ' to this and assign it to new user.
iuserid = iuserid+1;
insert into User_id values(iuserid, <ssn> );
Then I store all user info in User_info table..
insert into User_info(iuserid, <first_name>, <last_name>,...);
Both these SQLs are executed as a transaction.
The problem that I have...
It works fine in a normal environment and in my testing.
But when the load inceases, before I insert into the User_info, another user tries to get the max User_id from User_ID table, then it conflicts..
I have seen occurences of User_Info storing the info of a different user against the User_id when many people are accessing the app at the same time.
Can some one tell me a better way to handle this scenario..
Appreciate all you help..
TIA..
CK

Hi,
assuming that the requirement for user_id is only for uniqueness (primary key requirement) not continuosly.
perhaps can try this,
1) create a table to keep the max id for each table's key.
e.g.
create table key_id_lookup
key_name char(n),
current_value number(m)
where n & m is the size of the field
2) for each creation of entry in the user_id table, lookup the value in the key_id_table and increment it after retrieval.
e.g. current_id = select current_value from key_id_lookup where key_name = 'user_id_key';
current_id+=1;
update key_id_lookup set current_value = current_id where key_name = 'user_id_key';
something similar to use of sequence if your database support it.
3) continue with the creation of record in other tables. now obtain the time stamp of creation and append with the current_id obtained. e.g. timestamp = 132456872; size of m is 5, user_id = 132456872 x 100000 + current_id;
this should give you a unique key at creation time.
There should be other better ways of resolving this(like locking the table for the update operation but affect performance, etc), depending on the feature supported by the database in use.
Hope this can help as last resort if other options not available.

I have a targus 4.0 bluetooth usb adapter and so i can pair my iphone 4s and ipad air wirelessly, it seems to pair ok but when i try to connect i get a error message or not compatible. can some one tell me if it i can use this

i have a targus 4.0 bluetooth usb adapter and so i can pair my iphone 4s and ipad air wirelessly, it seems to pair ok but when i try to connect i get a error message or not compatible. can some one tell me if it i can use this bluetooth with my devices, thanks

sos1der wrote:
pairing the apple equipment is not a big deal just wanted to add songs from itunes wirelessly.
You can only add songs to your iOS device from iTunes via Wi-Fi sync or via your cable, not Bluetooth.
sos1der wrote:
but i tried paring my LG bluetooth so i can listen to music on my computer wirelessly buy it gives me the same error message
That's an entirely different issue, unrelated to your iOS devices.

I need to pass value for Actual GI date field in VL01N t code, I am using BAPI_DELIVERYPROCESSING_EXEC. can any one tell me how can i pass vaule ?

I need to pass value for Actual GI date field in VL01N t code, I am using BAPI_DELIVERYPROCESSING_EXEC. can any one tell me how can i pass vaule ?

Hi Abdul,
Sorry for my unprecise answer, but you talk about a tcode, but you're using a BAPI Call. Maybe you want to call the transaction in batch mode?
http://help.sap.com/saphelp_erp60_sp/helpdata/de/fa/09715a543b11d1898e0000e8322d00/content.htm
Regards,
Franz

Can any one tell me when i use adobe flash media encoder how can i see my live vidoes on flash media

can any one tell me when i use adobe flash media encoder how can i see my live vidoes on flash media server . thnx

Flash Player version 10.1.102.64 is the last version available to PPC Mac users. However, this Flash version won't work for many videos on Facebook, YouTube and other sites. Adobe's latest version, 10.2.x or later, is only for Intel Macs. Adobe will not provide a newer Flash version for PPC Macs.
The message requesting that you download Adobe Flash Player takes you to Flash Player requiring an Intel processor. Doesn't work on a PowerPC processor. I found a hack, installed it & it works with Firefox, TenFourFox & Safari.
Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
Hack Allows PowerPC Macs to Access Flash 11 Content
http://lowendmac.com/ed/royal/12sr/flash-11-and-powerpc.html
 Cheers, Tom

Can any one tell me how to use EXISTS clause inplace of IN operator.

Hi All,
Can any one tell me how to use EXISTS clause AND (JC.EMPL_ID, JC.EMPL_RCD) inplace of IN operator.
SELECT COUNT (1)
FROM SYSADM.OHR_PERS_CURR PC
, SYSADM.OHR_JOB_CURR JC
WHERE PC.EMPL_ID = JC.EMPL_ID
AND (JC.EMPL_ID, JC.EMPL_RCD) in (
SELECT HS.EMPL_ID, HS.EMPL_RCD
FROM SYSADM.HU_SCRTY_JOB HS, ODSHR.OHR_SCRTY_USER_CFG OS
WHERE HS.HU_SCRTY_CFG_ID = OS.HU_SCRTY_CFG_ID
AND OS.DB_LOGIN = USER)
Thank you.

SELECT COUNT (1)
FROM SYSADM.OHR_PERS_CURR PC
, SYSADM.OHR_JOB_CURR JC
WHERE PC.EMPL_ID = JC.EMPL_ID
AND EXISTS (
SELECT null
FROM SYSADM.HU_SCRTY_JOB HS, ODSHR.OHR_SCRTY_USER_CFG OS
WHERE HS.HU_SCRTY_CFG_ID = OS.HU_SCRTY_CFG_ID
AND OS.DB_LOGIN = USER
AND HS.EMPL_ID = JS.EMPL_ID AND HS.EMPL_RCD = JC.EMPL_RCD)
But why ?
Rgds.

Can any one tell me how to send one PO to mutilple mail ids in vendor maste

Hi Experts,
Can any one tell me how to send one PO as a mail to multiple vendors who are all maintained in my vendor master record
Suppose I have 3 mail ids in my Vendor master record and I created a PO with that vendor, will that PO goes to all the three mail ids maintained in the vendor master record or only to one ?
Inorder to send to multiple mail ids, Do we need to do any configure any thing in SPRO settings functionally, if so where we have to maintain?
Or shall an Abaper needs to maintain a code for that.?
Please suggest me, I would appreciate your feed back.
Best Regards,
Sairam

Go to XK02 enter the vendor code
go to the communication tab
Email will be there press the ---> button
you can add many Emails in the list.
Please ensure that the message output is configured by
the SAP BASIS team
No need of any configuration
G.Ganesh Kumar

Can any one tell me should it take 6-8 hours to charge my iPad 2?

Can any one tell me should it take 6-8 hours to charge my iPad 2?

I have a iPad 2, when I let it go dead and then I put it on charge it takes about 6-8 hours to fully charge. Is that the normal time it takes to charge or could there be something wrong with my iPad 2.

Can any one tell me how can i claim warranty of my my iphone charger online ?

Can any one tell me how can i claim warranty of my my iphone charger online ?

See the "Service -> How do I obtain service" section of this page:
http://www.apple.com/support/iphone/service/faq/
selecting your country as appropriate.
Regards.

Can any one tell best website to learn hyperion financial reporting

Can any one tell best website to learn hyperion financial reporting

Below are the latest User Guide and Admin guide for Financial Reporting.
Oracle Hyperion Financial Reporting Administrator's Guide Release 11.1.2.3.00
http://docs.oracle.com/cd/E40248_01/epm.1112/fr_webadmin.pdf
Oracle Hyperion Financial Reporting User's Guide Release 11.1.2.3.00
http://docs.oracle.com/cd/E40248_01/epm.1112/fr_webuser_11123500.pdf
let us known if you are looking at anything specific related to Financial Reporting.

Can any one tell me how to break this into separate columns 05/13/2014,"46","48","37","70","74","1","2","121000000.0000"

Can any one tell me how to break this into separate columns 05/13/2014,"46","48","37","70","74","1","2","121000000.0000"

Paste your content into TextEdit. Format > Make Plain Text.
Comand-S to save.
Command-Click the filename at the top of the TextEdit window. Click on the second line, the name of the folder where you saved the document.
Select the extension of the document Name in the finder window that is being displayed and replace TXT with CSV.
Right-Click the csv file and choose Open With > Numbers.
Numbers will open with a column for each field in your data.
Jerry

Hi can NE one tell me hwo to open an external file with it's defualt viewer

Similar Messages

Maybe you are looking for