Hi ... Can someone plz help ... I have purchased items on ebay, and my computer will not proceed from ebay to paypal to chekout (pay).

I have contacted my internet security, and through remote connection they said there was no problem with that so I should contact Ebay and Firefox. I contacted Ebay and there is no problem there. I know its not my accounts because I am able to check out using other computers and my phone ... Please HELP :)

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
You can also check the network.http.* prefs and reset all bold user set network.http prefs to the default value (network.http.proxy.keep-alive should be true) via the right-click context menu > Reset.
*http://kb.mozillazine.org/about:config
See also:
*https://support.mozilla.org/kb/Resetting+preferences

Similar Messages

  • TS1702 I have just updated my OS and now i have lost all my data and some apps will not reinstall from my computer.  Having to install from the cloud is slow as the band width is small here..  any advise

    I have just updated my IPADs OS to 6.1.2 this caused it to crash and i had to do a restore on the IPAD. Now some of the apps that i have will not reinstall directly from my computer.  living in a country with a slow internet,  uploading from the cloud is painfully slow.  Is there some way to get around this

    also must mention i have never had trouble that i couldn't fix on itunes but all of this has started since i have been using icloud for basic backups hope this helps solve problem

  • Hello. I have problem here can someone plz help. I have usb of 32 gb but i have problem with it while i was trying to partition of it and it fails and my usb disappear from finder and desktop i have tried every possible thing but nothing  works .

    Hello. I have problem here can someone plz help. I have usb of 32 gb but i have problem with it while i was trying to partition of it and it fails and my usb disappear from finder and desktop i have tried every possible thing but nothing  works .

    Yea i tried in disk utility and its got faiiled and the partitation has deleted and when i tried  to replug the  usb  msg show up by saying  usb not compaitnle. With this mac  and  take me to disk utility  and thanks for replying

  • Can someone please help, I have a dvd disk containing lecture videos, on a Windows pc it works fine, and the disk opens to the dvd menu. However on my macbook pro running Mountain Lion, it opens as a data disk, with video and audio in two seprate files??

    Can someone please help, I have a dvd disk containing lecture videos, on a Windows pc it works fine, and the disk opens to the dvd menu. However on my macbook pro running Mountain Lion, it opens as a data disk, with video and audio in two seprate files??

    You may need a 3rd party application to view the DVD in a wWindows format such as
    http://flip4mac-3.en.softonic.com/mac
    https://www.macupdate.com/app/iphone/5758/vlc-media-player

  • I keep the itunes encountered a problem and needs to shut down . it was working fine until after i updated to 10.5 can someone plz help

    i keep the itunes encountered a problem and needs to shut down . it was working fine until after i updated to 10.5 can someone plz help

    I did get a "server busy" message when I loaded quicktime, but I'm not sure if it is related or not since I've been seeing that over the last couple of days, I can't remember if it came before iTunes stopped working or not. That message reads "This action cannot be completed because the other program is busy. Choose 'switch to' to activate the busy program and correct the problem." My options then are to choose switch to or retry. When I press "switch to" my Start menu opens, and nothing appears to happen when I select retry.
    that's an odd sort of a message (or series of messages).
    hmmmmm. let's try an experiment aimed at working out if there's a program interfering with the QuickTime (which is in turn causing grief with your iTunes).
    try a selective startup using MSCONFIG, with just the itunes and QuickTime background processes enabled, as per the following document:
    Using MSCONFIG to troubleshoot conflicts in Windows
    does QT open without the strange message after the selective startup?
    does iTunes launch properly?

  • My iPad mini has not been charging well recently but i have purchased a new cable and it still is not charging and has no battery. Someone Help  PLEASE

    My iPad mini has not been charging well recently but i have purchased a new cable and it still is not charging and has no battery. Someone Help  PLEASE

    1. Reset iPad; hold the Sleep/Wake and Home button down until you see the Apple Logo
    2. Try another wall socket
    3. Try another cable (make sure it's an original Apple cable)
    4. Try another charger (make sure it's an original Apple charger)
    5. Clean Lightning port with compress air or new paint brush

  • I have up dated my itune and now it will not play my old purchase movies. I have brought new ones and they work but my old purchases will not. Why and how can I fix it.

    I have up dated my itune and now it will not play my old purchase movies. I have brought new ones and they work but my old purchases will not. Why and how can I fix it.

    Contacts are designed to be synced to a supported application on the computer or a cloud service.
    Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
    If you have failed to use the device as designed it may be too late to recovery anything.
    Is the device regularly backed up to a computer via iTunes?  If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created.

  • I have an iphone 4s and i keep getting an error message when ever i try to activate i have already restored the phone and it still will not work. any help would be greatly appreciated

    I have an iphone 4s and i keep getting an error message when ever i try to activate i have already restored the phone and it still will not work. any help would be greatly appreciated

    Activation issues are almost always the result of a device that has been hacked or jailbroken.  If that is the case, no support can be provided here.

  • My wi-fi connection is enabled, however Safari is telling me the server stopped responding.  My laptop is working fine on the same wi-fi network.  I have reset the network settings and still Safari will not open any web pages.  Help!

    My wi-fi connection is enabled, however Safari is telling me the server stopped responding.  My laptop is working fine on the same wi-fe network.  I have reset the network settings and still Safari will not open any web pages.  Help!

    Ralph..........Did as you suggested and I am still getting the message "Safari could not open the page because the server stopped responding".  I am not able to connect with anything on the Internet.  Frustrating since I am able to connect with my laptop.  Thanks for the suggestion.

  • Mac OS 10.5 /  I deleted the " Private" folder ... and emptied the trash. So the folder and its contents no longer exists on my computer at all !!!  I do have the OS dvd that i purchased years ago...  But my computer will not start from it on its own. My

    Mac OS 10.5 /
    I deleted the " Private" folder ... and emptied the trash. So the folder and its contents no longer exists on my computer at all !!!
    I do have the OS 10.5 dvd that i purchased years ago...
    But my computer will not start from it on its own.
    My question is what is the open source or terminal language code used to tell my mac to look in the DVD rom drive for startup info?  I know that im not the only person in this world who has deleted the "PRIVATE" folder and emptied the trash so it no longer exists on their machine...
    That said theres gotta be a common fix for a Power PC G4 that has the OS X dvd in the rom drive but wont look to it to reinstall the vital contents of the PRIVATE folder.
    Once again there is not a copy of this file or its contents in the recycle bin...
    Also rebooting the machine , pressing and holding the letter C does not prompt the machine to look to the dvd rom drive.
    I was reinstalling pro tools and figured I would make some room by cleaning my computers HD...
    Lol It was a bad choice to delete this file ...
    Thanks guys

    Okay sorry it took forever to respond... But for a while there I gave up on this computer!!!!
    Money's been tight lately , so taking it in to a professional was not yet an option... though I did consider it eventhough.
    Anyway long story short im glad I didnt spend any money because I already had all the tools necessary to fix this issue but was going about it in the wrong way. Okay so here is my scenario and the breakdown... Though this may not fix the issue for everyone :( which *****... But I know we all will have different circumstances.
    Anyway here we go...
    Okay so first things first....  Years ago I purchased the OS 10.5.1 disk ... So that has always been in my possession!!!!
    I realize that some may not have a disk to reflash your OS to your hard drive... but if you do your in luck.
    2ndly ... I had an external harddrive with all of my itunes downloaded music so it was more than okay with me to delete my primary HD because all the important stuff could either be copied over or repathed to be located.
    -------If you dont want to read through the whole story the fix is summed up in the bottom section-------
    Okay so now the SOLUTION!!!!
    By trial and error , and pure boredom I opened up my computer to clean the inside...
    AND
    "Disconnected the primary HD"
    and just because ....... REBOOTED my computer. Just to see what it would do.
    Upon restart and though it looked like it would repeat its usual cycle...
    About 1 minute in to that process my computer froze for about 2 seconds and flashed to the OS installation screen.
    Mind you I havent seen this screen yet... Probably hasnt been since I installed the OS years ago.
    After a bit of trial and error...
    I decided to tell my computer to startup from the OS 10.5 disk located in my dvd rom drive and restarted once again...
    this setting is under
    Utilities / startup disk
    After a little more trial and error ... I realized that I could reconnect the primary HD , restart the machine and return to the OS installation menu.
    So upon this discovery
    I went to the Disk Utility located under Utilities
    Highlighted my primary HD located in the left hand column
    Once highlighted ...
    In the heading section on the right I selected the option
    Erase
    in which I erased My current OS on my primary HD ...
    I used the first option in the list under security... Because it seemed like the least invasive and would take the least amount of time to see if this process would actually work.
    I FORGOT to add something... 
    Another reason why I deleted my primary HD!!!!!
    I forgot to say that it WOULD NOT!!!!! Show up in the STARTUP list as an option...Even After multiple reboots....
    But like clockwork... Once I deleted its name IT SHOWED UP as an option!!!!
    So back to the next step...
    I returned to the STARTUP option under utilities ... And was then able to see MY primary HD now as a startup option...
    But ofcourse it had no name because it we previously erased it.
    So when Clicking my newly erased HD ... I was almost immediately prompted to REINSTALL the OS ...
    Which said it would take about 57 minutes ... But I believe was alot less...
    My issue was resolved ... My computer then stated the install was SUCCESSFUL!!!!!!! :))))))))))) lol ;)
    It was like I was setting up for the first time ;) asking for my registration info...
    The dilemma of deleting the private folder and emptying the trash is finally over resolved. Done ... and no extra money spent!!!!!!!!! 
    Its really crazy that the information for such a simple thing is not readily available. Especially being such a simple fix.
    I know im not the only person who's had this issue , because i've seen numerous posts with similar wording.
    I also know I wont be the last person to have this issue... So I hope this synopsis makes sense.
    -------One more time the fix------
    *Insert your OS dvd into your dvd rom drive.
    *Unplug your primary HD or corrupted startup disk
    *Reboot your machine...
    Upon restart your primary HD will not be recognized...
    * you will then be prompted to select your language.
    Once selected
    *Click Utilities/startup... Highlight the the selection that refers to the OS dvd located in the dvd rom drive.
    * Click restart...
    !!!!!!!!!!Be sure to reconnect your Primary HD Before your computer restarts and you hear the chime!!!!!!!!
    If you do not replug your HD before the chime it will not be recognized.
    In that case restart again.
    Upon restart once again
    *Choose your language...
    *Click Utilities / disk utility
    In the left column select and
    *Highlight your HD ...
    Then towards the top portion / center of the page
    *Click the heading Erase
    Then on the page toward the bottom
    *Click security options
    This will then provide erase options.
    I USED THE FIRST OPTION
    "Dont erase data"...
    *click OK
    * click erase...
    Once erased which should take a few seconds
    *Cancel the disk utility...
    * Click Utilities / startup
    And your newly erased HD should now appear in the list.
    * Select your drive from the list by highlighting
    It should no longer have a name.
    *Once selected, you will then be prompted to restart and install the OS to your newly erased HD...
    Thats it!!!!
    Once everything reinstalls re-add your personal info or registration info and you are up and running.
    Goodluck ;)

  • I have an iPod Classic 160GB and now it will not sync.  I have restored to factory settings multiple times.  It freezes during sync, gives -50 error code and says video is not supported on iPod.  Please help.

    I have an iPod Classic 160GB and now it will not sync.  I have restored to factory settings multiple times.  It freezes during sync, gives -50 error code and says video is not supported on iPod.  Please help.

    This is the iPod touch forum. I requested the moderators to move your post to the iPod classic forum.

  • I have apps on my iPad and my computer is not connected to the Internet. How do I get my apps to load on the computer ? Because it says the apps on my iPad will be replaced with the apps that are on the computer but there is none there!

    I have apps on my iPad and my computer is not connected to the Internet. How do I get my apps to load on the computer ? Because it says the apps on my iPad will be replaced with the apps that are on the computer but there is none there!

    Authorize the computer in iTunes -- Store>Authorizie this computer.  Transfer the purchases from the iPad into iTunes and then you can sync with iTunes. Read this for instructions on transferring purchases from the iPad into iTunes.
    Transfer purchases.
    http://support.apple.com/kb/HT1848

  • When i turned on my i pod a white apple logo was shown which then turned to rainbow colours and the i pod started buffering, this is all it does, i cannot get it to stop and my computer will not talk to the i pod, help?

    when i turned on my i pod a white apple logo was shown which then turned to rainbow colours and the i pod started buffering, this is all it does, i cannot get it to stop and my computer will not talk to the i pod, help?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My IPOd will not charge. I have bought a new USB and it still will not charge

    My IPod will not charge. I have bought a new usb and it still will not charge.

    Have a read of this it may help. http://support.apple.com/kb/TA44551

  • My google calendar will not load it says that is being redirected and will never complete. I have done what was requested and it still will not work?

    My google calendar will not load it says that is being redirected and will never complete. I have done what was requested and it still will not work?

    Clear the cache and the cookies from sites that cause problems.
    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    See also:
    * http://kb.mozillazine.org/The_page_is_not_redirecting_properly

Maybe you are looking for

  • Opening panel to build an applicatio​n causes error 7

    As soon as I open the panel to "Build Application or Shared Library (DLL)" I get an error: "Error 7 occurred at Open VI Reference in Dist Call Set Busy.vi->Dist Cmp Setting to Disk Heir.vi->Build Application.vi" I can appear to setup the build, but w

  • Applications continue to "quit unexpectedly".

    I'm sorry this is so long, but please consider reading it. Alright, I've saved about 175 GB worth of pictures and videos on my MacBook Pro. It said I needed a Software Update. So, I agreed, but found I didn't have enough memory for one. I deleted a f

  • How do you add new slides to a slideshow?

    As the title says... The slideshow templates in Muse only let you edit 3 slides, and I need at least 6. But I can't find how to add more even in the "blue arrow pop-up menu".

  • Make to Order Sales Process

    Dear All I have been assigned  to work on make to order sales process.So far I have worked only on third party sales process. Here we need to trigger production order from Sales Order. Can you plz help me out in configuring? Any inputs will be highlt

  • Creating IT00 and retrieving pernr

    Hi Guys,           Generally when we do hiring in R/3, after creating IT0000 we get the pernr (internal). How to achieve this through BAPI? I know we cannot perform action thru BAPI. But what I am doing is I am creating each infotype (00, 01, 02, 06,