Hi,Can we upload a Report to a webserver?What are the steps involved?

Hi,
Can we upload a Report to a webserver?What are the steps involved?It would be helpfull if any pointers are given.
Gani

Hi,
yepp, you can do that. Please use the transaction SE38 for downloading
the report source to your PC. Afterwards you can use a ftp client or other
network copy techniques for uploading the report to your web sever.
regards
Tobias

Similar Messages

What are the steps in creating a customised report?

Dear Experts,
can you help me with your expereince what are the steps involved in creating a customised report?
Who generates the requirement?
Who prepares the functional spec and what information it contains?
Who approves the functional spec once it is prepared?
You can take the followig case as an example:
The customer requirement is that a report can be run for everything that is received in a given area and compare the price at which the material was received to the standard or moving average price in SAP.
Here, what information you will give to ABAP ers to devlop the report?
I would appreciate if anyone can help me with the entire process.
Full points to be awarded for a satisfactory reply.
Regards,
Ranjan

hi
>Who generates the requirement?
client or end user
>Who prepares the functional spec and what information it contains
there should be a specific format and it is to be filled by the functional consultant
http://www.sap-img.com/general/what-are-functional-specification-in-sap.htm
http://erp.ittoolbox.com/groups/project-management/erp-projectmanagement/samples-for-sap-functional-specification-1194336
>Who approves the functional spec once it is prepared?
abaper or the TL
http://sap.niraj.tripod.com/id67.html
get the proper info from ur customer as what means all information
get the proper fields he required
regards
KI

Hi i have an iphone 4 which is from canada nd i have seen one sim inside it which is a canadian sim ,iam staying in india so can i use that phone in india and please tell me what are the steps ihave to take for using that canadian phone in india

hi i have an iphone 4 which is from canada nd i have seen one sim inside it which is a canadian sim ,iam staying in india so can i use that phone in india and please tell me what are the steps ihave to take for using that canadian phone in india

Only the carrier to whom the device is locked can authorize it's unlocking. Contact the carrier to see if they offer unlocking and if you qualify.

Just got a iMac12,2 Intel Core i7, 3.4 GHz with OS X 10.8 loaded. Can't get earthlink email to work. What are the proper settings?

Just got a iMac12,2 Intel Core i7, 3.4 GHz with OS X 10.8 loaded. Can't get earthlink email to work. What are the proper settings?

Hello, see if this helps...
http://support.earthlink.net/articles/browsers/mac-os-x-10.5-manual-setup-of-mai l.php

What are the steps we have to fallow to upload data through IDOC in LSMW?

What are the steps we have to fallow to upload data through IDOC in LSMW?

HI
see this link click on each link it will show you step and screen shot of that step
http://www.****************/Tutorials/LSMW/IDocMethod/
<b>Rewar di fusefull</b>

15 minutes ago I purchased the perfect browser. I'm not experienced with computers and it's more that if can handle at this time. What are the steps I need to do.

15 minutes ago I purchased the perfect browser. I'm not experienced with computers and it's more that if can handle at this time. What are the steps I need to do.

It's a browser from App Store. " the perfect browser ". I couldn't find any information for refunds . I'm just learning about ios7 and it's well above my level.at this time

*what are the step by step events trigger in interactive report*

Hi gurus,
pls explain event by event triggers in interactive report.
points will be rewarded.
Thanks,
Balakrishna.

Hi,
Interactive reporting allows the user to participate in retrieving and presenting data at each level during the session. Instead of presenting one extensive and detailed list with cluttered information, with interactive reporting you can create a condensed basic list from which the user can call detailed information by positioning the cursor and entering commands.
Detailed information is presented in secondary lists. A secondary list may either overlay the basic list completely or appear in an additional dialog window on the same screen. The secondary list can itself be interactive again. The basic list is not deleted when secondary list is created.
User can interact with the system by:
u2022     Double clicking or pressing F2
u2022     Selecting menu option
Like classical report, the interactive report is also event driven. Both the action mentioned above trigger events and code is written to handle these events. The events triggered by this action are as follows:
u2022     At line-selection
u2022     At user-command
u2022     Top-of-Page During Line-Selection for Secondary Page Header info
Interactive report consists of one BASIC list and 20 secondary list. Basic list is produced by START-OF-SELECTION event. When the user double clicks on the basic list or chooses the menu option, the secondary list is produced. All the events associated with classical report except end-of-page are applicable only to basic list.
AT LINE-SELECTION event
Double clicking is the way most users navigate through programs. Double clicking on basic list or any secondary list triggers the event AT LINE-SELECTION. SY-LSIND denotes the index of the list currently created. For BASIC list it is always 0. Following piece of code shows how to handle the event.
Start-of-selection.
Write: / u2018this is basic listu2019.
At line-selection.
Write : u2018this is first secondary listu2019.
In this case the output will be displayed on basic list i.e.
This is basic list.
When user double clicks on this line, the event at line-selection gets triggered and secondary list is produced, i.e. This is first secondary list.
You can go back to basic list by clicking on F3 or back icon on the standard tool bar. For this list, the value of sy-lsind will be 1.
HIDE technique
In this case thins are much simpler. Consider the case, wherein you display fields from table sflight in basic list. When user double clicks on any sflight-carrid, you are displaying the detailed information related to that particular carrid on secondary list. Hence there is a need to store the clicked carrid in some variable. So that you can access this carrid for next list. ABAP/4 has facility; a statement called HIDE, which provides the above functionality.
HIDE command temporarily stores the content of clicked field in system area.
Syntax:
HIDE <FIELDS>.
This statement stores the contents of variable <f> in relation to the current output line (system field SY-LINNO) internally in the so-called HIDE area. The variable <f> must not necessarily appear on the current line.
You have to place the HIDE statement always directly after the output statement i.e., WRITE for the variable <f>. As when you hide the variable, control is passed to next record. While writing, WRITE statement takes that record from header and writes it on to the list, but when writing onto your interactive list you will miss out 1st record.
To hide several variables, use chain HIDE statement.
As soon as the user selects a line for which you stored HIDE fields, the system fills the variables in the program with the values stored. A line can be selected.
u2022     By an interactive event.
For each interactive event, the HIDE fields of the line on which the cursor is positioned during the event are filled with the stored values.
The HIDE area is a table, in which the system stores the names and values of all HIDE fields for each list and line number. As soon as they are needed, the system reads the values from the table. (Please try to find the name of this table.)
Sy-lsind indicates the index of the list and can be used to handle all the secondary lists. When the user double clicks on the line or presses F2, sy-lsind is increased by one and this new sy-lsind can be handled. For example:
Write: / u2018this is basic listu2019.
u2022     Will create a basic list.
If sy-lsind = 1.
Write: / u2018this is first secondary listu2019.
Elseif sy-lsind = 2.
Write: / u2018This is second secondary listu2019.
Endif.
When this code is executed,
u2022     Basic list is produced.
u2022     When the user clicks on the basic list, sy-lsind becomes one.
u2022     AT LINE-SELECTION event is triggered.
u2022     Whatever is written under IF Sy-lsind = 1, gets executed.
u2022     Secondary list is produced.
u2022     Again if user clicks on this list, sy-lsind becomes two.
u2022     AT LINE-SELECTION gets triggered.
u2022     Code written under IF Sy-lsind = 2, gets executed.
A sample program for AT LINE-SELECTION.
AT USER-COMMAND
When the user selects the menu item or presses any function key, the event that is triggered is AT USER-COMMAND, and can be handled in the program by writing code for the same. The system variable SY-UCOMM stores the function code for the clicked menu item or for the function key and the same can be checked in the program. Sample code would look like
AT USER-COMMAND.
Case sy-ucomm.
When u2018DISPu2019.
        Select * from sflight.
        Write sflight-carrid, sflight-connid.
        Endselect.
When u2018EXITu2019.
     LEAVE.
If GUI status, suppose you have set menu bar for two items and the function code is u2018DISPu2019 and u2018EXITu2019 respectively. If the user clicks the menu item u2018DISPLAYu2019, then function code u2018DISPu2019 is stored in the sy-ucomm and whatever is written under the when u2018DISPu2019, gets executed. This is applicable for EXIT as well.
Sy-lsind for the screen increases when the user clicks the menu item.
Usually you have combination of all the three navigations in your user interface, i.e., you have to create menu bar, assign function code for the function keys and write code to handle all this in addition to handling double clicking.
Things to remember while using all the combinations:
u2022     Sy-lsind increases even if you select menu-item.
u2022     When the user double clicks on particular line, value of sy-ucomm is u2018PICK.
u2022     If you set sy-lsind = 2 for your 4th secondary list, when control is transferred to the 2nd secondary list, all the other lists after 2nd are lost or memory allocated to them is lost.
u2022     Sy-lisel also gives you the value of clicked line but in this case you cannot differentiate between field. To retrieve the exact field, you have to know the field length of each field.
u2022     If you use statement SY-LSIND = 1.
The system reacts to a manipulation of SY-LSIND only at the end of an event, directly before displaying the secondary list. So, if within the processing block, you use statements whose INDEX options access the list with the index SY-LSIND, make sure that you manipulate the SY-LSIND field only after processing these statements. The best way is to have it always at the `as the last statementu2019 of the processing block.
Regards,
Bhaskar

Photoshop CS3, can't import RAW2 what are the steps to succeed?

Hi
It all started with taking stills with a new Panasonic DSLR. I shot RAW2.
I tried to open at Photoshop CS3 but, though the files are recognized, I can't select them.
I seek guidance to take appropriate steps to resolve this. Thank you for your time. -n
Steps I took to trouble-shoot:
I updated my Camera Raw plug-in from 4.0 to 4.6
I did that separatly online, without using the Update mode [Adobe Updater] in Photoshop CS3.
I then tried to update Adobe updater to 5.1.1, from my computer, but I received this message:
"Setup has encountered an error and cannot continue. Contact Adobe Customer Support for assistance"
I did convert succesfully to .DNG and can review the files in Photoshop CS3 but they are over-saturated, creating
hot spots, which makes me suspect I made a mistake during convertion.

a new Panasonic DSLR.
Which Panasonic camera exactly?
Supported cameras are listed here
Camera Raw plug-in | Supported cameras

What are the steps to upload zipped LMS output from UPK into iLearning?

Please would someone be kind enough to detail the steps to import zipped LMS output from UPK into iLearning or point me to where I can find this information?
Many thanks.

The zipped output from UPK contains a few folders within the zip file itself before you get to the area within the zip where the imsmanifest.xml file is. You need to repackage the zip so that the imsmanifest.xml and related .xsd files are at the "root" of the zip file, rather than in a directory within the zip.
So basic steps are as follows:
1. Extract the zip file locally to your hard drive.
2. Navigate down the newly created folder structure until you see the imsmanifest.xml file.
3. Add/replace the .xsd files in this location with the iLearning specific XSD files that you can get on metalink
4. Select all the files in this directory (including the folders in this directory like "audio", "certificate", "help", "images" etc), then right click and add to a new zip file. This will ensure that the new zip file contains the imsmanifest.xml and related xsd files at the root of the zip file rather than buried in a folder.
5. Import as SCORM 1.2 in iLearning and off you go.
Hope that helps.
Scott
http://www.seertechsolutions.com

My ipad with retina display can't find my epson artisan 730 wireless printer. They are on the same network and printer's wireless connection is excellent. What are the steps to fix this?

My imac won't pick up the printer either. Even after I updated it's software. My ipad is new. Any help would be appreciated. Thanks!

No change. The printer still doesn't show up on my devices even though they are all on the same network. On the printer's connection print out the connection reads Pass and that the network is working correctly. However, then it states "*A router/access point channel conflict has been detected. If you have problems printing or scanning, Improve your wireless network environment." "*If the problems persist, see your documentation for help and networking tips."
I've gone through all the documentation and still can't figure out what the problem is. I've had the router checked out by my building and they claim everything is in order. I have a excellent signal.

After inserting a DVD of numerous 8mm movies, what are the steps to move them into iDVD so titles can be added and a new DVD created?

I have a DVD containing numerous 8mm movies and I would like to insert titles before each movie and then create a new DVD. When I insert the DVD, it's icon appears on my desktop and I can play the movies on my monitor by double cliking the icon. When I bring up iDVD it indicates I should simply drag movies or pictures into iDVD, review them and then burn a new DVD. When I attempt to drag the DVD icon into iDVD nothing happens. I must be missing some steps. How can I make this happen?

Try posating in the iDVD forum
https://discussions.apple.com/community/ilife/idvd

How can I check how much memory is on my external hard drive after I plug it in. What are the steps I need to go through?

Im looking for a specific how to on checking how much memory I have left on and external HD. Any help would be wonderful.
V/R
Chris

If you're on your Mac OS, click on the little Apple sign in the top left corner of the screen and select About This Mac. Then, if you have your external HD plugged in, go to Storage, and there you should see all HDs (internal and external, USBs, etc) space and how much you have left on them. On a Windows OS, just go to My Computer to see.

HT201209 I have a credit in itunes account, but when I click on "redeem" it asks me for a gift cared or download code. what are the steps to access the credit I have so I can purchase more music?

I have a credit in my itunes account, but when I click on "redeem" it asks me to enter a gift card or download code. what are the steps to go in and be able to redeem the credit I have? If I go to an album that I want to use my credit on, the only choice I am seeing is to use the credit card on file. Help!

It says   at the top      under Redeem after I touched that:
          $14.73
Account: [email protected]   (my account name)
Enter your Gift Card or Download Coad

HT201270 i have the original iPad, can i put it on a verizon plan? if so, what are the steps/

thanks
Mj

Did you purchase the Verizon version, AT&T vesion, or Wi-Fi only version?
If you have the Verizon version, contact them about pricing information.
If you have the AT&Tversion, contact them about pricing information. This model does not have the hardware necessary to connect to Verizon's network.
If you have the Wi-Fi only version, buy a MiFi from Verizon or AT&T, or continue using it only on Wi-Fi. This model does not have the hardware necessary to connect to any cellular network.

Can anybody share the steps involved in Rebuildable in oracle eAM

Hi,
Iam enable to do a flow on Rebuildable in oracle eam, Could anybody helps the steps involved in Rebuild able and Preventive Maitenance.
It will be helps me alot.
Advanced thanks
[email protected]

What are the steps involved in configuring Oracle EBS R12 after installation is complete?
We have an empty oracle EBS R12 installed and up and running. We do not have anything configured.
Please direct me to the documents that can be followed to do initial steps for the application functionality to work.All Oracle EBS Docs 11i/R12 can be found at:
Oracle Applications Documentation
http://www.oracle.com/technetwork/documentation/applications-167706.html
Thanks,
Hussein

Hi,Can we upload a Report to a webserver?What are the steps involved?

Similar Messages

Maybe you are looking for